diff options
| author | Jonas Gorski <jogo@openwrt.org> | 2015-03-25 15:35:12 +0000 |
|---|---|---|
| committer | Jonas Gorski <jogo@openwrt.org> | 2015-03-25 15:35:12 +0000 |
| commit | 2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f (patch) | |
| tree | 0d96527eccb0e68a4bddf9cf90cc07c5a057f4b4 /target/linux/brcm63xx/base-files/etc | |
| parent | 065d6e9047d235ffa916dcf0ce330bfc124e2fd0 (diff) | |
| download | upstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.tar.gz upstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.tar.bz2 upstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.zip | |
brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 44985
Diffstat (limited to 'target/linux/brcm63xx/base-files/etc')
| -rw-r--r-- | target/linux/brcm63xx/base-files/etc/diag.sh | 4 | ||||
| -rw-r--r-- | target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds | 6 | ||||
| -rw-r--r-- | target/linux/brcm63xx/base-files/etc/uci-defaults/02_network | 3 |
3 files changed, 12 insertions, 1 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh index 928c02ba10..03d98b9146 100644 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ b/target/linux/brcm63xx/base-files/etc/diag.sh @@ -72,6 +72,10 @@ set_state() { fast2704v2) status_led="F@ST2704V2:green:power" ;; + homehub2a) + status_led="HOMEHUB2A:green:upgrading" + status_led2="HOMEHUB2A:blue:upgrading" + ;; gw6200) status_led="GW6200:green:line1" status_led2="GW6200:green:tel" diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds index c9bf2f412d..58404a165f 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds @@ -34,6 +34,12 @@ hg556a_*) ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0" ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2" ;; +homehub2a) + ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1" + ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0" + ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1" + ;; esac ucidef_commit_leds diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index df4e29307b..814e1003cd 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -66,7 +66,8 @@ v2500v_bb) dsl-274xb-c |\ hg553 |\ -hg556a_*) +hg556a_* |\ +homehub2a) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "eth0" "1" "1" ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t" |