aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/base-files/etc
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2015-03-25 15:35:12 +0000
committerJonas Gorski <jogo@openwrt.org>2015-03-25 15:35:12 +0000
commit2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f (patch)
tree0d96527eccb0e68a4bddf9cf90cc07c5a057f4b4 /target/linux/brcm63xx/base-files/etc
parent065d6e9047d235ffa916dcf0ce330bfc124e2fd0 (diff)
downloadupstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.tar.gz
upstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.tar.bz2
upstream-2d3371cd0fa1bd3631633ad9c2ddd1d232d8397f.zip
brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <tahir00ali@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 44985
Diffstat (limited to 'target/linux/brcm63xx/base-files/etc')
-rw-r--r--target/linux/brcm63xx/base-files/etc/diag.sh4
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds6
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/02_network3
3 files changed, 12 insertions, 1 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 928c02ba10..03d98b9146 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -72,6 +72,10 @@ set_state() {
fast2704v2)
status_led="F@ST2704V2:green:power"
;;
+ homehub2a)
+ status_led="HOMEHUB2A:green:upgrading"
+ status_led2="HOMEHUB2A:blue:upgrading"
+ ;;
gw6200)
status_led="GW6200:green:line1"
status_led2="GW6200:green:tel"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index c9bf2f412d..58404a165f 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -34,6 +34,12 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
+homehub2a)
+ ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
+ ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
+ ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
+ ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index df4e29307b..814e1003cd 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -66,7 +66,8 @@ v2500v_bb)
dsl-274xb-c |\
hg553 |\
-hg556a_*)
+hg556a_* |\
+homehub2a)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"