brcm47xx: remove support for kernel 3.0

SVN-Revision: 31276

53 files changed, 0 insertions, 8860 deletions

diff --git a/target/linux/brcm47xx/config-3.0 b/target/linux/brcm47xx/config-3.0
deleted file mode 100644
index ddf2b2fea8..0000000000
--- a/target/linux/brcm47xx/config-3.0
+++ /dev/null
@@ -1,140 +0,0 @@
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARPD is not set
-# CONFIG_ATH79 is not set
-CONFIG_B44=y
-CONFIG_B44_PCI=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BRCMUTIL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_LANTIQ is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_MACH_NO_WESTBRIDGE=y
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_BCM47XX_PFLASH=y
-CONFIG_MTD_BCM47XX_SFLASH=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_USB_HCD_BCMA is not set
-# CONFIG_USB_HCD_SSB is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch b/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch
deleted file mode 100644
index 5dd648da3c..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch
+++ /dev/null
@@ -1,443 +0,0 @@
-From 18fe82b600f9563e59e28746211a2ce3176a81de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:36 +0200
-Subject: [PATCH 08/26] bcm47xx: prepare to support different buses
-
-Prepare bcm47xx to support different System buses. Before adding
-support for bcma it should be possible to build bcm47xx without the
-need of ssb. With this patch bcm47xx does not directly contain a
-ssb_bus, but a union contain all the supported system buses. As a SoC
-just uses one system bus a union is a good choice.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/gpio.c                     |   56 ++++++++++++++++----------
- arch/mips/bcm47xx/nvram.c                    |   15 +++++--
- arch/mips/bcm47xx/serial.c                   |   13 +++++-
- arch/mips/bcm47xx/setup.c                    |   33 ++++++++++++---
- arch/mips/bcm47xx/time.c                     |    9 +++-
- arch/mips/bcm47xx/wgt634u.c                  |   14 ++++--
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |   14 ++++++-
- arch/mips/include/asm/mach-bcm47xx/gpio.h    |   55 ++++++++++++++++++-------
- drivers/watchdog/bcm47xx_wdt.c               |   12 +++++-
- 9 files changed, 160 insertions(+), 61 deletions(-)
-
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
- 
- int gpio_request(unsigned gpio, const char *tag)
- {
--	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
--	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
--		return -EINVAL;
--
--	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
--	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
--		return -EINVAL;
--
--	if (test_and_set_bit(gpio, gpio_in_use))
--		return -EBUSY;
--
--	return 0;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-+		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-+			return -EINVAL;
-+
-+		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-+		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+			return -EINVAL;
-+
-+		if (test_and_set_bit(gpio, gpio_in_use))
-+			return -EBUSY;
-+
-+		return 0;
-+	}
-+	return -EINVAL;
- }
- EXPORT_SYMBOL(gpio_request);
- 
- void gpio_free(unsigned gpio)
- {
--	if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
--	    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
--		return;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-+		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-+			return;
-+
-+		if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-+		    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+			return;
- 
--	if (ssb_extif_available(&ssb_bcm47xx.extif) &&
--	    ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+		clear_bit(gpio, gpio_in_use);
- 		return;
--
--	clear_bit(gpio, gpio_in_use);
-+	}
- }
- EXPORT_SYMBOL(gpio_free);
- 
- int gpio_to_irq(unsigned gpio)
- {
--	if (ssb_chipco_available(&ssb_bcm47xx.chipco))
--		return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
--	else if (ssb_extif_available(&ssb_bcm47xx.extif))
--		return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
--	else
--		return -EINVAL;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
-+			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
-+		else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
-+			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
-+		else
-+			return -EINVAL;
-+	}
-+	return -EINVAL;
- }
- EXPORT_SYMBOL_GPL(gpio_to_irq);
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE];
- /* Probe for NVRAM header */
- static void early_nvram_init(void)
- {
--	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-+	struct ssb_mipscore *mcore_ssb;
- 	struct nvram_header *header;
- 	int i;
--	u32 base, lim, off;
-+	u32 base = 0;
-+	u32 lim = 0;
-+	u32 off;
- 	u32 *src, *dst;
- 
--	base = mcore->flash_window;
--	lim = mcore->flash_window_size;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-+		base = mcore_ssb->flash_window;
-+		lim = mcore_ssb->flash_window_size;
-+		break;
-+	}
- 
- 	off = FLASH_MIN;
- 	while (off <= lim) {
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -23,10 +23,10 @@ static struct platform_device uart8250_d
- 	},
- };
- 
--static int __init uart8250_init(void)
-+static int __init uart8250_init_ssb(void)
- {
- 	int i;
--	struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
-+	struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
- 
- 	memset(&uart8250_data, 0,  sizeof(uart8250_data));
- 
-@@ -45,6 +45,15 @@ static int __init uart8250_init(void)
- 	return platform_device_register(&uart8250_device);
- }
- 
-+static int __init uart8250_init(void)
-+{
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		return uart8250_init_ssb();
-+	}
-+	return -EINVAL;
-+}
-+
- module_init(uart8250_init);
- 
- MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -35,15 +35,22 @@
- #include <bcm47xx.h>
- #include <asm/mach-bcm47xx/nvram.h>
- 
--struct ssb_bus ssb_bcm47xx;
--EXPORT_SYMBOL(ssb_bcm47xx);
-+union bcm47xx_bus bcm47xx_bus;
-+EXPORT_SYMBOL(bcm47xx_bus);
-+
-+enum bcm47xx_bus_type bcm47xx_bus_type;
-+EXPORT_SYMBOL(bcm47xx_bus_type);
- 
- static void bcm47xx_machine_restart(char *command)
- {
- 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
- 	local_irq_disable();
- 	/* Set the watchdog timer to reset immediately */
--	ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
-+		break;
-+	}
- 	while (1)
- 		cpu_relax();
- }
-@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void)
- {
- 	/* Disable interrupts and watchdog and spin forever */
- 	local_irq_disable();
--	ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+		break;
-+	}
- 	while (1)
- 		cpu_relax();
- }
-@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct
- 	return 0;
- }
- 
--void __init plat_mem_setup(void)
-+static void __init bcm47xx_register_ssb(void)
- {
- 	int err;
- 	char buf[100];
-@@ -258,12 +269,12 @@ void __init plat_mem_setup(void)
- 		printk(KERN_WARNING "bcm47xx: someone else already registered"
- 			" a ssb SPROM callback handler (err %d)\n", err);
- 
--	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
-+	err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
- 				      bcm47xx_get_invariants);
- 	if (err)
- 		panic("Failed to initialize SSB bus (err %d)\n", err);
- 
--	mcore = &ssb_bcm47xx.mipscore;
-+	mcore = &bcm47xx_bus.ssb.mipscore;
- 	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
- 		if (strstr(buf, "console=ttyS1")) {
- 			struct ssb_serial_port port;
-@@ -276,6 +287,14 @@ void __init plat_mem_setup(void)
- 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
- 		}
- 	}
-+}
-+
-+void __init plat_mem_setup(void)
-+{
-+	struct cpuinfo_mips *c = &current_cpu_data;
-+
-+	bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
-+	bcm47xx_register_ssb();
- 
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -30,7 +30,7 @@
- 
- void __init plat_time_init(void)
- {
--	unsigned long hz;
-+	unsigned long hz = 0;
- 
- 	/*
- 	 * Use deterministic values for initial counter interrupt
-@@ -39,7 +39,12 @@ void __init plat_time_init(void)
- 	write_c0_count(0);
- 	write_c0_compare(0xffff);
- 
--	hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
-+		break;
-+	}
-+
- 	if (!hz)
- 		hz = 100000000;
- 
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int ir
- 
- 	/* Interrupts are shared, check if the current one is
- 	   a GPIO interrupt. */
--	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
-+	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- 				   SSB_CHIPCO_IRQ_GPIO))
- 		return IRQ_NONE;
- 
-@@ -132,22 +132,26 @@ static int __init wgt634u_init(void)
- 	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
- 	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- 	 */
-+	u8 *et0mac;
- 
--	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
-+	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-+		return -ENODEV;
-+
-+	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
- 
- 	if (et0mac[0] == 0x00 &&
- 	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- 	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
--		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-+		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
- 
- 		printk(KERN_INFO "WGT634U machine detected.\n");
- 
- 		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- 				 gpio_interrupt, IRQF_SHARED,
--				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
-+				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- 			gpio_direction_input(WGT634U_GPIO_RESET);
- 			gpio_intmask(WGT634U_GPIO_RESET, 1);
--			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
-+			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- 					    SSB_CHIPCO_IRQ_GPIO,
- 					    SSB_CHIPCO_IRQ_GPIO);
- 		}
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -19,7 +19,17 @@
- #ifndef __ASM_BCM47XX_H
- #define __ASM_BCM47XX_H
- 
--/* SSB bus */
--extern struct ssb_bus ssb_bcm47xx;
-+#include <linux/ssb/ssb.h>
-+
-+enum bcm47xx_bus_type {
-+	BCM47XX_BUS_TYPE_SSB,
-+};
-+
-+union bcm47xx_bus {
-+	struct ssb_bus ssb;
-+};
-+
-+extern union bcm47xx_bus bcm47xx_bus;
-+extern enum bcm47xx_bus_type bcm47xx_bus_type;
- 
- #endif /* __ASM_BCM47XX_H */
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio);
- 
- static inline int gpio_get_value(unsigned gpio)
- {
--	return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-+	}
-+	return -EINVAL;
- }
- 
- static inline void gpio_set_value(unsigned gpio, int value)
- {
--	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-+			     value ? 1 << gpio : 0);
-+	}
- }
- 
- static inline int gpio_direction_input(unsigned gpio)
- {
--	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
--	return 0;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
-+		return 0;
-+	}
-+	return -EINVAL;
- }
- 
- static inline int gpio_direction_output(unsigned gpio, int value)
- {
--	/* first set the gpio out value */
--	ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
--	/* then set the gpio mode */
--	ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
--	return 0;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		/* first set the gpio out value */
-+		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-+			     value ? 1 << gpio : 0);
-+		/* then set the gpio mode */
-+		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
-+		return 0;
-+	}
-+	return -EINVAL;
- }
- 
- static inline int gpio_intmask(unsigned gpio, int value)
- {
--	ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
--			 value ? 1 << gpio : 0);
--	return 0;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
-+				 value ? 1 << gpio : 0);
-+		return 0;
-+	}
-+	return -EINVAL;
- }
- 
- static inline int gpio_polarity(unsigned gpio, int value)
- {
--	ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
--			  value ? 1 << gpio : 0);
--	return 0;
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
-+				  value ? 1 << gpio : 0);
-+		return 0;
-+	}
-+	return -EINVAL;
- }
- 
- 
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -54,12 +54,20 @@ static atomic_t ticks;
- static inline void bcm47xx_wdt_hw_start(void)
- {
- 	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
--	ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
-+		break;
-+	}
- }
- 
- static inline int bcm47xx_wdt_hw_stop(void)
- {
--	return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
-+	switch (bcm47xx_bus_type) {
-+	case BCM47XX_BUS_TYPE_SSB:
-+		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+	}
-+	return -EINVAL;
- }
- 
- static void bcm47xx_timer_tick(unsigned long unused)
diff --git a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch b/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
deleted file mode 100644
index 5b5771a85b..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
+++ /dev/null
@@ -1,395 +0,0 @@
-From 1ba12ca9e05153fbc611918ec0ea4cd9ec97f2c8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 22 Jun 2011 22:16:35 +0200
-Subject: [PATCH 09/26] bcm47xx: make it possible to build bcm47xx without ssb.
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig                            |    8 +-------
- arch/mips/bcm47xx/Kconfig                    |   18 ++++++++++++++++++
- arch/mips/bcm47xx/Makefile                   |    3 ++-
- arch/mips/bcm47xx/gpio.c                     |    6 ++++++
- arch/mips/bcm47xx/nvram.c                    |    4 ++++
- arch/mips/bcm47xx/serial.c                   |    4 ++++
- arch/mips/bcm47xx/setup.c                    |    8 ++++++++
- arch/mips/bcm47xx/time.c                     |    2 ++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |    4 ++++
- arch/mips/include/asm/mach-bcm47xx/gpio.h    |   12 ++++++++++++
- arch/mips/pci/pci-bcm47xx.c                  |    6 ++++++
- drivers/watchdog/bcm47xx_wdt.c               |    4 ++++
- 12 files changed, 71 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm47xx/Kconfig
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -91,15 +91,8 @@ config BCM47XX
- 	select DMA_NONCOHERENT
- 	select HW_HAS_PCI
- 	select IRQ_CPU
--	select SYS_HAS_CPU_MIPS32_R1
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_LITTLE_ENDIAN
--	select SSB
--	select SSB_DRIVER_MIPS
--	select SSB_DRIVER_EXTIF
--	select SSB_EMBEDDED
--	select SSB_B43_PCI_BRIDGE if PCI
--	select SSB_PCICORE_HOSTMODE if PCI
- 	select GENERIC_GPIO
- 	select SYS_HAS_EARLY_PRINTK
- 	select CFE
-@@ -785,6 +778,7 @@ endchoice
- 
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
-+source "arch/mips/bcm47xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/jz4740/Kconfig"
---- /dev/null
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -0,0 +1,18 @@
-+if BCM47XX
-+
-+config BCM47XX_SSB
-+	bool "SSB Support for Broadcom BCM47XX"
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SSB
-+	select SSB_DRIVER_MIPS
-+	select SSB_DRIVER_EXTIF
-+	select SSB_EMBEDDED
-+	select SSB_B43_PCI_BRIDGE if PCI
-+	select SSB_PCICORE_HOSTMODE if PCI
-+	default y
-+	help
-+	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
-+
-+	 This will generate an image with support for SSB and MIPS32 R1 instruction set.
-+
-+endif
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,5 @@
- # under Linux.
- #
- 
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
- int gpio_request(unsigned gpio, const char *tag)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- 		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const ch
- 			return -EBUSY;
- 
- 		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request);
- void gpio_free(unsigned gpio)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- 		    ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio)
- 
- 		clear_bit(gpio, gpio_in_use);
- 		return;
-+#endif
- 	}
- }
- EXPORT_SYMBOL(gpio_free);
-@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free);
- int gpio_to_irq(unsigned gpio)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
- 			return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
-@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio)
- 			return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
- 		else
- 			return -EINVAL;
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE];
- /* Probe for NVRAM header */
- static void early_nvram_init(void)
- {
-+#ifdef CONFIG_BCM47XX_SSB
- 	struct ssb_mipscore *mcore_ssb;
-+#endif
- 	struct nvram_header *header;
- 	int i;
- 	u32 base = 0;
-@@ -35,11 +37,13 @@ static void early_nvram_init(void)
- 	u32 *src, *dst;
- 
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
- 		base = mcore_ssb->flash_window;
- 		lim = mcore_ssb->flash_window_size;
- 		break;
-+#endif
- 	}
- 
- 	off = FLASH_MIN;
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -23,6 +23,7 @@ static struct platform_device uart8250_d
- 	},
- };
- 
-+#ifdef CONFIG_BCM47XX_SSB
- static int __init uart8250_init_ssb(void)
- {
- 	int i;
-@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void
- 	}
- 	return platform_device_register(&uart8250_device);
- }
-+#endif
- 
- static int __init uart8250_init(void)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return uart8250_init_ssb();
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char
- 	local_irq_disable();
- 	/* Set the watchdog timer to reset immediately */
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
- 		break;
-+#endif
- 	}
- 	while (1)
- 		cpu_relax();
-@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void)
- 	/* Disable interrupts and watchdog and spin forever */
- 	local_irq_disable();
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- 		break;
-+#endif
- 	}
- 	while (1)
- 		cpu_relax();
- }
- 
-+#ifdef CONFIG_BCM47XX_SSB
- #define READ_FROM_NVRAM(_outvar, name, buf) \
- 	if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
- 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
-@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb(
- 		}
- 	}
- }
-+#endif
- 
- void __init plat_mem_setup(void)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+#ifdef CONFIG_BCM47XX_SSB
- 	bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
- 	bcm47xx_register_ssb();
-+#endif
- 
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -40,9 +40,11 @@ void __init plat_time_init(void)
- 	write_c0_compare(0xffff);
- 
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
- 		break;
-+#endif
- 	}
- 
- 	if (!hz)
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -22,11 +22,15 @@
- #include <linux/ssb/ssb.h>
- 
- enum bcm47xx_bus_type {
-+#ifdef CONFIG_BCM47XX_SSB
- 	BCM47XX_BUS_TYPE_SSB,
-+#endif
- };
- 
- union bcm47xx_bus {
-+#ifdef CONFIG_BCM47XX_SSB
- 	struct ssb_bus ssb;
-+#endif
- };
- 
- extern union bcm47xx_bus bcm47xx_bus;
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio);
- static inline int gpio_get_value(unsigned gpio)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigne
- static inline void gpio_set_value(unsigned gpio, int value)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- 			     value ? 1 << gpio : 0);
-+#endif
- 	}
- }
- 
- static inline int gpio_direction_input(unsigned gpio)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- 		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -50,6 +56,7 @@ static inline int gpio_direction_input(u
- static inline int gpio_direction_output(unsigned gpio, int value)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		/* first set the gpio out value */
- 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-@@ -57,6 +64,7 @@ static inline int gpio_direction_output(
- 		/* then set the gpio mode */
- 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- 		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -64,10 +72,12 @@ static inline int gpio_direction_output(
- static inline int gpio_intmask(unsigned gpio, int value)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
- 				 value ? 1 << gpio : 0);
- 		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned
- static inline int gpio_polarity(unsigned gpio, int value)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
- 				  value ? 1 << gpio : 0);
- 		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/arch/mips/pci/pci-bcm47xx.c
-+++ b/arch/mips/pci/pci-bcm47xx.c
-@@ -25,6 +25,7 @@
- #include <linux/types.h>
- #include <linux/pci.h>
- #include <linux/ssb/ssb.h>
-+#include <bcm47xx.h>
- 
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
-@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct
- 
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-+#ifdef CONFIG_BCM47XX_SSB
- 	int res;
- 	u8 slot, pin;
- 
-+	if (bcm47xx_bus_type !=  BCM47XX_BUS_TYPE_SSB)
-+		return 0;
-+
- 	res = ssb_pcibios_plat_dev_init(dev);
- 	if (res < 0) {
- 		printk(KERN_ALERT "PCI: Failed to init device %s\n",
-@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev
- 	}
- 
- 	dev->irq = res;
-+#endif
- 	return 0;
- }
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start(
- {
- 	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
- 		break;
-+#endif
- 	}
- }
- 
- static inline int bcm47xx_wdt_hw_stop(void)
- {
- 	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+#endif
- 	}
- 	return -EINVAL;
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch
deleted file mode 100644
index fc8b09d91b..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch
+++ /dev/null
@@ -1,410 +0,0 @@
-From d3fb63a710e1f04fed2c2703c6dce3531490c451 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:37 +0200
-Subject: [PATCH 10/26] bcm47xx: add support for bcma bus
-
-This patch add support for the bcma bus. Broadcom uses only Mips 74K
-CPUs on the new SoC and on the old ons using ssb bus there are no Mips
-74K CPUs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/Kconfig                    |   13 ++++++
- arch/mips/bcm47xx/gpio.c                     |   22 +++++++++++
- arch/mips/bcm47xx/nvram.c                    |   10 +++++
- arch/mips/bcm47xx/serial.c                   |   29 ++++++++++++++
- arch/mips/bcm47xx/setup.c                    |   53 +++++++++++++++++++++++++-
- arch/mips/bcm47xx/time.c                     |    5 ++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h |    8 ++++
- arch/mips/include/asm/mach-bcm47xx/gpio.h    |   41 ++++++++++++++++++++
- drivers/watchdog/bcm47xx_wdt.c               |   11 +++++
- 9 files changed, 190 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -15,4 +15,17 @@ config BCM47XX_SSB
- 
- 	 This will generate an image with support for SSB and MIPS32 R1 instruction set.
- 
-+config BCM47XX_BCMA
-+	bool "BCMA Support for Broadcom BCM47XX"
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select BCMA
-+	select BCMA_HOST_SOC
-+	select BCMA_DRIVER_MIPS
-+	select BCMA_DRIVER_PCI_HOSTMODE if PCI
-+	default y
-+	help
-+	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
-+
-+	 This will generate an image with support for BCMA and MIPS32 R2 instruction set.
-+
- endif
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const ch
- 
- 		return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-+			return -EINVAL;
-+
-+		if (test_and_set_bit(gpio, gpio_in_use))
-+			return -EBUSY;
-+
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio)
- 		clear_bit(gpio, gpio_in_use);
- 		return;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-+			return;
-+
-+		clear_bit(gpio, gpio_in_use);
-+		return;
-+#endif
- 	}
- }
- EXPORT_SYMBOL(gpio_free);
-@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio)
- 		else
- 			return -EINVAL;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -29,6 +29,9 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_SSB
- 	struct ssb_mipscore *mcore_ssb;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	struct bcma_drv_cc *bcma_cc;
-+#endif
- 	struct nvram_header *header;
- 	int i;
- 	u32 base = 0;
-@@ -44,6 +47,13 @@ static void early_nvram_init(void)
- 		lim = mcore_ssb->flash_window_size;
- 		break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+		base = bcma_cc->pflash.window;
-+		lim = bcma_cc->pflash.window_size;
-+		break;
-+#endif
- 	}
- 
- 	off = FLASH_MIN;
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void
- }
- #endif
- 
-+#ifdef CONFIG_BCM47XX_BCMA
-+static int __init uart8250_init_bcma(void)
-+{
-+	int i;
-+	struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc);
-+
-+	memset(&uart8250_data, 0,  sizeof(uart8250_data));
-+
-+	for (i = 0; i < cc->nr_serial_ports; i++) {
-+		struct plat_serial8250_port *p = &(uart8250_data[i]);
-+		struct bcma_serial_port *bcma_port;
-+		bcma_port = &(cc->serial_ports[i]);
-+
-+		p->mapbase = (unsigned int) bcma_port->regs;
-+		p->membase = (void *) bcma_port->regs;
-+		p->irq = bcma_port->irq + 2;
-+		p->uartclk = bcma_port->baud_base;
-+		p->regshift = bcma_port->reg_shift;
-+		p->iotype = UPIO_MEM;
-+		p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+	}
-+	return platform_device_register(&uart8250_device);
-+}
-+#endif
-+
- static int __init uart8250_init(void)
- {
- 	switch (bcm47xx_bus_type) {
-@@ -54,6 +79,10 @@ static int __init uart8250_init(void)
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return uart8250_init_ssb();
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		return uart8250_init_bcma();
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -29,6 +29,7 @@
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/bcma/bcma_soc.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
- 		break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
-+		break;
-+#endif
- 	}
- 	while (1)
- 		cpu_relax();
-@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void)
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- 		break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
-+		break;
-+#endif
- 	}
- 	while (1)
- 		cpu_relax();
-@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb(
- }
- #endif
- 
-+#ifdef CONFIG_BCM47XX_BCMA
-+static void __init bcm47xx_register_bcma(void)
-+{
-+	int err;
-+
-+	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
-+	if (err)
-+		panic("Failed to initialize BCMA bus (err %d)\n", err);
-+}
-+#endif
-+
- void __init plat_mem_setup(void)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
- 
-+	if (c->cputype == CPU_74K) {
-+		printk(KERN_INFO "bcm47xx: using bcma bus\n");
-+#ifdef CONFIG_BCM47XX_BCMA
-+		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
-+		bcm47xx_register_bcma();
-+#endif
-+	} else {
-+		printk(KERN_INFO "bcm47xx: using ssb bus\n");
- #ifdef CONFIG_BCM47XX_SSB
--	bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
--	bcm47xx_register_ssb();
-+		bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
-+		bcm47xx_register_ssb();
- #endif
-+	}
- 
- 	_machine_restart = bcm47xx_machine_restart;
- 	_machine_halt = bcm47xx_machine_halt;
- 	pm_power_off = bcm47xx_machine_halt;
- }
-+
-+static int __init bcm47xx_register_bus_complete(void)
-+{
-+	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+	case BCM47XX_BUS_TYPE_SSB:
-+		/* Nothing to do */
-+		break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_bus_register(&bcm47xx_bus.bcma.bus);
-+		break;
-+#endif
-+	}
-+	return 0;
-+}
-+device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -45,6 +45,11 @@ void __init plat_time_init(void)
- 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
- 		break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
-+		break;
-+#endif
- 	}
- 
- 	if (!hz)
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -20,17 +20,25 @@
- #define __ASM_BCM47XX_H
- 
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_soc.h>
- 
- enum bcm47xx_bus_type {
- #ifdef CONFIG_BCM47XX_SSB
- 	BCM47XX_BUS_TYPE_SSB,
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	BCM47XX_BUS_TYPE_BCMA,
-+#endif
- };
- 
- union bcm47xx_bus {
- #ifdef CONFIG_BCM47XX_SSB
- 	struct ssb_bus ssb;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	struct bcma_soc bcma;
-+#endif
- };
- 
- extern union bcm47xx_bus bcm47xx_bus;
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -10,6 +10,7 @@
- #define __BCM47XX_GPIO_H
- 
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/bcma/bcma.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
- 
- #define BCM47XX_EXTIF_GPIO_LINES	5
-@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigne
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
-+					   1 << gpio);
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsign
- 	case BCM47XX_BUS_TYPE_SSB:
- 		ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- 			     value ? 1 << gpio : 0);
-+		return;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+				     value ? 1 << gpio : 0);
-+		return;
- #endif
- 	}
- }
-@@ -49,6 +62,12 @@ static inline int gpio_direction_input(u
- 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- 		return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+				       0);
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -65,6 +84,16 @@ static inline int gpio_direction_output(
- 		ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- 		return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		/* first set the gpio out value */
-+		bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+				     value ? 1 << gpio : 0);
-+		/* then set the gpio mode */
-+		bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+				       1 << gpio);
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned
- 				 value ? 1 << gpio : 0);
- 		return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
-+					 1 << gpio, value ? 1 << gpio : 0);
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
-@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned
- 				  value ? 1 << gpio : 0);
- 		return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
-+					  1 << gpio, value ? 1 << gpio : 0);
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start(
- 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
- 		break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
-+					       0xfffffff);
-+		break;
-+#endif
- 	}
- }
- 
-@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(vo
- 	case BCM47XX_BUS_TYPE_SSB:
- 		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
-+		return 0;
-+#endif
- 	}
- 	return -EINVAL;
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
deleted file mode 100644
index 216c56d9e6..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 1c44f60e3fd9336d19f56a67c1efc1129fd728a6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:38 +0200
-Subject: [PATCH 11/26] bcm47xx: fix irq assignment for new SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/irq.c |   12 ++++++++++++
- 1 files changed, 12 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -26,6 +26,7 @@
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <asm/irq_cpu.h>
-+#include <bcm47xx.h>
- 
- void plat_irq_dispatch(void)
- {
-@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
- 
- void __init arch_init_irq(void)
- {
-+#ifdef CONFIG_BCM47XX_BCMA
-+	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
-+		bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
-+			     BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
-+		/*
-+		 * the kernel reads the timer irq from some register and thinks
-+		 * it's #5, but we offset it by 2 and route to #7
-+		 */
-+		cp0_compare_irq = 7;
-+	}
-+#endif
- 	mips_cpu_irq_init();
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch
deleted file mode 100644
index 11855b4496..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From b7d9f9cd6a8e463c1061ea29ed3e614403625024 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:51:47 +0200
-Subject: [PATCH 12/26] bcma: move parallel flash into a union
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c                   |    3 +
- drivers/bcma/driver_mips.c                  |    1 +
- include/linux/bcma/bcma_driver_chipcommon.h |   73 ++++++++++++++++++++++++++-
- 3 files changed, 76 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -50,6 +50,9 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_BCMA
- 	case BCM47XX_BUS_TYPE_BCMA:
- 		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+		if (bcma_cc->flash_type != BCMA_PFLASH)
-+			return;
-+
- 		base = bcma_cc->pflash.window;
- 		lim = bcma_cc->pflash.window_size;
- 		break;
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect(
- 		break;
- 	case BCMA_CC_FLASHT_PARA:
- 		pr_info("found parallel flash.\n");
-+		bus->drv_cc.flash_type = BCMA_PFLASH;
- 		bus->drv_cc.pflash.window = 0x1c000000;
- 		bus->drv_cc.pflash.window_size = 0x02000000;
- 
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -108,10 +108,68 @@
- #define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
- #define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
- #define BCMA_CC_FLASHCTL		0x0040
-+
-+/* Start/busy bit in flashcontrol */
-+#define  BCMA_CC_FLASHCTL_OPCODE	0x000000ff
-+#define  BCMA_CC_FLASHCTL_ACTION	0x00000700
-+#define  BCMA_CC_FLASHCTL_CS_ACTIVE	0x00001000	/* Chip Select Active, rev >= 20 */
- #define  BCMA_CC_FLASHCTL_START		0x80000000
- #define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
-+
-+/* flashcontrol action+opcodes for ST flashes */
-+#define  BCMA_CC_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
-+#define  BCMA_CC_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
-+#define  BCMA_CC_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
-+#define  BCMA_CC_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
-+#define  BCMA_CC_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
-+#define  BCMA_CC_FLASHCTL_ST_PP		0x0302		/* Page Program */
-+#define  BCMA_CC_FLASHCTL_ST_SE		0x02d8		/* Sector Erase */
-+#define  BCMA_CC_FLASHCTL_ST_BE		0x00c7		/* Bulk Erase */
-+#define  BCMA_CC_FLASHCTL_ST_DP		0x00b9		/* Deep Power-down */
-+#define  BCMA_CC_FLASHCTL_ST_RES	0x03ab		/* Read Electronic Signature */
-+#define  BCMA_CC_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
-+#define  BCMA_CC_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
-+
-+
-+/* flashcontrol action+opcodes for Atmel flashes */
-+#define  BCMA_CC_FLASHCTL_AT_READ			0x07e8
-+#define  BCMA_CC_FLASHCTL_AT_PAGE_READ			0x07d2
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_READ
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_READ
-+#define  BCMA_CC_FLASHCTL_AT_STATUS			0x01d7
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE			0x0384
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE			0x0387
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM		0x0283
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM		0x0286
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM		0x0288
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM		0x0289
-+#define  BCMA_CC_FLASHCTL_AT_PAGE_ERASE			0x0281
-+#define  BCMA_CC_FLASHCTL_AT_BLOCK_ERASE		0x0250
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_LOAD			0x0253
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_LOAD			0x0255
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_COMPARE		0x0260
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_COMPARE		0x0261
-+#define  BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM		0x0258
-+#define  BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM		0x0259
-+
- #define BCMA_CC_FLASHADDR		0x0044
- #define BCMA_CC_FLASHDATA		0x0048
-+
-+/* Status register bits for ST flashes */
-+#define  BCMA_CC_FLASHDATA_ST_WIP	0x01		/* Write In Progress */
-+#define  BCMA_CC_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */
-+#define  BCMA_CC_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */
-+#define  BCMA_CC_FLASHDATA_ST_BP_SHIFT	2
-+#define  BCMA_CC_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */
-+
-+/* Status register bits for Atmel flashes */
-+#define  BCMA_CC_FLASHDATA_AT_READY	0x80
-+#define  BCMA_CC_FLASHDATA_AT_MISMATCH	0x40
-+#define  BCMA_CC_FLASHDATA_AT_ID_MASK	0x38
-+#define  BCMA_CC_FLASHDATA_AT_ID_SHIFT	3
-+
- #define BCMA_CC_BCAST_ADDR		0x0050
- #define BCMA_CC_BCAST_DATA		0x0054
- #define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-@@ -300,6 +358,12 @@
- #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
- #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
- 
-+#define	BCMA_FLASH2			0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
-+#define	BCMA_FLASH2_SZ			0x02000000	/* Size of Flash Region 2 */
-+#define	BCMA_FLASH1			0x1fc00000	/* MIPS Flash Region 1 */
-+#define	BCMA_FLASH1_SZ			0x00400000	/* MIPS Size of Flash Region 1 */
-+
-+
- /* Data for the PMU, if available.
-  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
-  */
-@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu {
- };
- 
- #ifdef CONFIG_BCMA_DRIVER_MIPS
-+enum bcma_flash_type {
-+	BCMA_PFLASH,
-+};
-+
- struct bcma_pflash {
- 	u8 buswidth;
- 	u32 window;
-@@ -334,7 +402,10 @@ struct bcma_drv_cc {
- 	u16 fast_pwrup_delay;
- 	struct bcma_chipcommon_pmu pmu;
- #ifdef CONFIG_BCMA_DRIVER_MIPS
--	struct bcma_pflash pflash;
-+	enum bcma_flash_type flash_type;
-+	union {
-+		struct bcma_pflash pflash;
-+	};
- 
- 	int nr_serial_ports;
- 	struct bcma_serial_port serial_ports[4];
diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch
deleted file mode 100644
index e78f3c4576..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch
+++ /dev/null
@@ -1,681 +0,0 @@
-From a62940e988526c881966a8c72cc28c95fca89f3c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:53:07 +0200
-Subject: [PATCH 13/26] bcma: add serial flash support to bcma
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/Kconfig                        |    5 +
- drivers/bcma/Makefile                       |    1 +
- drivers/bcma/bcma_private.h                 |    5 +
- drivers/bcma/driver_chipcommon_sflash.c     |  555 +++++++++++++++++++++++++++
- drivers/bcma/driver_mips.c                  |    8 +-
- include/linux/bcma/bcma_driver_chipcommon.h |   24 ++
- 6 files changed, 597 insertions(+), 1 deletions(-)
- create mode 100644 drivers/bcma/driver_chipcommon_sflash.c
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -38,6 +38,11 @@ config BCMA_HOST_SOC
- 	bool
- 	depends on BCMA_DRIVER_MIPS
- 
-+config BCMA_SFLASH
-+	bool
-+	depends on BCMA_DRIVER_MIPS
-+	default y
-+
- config BCMA_DRIVER_MIPS
- 	bool "BCMA Broadcom MIPS core driver"
- 	depends on BCMA && MIPS
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -1,5 +1,6 @@
- bcma-y					+= main.o scan.o core.o sprom.o
- bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
-+bcma-$(CONFIG_BCMA_SFLASH)		+= driver_chipcommon_sflash.o
- bcma-y					+= driver_pci.o
- bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
- bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma
- u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+/* driver_chipcommon_sflash.c */
-+int bcma_sflash_init(struct bcma_drv_cc *cc);
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- #ifdef CONFIG_BCMA_HOST_PCI
- /* host_pci.c */
- extern int __init bcma_host_pci_init(void);
---- /dev/null
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -0,0 +1,555 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright 2010, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "bcma_private.h"
-+
-+#define NUM_RETRIES	3
-+
-+
-+/* Issue a serial flash command */
-+static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
-+{
-+	bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
-+			BCMA_CC_FLASHCTL_START | opcode);
-+	while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)
-+		;
-+}
-+
-+
-+static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc,
-+					      u32 offset, u8 byte)
-+{
-+	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
-+	bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
-+}
-+
-+/* Initialize serial flash access */
-+int bcma_sflash_init(struct bcma_drv_cc *cc)
-+{
-+	u32 id, id2;
-+
-+	memset(&cc->sflash, 0, sizeof(struct bcma_sflash));
-+
-+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+	case BCMA_CC_FLASHT_STSER:
-+		/* Probe for ST chips */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
-+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
-+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
-+		cc->sflash.blocksize = 64 * 1024;
-+		switch (id) {
-+		case 0x11:
-+			/* ST M25P20 2 Mbit Serial Flash */
-+			cc->sflash.numblocks = 4;
-+			break;
-+		case 0x12:
-+			/* ST M25P40 4 Mbit Serial Flash */
-+			cc->sflash.numblocks = 8;
-+			break;
-+		case 0x13:
-+			/* ST M25P80 8 Mbit Serial Flash */
-+			cc->sflash.numblocks = 16;
-+			break;
-+		case 0x14:
-+			/* ST M25P16 16 Mbit Serial Flash */
-+			cc->sflash.numblocks = 32;
-+			break;
-+		case 0x15:
-+			/* ST M25P32 32 Mbit Serial Flash */
-+			cc->sflash.numblocks = 64;
-+			break;
-+		case 0x16:
-+			/* ST M25P64 64 Mbit Serial Flash */
-+			cc->sflash.numblocks = 128;
-+			break;
-+		case 0x17:
-+			/* ST M25FL128 128 Mbit Serial Flash */
-+			cc->sflash.numblocks = 256;
-+			break;
-+		case 0xbf:
-+			/* All of the following flashes are SST with
-+			 * 4KB subsectors. Others should be added but
-+			 * We'll have to revamp the way we identify them
-+			 * since RES is not eough to disambiguate them.
-+			 */
-+			cc->sflash.blocksize = 4 * 1024;
-+			bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
-+			bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
-+			id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
-+			switch (id2) {
-+			case 1:
-+				/* SST25WF512 512 Kbit Serial Flash */
-+			case 0x48:
-+				/* SST25VF512 512 Kbit Serial Flash */
-+				cc->sflash.numblocks = 16;
-+				break;
-+			case 2:
-+				/* SST25WF010 1 Mbit Serial Flash */
-+			case 0x49:
-+				/* SST25VF010 1 Mbit Serial Flash */
-+				cc->sflash.numblocks = 32;
-+				break;
-+			case 3:
-+				/* SST25WF020 2 Mbit Serial Flash */
-+			case 0x43:
-+				/* SST25VF020 2 Mbit Serial Flash */
-+				cc->sflash.numblocks = 64;
-+				break;
-+			case 4:
-+				/* SST25WF040 4 Mbit Serial Flash */
-+			case 0x44:
-+				/* SST25VF040 4 Mbit Serial Flash */
-+			case 0x8d:
-+				/* SST25VF040B 4 Mbit Serial Flash */
-+				cc->sflash.numblocks = 128;
-+				break;
-+			case 5:
-+				/* SST25WF080 8 Mbit Serial Flash */
-+			case 0x8e:
-+				/* SST25VF080B 8 Mbit Serial Flash */
-+				cc->sflash.numblocks = 256;
-+				break;
-+			case 0x41:
-+				/* SST25VF016 16 Mbit Serial Flash */
-+				cc->sflash.numblocks = 512;
-+				break;
-+			case 0x4a:
-+				/* SST25VF032 32 Mbit Serial Flash */
-+				cc->sflash.numblocks = 1024;
-+				break;
-+			case 0x4b:
-+				/* SST25VF064 64 Mbit Serial Flash */
-+				cc->sflash.numblocks = 2048;
-+				break;
-+			}
-+			break;
-+		}
-+		break;
-+
-+	case BCMA_CC_FLASHT_ATSER:
-+		/* Probe for Atmel chips */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
-+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
-+		switch (id) {
-+		case 0xc:
-+			/* Atmel AT45DB011 1Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 512;
-+			break;
-+		case 0x14:
-+			/* Atmel AT45DB021 2Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 1024;
-+			break;
-+		case 0x1c:
-+			/* Atmel AT45DB041 4Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 2048;
-+			break;
-+		case 0x24:
-+			/* Atmel AT45DB081 8Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x2c:
-+			/* Atmel AT45DB161 16Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x34:
-+			/* Atmel AT45DB321 32Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		case 0x3c:
-+			/* Atmel AT45DB642 64Mbit Serial Flash */
-+			cc->sflash.blocksize = 1024;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		}
-+		break;
-+	}
-+
-+	cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
-+
-+	return cc->sflash.size ? 0 : -ENODEV;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			   u8 *buf)
-+{
-+	u8 *from, *to;
-+	u32 cnt, i;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	if ((len >= 4) && (offset & 3))
-+		cnt = 4 - (offset & 3);
-+	else if ((len >= 4) && ((u32)buf & 3))
-+		cnt = 4 - ((u32)buf & 3);
-+	else
-+		cnt = len;
-+
-+
-+	if (cc->core->id.rev == 12)
-+		from = (u8 *)KSEG1ADDR(BCMA_FLASH2 + offset);
-+	else
-+		from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset);
-+
-+	to = (u8 *)buf;
-+
-+	if (cnt < 4) {
-+		for (i = 0; i < cnt; i++) {
-+			*to = readb(from);
-+			from++;
-+			to++;
-+		}
-+		return cnt;
-+	}
-+
-+	while (cnt >= 4) {
-+		*(u32 *)to = readl(from);
-+		from += 4;
-+		to += 4;
-+		cnt -= 4;
-+	}
-+
-+	return len - cnt;
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset)
-+{
-+	if (offset >= cc->sflash.size)
-+		return -22;
-+
-+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+	case BCMA_CC_FLASHT_STSER:
-+		/* Check for ST Write In Progress bit */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
-+		return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
-+				& BCMA_CC_FLASHDATA_ST_WIP;
-+	case BCMA_CC_FLASHT_ATSER:
-+		/* Check for Atmel Ready bit */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
-+		return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
-+				& BCMA_CC_FLASHDATA_AT_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct bcma_bus *bus = cc->core->bus;
-+	int ret = 0;
-+	bool is4712b0 = (bus->chipinfo.id == 0x4712) && (bus->chipinfo.rev == 3);
-+	u32 mask;
-+
-+
-+	/* Enable writes */
-+	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
-+	if (is4712b0) {
-+		mask = 1 << 14;
-+		bcma_sflash_write_u8(cc, offset, *buf++);
-+		/* Set chip select */
-+		bcma_cc_set32(cc, BCMA_CC_GPIOOUT, mask);
-+		/* Issue a page program with the first byte */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, drop cs and return */
-+				bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
-+				udelay(1);
-+				if (!bcma_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				bcma_sflash_cmd(cc, *buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs */
-+		bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
-+		udelay(1);
-+		if (!bcma_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else if (cc->core->id.rev >= 20) {
-+		bcma_sflash_write_u8(cc, offset, *buf++);
-+		/* Issue a page program with CSA bit set */
-+		bcma_sflash_cmd(cc,
-+				BCMA_CC_FLASHCTL_ST_CSA |
-+				BCMA_CC_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, poll droping cs and return */
-+				bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
-+				udelay(1);
-+				if (!bcma_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				bcma_sflash_cmd(cc,
-+						BCMA_CC_FLASHCTL_ST_CSA |
-+						*buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs & poll */
-+		bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
-+		udelay(1);
-+		if (!bcma_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else {
-+		ret = 1;
-+		bcma_sflash_write_u8(cc, offset, *buf);
-+		/* Page program */
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
-+	}
-+	return ret;
-+}
-+
-+static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct bcma_sflash *sfl = &cc->sflash;
-+	u32 page, byte, mask;
-+	int ret = 0;
-+	mask = sfl->blocksize - 1;
-+	page = (offset & ~mask) << 1;
-+	byte = offset & mask;
-+	/* Read main memory page into buffer 1 */
-+	if (byte || (len < sfl->blocksize)) {
-+		int i = 100;
-+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
-+		/* 250 us for AT45DB321B */
-+		while (i > 0 && bcma_sflash_poll(cc, offset)) {
-+			udelay(10);
-+			i--;
-+		}
-+		BUG_ON(!bcma_sflash_poll(cc, offset));
-+	}
-+	/* Write into buffer 1 */
-+	for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+		bcma_sflash_write_u8(cc, byte++, *buf++);
-+		bcma_sflash_cmd(cc,
-+				BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
-+	}
-+	/* Write buffer 1 into main memory page */
-+	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
-+	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
-+
-+	return ret;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			    const u8 *buf)
-+{
-+	struct bcma_sflash *sfl;
-+	int ret = 0, tries = NUM_RETRIES;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+	case BCMA_CC_FLASHT_STSER:
-+		do {
-+			ret = sflash_st_write(cc, offset, len, buf);
-+			tries--;
-+		} while (ret == -EAGAIN && tries > 0);
-+
-+		if (ret == -EAGAIN && tries == 0) {
-+			pr_info("ST Flash rejected write\n");
-+			ret = -EIO;
-+		}
-+		break;
-+	case BCMA_CC_FLASHT_ATSER:
-+		ret = sflash_at_write(cc, offset, len, buf);
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset)
-+{
-+	struct bcma_sflash *sfl;
-+
-+	if (offset >= cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+	case BCMA_CC_FLASHT_STSER:
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
-+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
-+		/* Newer flashes have "sub-sectors" which can be erased independently
-+		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
-+		 * before.
-+		 */
-+		bcma_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? BCMA_CC_FLASHCTL_ST_SSE : BCMA_CC_FLASHCTL_ST_SE);
-+		return sfl->blocksize;
-+	case BCMA_CC_FLASHT_ATSER:
-+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
-+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
-+		return sfl->blocksize;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			     const u8 *buf)
-+{
-+	struct bcma_sflash *sfl;
-+	u8 *block = NULL, *cur_ptr, *blk_ptr;
-+	u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+	u32 blk_offset, blk_len, copied;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (len <= 0)
-+		return 0;
-+
-+	sfl = &cc->sflash;
-+	if ((offset + len) > sfl->size)
-+		return -EINVAL;
-+
-+	blocksize = sfl->blocksize;
-+	mask = blocksize - 1;
-+
-+	/* Allocate a block of mem */
-+	block = kmalloc(blocksize, GFP_KERNEL);
-+	if (!block)
-+		return -ENOMEM;
-+
-+	while (len) {
-+		/* Align offset */
-+		cur_offset = offset & ~mask;
-+		cur_length = blocksize;
-+		cur_ptr = block;
-+
-+		remainder = blocksize - (offset & mask);
-+		if (len < remainder)
-+			cur_retlen = len;
-+		else
-+			cur_retlen = remainder;
-+
-+		/* buf == NULL means erase only */
-+		if (buf) {
-+			/* Copy existing data into holding block if necessary */
-+			if ((offset & mask) || (len < blocksize)) {
-+				blk_offset = cur_offset;
-+				blk_len = cur_length;
-+				blk_ptr = cur_ptr;
-+
-+				/* Copy entire block */
-+				while (blk_len) {
-+					copied = bcma_sflash_read(cc,
-+							blk_offset,
-+							blk_len, blk_ptr);
-+					blk_offset += copied;
-+					blk_len -= copied;
-+					blk_ptr += copied;
-+				}
-+			}
-+
-+			/* Copy input data into holding block */
-+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+		}
-+
-+		/* Erase block */
-+		ret = bcma_sflash_erase(cc, cur_offset);
-+		if (ret < 0)
-+			goto done;
-+
-+		while (bcma_sflash_poll(cc, cur_offset));
-+
-+		/* buf == NULL means erase only */
-+		if (!buf) {
-+			offset += cur_retlen;
-+			len -= cur_retlen;
-+			continue;
-+		}
-+
-+		/* Write holding block */
-+		while (cur_length > 0) {
-+			bytes = bcma_sflash_write(cc, cur_offset,
-+					cur_length, cur_ptr);
-+
-+			if (bytes < 0) {
-+				ret = bytes;
-+				goto done;
-+			}
-+
-+			while (bcma_sflash_poll(cc, cur_offset))
-+				;
-+
-+			cur_offset += bytes;
-+			cur_length -= bytes;
-+			cur_ptr += bytes;
-+		}
-+
-+		offset += cur_retlen;
-+		len -= cur_retlen;
-+		buf += cur_retlen;
-+	}
-+
-+	ret = len;
-+done:
-+	kfree(block);
-+	return ret;
-+}
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect(
- 	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
- 	case BCMA_CC_FLASHT_STSER:
- 	case BCMA_CC_FLASHT_ATSER:
--		pr_err("Serial flash not supported.\n");
-+#ifdef CONFIG_BCMA_SFLASH
-+		pr_info("found serial flash.\n");
-+		bus->drv_cc.flash_type = BCMA_SFLASH;
-+		bcma_sflash_init(&bus->drv_cc);
-+#else
-+		pr_info("serial flash not supported.\n");
-+#endif /* CONFIG_BCMA_SFLASH */
- 		break;
- 	case BCMA_CC_FLASHT_PARA:
- 		pr_info("found parallel flash.\n");
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu {
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- enum bcma_flash_type {
- 	BCMA_PFLASH,
-+	BCMA_SFLASH,
- };
- 
- struct bcma_pflash {
-@@ -383,6 +384,14 @@ struct bcma_pflash {
- 	u32 window_size;
- };
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+struct bcma_sflash {
-+	u32 blocksize;		/* Block size */
-+	u32 numblocks;		/* Number of blocks */
-+	u32 size;		/* Total size in bytes */
-+};
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- struct bcma_serial_port {
- 	void *regs;
- 	unsigned long clockspeed;
-@@ -405,6 +414,9 @@ struct bcma_drv_cc {
- 	enum bcma_flash_type flash_type;
- 	union {
- 		struct bcma_pflash pflash;
-+#ifdef CONFIG_BCMA_SFLASH
-+		struct bcma_sflash sflash;
-+#endif /* CONFIG_BCMA_SFLASH */
- 	};
- 
- 	int nr_serial_ports;
-@@ -459,4 +471,16 @@ extern void bcma_chipco_chipctl_maskset(
- extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
- 				       u32 offset, u32 mask, u32 set);
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+/* Chipcommon sflash support. */
-+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			   u8 *buf);
-+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset);
-+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			    const u8 *buf);
-+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset);
-+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+			     const u8 *buf);
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch b/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch
deleted file mode 100644
index 91d8acb267..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From e8afde87ecf56beff67c7d5371cabaa4fc018541 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 23 Jul 2011 23:57:06 +0200
-Subject: [PATCH 14/26] ssb: move flash to chipcommon
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c                 |    8 +++---
- arch/mips/bcm47xx/wgt634u.c               |    8 +++---
- drivers/ssb/driver_mipscore.c             |   36 +++++++++++++++++++++-------
- include/linux/ssb/ssb_driver_chipcommon.h |   18 ++++++++++++++
- include/linux/ssb/ssb_driver_mips.h       |    4 ---
- 5 files changed, 53 insertions(+), 21 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -27,7 +27,7 @@ static char nvram_buf[NVRAM_SPACE];
- static void early_nvram_init(void)
- {
- #ifdef CONFIG_BCM47XX_SSB
--	struct ssb_mipscore *mcore_ssb;
-+	struct ssb_chipcommon *ssb_cc;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
- 	struct bcma_drv_cc *bcma_cc;
-@@ -42,9 +42,9 @@ static void early_nvram_init(void)
- 	switch (bcm47xx_bus_type) {
- #ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
--		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
--		base = mcore_ssb->flash_window;
--		lim = mcore_ssb->flash_window_size;
-+		ssb_cc = &bcm47xx_bus.ssb.chipco;
-+		base = ssb_cc->pflash.window;
-+		lim = ssb_cc->pflash.window_size;
- 		break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
- 					    SSB_CHIPCO_IRQ_GPIO);
- 		}
- 
--		wgt634u_flash_data.width = mcore->flash_buswidth;
--		wgt634u_flash_resource.start = mcore->flash_window;
--		wgt634u_flash_resource.end = mcore->flash_window
--					   + mcore->flash_window_size
-+		wgt634u_flash_data.width = mcore->pflash.buswidth;
-+		wgt634u_flash_resource.start = mcore->pflash.window;
-+		wgt634u_flash_resource.end = mcore->pflash.window
-+					   + mcore->pflash.window_size
- 					   - 1;
- 		return platform_add_devices(wgt634u_devices,
- 					    ARRAY_SIZE(wgt634u_devices));
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -190,16 +190,34 @@ static void ssb_mips_flash_detect(struct
- {
- 	struct ssb_bus *bus = mcore->dev->bus;
- 
--	mcore->flash_buswidth = 2;
--	if (bus->chipco.dev) {
--		mcore->flash_window = 0x1c000000;
--		mcore->flash_window_size = 0x02000000;
-+	/* When there is no chipcommon on the bus there is 4MB flash */
-+	if (!bus->chipco.dev) {
-+		pr_info("found parallel flash.\n");
-+		bus->chipco.flash_type = SSB_PFLASH;
-+		bus->chipco.pflash.window = SSB_FLASH1;
-+		bus->chipco.pflash.window_size = SSB_FLASH1_SZ;
-+		bus->chipco.pflash.buswidth = 2;
-+		return;
-+	}
-+
-+	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		pr_info("serial flash not supported.\n");
-+		break;
-+	case SSB_CHIPCO_FLASHT_PARA:
-+		pr_info("found parallel flash.\n");
-+		bus->chipco.flash_type = SSB_PFLASH;
-+		bus->chipco.pflash.window = SSB_FLASH2;
-+		bus->chipco.pflash.window_size = SSB_FLASH2_SZ;
- 		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
--		               & SSB_CHIPCO_CFG_DS16) == 0)
--			mcore->flash_buswidth = 1;
--	} else {
--		mcore->flash_window = 0x1fc00000;
--		mcore->flash_window_size = 0x00400000;
-+		     & SSB_CHIPCO_CFG_DS16) == 0)
-+			bus->chipco.pflash.buswidth = 1;
-+		else
-+			bus->chipco.pflash.buswidth = 2;
-+		break;
-+	default:
-+		pr_err("flash not supported.\n");
- 	}
- }
- 
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -582,6 +582,18 @@ struct ssb_chipcommon_pmu {
- 	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
- };
- 
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+enum ssb_flash_type {
-+	SSB_PFLASH,
-+};
-+
-+struct ssb_pflash {
-+	u8 buswidth;
-+	u32 window;
-+	u32 window_size;
-+};
-+#endif /* CONFIG_SSB_DRIVER_MIPS */
-+
- struct ssb_chipcommon {
- 	struct ssb_device *dev;
- 	u32 capabilities;
-@@ -589,6 +601,12 @@ struct ssb_chipcommon {
- 	/* Fast Powerup Delay constant */
- 	u16 fast_pwrup_delay;
- 	struct ssb_chipcommon_pmu pmu;
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+	enum ssb_flash_type flash_type;
-+	union {
-+		struct ssb_pflash pflash;
-+	};
-+#endif /* CONFIG_SSB_DRIVER_MIPS */
- };
- 
- static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
---- a/include/linux/ssb/ssb_driver_mips.h
-+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -19,10 +19,6 @@ struct ssb_mipscore {
- 
- 	int nr_serial_ports;
- 	struct ssb_serial_port serial_ports[4];
--
--	u8 flash_buswidth;
--	u32 flash_window;
--	u32 flash_window_size;
- };
- 
- extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
diff --git a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
deleted file mode 100644
index e91c2a44f4..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
+++ /dev/null
@@ -1,697 +0,0 @@
-From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 Jul 2011 20:20:36 +0200
-Subject: [PATCH 15/26] ssb: add serial flash support
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/ssb/Kconfig                       |    6 +
- drivers/ssb/Makefile                      |    1 +
- drivers/ssb/driver_chipcommon_sflash.c    |  556 +++++++++++++++++++++++++++++
- drivers/ssb/driver_mipscore.c             |    6 +
- drivers/ssb/ssb_private.h                 |    4 +
- include/linux/ssb/ssb_driver_chipcommon.h |   30 ++-
- 6 files changed, 601 insertions(+), 2 deletions(-)
- create mode 100644 drivers/ssb/driver_chipcommon_sflash.c
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
- 
- 	  If unsure, say N
- 
-+config SSB_SFLASH
-+	bool
-+	depends on SSB_DRIVER_MIPS
-+	default y
-+
-+
- # Assumption: We are on embedded, if we compile the MIPS core.
- config SSB_EMBEDDED
- 	bool
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
- # built-in drivers
- ssb-y					+= driver_chipcommon.o
- ssb-y					+= driver_chipcommon_pmu.o
-+ssb-$(CONFIG_SSB_SFLASH)		+= driver_chipcommon_sflash.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,556 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright 2010, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+#define NUM_RETRIES	3
-+
-+
-+/* Issue a serial flash command */
-+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
-+			SSB_CHIPCO_FLASHCTL_START | opcode);
-+	while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
-+			& SSB_CHIPCO_FLASHCTL_BUSY)
-+		;
-+}
-+
-+
-+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
-+					      u32 offset, u8 byte)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+	chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
-+}
-+
-+/* Initialize serial flash access */
-+int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+	u32 id, id2;
-+
-+	memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
-+
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		/* Probe for ST chips */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+		cc->sflash.blocksize = 64 * 1024;
-+		switch (id) {
-+		case 0x11:
-+			/* ST M25P20 2 Mbit Serial Flash */
-+			cc->sflash.numblocks = 4;
-+			break;
-+		case 0x12:
-+			/* ST M25P40 4 Mbit Serial Flash */
-+			cc->sflash.numblocks = 8;
-+			break;
-+		case 0x13:
-+			/* ST M25P80 8 Mbit Serial Flash */
-+			cc->sflash.numblocks = 16;
-+			break;
-+		case 0x14:
-+			/* ST M25P16 16 Mbit Serial Flash */
-+			cc->sflash.numblocks = 32;
-+			break;
-+		case 0x15:
-+			/* ST M25P32 32 Mbit Serial Flash */
-+			cc->sflash.numblocks = 64;
-+			break;
-+		case 0x16:
-+			/* ST M25P64 64 Mbit Serial Flash */
-+			cc->sflash.numblocks = 128;
-+			break;
-+		case 0x17:
-+			/* ST M25FL128 128 Mbit Serial Flash */
-+			cc->sflash.numblocks = 256;
-+			break;
-+		case 0xbf:
-+			/* All of the following flashes are SST with
-+			 * 4KB subsectors. Others should be added but
-+			 * We'll have to revamp the way we identify them
-+			 * since RES is not eough to disambiguate them.
-+			 */
-+			cc->sflash.blocksize = 4 * 1024;
-+			chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
-+			ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+			id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+			switch (id2) {
-+			case 1:
-+				/* SST25WF512 512 Kbit Serial Flash */
-+			case 0x48:
-+				/* SST25VF512 512 Kbit Serial Flash */
-+				cc->sflash.numblocks = 16;
-+				break;
-+			case 2:
-+				/* SST25WF010 1 Mbit Serial Flash */
-+			case 0x49:
-+				/* SST25VF010 1 Mbit Serial Flash */
-+				cc->sflash.numblocks = 32;
-+				break;
-+			case 3:
-+				/* SST25WF020 2 Mbit Serial Flash */
-+			case 0x43:
-+				/* SST25VF020 2 Mbit Serial Flash */
-+				cc->sflash.numblocks = 64;
-+				break;
-+			case 4:
-+				/* SST25WF040 4 Mbit Serial Flash */
-+			case 0x44:
-+				/* SST25VF040 4 Mbit Serial Flash */
-+			case 0x8d:
-+				/* SST25VF040B 4 Mbit Serial Flash */
-+				cc->sflash.numblocks = 128;
-+				break;
-+			case 5:
-+				/* SST25WF080 8 Mbit Serial Flash */
-+			case 0x8e:
-+				/* SST25VF080B 8 Mbit Serial Flash */
-+				cc->sflash.numblocks = 256;
-+				break;
-+			case 0x41:
-+				/* SST25VF016 16 Mbit Serial Flash */
-+				cc->sflash.numblocks = 512;
-+				break;
-+			case 0x4a:
-+				/* SST25VF032 32 Mbit Serial Flash */
-+				cc->sflash.numblocks = 1024;
-+				break;
-+			case 0x4b:
-+				/* SST25VF064 64 Mbit Serial Flash */
-+				cc->sflash.numblocks = 2048;
-+				break;
-+			}
-+			break;
-+		}
-+		break;
-+
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		/* Probe for Atmel chips */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
-+		switch (id) {
-+		case 0xc:
-+			/* Atmel AT45DB011 1Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 512;
-+			break;
-+		case 0x14:
-+			/* Atmel AT45DB021 2Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 1024;
-+			break;
-+		case 0x1c:
-+			/* Atmel AT45DB041 4Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 2048;
-+			break;
-+		case 0x24:
-+			/* Atmel AT45DB081 8Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x2c:
-+			/* Atmel AT45DB161 16Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x34:
-+			/* Atmel AT45DB321 32Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		case 0x3c:
-+			/* Atmel AT45DB642 64Mbit Serial Flash */
-+			cc->sflash.blocksize = 1024;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		}
-+		break;
-+	}
-+
-+	cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
-+
-+	return cc->sflash.size ? 0 : -ENODEV;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   u8 *buf)
-+{
-+	u8 *from, *to;
-+	u32 cnt, i;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	if ((len >= 4) && (offset & 3))
-+		cnt = 4 - (offset & 3);
-+	else if ((len >= 4) && ((u32)buf & 3))
-+		cnt = 4 - ((u32)buf & 3);
-+	else
-+		cnt = len;
-+
-+
-+	if (cc->dev->id.revision == 12)
-+		from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
-+	else
-+		from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
-+
-+	to = (u8 *)buf;
-+
-+	if (cnt < 4) {
-+		for (i = 0; i < cnt; i++) {
-+			*to = readb(from);
-+			from++;
-+			to++;
-+		}
-+		return cnt;
-+	}
-+
-+	while (cnt >= 4) {
-+		*(u32 *)to = readl(from);
-+		from += 4;
-+		to += 4;
-+		cnt -= 4;
-+	}
-+
-+	return len - cnt;
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
-+{
-+	if (offset >= cc->sflash.size)
-+		return -22;
-+
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		/* Check for ST Write In Progress bit */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
-+		return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+				& SSB_CHIPCO_FLASHSTA_ST_WIP;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		/* Check for Atmel Ready bit */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+		return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+				& SSB_CHIPCO_FLASHSTA_AT_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	int ret = 0;
-+	bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
-+	u32 mask;
-+
-+
-+	/* Enable writes */
-+	ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+	if (is4712b0) {
-+		mask = 1 << 14;
-+		ssb_sflash_write_u8(cc, offset, *buf++);
-+		/* Set chip select */
-+		chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
-+		/* Issue a page program with the first byte */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, drop cs and return */
-+				chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+				udelay(1);
-+				if (!ssb_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				ssb_sflash_cmd(cc, *buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs */
-+		chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+		udelay(1);
-+		if (!ssb_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else if (cc->dev->id.revision >= 20) {
-+		ssb_sflash_write_u8(cc, offset, *buf++);
-+		/* Issue a page program with CSA bit set */
-+		ssb_sflash_cmd(cc,
-+				SSB_CHIPCO_FLASHCTL_ST_CSA |
-+				SSB_CHIPCO_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, poll droping cs and return */
-+				chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+				udelay(1);
-+				if (!ssb_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				ssb_sflash_cmd(cc,
-+						SSB_CHIPCO_FLASHCTL_ST_CSA |
-+						*buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs & poll */
-+		chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+		udelay(1);
-+		if (!ssb_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else {
-+		ret = 1;
-+		ssb_sflash_write_u8(cc, offset, *buf);
-+		/* Page program */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+	}
-+	return ret;
-+}
-+
-+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct ssb_sflash *sfl = &cc->sflash;
-+	u32 page, byte, mask;
-+	int ret = 0;
-+	mask = sfl->blocksize - 1;
-+	page = (offset & ~mask) << 1;
-+	byte = offset & mask;
-+	/* Read main memory page into buffer 1 */
-+	if (byte || (len < sfl->blocksize)) {
-+		int i = 100;
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
-+		/* 250 us for AT45DB321B */
-+		while (i > 0 && ssb_sflash_poll(cc, offset)) {
-+			udelay(10);
-+			i--;
-+		}
-+		BUG_ON(!ssb_sflash_poll(cc, offset));
-+	}
-+	/* Write into buffer 1 */
-+	for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+		ssb_sflash_write_u8(cc, byte++, *buf++);
-+		ssb_sflash_cmd(cc,
-+				SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
-+	}
-+	/* Write buffer 1 into main memory page */
-+	chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+	ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
-+
-+	return ret;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			    const u8 *buf)
-+{
-+	struct ssb_sflash *sfl;
-+	int ret = 0, tries = NUM_RETRIES;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		do {
-+			ret = sflash_st_write(cc, offset, len, buf);
-+			tries--;
-+		} while (ret == -EAGAIN && tries > 0);
-+
-+		if (ret == -EAGAIN && tries == 0) {
-+			pr_info("ST Flash rejected write\n");
-+			ret = -EIO;
-+		}
-+		break;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		ret = sflash_at_write(cc, offset, len, buf);
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
-+{
-+	struct ssb_sflash *sfl;
-+
-+	if (offset >= cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+		/* Newer flashes have "sub-sectors" which can be erased independently
-+		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
-+		 * before.
-+		 */
-+		ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE);
-+		return sfl->blocksize;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
-+		return sfl->blocksize;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			     const u8 *buf)
-+{
-+	struct ssb_sflash *sfl;
-+	u8 *block = NULL, *cur_ptr, *blk_ptr;
-+	u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+	u32 blk_offset, blk_len, copied;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (len <= 0)
-+		return 0;
-+
-+	sfl = &cc->sflash;
-+	if ((offset + len) > sfl->size)
-+		return -EINVAL;
-+
-+	blocksize = sfl->blocksize;
-+	mask = blocksize - 1;
-+
-+	/* Allocate a block of mem */
-+	block = kmalloc(blocksize, GFP_KERNEL);
-+	if (!block)
-+		return -ENOMEM;
-+
-+	while (len) {
-+		/* Align offset */
-+		cur_offset = offset & ~mask;
-+		cur_length = blocksize;
-+		cur_ptr = block;
-+
-+		remainder = blocksize - (offset & mask);
-+		if (len < remainder)
-+			cur_retlen = len;
-+		else
-+			cur_retlen = remainder;
-+
-+		/* buf == NULL means erase only */
-+		if (buf) {
-+			/* Copy existing data into holding block if necessary */
-+			if ((offset & mask) || (len < blocksize)) {
-+				blk_offset = cur_offset;
-+				blk_len = cur_length;
-+				blk_ptr = cur_ptr;
-+
-+				/* Copy entire block */
-+				while (blk_len) {
-+					copied = ssb_sflash_read(cc,
-+							blk_offset,
-+							blk_len, blk_ptr);
-+					blk_offset += copied;
-+					blk_len -= copied;
-+					blk_ptr += copied;
-+				}
-+			}
-+
-+			/* Copy input data into holding block */
-+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+		}
-+
-+		/* Erase block */
-+		ret = ssb_sflash_erase(cc, cur_offset);
-+		if (ret < 0)
-+			goto done;
-+
-+		while (ssb_sflash_poll(cc, cur_offset));
-+
-+		/* buf == NULL means erase only */
-+		if (!buf) {
-+			offset += cur_retlen;
-+			len -= cur_retlen;
-+			continue;
-+		}
-+
-+		/* Write holding block */
-+		while (cur_length > 0) {
-+			bytes = ssb_sflash_write(cc, cur_offset,
-+					cur_length, cur_ptr);
-+
-+			if (bytes < 0) {
-+				ret = bytes;
-+				goto done;
-+			}
-+
-+			while (ssb_sflash_poll(cc, cur_offset))
-+				;
-+
-+			cur_offset += bytes;
-+			cur_length -= bytes;
-+			cur_ptr += bytes;
-+		}
-+
-+		offset += cur_retlen;
-+		len -= cur_retlen;
-+		buf += cur_retlen;
-+	}
-+
-+	ret = len;
-+done:
-+	kfree(block);
-+	return ret;
-+}
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
- 	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
- 	case SSB_CHIPCO_FLASHT_STSER:
- 	case SSB_CHIPCO_FLASHT_ATSER:
-+#ifdef CONFIG_SSB_SFLASH
-+		pr_info("found serial flash.\n");
-+		bus->chipco.flash_type = SSB_SFLASH;
-+		ssb_sflash_init(&bus->chipco);
-+#else
- 		pr_info("serial flash not supported.\n");
-+#endif /* CONFIG_SSB_SFLASH */
- 		break;
- 	case SSB_CHIPCO_FLASHT_PARA:
- 		pr_info("found parallel flash.\n");
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
- extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
- 
- 
-+#ifdef CONFIG_SSB_SFLASH
-+/* driver_chipcommon_sflash.c */
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#endif /* CONFIG_SSB_SFLASH */
- 
- /* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_B43_PCI_BRIDGE
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -503,8 +503,10 @@
- #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
- #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
- #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
--#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
--#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00D9		/* Deep Power-down */
-+#define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
-+#define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
- 
- /* Status register bits for ST flashes */
- #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
- #ifdef CONFIG_SSB_DRIVER_MIPS
- enum ssb_flash_type {
- 	SSB_PFLASH,
-+	SSB_SFLASH,
- };
- 
- struct ssb_pflash {
-@@ -592,6 +595,14 @@ struct ssb_pflash {
- 	u32 window;
- 	u32 window_size;
- };
-+
-+#ifdef CONFIG_SSB_SFLASH
-+struct ssb_sflash {
-+	u32 blocksize;		/* Block size */
-+	u32 numblocks;		/* Number of blocks */
-+	u32 size;		/* Total size in bytes */
-+};
-+#endif /* CONFIG_SSB_SFLASH */
- #endif /* CONFIG_SSB_DRIVER_MIPS */
- 
- struct ssb_chipcommon {
-@@ -605,6 +616,9 @@ struct ssb_chipcommon {
- 	enum ssb_flash_type flash_type;
- 	union {
- 		struct ssb_pflash pflash;
-+#ifdef CONFIG_SSB_SFLASH
-+		struct ssb_sflash sflash;
-+#endif /* CONFIG_SSB_SFLASH */
- 	};
- #endif /* CONFIG_SSB_DRIVER_MIPS */
- };
-@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct
- 				  struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
- 
-+#ifdef CONFIG_SSB_SFLASH
-+/* Chipcommon sflash support. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   u8 *buf);
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			    const u8 *buf);
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			     const u8 *buf);
-+#endif /* CONFIG_SSB_SFLASH */
-+
- /* PMU support */
- extern void ssb_pmu_init(struct ssb_chipcommon *cc);
- 
diff --git a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch b/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch
deleted file mode 100644
index 841c44dc2a..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From 4f314ac9edbc80897f158fdb4e1b1de8a2d0d432 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 Jul 2011 21:10:49 +0200
-Subject: [PATCH 16/26] brcm47xx: add common interface for sflash
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/Makefile               |    2 +-
- arch/mips/bcm47xx/bus.c                  |   94 ++++++++++++++++++++++++++++++
- arch/mips/bcm47xx/setup.c                |    8 +++
- arch/mips/include/asm/mach-bcm47xx/bus.h |   37 ++++++++++++
- 4 files changed, 140 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm47xx/bus.c
- create mode 100644 arch/mips/include/asm/mach-bcm47xx/bus.h
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,5 +3,5 @@
- # under Linux.
- #
- 
--obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
- obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/bus.c
-@@ -0,0 +1,94 @@
-+/*
-+ * BCM947xx nvram variable access
-+ *
-+ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <bus.h>
-+
-+static int bcm47xx_sflash_bcma_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
-+{
-+	return bcma_sflash_read(dev->bcc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_bcma_poll(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+	return bcma_sflash_poll(dev->bcc, offset);
-+}
-+
-+static int bcm47xx_sflash_bcma_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+	return bcma_sflash_write(dev->bcc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_bcma_erase(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+	return bcma_sflash_erase(dev->bcc, offset);
-+}
-+
-+static int bcm47xx_sflash_bcma_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+	return bcma_sflash_commit(dev->bcc, offset, len, buf);
-+}
-+
-+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc)
-+{
-+	sflash->sflash_type = BCM47XX_BUS_TYPE_BCMA;
-+	sflash->bcc = bcc;
-+
-+	sflash->read = bcm47xx_sflash_bcma_read;
-+	sflash->poll = bcm47xx_sflash_bcma_poll;
-+	sflash->write = bcm47xx_sflash_bcma_write;
-+	sflash->erase = bcm47xx_sflash_bcma_erase;
-+	sflash->commit = bcm47xx_sflash_bcma_commit;
-+
-+	sflash->blocksize = bcc->sflash.blocksize;
-+	sflash->numblocks = bcc->sflash.numblocks;
-+	sflash->size = bcc->sflash.size;
-+}
-+
-+static int bcm47xx_sflash_ssb_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
-+{
-+	return ssb_sflash_read(dev->scc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_ssb_poll(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+	return ssb_sflash_poll(dev->scc, offset);
-+}
-+
-+static int bcm47xx_sflash_ssb_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+	return ssb_sflash_write(dev->scc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_ssb_erase(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+	return ssb_sflash_erase(dev->scc, offset);
-+}
-+
-+static int bcm47xx_sflash_ssb_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+	return ssb_sflash_commit(dev->scc, offset, len, buf);
-+}
-+
-+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc)
-+{
-+	sflash->sflash_type = BCM47XX_BUS_TYPE_SSB;
-+	sflash->scc = scc;
-+
-+	sflash->read = bcm47xx_sflash_ssb_read;
-+	sflash->poll = bcm47xx_sflash_ssb_poll;
-+	sflash->write = bcm47xx_sflash_ssb_write;
-+	sflash->erase = bcm47xx_sflash_ssb_erase;
-+	sflash->commit = bcm47xx_sflash_ssb_commit;
-+
-+	sflash->blocksize = scc->sflash.blocksize;
-+	sflash->numblocks = scc->sflash.numblocks;
-+	sflash->size = scc->sflash.size;
-+}
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -42,6 +42,8 @@ EXPORT_SYMBOL(bcm47xx_bus);
- enum bcm47xx_bus_type bcm47xx_bus_type;
- EXPORT_SYMBOL(bcm47xx_bus_type);
- 
-+struct bcm47xx_sflash bcm47xx_sflash;
-+
- static void bcm47xx_machine_restart(char *command)
- {
- 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
-@@ -290,6 +292,9 @@ static void __init bcm47xx_register_ssb(
- 	if (err)
- 		panic("Failed to initialize SSB bus (err %d)\n", err);
- 
-+	if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH)
-+		bcm47xx_sflash_struct_ssb_init(&bcm47xx_sflash, &bcm47xx_bus.ssb.chipco);
-+
- 	mcore = &bcm47xx_bus.ssb.mipscore;
- 	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
- 		if (strstr(buf, "console=ttyS1")) {
-@@ -314,6 +319,9 @@ static void __init bcm47xx_register_bcma
- 	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
- 	if (err)
- 		panic("Failed to initialize BCMA bus (err %d)\n", err);
-+
-+	if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH)
-+		bcm47xx_sflash_struct_bcma_init(&bcm47xx_sflash, &bcm47xx_bus.bcma.bus.drv_cc);
- }
- #endif
- 
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
-@@ -0,0 +1,37 @@
-+/*
-+ * BCM947xx nvram variable access
-+ *
-+ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
-+#include <bcm47xx.h>
-+
-+struct bcm47xx_sflash {
-+	enum bcm47xx_bus_type sflash_type;
-+	union {
-+		struct ssb_chipcommon *scc;
-+		struct bcma_drv_cc *bcc;
-+	};
-+
-+	int (*read)(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf);
-+	int (*poll)(struct bcm47xx_sflash *dev, u32 offset);
-+	int (*write)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
-+	int (*erase)(struct bcm47xx_sflash *dev, u32 offset);
-+	int (*commit)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
-+
-+	u32 blocksize;		/* Block size */
-+	u32 numblocks;		/* Number of blocks */
-+	u32 size;		/* Total size in bytes */
-+};
-+
-+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
-+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc);
-+
-+extern struct bcm47xx_sflash bcm47xx_sflash;
diff --git a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch b/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
deleted file mode 100644
index 284b83aa52..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
+++ /dev/null
@@ -1,579 +0,0 @@
-From 1934b89b42976a083c2ad8d8fdc526ab5b05c5e4 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:54:11 +0200
-Subject: [PATCH 17/26] mtd: bcm47xx: add bcm47xx part parser
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/Kconfig       |    7 +
- drivers/mtd/Makefile      |    1 +
- drivers/mtd/bcm47xxpart.c |  536 +++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 544 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/bcm47xxpart.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -173,6 +173,13 @@ config MTD_MYLOADER_PARTS
- 	  You will still need the parsing functions to be called by the driver
- 	  for your particular device. It won't happen automatically.
- 
-+config MTD_BCM47XX_PARTS
-+	tristate "BCM47XX partitioning support"
-+	default y
-+	depends on BCM47XX
-+	---help---
-+	  bcm47XX partitioning support
-+
- comment "User Modules And Translation Layers"
- 
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
---- /dev/null
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -0,0 +1,536 @@
-+/*
-+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  original functions for finding root filesystem from Mike Baker
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *  Copyright 2001-2003, Broadcom Corporation
-+ *  All Rights Reserved.
-+ *
-+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ *  Flash mapping for BCM947XX boards
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_part: " fmt
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/crc32.h>
-+#include <linux/io.h>
-+#include <asm/mach-bcm47xx/nvram.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <asm/fw/cfe/cfe_api.h>
-+
-+
-+#define TRX_MAGIC	0x30524448	/* "HDR0" */
-+#define TRX_VERSION	1
-+#define TRX_MAX_LEN	0x3A0000
-+#define TRX_NO_HEADER	1		/* Do not write TRX header */
-+#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
-+#define TRX_MAX_OFFSET	3
-+
-+struct trx_header {
-+	u32 magic;		/* "HDR0" */
-+	u32 len;		/* Length of file including header */
-+	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
-+	u32 flag_version;	/* 0:15 flags, 16:31 version */
-+	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
-+};
-+
-+/* for Edimax Print servers which use an additional header
-+ * then the firmware on flash looks like :
-+ * EDIMAX HEADER | TRX HEADER
-+ * As this header is 12 bytes long we have to handle it
-+ * and skip it to find the TRX header
-+ */
-+#define EDIMAX_PS_HEADER_MAGIC	0x36315350 /*  "PS16"  */
-+#define EDIMAX_PS_HEADER_LEN	0xc /* 12 bytes long for edimax header */
-+
-+#define NVRAM_SPACE 0x8000
-+
-+#define ROUTER_NETGEAR_WGR614L         1
-+#define ROUTER_NETGEAR_WNR834B         2
-+#define ROUTER_NETGEAR_WNDR3300        3
-+#define ROUTER_NETGEAR_WNR3500L        4
-+#define ROUTER_SIMPLETECH_SIMPLESHARE  5
-+
-+static struct mtd_partition bcm47xx_parts[] = {
-+	{ name: "cfe",	offset:0, size:0, mask_flags:MTD_WRITEABLE, },
-+	{ name: "linux", offset:0, size:0, },
-+	{ name: "rootfs", offset:0, size:0, },
-+	{ name: "nvram", offset:0, size:0, },
-+	{ name: NULL, }, /* Used to create custom partitons with the function get_router() */
-+	{ name: NULL, },
-+};
-+
-+static int
-+find_cfe_size(struct mtd_info *mtd)
-+{
-+	struct trx_header *trx;
-+	unsigned char buf[512];
-+	int off;
-+	size_t len;
-+	int blocksize;
-+
-+	trx = (struct trx_header *) buf;
-+
-+	blocksize = mtd->erasesize;
-+	if (blocksize < 0x10000)
-+		blocksize = 0x10000;
-+
-+	for (off = (128*1024); off < mtd->size; off += blocksize) {
-+		memset(buf, 0xe5, sizeof(buf));
-+
-+		/*
-+		 * Read into buffer
-+		 */
-+		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
-+		    len != sizeof(buf))
-+			continue;
-+
-+		if (le32_to_cpu(trx->magic) == EDIMAX_PS_HEADER_MAGIC) {
-+			if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
-+			    sizeof(buf), &len, buf) || len != sizeof(buf)) {
-+				continue;
-+			} else {
-+				pr_notice("Found edimax header\n");
-+			}
-+		}
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx->magic) == TRX_MAGIC)
-+			goto found;
-+	}
-+
-+	pr_notice("%s: Couldn't find bootloader size\n", mtd->name);
-+	return -1;
-+
-+ found:
-+	pr_notice("bootloader size: %d\n", off);
-+	return off;
-+
-+}
-+
-+/*
-+ * Copied from mtdblock.c
-+ *
-+ * Cache stuff...
-+ *
-+ * Since typical flash erasable sectors are much larger than what Linux's
-+ * buffer cache can handle, we must implement read-modify-write on flash
-+ * sectors for each block write requests.  To avoid over-erasing flash sectors
-+ * and to speed things up, we locally cache a whole flash sector while it is
-+ * being written to until a different sector is required.
-+ */
-+
-+static void erase_callback(struct erase_info *done)
-+{
-+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-+	wake_up(wait_q);
-+}
-+
-+static int erase_write(struct mtd_info *mtd, unsigned long pos,
-+			int len, const char *buf)
-+{
-+	struct erase_info erase;
-+	DECLARE_WAITQUEUE(wait, current);
-+	wait_queue_head_t wait_q;
-+	size_t retlen;
-+	int ret;
-+
-+	/*
-+	 * First, let's erase the flash block.
-+	 */
-+
-+	init_waitqueue_head(&wait_q);
-+	erase.mtd = mtd;
-+	erase.callback = erase_callback;
-+	erase.addr = pos;
-+	erase.len = len;
-+	erase.priv = (u_long)&wait_q;
-+
-+	set_current_state(TASK_INTERRUPTIBLE);
-+	add_wait_queue(&wait_q, &wait);
-+
-+	ret = mtd->erase(mtd, &erase);
-+	if (ret) {
-+		set_current_state(TASK_RUNNING);
-+		remove_wait_queue(&wait_q, &wait);
-+		pr_warn("erase of region [0x%lx, 0x%x] on \"%s\" failed\n",
-+			pos, len, mtd->name);
-+		return ret;
-+	}
-+
-+	schedule();  /* Wait for erase to finish. */
-+	remove_wait_queue(&wait_q, &wait);
-+
-+	/*
-+	 * Next, write data to flash.
-+	 */
-+
-+	ret = mtd->write(mtd, pos, len, &retlen, buf);
-+	if (ret)
-+		return ret;
-+	if (retlen != len)
-+		return -EIO;
-+	return 0;
-+}
-+
-+
-+static int
-+find_dual_image_off(struct mtd_info *mtd)
-+{
-+	struct trx_header trx;
-+	int off, blocksize;
-+	size_t len;
-+
-+	blocksize = mtd->erasesize;
-+	if (blocksize < 0x10000)
-+		blocksize = 0x10000;
-+
-+	for (off = (128*1024); off < mtd->size; off += blocksize) {
-+		memset(&trx, 0xe5, sizeof(trx));
-+		/*
-+		* Read into buffer
-+		*/
-+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
-+		    len != sizeof(trx))
-+			continue;
-+		/* found last TRX header */
-+		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
-+			if (le32_to_cpu(trx.flag_version >> 16) == 2) {
-+				pr_notice("dual image TRX header found\n");
-+				return mtd->size / 2;
-+			} else {
-+				return 0;
-+			}
-+		}
-+	}
-+	return 0;
-+}
-+
-+
-+static int
-+find_root(struct mtd_info *mtd, struct mtd_partition *part)
-+{
-+	struct trx_header trx, *trx2;
-+	unsigned char buf[512], *block;
-+	int off, blocksize, trxoff = 0;
-+	u32 i, crc = ~0;
-+	size_t len;
-+	bool edimax = false;
-+
-+	blocksize = mtd->erasesize;
-+	if (blocksize < 0x10000)
-+		blocksize = 0x10000;
-+
-+	for (off = (128*1024); off < mtd->size; off += blocksize) {
-+		memset(&trx, 0xe5, sizeof(trx));
-+
-+		/*
-+		 * Read into buffer
-+		 */
-+		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
-+		    len != sizeof(trx))
-+			continue;
-+
-+		/* found an edimax header */
-+		if (le32_to_cpu(trx.magic) == EDIMAX_PS_HEADER_MAGIC) {
-+			/* read the correct trx header */
-+			if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
-+			    sizeof(trx), &len, (char *) &trx) ||
-+			    len != sizeof(trx)) {
-+				continue;
-+			} else {
-+				pr_notice("Found an edimax ps header\n");
-+				edimax = true;
-+			}
-+		}
-+
-+		/* found a TRX header */
-+		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
-+			part->offset = le32_to_cpu(trx.offsets[2]) ? :
-+				le32_to_cpu(trx.offsets[1]);
-+			part->size = le32_to_cpu(trx.len);
-+
-+			part->size -= part->offset;
-+			part->offset += off;
-+			if (edimax) {
-+				off += EDIMAX_PS_HEADER_LEN;
-+				trxoff = EDIMAX_PS_HEADER_LEN;
-+			}
-+
-+			goto found;
-+		}
-+	}
-+
-+	pr_warn("%s: Couldn't find root filesystem\n",
-+	       mtd->name);
-+	return -1;
-+
-+ found:
-+	pr_notice("TRX offset : %x\n", trxoff);
-+	if (part->size == 0)
-+		return 0;
-+
-+	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
-+		return 0;
-+
-+	/* Move the fs outside of the trx */
-+	part->size = 0;
-+
-+	if (trx.len != part->offset + part->size - off) {
-+		/* Update the trx offsets and length */
-+		trx.len = part->offset + part->size - off;
-+
-+		/* Update the trx crc32 */
-+		for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
-+			if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
-+				return 0;
-+			crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
-+		}
-+		trx.crc32 = crc;
-+
-+		/* read first eraseblock from the trx */
-+		block = kmalloc(mtd->erasesize, GFP_KERNEL);
-+		trx2 = (struct trx_header *) block;
-+		if (mtd->read(mtd, off - trxoff, mtd->erasesize, &len, block) || len != mtd->erasesize) {
-+			pr_err("Error accessing the first trx eraseblock\n");
-+			return 0;
-+		}
-+
-+		pr_notice("Updating TRX offsets and length:\n");
-+		pr_notice("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
-+		pr_notice("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n",   trx.offsets[0],   trx.offsets[1],   trx.offsets[2],   trx.len, trx.crc32);
-+
-+		/* Write updated trx header to the flash */
-+		memcpy(block + trxoff, &trx, sizeof(trx));
-+		if (mtd->unlock)
-+			mtd->unlock(mtd, off - trxoff, mtd->erasesize);
-+		erase_write(mtd, off - trxoff, mtd->erasesize, block);
-+		if (mtd->sync)
-+			mtd->sync(mtd);
-+		kfree(block);
-+		pr_notice("Done\n");
-+	}
-+
-+	return part->size;
-+}
-+
-+static int get_router(void)
-+{
-+	char buf[20];
-+	u32 boardnum = 0;
-+	u16 boardtype = 0;
-+	u16 boardrev = 0;
-+	u32 boardflags = 0;
-+	u16 sdram_init = 0;
-+	u16 cardbus = 0;
-+	u16 strev = 0;
-+
-+	if (nvram_getenv("boardnum", buf, sizeof(buf)) >= 0)
-+		boardnum = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
-+		boardtype = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
-+		boardrev = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0)
-+		boardflags = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("sdram_init", buf, sizeof(buf)) >= 0)
-+		sdram_init = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
-+		cardbus = simple_strtoul(buf, NULL, 0);
-+	if (nvram_getenv("st_rev", buf, sizeof(buf)) >= 0)
-+		strev = simple_strtoul(buf, NULL, 0);
-+
-+	if ((boardnum == 8 || boardnum == 01)
-+	  && boardtype == 0x0472 && cardbus == 1) {
-+		/* Netgear WNR834B, Netgear WNR834Bv2 */
-+		return ROUTER_NETGEAR_WNR834B;
-+	}
-+
-+	if (boardnum == 01 && boardtype == 0x0472 && boardrev == 0x23) {
-+		/* Netgear WNDR-3300 */
-+		return ROUTER_NETGEAR_WNDR3300;
-+	}
-+
-+	if ((boardnum == 83258 || boardnum == 01)
-+	  && boardtype == 0x048e
-+	  && (boardrev == 0x11 || boardrev == 0x10)
-+	  && boardflags == 0x750
-+	  && sdram_init == 0x000A) {
-+		/* Netgear WGR614v8/L/WW 16MB ram, cfe v1.3 or v1.5 */
-+		return ROUTER_NETGEAR_WGR614L;
-+	}
-+
-+	if ((boardnum == 1 || boardnum == 3500)
-+	  && boardtype == 0x04CF
-+	  && (boardrev == 0x1213 || boardrev == 02)) {
-+		/* Netgear WNR3500v2/U/L */
-+		return ROUTER_NETGEAR_WNR3500L;
-+	}
-+
-+	if (boardtype == 0x042f
-+	  && boardrev == 0x10
-+	  && boardflags == 0
-+	  && strev == 0x11) {
-+		/* Simpletech Simpleshare */
-+		return ROUTER_SIMPLETECH_SIMPLESHARE;
-+	}
-+
-+	return 0;
-+}
-+
-+static int parse_bcm47xx_partitions(struct mtd_info *mtd,
-+				    struct mtd_partition **pparts,
-+//				    struct mtd_part_parser_data *data)
-+				    unsigned long data)
-+{
-+	int cfe_size;
-+	int dual_image_offset = 0;
-+	/* e.g Netgear 0x003e0000-0x003f0000 : "board_data", we exclude this
-+	 * part from our mapping to prevent overwriting len/checksum on e.g.
-+	 * Netgear WGR614v8/L/WW
-+	 */
-+	int custom_data_size = 0;
-+
-+	cfe_size = find_cfe_size(mtd);
-+	if (cfe_size < 0)
-+		return 0;
-+
-+	/* boot loader */
-+	bcm47xx_parts[0].offset = 0;
-+	bcm47xx_parts[0].size   = cfe_size;
-+
-+	/* nvram */
-+	if (cfe_size != 384 * 1024) {
-+
-+		switch (get_router()) {
-+		case ROUTER_NETGEAR_WGR614L:
-+		case ROUTER_NETGEAR_WNR834B:
-+		case ROUTER_NETGEAR_WNDR3300:
-+		case ROUTER_NETGEAR_WNR3500L:
-+			/* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
-+			 * is @ 0x007AFFF8 for 8M flash
-+			 */
-+			custom_data_size = mtd->erasesize;
-+
-+			bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+			bcm47xx_parts[3].size   = roundup(NVRAM_SPACE, mtd->erasesize);
-+
-+			/* Place CFE board_data into a partition */
-+			bcm47xx_parts[4].name = "board_data";
-+			bcm47xx_parts[4].offset = bcm47xx_parts[3].offset - custom_data_size;
-+			bcm47xx_parts[4].size   =  custom_data_size;
-+			break;
-+
-+		case ROUTER_SIMPLETECH_SIMPLESHARE:
-+			/* Fixup Simpletech Simple share nvram  */
-+
-+			pr_notice("Setting up simpletech nvram\n");
-+			custom_data_size = mtd->erasesize;
-+
-+			bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize) * 2;
-+			bcm47xx_parts[3].size   = roundup(NVRAM_SPACE, mtd->erasesize);
-+
-+			/* Place backup nvram into a partition */
-+			bcm47xx_parts[4].name = "nvram_copy";
-+			bcm47xx_parts[4].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+			bcm47xx_parts[4].size   = roundup(NVRAM_SPACE, mtd->erasesize);
-+			break;
-+
-+		default:
-+			bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+			bcm47xx_parts[3].size   = roundup(NVRAM_SPACE, mtd->erasesize);
-+		}
-+
-+	} else {
-+		/* nvram (old 128kb config partition on netgear wgt634u) */
-+		bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
-+		bcm47xx_parts[3].size   = roundup(NVRAM_SPACE, mtd->erasesize);
-+	}
-+
-+	/* dual image offset*/
-+	pr_notice("Looking for dual image\n");
-+	dual_image_offset = find_dual_image_off(mtd);
-+	/* linux (kernel and rootfs) */
-+	if (cfe_size != 384 * 1024) {
-+		if (get_router() == ROUTER_SIMPLETECH_SIMPLESHARE) {
-+			bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
-+			bcm47xx_parts[1].size   = bcm47xx_parts[4].offset - dual_image_offset -
-+				bcm47xx_parts[1].offset - custom_data_size;
-+		} else {
-+			bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
-+			bcm47xx_parts[1].size   = bcm47xx_parts[3].offset - dual_image_offset -
-+				bcm47xx_parts[1].offset - custom_data_size;
-+		}
-+	} else {
-+		/* do not count the elf loader, which is on one block */
-+		bcm47xx_parts[1].offset = bcm47xx_parts[0].size +
-+			bcm47xx_parts[3].size + mtd->erasesize;
-+		bcm47xx_parts[1].size   = mtd->size -
-+			bcm47xx_parts[0].size -
-+			(2*bcm47xx_parts[3].size) -
-+			mtd->erasesize - custom_data_size;
-+	}
-+
-+	/* find and size rootfs */
-+	find_root(mtd, &bcm47xx_parts[2]);
-+	bcm47xx_parts[2].size = mtd->size - dual_image_offset -
-+				bcm47xx_parts[2].offset -
-+				bcm47xx_parts[3].size - custom_data_size;
-+	*pparts = bcm47xx_parts;
-+	return bcm47xx_parts[4].name == NULL ? 4 : 5;
-+}
-+
-+static struct mtd_part_parser bcm47xx_parser = {
-+	.owner = THIS_MODULE,
-+	.parse_fn = parse_bcm47xx_partitions,
-+	.name = "bcm47xx",
-+};
-+
-+static int __init bcm47xx_parser_init(void)
-+{
-+	return register_mtd_parser(&bcm47xx_parser);
-+}
-+
-+static void __exit bcm47xx_parser_exit(void)
-+{
-+	deregister_mtd_parser(&bcm47xx_parser);
-+}
-+
-+module_init(bcm47xx_parser_init);
-+module_exit(bcm47xx_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Parsing code for flash partitions on bcm47xx SoCs");
diff --git a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
deleted file mode 100644
index 0ab81f33b8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From fb261916ee9cd9eede57f6255ffd39e4145da48e Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:55:18 +0200
-Subject: [PATCH 18/26] mtd: bcm47xx: add parallel flash driver
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/maps/Kconfig          |    9 ++
- drivers/mtd/maps/Makefile         |    1 +
- drivers/mtd/maps/bcm47xx-pflash.c |  198 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 208 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/maps/bcm47xx-pflash.c
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -264,6 +264,15 @@ config MTD_LANTIQ
- 	help
- 	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
- 
-+config MTD_BCM47XX_PFLASH
-+	tristate "bcm47xx parallel flash support"
-+	default y
-+	depends on BCM47XX
-+	select MTD_PARTITIONS
-+	select MTD_BCM47XX_PARTS
-+	help
-+	  Support for bcm47xx parallel flash
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr
- obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
-+obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
---- /dev/null
-+++ b/drivers/mtd/maps/bcm47xx-pflash.c
-@@ -0,0 +1,198 @@
-+/*
-+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  original functions for finding root filesystem from Mike Baker
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *  Copyright 2001-2003, Broadcom Corporation
-+ *  All Rights Reserved.
-+ *
-+ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ *  Flash mapping for BCM947XX boards
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_pflash: " fmt
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/io.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <linux/platform_device.h>
-+
-+#define WINDOW_ADDR 0x1fc00000
-+#define WINDOW_SIZE 0x400000
-+#define BUSWIDTH 2
-+
-+static struct mtd_info *bcm47xx_mtd;
-+
-+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+	if (len == 1) {
-+		memcpy_fromio(to, map->virt + from, len);
-+	} else {
-+		int i;
-+		u16 *dest = (u16 *) to;
-+		u16 *src  = (u16 *) (map->virt + from);
-+		for (i = 0; i < (len / 2); i++)
-+			dest[i] = src[i];
-+		if (len & 1)
-+			*((u8 *)dest+len-1) = src[i] & 0xff;
-+	}
-+}
-+
-+static struct map_info bcm47xx_map = {
-+	name: "Physically mapped flash",
-+	size : WINDOW_SIZE,
-+	bankwidth : BUSWIDTH,
-+	phys : WINDOW_ADDR,
-+};
-+
-+static const char *probes[] = { "bcm47xx", NULL };
-+
-+static int bcm47xx_mtd_probe(struct platform_device *pdev)
-+{
-+#ifdef CONFIG_BCM47XX_SSB
-+	struct ssb_chipcommon *ssb_cc;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	struct bcma_drv_cc *bcma_cc;
-+#endif
-+	int ret = 0;
-+	struct mtd_partition *partitions = NULL;
-+	int num_partitions = 0;
-+
-+	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+	case BCM47XX_BUS_TYPE_SSB:
-+		ssb_cc = &bcm47xx_bus.ssb.chipco;
-+		if (ssb_cc->flash_type != SSB_PFLASH)
-+			return -ENODEV;
-+
-+		bcm47xx_map.phys = ssb_cc->pflash.window;
-+		bcm47xx_map.size = ssb_cc->pflash.window_size;
-+		bcm47xx_map.bankwidth = ssb_cc->pflash.buswidth;
-+		break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+		if (bcma_cc->flash_type != BCMA_PFLASH)
-+			return -ENODEV;
-+
-+		bcm47xx_map.phys = bcma_cc->pflash.window;
-+		bcm47xx_map.size = bcma_cc->pflash.window_size;
-+		bcm47xx_map.bankwidth = bcma_cc->pflash.buswidth;
-+		break;
-+#endif
-+	}
-+
-+	pr_notice("flash init: 0x%08x 0x%08lx\n", bcm47xx_map.phys, bcm47xx_map.size);
-+	bcm47xx_map.virt = ioremap_nocache(bcm47xx_map.phys, bcm47xx_map.size);
-+
-+	if (!bcm47xx_map.virt) {
-+		pr_err("Failed to ioremap\n");
-+		return -EIO;
-+	}
-+
-+	simple_map_init(&bcm47xx_map);
-+	/* override copy_from routine */
-+	bcm47xx_map.copy_from = bcm47xx_map_copy_from;
-+
-+	bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map);
-+	if (!bcm47xx_mtd) {
-+		pr_err("Failed to do_map_probe\n");
-+		ret = -ENXIO;
-+		goto err_unmap;
-+	}
-+	bcm47xx_mtd->owner = THIS_MODULE;
-+
-+	pr_notice("Flash device: 0x%lx at 0x%x\n", bcm47xx_map.size, WINDOW_ADDR);
-+
-+	num_partitions = parse_mtd_partitions(bcm47xx_mtd, probes, &partitions, 0);
-+	if (num_partitions < 0) {
-+		ret = num_partitions;
-+		goto err_unmap;
-+	}
-+
-+	ret = mtd_device_register(bcm47xx_mtd, partitions, num_partitions);
-+
-+//	ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0);
-+
-+	if (ret) {
-+		pr_err("Flash: mtd_device_register failed\n");
-+		goto err_destroy;
-+	}
-+	return 0;
-+
-+err_destroy:
-+	map_destroy(bcm47xx_mtd);
-+err_unmap:
-+	iounmap(bcm47xx_map.virt);
-+	return ret;
-+}
-+
-+static int __devexit bcm47xx_mtd_remove(struct platform_device *pdev)
-+{
-+	mtd_device_unregister(bcm47xx_mtd);
-+	map_destroy(bcm47xx_mtd);
-+	iounmap(bcm47xx_map.virt);
-+	return 0;
-+}
-+
-+static struct platform_driver bcm47xx_mtd_driver = {
-+	.remove = __devexit_p(bcm47xx_mtd_remove),
-+	.driver = {
-+		.name = "bcm47xx_pflash",
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+static int __init init_bcm47xx_mtd(void)
-+{
-+	int ret = platform_driver_probe(&bcm47xx_mtd_driver, bcm47xx_mtd_probe);
-+
-+	if (ret)
-+		pr_err("error registering platform driver: %i\n", ret);
-+	return ret;
-+}
-+
-+static void __exit exit_bcm47xx_mtd(void)
-+{
-+	platform_driver_unregister(&bcm47xx_mtd_driver);
-+}
-+
-+module_init(init_bcm47xx_mtd);
-+module_exit(exit_bcm47xx_mtd);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch
deleted file mode 100644
index d9f961081d..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch
+++ /dev/null
@@ -1,330 +0,0 @@
-From 6a615274708fff685952139fee00ebccc0cf3266 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:55:45 +0200
-Subject: [PATCH 19/26] mtd: bcm47xx: add serial flash driver
-
-sflash get the sflash ops from platform device
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/include/asm/mach-bcm47xx/bus.h |    3 +
- drivers/mtd/maps/Kconfig                 |    9 +
- drivers/mtd/maps/Makefile                |    1 +
- drivers/mtd/maps/bcm47xx-sflash.c        |  267 ++++++++++++++++++++++++++++++
- 4 files changed, 280 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/maps/bcm47xx-sflash.c
-
---- a/arch/mips/include/asm/mach-bcm47xx/bus.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
-@@ -11,6 +11,7 @@
- 
- #include <linux/ssb/ssb.h>
- #include <linux/bcma/bcma.h>
-+#include <linux/mtd/mtd.h>
- #include <bcm47xx.h>
- 
- struct bcm47xx_sflash {
-@@ -29,6 +30,8 @@ struct bcm47xx_sflash {
- 	u32 blocksize;		/* Block size */
- 	u32 numblocks;		/* Number of blocks */
- 	u32 size;		/* Total size in bytes */
-+
-+	struct mtd_info *mtd;
- };
- 
- void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -273,6 +273,15 @@ config MTD_BCM47XX_PFLASH
- 	help
- 	  Support for bcm47xx parallel flash
- 
-+config MTD_BCM47XX_SFLASH
-+	tristate "bcm47xx serial flash support"
-+	default y
-+	depends on BCM47XX
-+	select MTD_PARTITIONS
-+	select MTD_BCM47XX_PARTS
-+	help
-+	  Support for bcm47xx parallel flash
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-f
- obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
- obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
-+obj-$(CONFIG_MTD_BCM47XX_SFLASH)+= bcm47xx-sflash.o
---- /dev/null
-+++ b/drivers/mtd/maps/bcm47xx-sflash.c
-@@ -0,0 +1,267 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_sflash: " fmt
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <bcm47xx.h>
-+#include <bus.h>
-+
-+static int
-+sflash_mtd_poll(struct bcm47xx_sflash *sflash, unsigned int offset, int timeout)
-+{
-+	unsigned long now = jiffies;
-+	int ret = 0;
-+
-+	for (;;) {
-+		if (!sflash->poll(sflash, offset)) {
-+			ret = 0;
-+			break;
-+		}
-+		if (time_after(jiffies, now + timeout)) {
-+			pr_err("timeout while polling\n");
-+			ret = -ETIMEDOUT;
-+			break;
-+		}
-+		udelay(1);
-+	}
-+
-+	return ret;
-+}
-+
-+static int
-+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+
-+	/* Check address range */
-+	if (!len)
-+		return 0;
-+
-+	if ((from + len) > mtd->size)
-+		return -EINVAL;
-+
-+	*retlen = 0;
-+
-+	while (len) {
-+		int ret = sflash->read(sflash, from, len, buf);
-+		if (ret < 0)
-+			return ret;
-+
-+		from += (loff_t) ret;
-+		len -= ret;
-+		buf += ret;
-+		*retlen += ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+
-+	/* Check address range */
-+	if (!len)
-+		return 0;
-+
-+	if ((to + len) > mtd->size)
-+		return -EINVAL;
-+
-+	*retlen = 0;
-+	while (len) {
-+		int bytes;
-+		int ret = sflash->write(sflash, to, len, buf);
-+		if (ret < 0)
-+			return ret;
-+
-+		bytes = ret;
-+
-+		ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
-+		if (ret)
-+			return ret;
-+
-+		to += (loff_t) bytes;
-+		len -= bytes;
-+		buf += bytes;
-+		*retlen += bytes;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
-+{
-+	struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+	int i, j, ret = 0;
-+	unsigned int addr, len;
-+
-+	/* Check address range */
-+	if (!erase->len)
-+		return 0;
-+	if ((erase->addr + erase->len) > mtd->size)
-+		return -EINVAL;
-+
-+	addr = erase->addr;
-+	len = erase->len;
-+
-+	/* Ensure that requested regions are aligned */
-+	for (i = 0; i < mtd->numeraseregions; i++) {
-+		for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
-+			if (addr == mtd->eraseregions[i].offset +
-+					mtd->eraseregions[i].erasesize * j &&
-+			    len >= mtd->eraseregions[i].erasesize) {
-+				ret = sflash->erase(sflash, addr);
-+				if (ret < 0)
-+					break;
-+				ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
-+				if (ret)
-+					break;
-+				addr += mtd->eraseregions[i].erasesize;
-+				len -= mtd->eraseregions[i].erasesize;
-+			}
-+		}
-+		if (ret)
-+			break;
-+	}
-+
-+	/* Set erase status */
-+	if (ret)
-+		erase->state = MTD_ERASE_FAILED;
-+	else
-+		erase->state = MTD_ERASE_DONE;
-+
-+	/* Call erase callback */
-+	if (erase->callback)
-+		erase->callback(erase);
-+
-+	return ret;
-+}
-+
-+static const char *probes[] = { "bcm47xx", NULL };
-+
-+static int bcm47xx_sflash_probe(struct platform_device *pdev)
-+{
-+	struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
-+	struct mtd_info *mtd;
-+	struct mtd_erase_region_info *regions;
-+	int ret = 0;
-+
-+	struct mtd_partition *parts;
-+	int num_partitions = 0;
-+
-+	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+	if (!mtd)
-+		return -ENOMEM;
-+
-+	regions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
-+	if (!mtd)
-+		return -ENOMEM;
-+
-+	pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
-+		sflash->blocksize/1024, sflash->numblocks, sflash->size / 1024);
-+
-+	/* Setup region info */
-+	regions->offset = 0;
-+	regions->erasesize = sflash->blocksize;
-+	regions->numblocks = sflash->numblocks;
-+	if (regions->erasesize > mtd->erasesize)
-+		mtd->erasesize = regions->erasesize;
-+	mtd->size = sflash->size;
-+	mtd->numeraseregions = 1;
-+
-+	/* Register with MTD */
-+	mtd->name = "bcm47xx-sflash";
-+	mtd->type = MTD_NORFLASH;
-+	mtd->flags = MTD_CAP_NORFLASH;
-+	mtd->eraseregions = regions;
-+	mtd->erase = sflash_mtd_erase;
-+	mtd->read = sflash_mtd_read;
-+	mtd->write = sflash_mtd_write;
-+	mtd->writesize = 1;
-+	mtd->priv = sflash;
-+	mtd->owner = THIS_MODULE;
-+
-+	num_partitions = parse_mtd_partitions(mtd, probes, &parts, 0);
-+	if (num_partitions < 0) {
-+		ret = num_partitions;
-+		goto err_destroy;
-+	}
-+
-+	ret = mtd_device_register(mtd, parts, num_partitions);
-+
-+//	ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0);
-+
-+	if (ret) {
-+		pr_err("mtd_device_register failed\n");
-+		return ret;
-+	}
-+	sflash->mtd = mtd;
-+	return 0;
-+
-+err_destroy:
-+	map_destroy(mtd);
-+	return ret;
-+}
-+
-+static int __devexit bcm47xx_sflash_remove(struct platform_device *pdev)
-+{
-+	struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
-+
-+	if (sflash) {
-+		mtd_device_unregister(sflash->mtd);
-+		map_destroy(sflash->mtd);
-+		kfree(sflash->mtd->eraseregions);
-+		kfree(sflash->mtd);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver bcm47xx_sflash_driver = {
-+	.remove = __devexit_p(bcm47xx_sflash_remove),
-+	.driver = {
-+		.name = "bcm47xx_sflash",
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+static int __init init_bcm47xx_sflash(void)
-+{
-+	int ret = platform_driver_probe(&bcm47xx_sflash_driver, bcm47xx_sflash_probe);
-+
-+	if (ret)
-+		pr_err("error registering platform driver: %i\n", ret);
-+	return ret;
-+}
-+
-+static void __exit exit_bcm47xx_sflash(void)
-+{
-+	platform_driver_unregister(&bcm47xx_sflash_driver);
-+}
-+
-+module_init(init_bcm47xx_sflash);
-+module_exit(exit_bcm47xx_sflash);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch b/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch
deleted file mode 100644
index 9c57a62c36..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 64f3d068654589d6114048ac5933cd4498706cfc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 15:02:10 +0200
-Subject: [PATCH 20/26] bcm47xx: register flash drivers
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/setup.c |   72 +++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 72 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -30,10 +30,12 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/platform_device.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
- #include <bcm47xx.h>
-+#include <bus.h>
- #include <asm/mach-bcm47xx/nvram.h>
- 
- union bcm47xx_bus bcm47xx_bus;
-@@ -365,3 +367,73 @@ static int __init bcm47xx_register_bus_c
- 	return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
-+
-+static struct resource bcm47xx_pflash_resource = {
-+	.name	= "bcm47xx_pflash",
-+	.start	= 0,
-+	.end	= 0,
-+	.flags  = 0,
-+};
-+
-+static struct platform_device bcm47xx_pflash_dev = {
-+	.name		= "bcm47xx_pflash",
-+	.resource	= &bcm47xx_pflash_resource,
-+	.num_resources	= 1,
-+};
-+
-+static struct resource bcm47xx_sflash_resource = {
-+	.name	= "bcm47xx_sflash",
-+	.start	= 0,
-+	.end	= 0,
-+	.flags  = 0,
-+};
-+
-+static struct platform_device bcm47xx_sflash_dev = {
-+	.name		= "bcm47xx_sflash",
-+	.resource	= &bcm47xx_sflash_resource,
-+	.num_resources	= 1,
-+};
-+
-+static int __init bcm47xx_register_flash(void)
-+{
-+#ifdef CONFIG_BCM47XX_SSB
-+	struct ssb_chipcommon *chipco;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	struct bcma_drv_cc *drv_cc;
-+#endif
-+	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+	case BCM47XX_BUS_TYPE_SSB:
-+		chipco = &bcm47xx_bus.ssb.chipco;
-+		if (chipco->flash_type == SSB_PFLASH) {
-+			bcm47xx_pflash_resource.start = chipco->pflash.window;
-+			bcm47xx_pflash_resource.end = chipco->pflash.window + chipco->pflash.window_size;
-+			return platform_device_register(&bcm47xx_pflash_dev);
-+		} else if (chipco->flash_type == SSB_SFLASH) {
-+			bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
-+			return platform_device_register(&bcm47xx_sflash_dev);
-+		} else {
-+			printk(KERN_ERR "No flash device found\n");
-+			return -1;
-+		}
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		drv_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+		if (drv_cc->flash_type == BCMA_PFLASH) {
-+			bcm47xx_pflash_resource.start = drv_cc->pflash.window;
-+			bcm47xx_pflash_resource.end = drv_cc->pflash.window + drv_cc->pflash.window_size;
-+			return platform_device_register(&bcm47xx_pflash_dev);
-+		} else if (drv_cc->flash_type == BCMA_SFLASH) {
-+			bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
-+			return platform_device_register(&bcm47xx_sflash_dev);
-+		} else {
-+			printk(KERN_ERR "No flash device found\n");
-+			return -1;
-+		}
-+#endif
-+	}
-+	return -1;
-+}
-+fs_initcall(bcm47xx_register_flash);
diff --git a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch b/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch
deleted file mode 100644
index 2cce8b97b9..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3e889f1cf928c6d87229761a0bc4c18c775a988b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 21:13:32 +0200
-Subject: [PATCH 21/26] add workarround for wndr3400
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/bcm47xxpart.c |   17 ++++++++++++-----
- 1 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -78,11 +78,12 @@ struct trx_header {
- 
- #define NVRAM_SPACE 0x8000
- 
--#define ROUTER_NETGEAR_WGR614L         1
--#define ROUTER_NETGEAR_WNR834B         2
--#define ROUTER_NETGEAR_WNDR3300        3
--#define ROUTER_NETGEAR_WNR3500L        4
--#define ROUTER_SIMPLETECH_SIMPLESHARE  5
-+#define ROUTER_NETGEAR_WGR614L		1
-+#define ROUTER_NETGEAR_WNR834B		2
-+#define ROUTER_NETGEAR_WNDR3300		3
-+#define ROUTER_NETGEAR_WNR3500L		4
-+#define ROUTER_SIMPLETECH_SIMPLESHARE	5
-+#define ROUTER_NETGEAR_WNDR3400		6
- 
- static struct mtd_partition bcm47xx_parts[] = {
- 	{ name: "cfe",	offset:0, size:0, mask_flags:MTD_WRITEABLE, },
-@@ -400,6 +401,11 @@ static int get_router(void)
- 		return ROUTER_NETGEAR_WNR3500L;
- 	}
- 
-+	if (boardnum == 1 && boardtype == 0xb4cf && boardrev == 0x1100) {
-+		/* Netgear WNDR3400 */
-+		return ROUTER_NETGEAR_WNDR3400;
-+	}
-+
- 	if (boardtype == 0x042f
- 	  && boardrev == 0x10
- 	  && boardflags == 0
-@@ -440,6 +446,7 @@ static int parse_bcm47xx_partitions(stru
- 		case ROUTER_NETGEAR_WNR834B:
- 		case ROUTER_NETGEAR_WNDR3300:
- 		case ROUTER_NETGEAR_WNR3500L:
-+		case ROUTER_NETGEAR_WNDR3400:
- 			/* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
- 			 * is @ 0x007AFFF8 for 8M flash
- 			 */
diff --git a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch b/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
deleted file mode 100644
index fee1d0a5a6..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From e6730c06cfc827d715f43e9bd276ae939bb86af9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 22 Jul 2011 17:11:51 +0200
-Subject: [PATCH 23/26] bcma: use randoom mac address as long as reading it out does not work
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/sprom.c |    5 ++++-
- 1 files changed, 4 insertions(+), 1 deletions(-)
-
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -13,6 +13,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
- 
- #define SPOFF(offset)	((offset) / sizeof(u16))
- 
-@@ -214,8 +215,10 @@ int bcma_sprom_get(struct bcma_bus *bus)
- 	if (!bus->drv_cc.core)
- 		return -EOPNOTSUPP;
- 
--	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
-+	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) {
-+		random_ether_addr(bus->sprom.il0mac);
- 		return -ENOENT;
-+	}
- 
- 	sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- 			GFP_KERNEL);
diff --git a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch b/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch
deleted file mode 100644
index d3781b8fe5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 1d693b2c9d5943cbe938f879041b837cd004737f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 23 Jul 2011 18:29:38 +0200
-Subject: [PATCH 25/26] bcm47xx: read nvram from sflash
-
-bcm47xx: add sflash support to nvram
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c |   86 +++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 84 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -20,11 +20,12 @@
- #include <asm/addrspace.h>
- #include <asm/mach-bcm47xx/nvram.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <asm/mach-bcm47xx/bus.h>
- 
- static char nvram_buf[NVRAM_SPACE];
- 
- /* Probe for NVRAM header */
--static void early_nvram_init(void)
-+static void early_nvram_init_pflash(void)
- {
- #ifdef CONFIG_BCM47XX_SSB
- 	struct ssb_chipcommon *ssb_cc;
-@@ -86,7 +87,88 @@ found:
- 	for (i = 0; i < sizeof(struct nvram_header); i += 4)
- 		*dst++ = *src++;
- 	for (; i < header->len && i < NVRAM_SPACE; i += 4)
--		*dst++ = le32_to_cpu(*src++);
-+		*dst++ = *src++;
-+}
-+
-+static int early_nvram_init_sflash(void)
-+{
-+	struct nvram_header header;
-+	u32 off;
-+	int ret;
-+	char *dst;
-+	int len;
-+
-+	/* check if the struct is already initilized */
-+	if (!bcm47xx_sflash.size)
-+		return -1;
-+
-+	off = FLASH_MIN;
-+	while (off <= bcm47xx_sflash.size) {
-+		ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - NVRAM_SPACE, sizeof(header), (u8 *)&header);
-+		if (ret != sizeof(header))
-+			return ret;
-+		if (header.magic == NVRAM_HEADER)
-+			goto found;
-+		off <<= 1;
-+	}
-+
-+	off = FLASH_MIN;
-+	while (off <= bcm47xx_sflash.size) {
-+		ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), sizeof(header), (u8 *)&header);
-+		if (ret != sizeof(header))
-+			return ret;
-+		if (header.magic == NVRAM_HEADER)
-+			goto found;
-+		off <<= 1;
-+	}
-+	return -1;
-+
-+found:
-+	len = NVRAM_SPACE;
-+	dst = nvram_buf;
-+	while (len) {
-+		ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), len, dst);
-+		if (ret < 0)
-+			return ret;
-+		off += ret;
-+		len -= ret;
-+		dst += ret;
-+	}
-+	return 0;
-+}
-+
-+static void early_nvram_init(void)
-+{
-+	int err = 0;
-+
-+	switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+	case BCM47XX_BUS_TYPE_SSB:
-+		if (bcm47xx_bus.ssb.chipco.flash_type == SSB_PFLASH) {
-+			early_nvram_init_pflash();
-+		} else if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH) {
-+			err = early_nvram_init_sflash();
-+			if (err < 0)
-+				printk(KERN_WARNING "can not read from flash: %i\n", err);
-+		} else {
-+			printk(KERN_WARNING "unknow flash type\n");
-+		}
-+		break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+	case BCM47XX_BUS_TYPE_BCMA:
-+		if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_PFLASH) {
-+			early_nvram_init_pflash();
-+		} else if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH) {
-+			err = early_nvram_init_sflash();
-+			if (err < 0)
-+				printk(KERN_WARNING "can not read from flash: %i\n", err);
-+		} else {
-+			printk(KERN_WARNING "unknow flash type\n");
-+		}
-+		break;
-+#endif
-+	}
- }
- 
- int nvram_getenv(char *name, char *val, size_t val_len)
diff --git a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch b/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch
deleted file mode 100644
index 7c8cd79635..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 4 Aug 2011 21:09:48 +0200
-Subject: [PATCH 26/26] bcma: export needed gpio functions
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -80,16 +80,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
- {
- 	return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
- 
- u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
- 
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
- 
- u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -101,11 +104,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
- 
- u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
- 
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
diff --git a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
deleted file mode 100644
index d74dfcb73e..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 20 Nov 2011 18:22:35 +0100
-Subject: [PATCH 15/21] bcma: scan for extra address space
-
-Some cores like the USB core have two address spaces. In the USB host
-controller one address space is used for the OHCI and the other for the
-EHCI controller interface. The USB controller is the only core I found
-with two address spaces. This code is based on the AI scan function
-ai_scan() in shared/aiutils.c i the Broadcom SDK.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/scan.c       |   17 ++++++++++++++++-
- include/linux/bcma/bcma.h |    1 +
- 2 files changed, 17 insertions(+), 1 deletions(-)
-
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm
- 			return -EILSEQ;
- 	}
- 
-+
-+	/* First Slave Address Descriptor should be port 0:
-+	 * the main register space for the core
-+	 */
-+	tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
-+	if (tmp < 0) {
-+		/* Try again to see if it is a bridge */
-+		tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0);
-+		if (tmp) {
-+			printk("found bridge\n");
-+		}
-+
-+	}
-+	core->addr = tmp;
-+
- 	/* get & parse slave ports */
- 	for (i = 0; i < ports[1]; i++) {
- 		for (j = 0; ; j++) {
-@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm
- 				break;
- 			} else {
- 				if (i == 0 && j == 0)
--					core->addr = tmp;
-+					core->addr1 = tmp;
- 			}
- 		}
- 	}
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -138,6 +138,7 @@ struct bcma_device {
- 	u8 core_index;
- 
- 	u32 addr;
-+	u32 addr1;
- 	u32 wrap;
- 
- 	void __iomem *io_addr;
diff --git a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch b/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
deleted file mode 100644
index 2c0462fea3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 27 Nov 2011 14:01:01 +0100
-Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?=
- =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This function checks if a reg get set or cleared every 10 microseconds.
-It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to
-reduce code duplication. In addition it is needed in the USB host
-driver.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/core.c       |   48 ++++++++++++++++++++++++++++----------------
- include/linux/bcma/bcma.h |    2 +
- 2 files changed, 32 insertions(+), 18 deletions(-)
-
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -51,11 +51,36 @@ int bcma_core_enable(struct bcma_device
- }
- EXPORT_SYMBOL_GPL(bcma_core_enable);
- 
-+/* Wait for bitmask in a register to get set or cleared.
-+ * timeout is in units of ten-microseconds.
-+ */
-+int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout,
-+		   int set)
-+{
-+	int i;
-+	u32 val;
-+
-+	for (i = 0; i < timeout; i++) {
-+		val = bcma_read32(dev, reg);
-+		if (set) {
-+			if ((val & bitmask) == bitmask)
-+				return 0;
-+		} else {
-+			if (!(val & bitmask))
-+				return 0;
-+		}
-+		udelay(10);
-+	}
-+	pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n",
-+	       bitmask, reg, (set ? "set" : "clear"));
-+
-+	return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(bcma_wait_bits);
-+
- void bcma_core_set_clockmode(struct bcma_device *core,
- 			     enum bcma_clkmode clkmode)
- {
--	u16 i;
--
- 	WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
- 		core->id.id != BCMA_CORE_PCIE &&
- 		core->id.id != BCMA_CORE_80211);
-@@ -64,15 +89,8 @@ void bcma_core_set_clockmode(struct bcma
- 	case BCMA_CLKMODE_FAST:
- 		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
- 		udelay(64);
--		for (i = 0; i < 1500; i++) {
--			if (bcma_read32(core, BCMA_CLKCTLST) &
--			    BCMA_CLKCTLST_HAVEHT) {
--				i = 0;
--				break;
--			}
--			udelay(10);
--		}
--		if (i)
-+		if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT,
-+				   1500, 1))
- 			pr_err("HT force timeout\n");
- 		break;
- 	case BCMA_CLKMODE_DYNAMIC:
-@@ -84,22 +102,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod
- 
- void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
- {
--	u16 i;
--
- 	WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
- 	WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
- 
- 	if (on) {
- 		bcma_set32(core, BCMA_CLKCTLST, req);
--		for (i = 0; i < 10000; i++) {
--			if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
--			    status) {
--				i = 0;
--				break;
--			}
--			udelay(10);
--		}
--		if (i)
-+		if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1))
- 			pr_err("PLL enable timeout\n");
- 	} else {
- 		pr_warn("Disabling PLL not supported yet!\n");
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct
- 	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
- }
- 
-+extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
-+			  int timeout, int set);
-+
- extern bool bcma_core_is_enabled(struct bcma_device *core);
- extern void bcma_core_disable(struct bcma_device *core, u32 flags);
- extern int bcma_core_enable(struct bcma_device *core, u32 flags);
diff --git a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
deleted file mode 100644
index 6f22aa0508..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From b39adeae5b06e40699c174ed78ca7c45b8d7976f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:20:54 +0100
-Subject: [PATCH 17/21] USB: OHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their OHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB OHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig         |   10 ++
- drivers/usb/host/ohci-hcd.c      |   21 ++++-
- drivers/usb/host/ohci-platform.c |  197 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 227 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
- 	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
- 	  It is needed for low-speed USB 1.0 device support.
- 
-+config USB_OHCI_HCD_PLATFORM
-+	bool "OHCI driver for a platform device"
-+	depends on USB_OHCI_HCD && EXPERIMENTAL
-+	default n
-+	---help---
-+	  Adds an OHCI host driver for a generic platform device, which
-+	  provieds a memory space and an irq.
-+
-+	  If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- 	bool
- 	depends on USB_OHCI_HCD
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1111,6 +1111,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
-+#include "ohci-platform.c"
-+#define PLATFORM_OHCI_DRIVER	ohci_platform_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
-@@ -1120,7 +1125,8 @@ MODULE_LICENSE ("GPL");
- 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
- 	!defined(SM501_OHCI_DRIVER) && \
- 	!defined(TMIO_OHCI_DRIVER) && \
--	!defined(SSB_OHCI_DRIVER)
-+	!defined(SSB_OHCI_DRIVER) && \
-+	!defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
- 
-@@ -1204,9 +1210,19 @@ static int __init ohci_hcd_mod_init(void
- 		goto error_tmio;
- #endif
- 
-+#ifdef PLATFORM_OHCI_DRIVER
-+	retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
-+	if (retval)
-+		goto error_platform;
-+#endif
-+
- 	return retval;
- 
- 	/* Error path */
-+#ifdef PLATFORM_OHCI_DRIVER
-+	platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+ error_platform:
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- 	platform_driver_unregister(&TMIO_OHCI_DRIVER);
-  error_tmio:
-@@ -1260,6 +1276,9 @@ module_init(ohci_hcd_mod_init);
- 
- static void __exit ohci_hcd_mod_exit(void)
- {
-+#ifdef PLATFORM_OHCI_DRIVER
-+	platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- 	platform_driver_unregister(&TMIO_OHCI_DRIVER);
- #endif
---- /dev/null
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -0,0 +1,197 @@
-+/*
-+ * Generic platform ohci driver
-+ *
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ohci_platform_reset(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+	int err;
-+
-+	ohci_hcd_init(ohci);
-+	err = ohci_init(ohci);
-+
-+	return err;
-+}
-+
-+static int ohci_platform_start(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+	int err;
-+
-+	err = ohci_run(ohci);
-+	if (err < 0) {
-+		ohci_err(ohci, "can't start\n");
-+		ohci_stop(hcd);
-+	}
-+
-+	return err;
-+}
-+
-+static const struct hc_driver ohci_platform_hc_driver = {
-+	.description		= "platform-usb-ohci",
-+	.product_desc		= "Generic Platform OHCI Controller",
-+	.hcd_priv_size		= sizeof(struct ohci_hcd),
-+
-+	.irq			= ohci_irq,
-+	.flags			= HCD_MEMORY | HCD_USB11,
-+
-+	.reset			= ohci_platform_reset,
-+	.start			= ohci_platform_start,
-+	.stop			= ohci_stop,
-+	.shutdown		= ohci_shutdown,
-+
-+	.urb_enqueue		= ohci_urb_enqueue,
-+	.urb_dequeue		= ohci_urb_dequeue,
-+	.endpoint_disable	= ohci_endpoint_disable,
-+
-+	.get_frame_number	= ohci_get_frame,
-+
-+	.hub_status_data	= ohci_hub_status_data,
-+	.hub_control		= ohci_hub_control,
-+#ifdef	CONFIG_PM
-+	.bus_suspend		= ohci_bus_suspend,
-+	.bus_resume		= ohci_bus_resume,
-+#endif
-+
-+	.start_port_reset	= ohci_start_port_reset,
-+};
-+
-+static int ohci_platform_attach(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+	struct resource *res_irq, *res_mem;
-+	int err = -ENOMEM;
-+
-+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-+			dev_name(&dev->dev));
-+	if (!hcd)
-+		goto err_return;
-+
-+	res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+	if (!res_irq) {
-+		err = -ENXIO;
-+		goto err_return;
-+	}
-+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+	if (!res_mem) {
-+		err = -ENXIO;
-+		goto err_return;
-+	}
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs)
-+		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+	if (err)
-+		goto err_iounmap;
-+
-+	platform_set_drvdata(dev, hcd);
-+
-+	return err;
-+
-+err_iounmap:
-+	iounmap(hcd->regs);
-+err_put_hcd:
-+	usb_put_hcd(hcd);
-+err_return:
-+	return err;
-+}
-+
-+static int ohci_platform_probe(struct platform_device *dev)
-+{
-+	int err;
-+
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	/* We currently always attach BCMA_DEV_USB11_HOSTDEV
-+	 * as HOST OHCI. If we want to attach it as Client device,
-+	 * we must branch here and call into the (yet to
-+	 * be written) Client mode driver. Same for remove(). */
-+
-+	err = ohci_platform_attach(dev);
-+
-+	return err;
-+}
-+
-+static int ohci_platform_remove(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(dev);
-+	if (!hcd)
-+		return -ENODEV;
-+
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	usb_put_hcd(hcd);
-+
-+	return 0;
-+}
-+
-+static void ohci_platform_shutdown(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(dev);
-+	if (!hcd)
-+		return;
-+
-+	if (hcd->driver->shutdown)
-+		hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ohci_platform_suspend(struct platform_device *dev,
-+				 pm_message_t state)
-+{
-+
-+	return 0;
-+}
-+
-+static int ohci_platform_resume(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+	ohci_finish_controller_resume(hcd);
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ohci_platform_suspend	NULL
-+#define ohci_platform_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ohci_platform_table[] = {
-+	{ "ohci-platform", 0 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(platform, ohci_platform_table);
-+
-+static struct platform_driver ohci_platform_driver = {
-+	.id_table	= ohci_platform_table,
-+	.probe		= ohci_platform_probe,
-+	.remove		= ohci_platform_remove,
-+	.shutdown	= ohci_platform_shutdown,
-+	.suspend	= ohci_platform_suspend,
-+	.resume		= ohci_platform_resume,
-+	.driver		= {
-+		.name	= "ohci-platform",
-+	}
-+};
diff --git a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
deleted file mode 100644
index 43cf86a2b1..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From aa05e0048cec25719921291e8749674b8cc66fc0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:28:56 +0100
-Subject: [PATCH 18/21] USB: EHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their EHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig         |   10 ++
- drivers/usb/host/ehci-hcd.c      |    5 +
- drivers/usb/host/ehci-platform.c |  211 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 226 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
- 
- 	  If unsure, say N.
- 
-+config USB_EHCI_HCD_PLATFORM
-+	bool "Generic EHCI driver for a platform device"
-+	depends on USB_EHCI_HCD && EXPERIMENTAL
-+	default n
-+	---help---
-+	  Adds an EHCI host driver for a generic platform device, which
-+	  provieds a memory space and an irq.
-+
-+	  If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- 	bool
- 	depends on USB_OHCI_HCD
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1312,6 +1312,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ehci_grlib_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
-+#include "ehci-platform.c"
-+#define PLATFORM_DRIVER		ehci_platform_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
---- /dev/null
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -0,0 +1,211 @@
-+/*
-+ * Generic platform ehci driver
-+ *
-+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
-+ * Copyright 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the ohci-ssb driver
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the EHCI-PCI driver
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * Derived from the ohci-pci driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ehci_platform_reset(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int retval;
-+
-+	ehci->caps = hcd->regs;
-+	ehci->regs = hcd->regs +
-+		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+	dbg_hcs_params(ehci, "reset");
-+	dbg_hcc_params(ehci, "reset");
-+
-+	/* cache this readonly data; minimize chip reads */
-+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+	retval = ehci_halt(ehci);
-+	if (retval)
-+		return retval;
-+
-+	/* data structure init */
-+	retval = ehci_init(hcd);
-+	if (retval)
-+		return retval;
-+
-+	ehci_reset(ehci);
-+
-+	ehci_port_power(ehci, 1);
-+
-+	return retval;
-+}
-+
-+static const struct hc_driver ehci_platform_hc_driver = {
-+	.description		= "platform-usb-ehci",
-+	.product_desc		= "Generic Platform EHCI Controller",
-+	.hcd_priv_size		= sizeof(struct ehci_hcd),
-+
-+	.irq			= ehci_irq,
-+	.flags			= HCD_MEMORY | HCD_USB2,
-+
-+	.reset			= ehci_platform_reset,
-+	.start			= ehci_run,
-+	.stop			= ehci_stop,
-+	.shutdown		= ehci_shutdown,
-+
-+	.urb_enqueue		= ehci_urb_enqueue,
-+	.urb_dequeue		= ehci_urb_dequeue,
-+	.endpoint_disable	= ehci_endpoint_disable,
-+	.endpoint_reset		= ehci_endpoint_reset,
-+
-+	.get_frame_number	= ehci_get_frame,
-+
-+	.hub_status_data	= ehci_hub_status_data,
-+	.hub_control		= ehci_hub_control,
-+#if defined(CONFIG_PM)
-+	.bus_suspend		= ehci_bus_suspend,
-+	.bus_resume		= ehci_bus_resume,
-+#endif
-+	.relinquish_port	= ehci_relinquish_port,
-+	.port_handed_over	= ehci_port_handed_over,
-+
-+	.update_device		= ehci_update_device,
-+
-+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-+};
-+
-+static int ehci_platform_attach(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+	struct resource *res_irq, *res_mem;
-+	int err = -ENOMEM;
-+
-+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-+			     dev_name(&dev->dev));
-+	if (!hcd)
-+		goto err_return;
-+
-+	res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+	if (!res_irq) {
-+		err = -ENXIO;
-+		goto err_return;
-+	}
-+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+	if (!res_mem) {
-+		err = -ENXIO;
-+		goto err_return;
-+	}
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	/*
-+	 * start & size modified per sbutils.c
-+	 */
-+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs)
-+		goto err_put_hcd;
-+	err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+	if (err)
-+		goto err_iounmap;
-+
-+	platform_set_drvdata(dev, hcd);
-+
-+	return err;
-+
-+err_iounmap:
-+	iounmap(hcd->regs);
-+err_put_hcd:
-+	usb_put_hcd(hcd);
-+err_return:
-+	return err;
-+}
-+
-+static int ehci_platform_probe(struct platform_device *dev)
-+{
-+	int err;
-+
-+	if (usb_disabled())
-+		return -ENODEV;
-+
-+	err = ehci_platform_attach(dev);
-+
-+	return err;
-+}
-+
-+static int ehci_platform_remove(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(dev);
-+	if (!hcd)
-+		return -ENODEV;
-+
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	usb_put_hcd(hcd);
-+
-+	return 0;
-+}
-+
-+static void ehci_platform_shutdown(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(dev);
-+	if (!hcd)
-+		return;
-+
-+	if (hcd->driver->shutdown)
-+		hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ehci_platform_suspend(struct platform_device *dev,
-+				 pm_message_t state)
-+{
-+	return 0;
-+}
-+
-+static int ehci_platform_resume(struct platform_device *dev)
-+{
-+	struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+	ehci_finish_controller_resume(hcd);
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ehci_platform_suspend	NULL
-+#define ehci_platform_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ehci_platform_table[] = {
-+	{ "ehci-platform", 0 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(platform, ehci_platform_table);
-+
-+static struct platform_driver ehci_platform_driver = {
-+	.id_table	= ehci_platform_table,
-+	.probe		= ehci_platform_probe,
-+	.remove		= ehci_platform_remove,
-+	.shutdown	= ehci_platform_shutdown,
-+	.suspend	= ehci_platform_suspend,
-+	.resume		= ehci_platform_resume,
-+	.driver		= {
-+		.name	= "ehci-platform",
-+	}
-+};
diff --git a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
deleted file mode 100644
index e2a2f1e474..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
+++ /dev/null
@@ -1,358 +0,0 @@
-From 4ea647c5a257d57eaf230f783e54b2c0232852b8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:33:41 +0100
-Subject: [PATCH 19/26] USB: Add driver for the bcma bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom bcma bus. The bcma bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the bcma bus at the same time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig    |   12 ++
- drivers/usb/host/Makefile   |    1 +
- drivers/usb/host/bcma-hcd.c |  309 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 322 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/bcma-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -598,3 +598,15 @@ config USB_OCTEON_OHCI
- config USB_OCTEON2_COMMON
- 	bool
- 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
-+
-+config USB_HCD_BCMA
-+	tristate "BCMA usb host driver"
-+	depends on BCMA && EXPERIMENTAL
-+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+	help
-+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+	  It converts the bcma driver into two platform device drivers
-+	  for ehci and ohci.
-+
-+	  If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -35,3 +35,4 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
- obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
- obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-+obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -0,0 +1,309 @@
-+/*
-+ * Broadcom specific Advanced Microcontroller Bus
-+ * Broadcom USB-core driver (BCMA bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/bcma/bcma.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
-+MODULE_LICENSE("GPL");
-+
-+struct bcma_hcd_device {
-+	struct platform_device *ehci_dev;
-+	struct platform_device *ohci_dev;
-+};
-+
-+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
-+{
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
-+	/* Work around for 4716 failures. */
-+	if (dev->bus->chipinfo.id == 0x4716) {
-+		u32 tmp;
-+
-+		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
-+		if (tmp >= 480000000)
-+			tmp = 0x1846b; /* set CDR to 0x11(fast) */
-+		else if (tmp == 453000000)
-+			tmp = 0x1046b; /* set CDR to 0x10(slow) */
-+		else
-+			tmp = 0;
-+
-+		/* Change Shim mdio control reg to fix host not acking at
-+		 * high frequencies
-+		 */
-+		if (tmp) {
-+			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
-+			udelay(500);
-+
-+			bcma_write32(dev, 0x524, tmp);
-+			udelay(500);
-+			bcma_write32(dev, 0x524, 0x4ab);
-+			udelay(500);
-+			bcma_read32(dev, 0x528);
-+			bcma_write32(dev, 0x528, 0x80000000);
-+		}
-+	}
-+#endif /* CONFIG_BCMA_DRIVER_MIPS */
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
-+{
-+	u32 tmp;
-+
-+	/*
-+	 * USB 2.0 special considerations:
-+	 *
-+	 * 1. Since the core supports both OHCI and EHCI functions, it must
-+	 *    only be reset once.
-+	 *
-+	 * 2. In addition to the standard SI reset sequence, the Host Control
-+	 *    Register must be programmed to bring the USB core and various
-+	 *    phy components out of reset.
-+	 */
-+	if (!bcma_core_is_enabled(dev)) {
-+		bcma_core_enable(dev, 0);
-+		mdelay(10);
-+		if (dev->id.rev >= 5) {
-+			/* Enable Misc PLL */
-+			tmp = bcma_read32(dev, 0x1e0);
-+			tmp |= 0x100;
-+			bcma_write32(dev, 0x1e0, tmp);
-+			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 1))
-+				printk(KERN_EMERG "Failed to enable misc PPL!\n");
-+
-+			/* Take out of resets */
-+			bcma_write32(dev, 0x200, 0x4ff);
-+			udelay(25);
-+			bcma_write32(dev, 0x200, 0x6ff);
-+			udelay(25);
-+
-+			/* Make sure digital and AFE are locked in USB PHY */
-+			bcma_write32(dev, 0x524, 0x6b);
-+			udelay(50);
-+			tmp = bcma_read32(dev, 0x524);
-+			udelay(50);
-+			bcma_write32(dev, 0x524, 0xab);
-+			udelay(50);
-+			tmp = bcma_read32(dev, 0x524);
-+			udelay(50);
-+			bcma_write32(dev, 0x524, 0x2b);
-+			udelay(50);
-+			tmp = bcma_read32(dev, 0x524);
-+			udelay(50);
-+			bcma_write32(dev, 0x524, 0x10ab);
-+			udelay(50);
-+			tmp = bcma_read32(dev, 0x524);
-+
-+			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1)) {
-+				tmp = bcma_read32(dev, 0x528);
-+				printk(KERN_EMERG
-+				       "USB20H mdio_rddata 0x%08x\n", tmp);
-+			}
-+			bcma_write32(dev, 0x528, 0x80000000);
-+			tmp = bcma_read32(dev, 0x314);
-+			udelay(265);
-+			bcma_write32(dev, 0x200, 0x7ff);
-+			udelay(10);
-+
-+			/* Take USB and HSIC out of non-driving modes */
-+			bcma_write32(dev, 0x510, 0);
-+		} else {
-+			bcma_write32(dev, 0x200, 0x7ff);
-+
-+			udelay(1);
-+		}
-+
-+		bcma_hcd_4716wa(dev);
-+	}
-+}
-+
-+static struct platform_device * __devinit
-+bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
-+{
-+	struct platform_device *hci_dev;
-+	struct resource hci_res[2];
-+	int ret = -ENOMEM;
-+
-+	memset(hci_res, 0, sizeof(hci_res));
-+
-+	hci_res[0].start = addr;
-+	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
-+	hci_res[0].flags = IORESOURCE_MEM;
-+
-+	hci_res[1].start = dev->irq;
-+	hci_res[1].flags = IORESOURCE_IRQ;
-+
-+	hci_dev = platform_device_alloc(name, 0);
-+	if (!hci_dev)
-+		goto err_alloc;
-+
-+	hci_dev->dev.parent = &dev->dev;
-+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+	ret = platform_device_add_resources(hci_dev, hci_res,
-+					    ARRAY_SIZE(hci_res));
-+	if (ret)
-+		goto err_alloc;
-+
-+	ret = platform_device_add(hci_dev);
-+	if (ret) {
-+err_alloc:
-+		platform_device_put(hci_dev);
-+		return ERR_PTR(ret);
-+	}
-+
-+	return hci_dev;
-+}
-+
-+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
-+{
-+	int err;
-+	u16 chipid_top;
-+	u32 ohci_addr;
-+	struct bcma_hcd_device *usb_dev;
-+	struct bcma_chipinfo *chipinfo;
-+
-+	chipinfo = &dev->bus->chipinfo;
-+	/* USBcores are only connected on embedded devices. */
-+	chipid_top = (chipinfo->id & 0xFF00);
-+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+		return -ENODEV;
-+
-+	/* TODO: Probably need checks here; is the core connected? */
-+
-+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
-+
-+	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
-+	if (!usb_dev)
-+		return -ENOMEM;
-+
-+	bcma_hcd_init_chip(dev);
-+
-+	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
-+	ohci_addr = dev->addr1;
-+	if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
-+	    && chipinfo->rev == 0)
-+		ohci_addr = 0x18009000;
-+
-+	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
-+						 ohci_addr);
-+	if (IS_ERR(usb_dev->ohci_dev)) {
-+		err = PTR_ERR(usb_dev->ohci_dev);
-+		goto err_free_usb_dev;
-+	}
-+
-+	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
-+						 dev->addr);
-+	if (IS_ERR(usb_dev->ehci_dev)) {
-+		err = PTR_ERR(usb_dev->ehci_dev);
-+		goto err_unregister_ohci_dev;
-+	}
-+
-+	bcma_set_drvdata(dev, usb_dev);
-+	return 0;
-+
-+err_unregister_ohci_dev:
-+	platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+	kfree(usb_dev);
-+	return err;
-+}
-+
-+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
-+{
-+	struct bcma_hcd_device *usb_dev;
-+	struct platform_device *ohci_dev;
-+	struct platform_device *ehci_dev;
-+
-+	usb_dev = bcma_get_drvdata(dev);
-+	if (!usb_dev)
-+		return;
-+
-+	ohci_dev = usb_dev->ohci_dev;
-+	ehci_dev = usb_dev->ehci_dev;
-+
-+	if (ohci_dev) {
-+		platform_device_unregister(ohci_dev);
-+	}
-+	if (ehci_dev) {
-+		platform_device_unregister(ehci_dev);
-+	}
-+
-+	bcma_core_disable(dev, 0);
-+}
-+
-+static void bcma_hcd_shutdown(struct bcma_device *dev)
-+{
-+	bcma_core_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
-+{
-+	bcma_core_disable(dev, 0);
-+
-+	return 0;
-+}
-+
-+static int bcma_hcd_resume(struct bcma_device *dev)
-+{
-+	bcma_core_enable(dev, 0);
-+
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define bcma_hcd_suspend	NULL
-+#define bcma_hcd_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
-+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+	BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
-+
-+static struct bcma_driver bcma_hcd_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= bcma_hcd_table,
-+	.probe		= bcma_hcd_probe,
-+	.remove		= __devexit_p(bcma_hcd_remove),
-+	.shutdown	= bcma_hcd_shutdown,
-+	.suspend	= bcma_hcd_suspend,
-+	.resume		= bcma_hcd_resume,
-+};
-+
-+static int __init bcma_hcd_init(void)
-+{
-+	return bcma_driver_register(&bcma_hcd_driver);
-+}
-+module_init(bcma_hcd_init);
-+
-+static void __exit bcma_hcd_exit(void)
-+{
-+	bcma_driver_unregister(&bcma_hcd_driver);
-+}
-+module_exit(bcma_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch b/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
deleted file mode 100644
index 91b6c9cbca..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
+++ /dev/null
@@ -1,325 +0,0 @@
-From 0f91c21de577d2d9f1fd164ca686d9a4ff0e2c8b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:35:17 +0100
-Subject: [PATCH 20/26] USB: Add driver for the ssb bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom ssb bus. The ssb bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the ssb bus at the same time.
-
-The old ssb OHCI USB driver will be removed in the next step as this
-driver also provide an OHCI driver and an EHCI for the cores supporting
-it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig   |   12 ++
- drivers/usb/host/Makefile  |    1 +
- drivers/usb/host/ssb-hcd.c |  272 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 285 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ssb-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -610,3 +610,15 @@ config USB_HCD_BCMA
- 	  for ehci and ohci.
- 
- 	  If unsure, say N.
-+
-+config USB_HCD_SSB
-+	tristate "SSB usb host driver"
-+	depends on SSB && EXPERIMENTAL
-+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+	help
-+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+	  It converts the bcma driver into two platform device drivers
-+	  for ehci and ohci.
-+
-+	  If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd
- obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
- obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
-+obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/ssb-hcd.c
-@@ -0,0 +1,272 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core driver  (SSB bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
-+MODULE_LICENSE("GPL");
-+
-+#define SSB_HCD_TMSLOW_HOSTMODE	(1 << 29)
-+
-+struct ssb_hcd_device {
-+	struct platform_device *ehci_dev;
-+	struct platform_device *ohci_dev;
-+
-+	u32 enable_flags;
-+};
-+
-+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
-+{
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+	/* Work around for 5354 failures */
-+	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+		/* Change syn01 reg */
-+		ssb_write32(dev, 0x894, 0x00fe00fe);
-+
-+		/* Change syn03 reg */
-+		ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
-+	}
-+#endif
-+}
-+
-+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
-+{
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		/*
-+		 * USB 2.0 special considerations:
-+		 *
-+		 * In addition to the standard SSB reset sequence, the Host
-+		 * Control Register must be programmed to bring the USB core
-+		 * and various phy components out of reset.
-+		 */
-+		ssb_write32(dev, 0x200, 0x7ff);
-+
-+		/* Change Flush control reg */
-+		ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
-+		ssb_read32(dev, 0x400);
-+
-+		/* Change Shim control reg */
-+		ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
-+		ssb_read32(dev, 0x304);
-+
-+		udelay(1);
-+
-+		ssb_hcd_5354wa(dev);
-+	}
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
-+{
-+	u32 flags = 0;
-+
-+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+		/* Put the device into host-mode. */
-+		flags |= SSB_HCD_TMSLOW_HOSTMODE;
-+
-+	ssb_device_enable(dev, flags);
-+
-+	ssb_hcd_usb20wa(dev);
-+
-+	return flags;
-+}
-+
-+static struct platform_device * __devinit
-+ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len)
-+{
-+	struct platform_device *hci_dev;
-+	struct resource hci_res[2];
-+	int ret = -ENOMEM;
-+
-+	memset(hci_res, 0, sizeof(hci_res));
-+
-+	hci_res[0].start = addr;
-+	hci_res[0].end = hci_res[0].start + len - 1;
-+	hci_res[0].flags = IORESOURCE_MEM;
-+
-+	hci_res[1].start = dev->irq;
-+	hci_res[1].flags = IORESOURCE_IRQ;
-+
-+	hci_dev = platform_device_alloc(name, 0);
-+	if (!hci_dev)
-+		goto err_alloc;
-+
-+	hci_dev->dev.parent = dev->dev;
-+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+	ret = platform_device_add_resources(hci_dev, hci_res, 2);
-+	if (ret)
-+		goto err_alloc;
-+
-+	ret = platform_device_add(hci_dev);
-+	if (ret) {
-+err_alloc:
-+		platform_device_put(hci_dev);
-+		return ERR_PTR(ret);
-+	}
-+
-+	return hci_dev;
-+}
-+
-+static int __devinit ssb_hcd_probe(struct ssb_device *dev,
-+				   const struct ssb_device_id *id)
-+{
-+	int err, tmp;
-+	int start, len;
-+	u16 chipid_top;
-+	struct ssb_hcd_device *usb_dev;
-+
-+	/* USBcores are only connected on embedded devices. */
-+	chipid_top = (dev->bus->chip_id & 0xFF00);
-+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+		return -ENODEV;
-+
-+	/* TODO: Probably need checks here; is the core connected? */
-+
-+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+		return -EOPNOTSUPP;
-+
-+	usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
-+	if (!usb_dev)
-+		return -ENOMEM;
-+
-+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
-+	 * as HOST OHCI. If we want to attach it as Client device,
-+	 * we must branch here and call into the (yet to
-+	 * be written) Client mode driver. Same for remove(). */
-+	usb_dev->enable_flags = ssb_hcd_init_chip(dev);
-+
-+	tmp = ssb_read32(dev, SSB_ADMATCH0);
-+
-+	start = ssb_admatch_base(tmp);
-+	len = ssb_admatch_size(tmp);
-+	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
-+						len);
-+	if (IS_ERR(usb_dev->ohci_dev)) {
-+		err = PTR_ERR(usb_dev->ohci_dev);
-+		goto err_free_usb_dev;
-+	}
-+
-+	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+		start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
-+		len = 0x100; /* ehci reg block size */
-+		usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
-+							start, len);
-+		if (IS_ERR(usb_dev->ehci_dev)) {
-+			err = PTR_ERR(usb_dev->ehci_dev);
-+			goto err_unregister_ohci_dev;
-+		}
-+	}
-+
-+	ssb_set_drvdata(dev, usb_dev);
-+	return 0;
-+
-+err_unregister_ohci_dev:
-+	platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+	kfree(usb_dev);
-+	return err;
-+}
-+
-+static void __devexit ssb_hcd_remove(struct ssb_device *dev)
-+{
-+	struct ssb_hcd_device *usb_dev;
-+	struct platform_device *ohci_dev;
-+	struct platform_device *ehci_dev;
-+
-+	usb_dev = ssb_get_drvdata(dev);
-+	if (!usb_dev)
-+		return;
-+
-+	ohci_dev = usb_dev->ohci_dev;
-+	ehci_dev = usb_dev->ehci_dev;
-+
-+	if (ohci_dev) {
-+		platform_device_unregister(ohci_dev);
-+	}
-+	if (ehci_dev) {
-+		platform_device_unregister(ehci_dev);
-+	}
-+
-+	ssb_device_disable(dev, 0);
-+}
-+
-+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
-+{
-+	ssb_device_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+	ssb_device_disable(dev, 0);
-+
-+	return 0;
-+}
-+
-+static int ssb_hcd_resume(struct ssb_device *dev)
-+{
-+	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
-+
-+	ssb_device_enable(dev, usb_dev->enable_flags);
-+
-+	return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_hcd_suspend	NULL
-+#define ssb_hcd_resume	NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-+	SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
-+
-+static struct ssb_driver ssb_hcd_driver = {
-+	.name		= KBUILD_MODNAME,
-+	.id_table	= ssb_hcd_table,
-+	.probe		= ssb_hcd_probe,
-+	.remove		= __devexit_p(ssb_hcd_remove),
-+	.shutdown	= ssb_hcd_shutdown,
-+	.suspend	= ssb_hcd_suspend,
-+	.resume		= ssb_hcd_resume,
-+};
-+
-+static int __init ssb_hcd_init(void)
-+{
-+	return ssb_driver_register(&ssb_hcd_driver);
-+}
-+module_init(ssb_hcd_init);
-+
-+static void __exit ssb_hcd_exit(void)
-+{
-+	ssb_driver_unregister(&ssb_hcd_driver);
-+}
-+module_exit(ssb_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch b/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
deleted file mode 100644
index 140088c6d5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
+++ /dev/null
@@ -1,357 +0,0 @@
-From 8483de69568d1da9c106683d35d2b79c729b56c2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:36:50 +0100
-Subject: [PATCH 21/21] USB: OHCI: remove old SSB OHCI driver
-
-This is now replaced by the new ssb USB driver, which also supports
-devices with an EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig    |   13 --
- drivers/usb/host/ohci-hcd.c |   19 ---
- drivers/usb/host/ohci-ssb.c |  260 -------------------------------------------
- 3 files changed, 0 insertions(+), 292 deletions(-)
- delete mode 100644 drivers/usb/host/ohci-ssb.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
- 	  Enables support for PCI-bus plug-in USB controller cards.
- 	  If unsure, say Y.
- 
--config USB_OHCI_HCD_SSB
--	bool "OHCI support for Broadcom SSB OHCI core"
--	depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
--	default n
--	---help---
--	  Support for the Sonics Silicon Backplane (SSB) attached
--	  Broadcom USB OHCI core.
--
--	  This device is present in some embedded devices with
--	  Broadcom based SSB bus.
--
--	  If unsure, say N.
--
- config USB_OHCI_SH
- 	bool "OHCI support for SuperH USB controller"
- 	depends on USB_OHCI_HCD && SUPERH
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
- #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
- #endif
- 
--#ifdef CONFIG_USB_OHCI_HCD_SSB
--#include "ohci-ssb.c"
--#define SSB_OHCI_DRIVER		ssb_ohci_driver
--#endif
--
- #ifdef CONFIG_MFD_SM501
- #include "ohci-sm501.c"
- #define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
-@@ -1125,7 +1120,6 @@ MODULE_LICENSE ("GPL");
- 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
- 	!defined(SM501_OHCI_DRIVER) && \
- 	!defined(TMIO_OHCI_DRIVER) && \
--	!defined(SSB_OHCI_DRIVER) && \
- 	!defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-@@ -1192,12 +1186,6 @@ static int __init ohci_hcd_mod_init(void
- 		goto error_pci;
- #endif
- 
--#ifdef SSB_OHCI_DRIVER
--	retval = ssb_driver_register(&SSB_OHCI_DRIVER);
--	if (retval)
--		goto error_ssb;
--#endif
--
- #ifdef SM501_OHCI_DRIVER
- 	retval = platform_driver_register(&SM501_OHCI_DRIVER);
- 	if (retval < 0)
-@@ -1231,10 +1219,6 @@ static int __init ohci_hcd_mod_init(void
- 	platform_driver_unregister(&SM501_OHCI_DRIVER);
-  error_sm501:
- #endif
--#ifdef SSB_OHCI_DRIVER
--	ssb_driver_unregister(&SSB_OHCI_DRIVER);
-- error_ssb:
--#endif
- #ifdef PCI_DRIVER
- 	pci_unregister_driver(&PCI_DRIVER);
-  error_pci:
-@@ -1285,9 +1269,6 @@ static void __exit ohci_hcd_mod_exit(voi
- #ifdef SM501_OHCI_DRIVER
- 	platform_driver_unregister(&SM501_OHCI_DRIVER);
- #endif
--#ifdef SSB_OHCI_DRIVER
--	ssb_driver_unregister(&SSB_OHCI_DRIVER);
--#endif
- #ifdef PCI_DRIVER
- 	pci_unregister_driver(&PCI_DRIVER);
- #endif
---- a/drivers/usb/host/ohci-ssb.c
-+++ /dev/null
-@@ -1,260 +0,0 @@
--/*
-- * Sonics Silicon Backplane
-- * Broadcom USB-core OHCI driver
-- *
-- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-- *
-- * Derived from the OHCI-PCI driver
-- * Copyright 1999 Roman Weissgaerber
-- * Copyright 2000-2002 David Brownell
-- * Copyright 1999 Linus Torvalds
-- * Copyright 1999 Gregory P. Smith
-- *
-- * Derived from the USBcore related parts of Broadcom-SB
-- * Copyright 2005 Broadcom Corporation
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-- */
--#include <linux/ssb/ssb.h>
--
--
--#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
--
--struct ssb_ohci_device {
--	struct ohci_hcd ohci; /* _must_ be at the beginning. */
--
--	u32 enable_flags;
--};
--
--static inline
--struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
--{
--	return (struct ssb_ohci_device *)(hcd->hcd_priv);
--}
--
--
--static int ssb_ohci_reset(struct usb_hcd *hcd)
--{
--	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
--	struct ohci_hcd *ohci = &ohcidev->ohci;
--	int err;
--
--	ohci_hcd_init(ohci);
--	err = ohci_init(ohci);
--
--	return err;
--}
--
--static int ssb_ohci_start(struct usb_hcd *hcd)
--{
--	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
--	struct ohci_hcd *ohci = &ohcidev->ohci;
--	int err;
--
--	err = ohci_run(ohci);
--	if (err < 0) {
--		ohci_err(ohci, "can't start\n");
--		ohci_stop(hcd);
--	}
--
--	return err;
--}
--
--static const struct hc_driver ssb_ohci_hc_driver = {
--	.description		= "ssb-usb-ohci",
--	.product_desc		= "SSB OHCI Controller",
--	.hcd_priv_size		= sizeof(struct ssb_ohci_device),
--
--	.irq			= ohci_irq,
--	.flags			= HCD_MEMORY | HCD_USB11,
--
--	.reset			= ssb_ohci_reset,
--	.start			= ssb_ohci_start,
--	.stop			= ohci_stop,
--	.shutdown		= ohci_shutdown,
--
--	.urb_enqueue		= ohci_urb_enqueue,
--	.urb_dequeue		= ohci_urb_dequeue,
--	.endpoint_disable	= ohci_endpoint_disable,
--
--	.get_frame_number	= ohci_get_frame,
--
--	.hub_status_data	= ohci_hub_status_data,
--	.hub_control		= ohci_hub_control,
--#ifdef	CONFIG_PM
--	.bus_suspend		= ohci_bus_suspend,
--	.bus_resume		= ohci_bus_resume,
--#endif
--
--	.start_port_reset	= ohci_start_port_reset,
--};
--
--static void ssb_ohci_detach(struct ssb_device *dev)
--{
--	struct usb_hcd *hcd = ssb_get_drvdata(dev);
--
--	if (hcd->driver->shutdown)
--		hcd->driver->shutdown(hcd);
--	usb_remove_hcd(hcd);
--	iounmap(hcd->regs);
--	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
--	usb_put_hcd(hcd);
--	ssb_device_disable(dev, 0);
--}
--
--static int ssb_ohci_attach(struct ssb_device *dev)
--{
--	struct ssb_ohci_device *ohcidev;
--	struct usb_hcd *hcd;
--	int err = -ENOMEM;
--	u32 tmp, flags = 0;
--
--	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
--	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
--		return -EOPNOTSUPP;
--
--	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
--		/* Put the device into host-mode. */
--		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
--		ssb_device_enable(dev, flags);
--	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
--		/*
--		 * USB 2.0 special considerations:
--		 *
--		 * In addition to the standard SSB reset sequence, the Host
--		 * Control Register must be programmed to bring the USB core
--		 * and various phy components out of reset.
--		 */
--		ssb_device_enable(dev, 0);
--		ssb_write32(dev, 0x200, 0x7ff);
--
--		/* Change Flush control reg */
--		tmp = ssb_read32(dev, 0x400);
--		tmp &= ~8;
--		ssb_write32(dev, 0x400, tmp);
--		tmp = ssb_read32(dev, 0x400);
--
--		/* Change Shim control reg */
--		tmp = ssb_read32(dev, 0x304);
--		tmp &= ~0x100;
--		ssb_write32(dev, 0x304, tmp);
--		tmp = ssb_read32(dev, 0x304);
--
--		udelay(1);
--
--		/* Work around for 5354 failures */
--		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
--			/* Change syn01 reg */
--			tmp = 0x00fe00fe;
--			ssb_write32(dev, 0x894, tmp);
--
--			/* Change syn03 reg */
--			tmp = ssb_read32(dev, 0x89c);
--			tmp |= 0x1;
--			ssb_write32(dev, 0x89c, tmp);
--		}
--	} else
--		ssb_device_enable(dev, 0);
--
--	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
--			dev_name(dev->dev));
--	if (!hcd)
--		goto err_dev_disable;
--	ohcidev = hcd_to_ssb_ohci(hcd);
--	ohcidev->enable_flags = flags;
--
--	tmp = ssb_read32(dev, SSB_ADMATCH0);
--	hcd->rsrc_start = ssb_admatch_base(tmp);
--	hcd->rsrc_len = ssb_admatch_size(tmp);
--	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
--	if (!hcd->regs)
--		goto err_put_hcd;
--	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
--	if (err)
--		goto err_iounmap;
--
--	ssb_set_drvdata(dev, hcd);
--
--	return err;
--
--err_iounmap:
--	iounmap(hcd->regs);
--err_put_hcd:
--	usb_put_hcd(hcd);
--err_dev_disable:
--	ssb_device_disable(dev, flags);
--	return err;
--}
--
--static int ssb_ohci_probe(struct ssb_device *dev,
--		const struct ssb_device_id *id)
--{
--	int err;
--	u16 chipid_top;
--
--	/* USBcores are only connected on embedded devices. */
--	chipid_top = (dev->bus->chip_id & 0xFF00);
--	if (chipid_top != 0x4700 && chipid_top != 0x5300)
--		return -ENODEV;
--
--	/* TODO: Probably need checks here; is the core connected? */
--
--	if (usb_disabled())
--		return -ENODEV;
--
--	/* We currently always attach SSB_DEV_USB11_HOSTDEV
--	 * as HOST OHCI. If we want to attach it as Client device,
--	 * we must branch here and call into the (yet to
--	 * be written) Client mode driver. Same for remove(). */
--
--	err = ssb_ohci_attach(dev);
--
--	return err;
--}
--
--static void ssb_ohci_remove(struct ssb_device *dev)
--{
--	ssb_ohci_detach(dev);
--}
--
--#ifdef CONFIG_PM
--
--static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
--{
--	ssb_device_disable(dev, 0);
--
--	return 0;
--}
--
--static int ssb_ohci_resume(struct ssb_device *dev)
--{
--	struct usb_hcd *hcd = ssb_get_drvdata(dev);
--	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
--
--	ssb_device_enable(dev, ohcidev->enable_flags);
--
--	ohci_finish_controller_resume(hcd);
--	return 0;
--}
--
--#else /* !CONFIG_PM */
--#define ssb_ohci_suspend	NULL
--#define ssb_ohci_resume	NULL
--#endif /* CONFIG_PM */
--
--static const struct ssb_device_id ssb_ohci_table[] = {
--	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
--	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
--	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
--	SSB_DEVTABLE_END
--};
--MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
--
--static struct ssb_driver ssb_ohci_driver = {
--	.name		= KBUILD_MODNAME,
--	.id_table	= ssb_ohci_table,
--	.probe		= ssb_ohci_probe,
--	.remove		= ssb_ohci_remove,
--	.suspend	= ssb_ohci_suspend,
--	.resume		= ssb_ohci_resume,
--};
diff --git a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch b/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch
deleted file mode 100644
index 0a329c00a3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 7b90e7040b9783b91a4e2baf72ac32d3a00f9f2d Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 21 Jan 2012 11:18:25 +0100
-Subject: [PATCH 31/34] ssb: fix cardbus in hostmode
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/ssb/driver_pcicore.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_
- 	u32 tmp;
- 
- 	/* We do only have one cardbus device behind the bridge. */
--	if (pc->cardbusmode && (dev >= 1))
-+	if (pc->cardbusmode && (dev > 1))
- 		goto out;
- 
- 	if (bus == 0) {
diff --git a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
deleted file mode 100644
index 0951644412..0000000000
--- a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 14:59:24 +0200
-Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
-
-Swap the first and second serial if console=ttyS1 was set.
-Set it up and register it for early serial support.
-
-This patch has been in OpenWRT for a long time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/setup.c |   39 ++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 38 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
- #include <linux/platform_device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -278,6 +280,31 @@ static int bcm47xx_get_invariants(struct
- 	return 0;
- }
- 
-+#ifdef CONFIG_SERIAL_8250
-+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
-+{
-+	int i;
-+
-+	for (i = 0; i < mcore->nr_serial_ports; i++) {
-+		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+		struct uart_port s;
-+
-+		memset(&s, 0, sizeof(s));
-+		s.line = i;
-+		s.mapbase = (unsigned int) port->regs;
-+		s.membase = port->regs;
-+		s.irq = port->irq + 2;
-+		s.uartclk = port->baud_base;
-+		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+		s.iotype = SERIAL_IO_MEM;
-+		s.regshift = port->reg_shift;
-+
-+		early_serial_setup(&s);
-+	}
-+	printk(KERN_DEBUG "Serial init done.\n");
-+}
-+#endif
-+
- static void __init bcm47xx_register_ssb(void)
- {
- 	int err;
-@@ -310,6 +337,10 @@ static void __init bcm47xx_register_ssb(
- 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
- 		}
- 	}
-+
-+#ifdef CONFIG_SERIAL_8250
-+	bcm47xx_early_serial_setup(mcore);
-+#endif
- }
- #endif
- 
diff --git a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
deleted file mode 100644
index 69d4eefa85..0000000000
--- a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 15:11:26 +0200
-Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
-
-Do not use the CFE console. It causes hangs on some devices like the
-Buffalo WHR-HP-G54.
-This was reported in https://dev.openwrt.org/ticket/4061 and
-https://forum.openwrt.org/viewtopic.php?id=17063
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig        |    1 -
- arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
- 2 files changed, 6 insertions(+), 77 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -94,7 +94,6 @@ config BCM47XX
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_LITTLE_ENDIAN
- 	select GENERIC_GPIO
--	select SYS_HAS_EARLY_PRINTK
- 	select CFE
- 	help
- 	 Support for BCM47XX based boards
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -31,96 +31,28 @@
- #include <asm/fw/cfe/cfe_api.h>
- #include <asm/fw/cfe/cfe_error.h>
- 
--static int cfe_cons_handle;
--
- const char *get_system_type(void)
- {
- 	return "Broadcom BCM47XX";
- }
- 
--void prom_putchar(char c)
--{
--	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
--		;
--}
--
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- 	uint32_t cfe_ept;
- 	uint32_t cfe_handle;
- 	uint32_t cfe_eptseal;
--	int argc = fw_arg0;
--	char **envp = (char **) fw_arg2;
--	int *prom_vec = (int *) fw_arg3;
--
--	/*
--	 * Check if a loader was used; if NOT, the 4 arguments are
--	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
--	 */
--	if (argc < 0) {
--		cfe_handle = (uint32_t)argc;
--		cfe_ept = (uint32_t)envp;
--		cfe_eptseal = (uint32_t)prom_vec;
--	} else {
--		if ((int)prom_vec < 0) {
--			/*
--			 * Old loader; all it gives us is the handle,
--			 * so use the "known" entrypoint and assume
--			 * the seal.
--			 */
--			cfe_handle = (uint32_t)prom_vec;
--			cfe_ept = 0xBFC00500;
--			cfe_eptseal = CFE_EPTSEAL;
--		} else {
--			/*
--			 * Newer loaders bundle the handle/ept/eptseal
--			 * Note: prom_vec is in the loader's useg
--			 * which is still alive in the TLB.
--			 */
--			cfe_handle = prom_vec[0];
--			cfe_ept = prom_vec[2];
--			cfe_eptseal = prom_vec[3];
--		}
--	}
-+
-+	cfe_eptseal = (uint32_t) fw_arg3;
-+	cfe_handle = (uint32_t) fw_arg0;
-+	cfe_ept = (uint32_t) fw_arg2;
- 
- 	if (cfe_eptseal != CFE_EPTSEAL) {
--		/* too early for panic to do any good */
- 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
--		while (1) ;
-+		return -1;
- 	}
- 
- 	cfe_init(cfe_handle, cfe_ept);
--}
--
--static __init void prom_init_console(void)
--{
--	/* Initialize CFE console */
--	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
--}
--
--static __init void prom_init_cmdline(void)
--{
--	static char buf[COMMAND_LINE_SIZE] __initdata;
--
--	/* Get the kernel command line from CFE */
--	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
--		buf[COMMAND_LINE_SIZE - 1] = 0;
--		strcpy(arcs_cmdline, buf);
--	}
--
--	/* Force a console handover by adding a console= argument if needed,
--	 * as CFE is not available anymore later in the boot process. */
--	if ((strstr(arcs_cmdline, "console=")) == NULL) {
--		/* Try to read the default serial port used by CFE */
--		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
--		    || (strncmp("uart", buf, 4)))
--			/* Default to uart0 */
--			strcpy(buf, "uart0");
--
--		/* Compute the new command line */
--		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
--			 arcs_cmdline, buf[4]);
--	}
-+	return 0;
- }
- 
- static __init void prom_init_mem(void)
-@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
- void __init prom_init(void)
- {
- 	prom_init_cfe();
--	prom_init_console();
--	prom_init_cmdline();
- 	prom_init_mem();
- }
- 
diff --git a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch b/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch
deleted file mode 100644
index f6d131d845..0000000000
--- a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -121,14 +121,6 @@
- #endif
- 	.endm
- 
--#ifndef CONFIG_NO_EXCEPT_FILL
--	/*
--	 * Reserved space for exception handlers.
--	 * Necessary for machines which link their kernels at KSEG0.
--	 */
--	.fill	0x400
--#endif
--
- EXPORT(_stext)
- 
- #ifdef CONFIG_BOOT_RAW
-@@ -141,6 +133,14 @@ FEXPORT(__kernel_entry)
- 	j	kernel_entry
- #endif
- 
-+#ifndef CONFIG_NO_EXCEPT_FILL
-+	/*
-+	 * Reserved space for exception handlers.
-+	 * Necessary for machines which link their kernels at KSEG0.
-+	 */
-+	.fill	0x400
-+#endif
-+
- #ifdef CONFIG_IMAGE_CMDLINE_HACK
- 	.ascii	"CMDLINE:"
- EXPORT(__image_cmdline)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -86,6 +86,7 @@ config ATH79
- 
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
-+	select BOOT_RAW
- 	select CEVT_R4K
- 	select CSRC_R4K
- 	select DMA_NONCOHERENT
diff --git a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
deleted file mode 100644
index 2bc7718c34..0000000000
--- a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -136,6 +136,10 @@ static inline int gpio_polarity(unsigned
- 	return -EINVAL;
- }
- 
-+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-+{
-+	return -ENOSYS;
-+}
- 
- /* cansleep wrappers */
- #include <asm-generic/gpio.h>
diff --git a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch
deleted file mode 100644
index 479e66f681..0000000000
--- a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch
+++ /dev/null
@@ -1,367 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
- 
-+#ifdef CONFIG_BCM47XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
-  * This macro return a properly sign-extended address suitable as base address
-  * for indexed cache operations.  Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Index_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Writeback_Inv_D, addr);
- 	__dflush_epilogue
- }
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- 	__dflush_prologue
-+	BCM4710_DUMMY_RREG();
- 	cache_op(Hit_Invalidate_D, addr);
- 	__dflush_epilogue
- }
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
-  */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Invalidate_I, addr);
- }
- 
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
-  */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+	BCM4710_DUMMY_RREG();
- 	protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
- 
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
- 		: "r" (base),						\
- 		  "i" (op));
- 
-+static inline void blast_dcache(void)
-+{
-+	unsigned long start = KSEG0;
-+	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+	unsigned long end = (start + dcache_size);
-+
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Index_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+
-+	BCM4710_FILL_TLB(start);
-+	do {
-+		BCM4710_DUMMY_RREG();
-+		cache_op(Hit_Writeback_Inv_D, start);
-+		start += current_cpu_data.dcache.linesz;
-+	} while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+	unsigned long start = page;
-+	unsigned long end = start + PAGE_SIZE;
-+	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+	unsigned long ws_end = current_cpu_data.dcache.ways <<
-+	                       current_cpu_data.dcache.waybit;
-+	unsigned long ws, addr;
-+	for (ws = 0; ws < ws_end; ws += ws_inc) {
-+		start = page + ws;
-+		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+			BCM4710_DUMMY_RREG();
-+			cache_op(Index_Writeback_Inv_D, addr);
-+		}
-+	}
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void)			\
- {									\
- 	unsigned long start = INDEX_BASE;				\
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
- 		for (addr = start; addr < end; addr += lsize * 32)	\
- 			cache##lsize##_unroll32(addr|ws, indexop);	\
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
- 									\
- 	__##pfx##flush_prologue						\
- 									\
-+	war								\
- 	do {								\
- 		cache##lsize##_unroll32(start, hitop);			\
- 		start += lsize * 32;					\
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
- 	                       current_cpu_data.desc.waybit;		\
- 	unsigned long ws, addr;						\
- 									\
-+	war								\
-+									\
- 	__##pfx##flush_prologue						\
- 									\
- 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
-@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
- 	__##pfx##flush_epilogue						\
- }
- 
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
- 
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
- 	unsigned long addr = start & ~(lsize - 1);			\
- 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	war								\
- 									\
- 	__##pfx##flush_prologue						\
- 									\
- 	while (1) {							\
-+		war2						\
- 		prot##cache_op(hitop, addr);				\
- 		if (addr == aend)					\
- 			break;						\
-@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
- 	__##pfx##flush_epilogue						\
- }
- 
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
- 
- #endif /* _ASM_R4KCACHE_H */
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -449,6 +449,10 @@
- 		.macro	RESTORE_SP_AND_RET
- 		LONG_L	sp, PT_R29(sp)
- 		.set	mips3
-+#ifdef CONFIG_BCM47XX
-+		nop
-+		nop
-+#endif
- 		eret
- 		.set	mips0
- 		.endm
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
- NESTED(except_vec3_generic, 0, sp)
- 	.set	push
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+	nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -35,6 +35,9 @@
- #include <asm/cacheflush.h> /* for run_uncached() */
- 
- 
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
-  * Special Variant of smp_call_function for use by cache functions:
-  *
-@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- 	unsigned long  dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page = blast_dcache_page;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
- {
- 	unsigned long dc_lsize = cpu_dcache_line_size();
- 
-+	if (bcm4710)
-+		r4k_blast_dcache = blast_dcache;
-+	else
- 	if (dc_lsize == 0)
- 		r4k_blast_dcache = (void *)cache_noop;
- 	else if (dc_lsize == 16)
-@@ -679,6 +691,8 @@ static void local_r4k_flush_cache_sigtra
- 	unsigned long addr = (unsigned long) arg;
- 
- 	R4600_HIT_CACHEOP_WAR_IMPL;
-+	BCM4710_PROTECTED_FILL_TLB(addr);
-+	BCM4710_PROTECTED_FILL_TLB(addr + 4);
- 	if (dc_lsize)
- 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- 	if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1309,6 +1323,17 @@ static void __cpuinit coherency_setup(vo
- 	 * silly idea of putting something else there ...
- 	 */
- 	switch (current_cpu_type()) {
-+	case CPU_BMIPS3300:
-+		{
-+			u32 cm;
-+			cm = read_c0_diag();
-+			/* Enable icache */
-+			cm |= (1 << 31);
-+			/* Enable dcache */
-+			cm |= (1 << 30);
-+			write_c0_diag(cm);
-+		}
-+		break;
- 	case CPU_R4000PC:
- 	case CPU_R4000SC:
- 	case CPU_R4000MC:
-@@ -1365,6 +1390,15 @@ void __cpuinit r4k_cache_init(void)
- 		break;
- 	}
- 
-+	/* Check if special workarounds are required */
-+#ifdef CONFIG_BCM47XX
-+	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+		printk("Enabling BCM4710A0 cache workarounds.\n");
-+		bcm4710 = 1;
-+	} else
-+#endif
-+		bcm4710 = 0;
-+
- 	probe_pcache();
- 	setup_scache();
- 
-@@ -1423,5 +1457,13 @@ void __cpuinit r4k_cache_init(void)
- #if !defined(CONFIG_MIPS_CMP)
- 	local_r4k___flush_cache_all(NULL);
- #endif
-+#ifdef CONFIG_BCM47XX
-+	{
-+		static void (*_coherency_setup)(void);
-+		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+		_coherency_setup();
-+	}
-+#else
- 	coherency_setup();
-+#endif
- }
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -1188,6 +1188,9 @@ static void __cpuinit build_r4000_tlb_re
- 			/* No need for uasm_i_nop */
- 		}
- 
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1707,6 +1710,9 @@ build_r4000_tlbchange_handler_head(u32 *
- 				   struct uasm_reloc **r, unsigned int pte,
- 				   unsigned int ptr)
- {
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
diff --git a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch
deleted file mode 100644
index 9253e915ed..0000000000
--- a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -110,6 +110,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
- 
- /*
-  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -0,0 +1,13 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
-+ */
-+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_use_kmap_coherent	0
-+
-+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
- 		 */
- 		map_coherent = (cpu_has_dc_aliases &&
- 				page_mapped(page) && !Page_dcache_dirty(page));
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			vaddr = kmap_coherent(page, addr);
- 		else
- 			vaddr = kmap_atomic(page, KM_USER0);
-@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
- 	}
- 
- 	if (vaddr) {
--		if (map_coherent)
-+		if (map_coherent && cpu_use_kmap_coherent)
- 			kunmap_coherent();
- 		else
- 			kunmap_atomic(vaddr, KM_USER0);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
- 	void *vfrom, *vto;
- 
- 	vto = kmap_atomic(to, KM_USER1);
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(from) && !Page_dcache_dirty(from)) {
- 		vfrom = kmap_coherent(from, vaddr);
- 		copy_page(vto, vfrom);
-@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(page) && !Page_dcache_dirty(page)) {
- 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(vto, src, len);
-@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
- {
--	if (cpu_has_dc_aliases &&
-+	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- 	    page_mapped(page) && !Page_dcache_dirty(page)) {
- 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- 		memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch
deleted file mode 100644
index 49f7999149..0000000000
--- a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru
- error:
- 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static inline int startswith (const char *source, const char *cmp) 
-+{ 
-+       return !strncmp(source,cmp,strlen(cmp)); 
-+}
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+	char buf[20];
-+	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+	if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
-+		return;
-+	if (simple_strtoul(buf, NULL, 0) == 100) {
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+	} else {
-+		/* WL-HDD */
-+		struct ssb_device *sdev = bp->sdev;
-+		if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
-+			return;
-+		if (startswith(buf, "WL300-")) {
-+			if (sdev->bus->sprom.et0phyaddr == 0 &&
-+			    sdev->bus->sprom.et1phyaddr == 1)
-+				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+		}
-+	}
-+	return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
- 
- static int b44_setup_phy(struct b44 *bp)
-@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp)
- 	int err;
- 
- 	b44_wap54g10_workaround(bp);
-+	b44_bcm47xx_workarounds(bp);
- 
- 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
- 		return 0;
-@@ -2089,6 +2121,8 @@ static int __devinit b44_get_invariants(
- 	 * valid PHY address. */
- 	bp->phy_addr &= 0x1F;
- 
-+	b44_bcm47xx_workarounds(bp);
-+
- 	memcpy(bp->dev->dev_addr, addr, 6);
- 
- 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch
deleted file mode 100644
index f333d71d80..0000000000
--- a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
- 		udelay(10);
- 	}
- 	if (i == timeout) {
-+#if 0
- 		if (net_ratelimit())
- 			netdev_err(bp->dev, "BUG!  Timeout waiting for bit %08x of register %lx to %s\n",
- 				   bit, reg, clear ? "clear" : "set");
--
-+#endif
- 		return -ENODEV;
- 	}
- 	return 0;
diff --git a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch
deleted file mode 100644
index 61f0a7ecad..0000000000
--- a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -317,6 +317,8 @@ void ssb_chipco_resume(struct ssb_chipco
- void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
-                              u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
-@@ -340,6 +342,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
- void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- 				 u32 *plltype, u32 *n, u32 *m)
- {
-+	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+		return;
- 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- 	switch (*plltype) {
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -241,6 +241,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
- 
- 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
- 		rate = 200000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 240000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(pll_type, n, m);
- 	}
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
- 
- 	if (bus->chip_id == 0x5365) {
- 		rate = 100000000;
-+	} else if (bus->chip_id == 0x5354) {
-+		rate = 120000000;
- 	} else {
- 		rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
- 		if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
diff --git a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index c535c05db5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
- config BCMA_HOST_SOC
- 	bool
- 	depends on BCMA_DRIVER_MIPS
-+	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- 
- config BCMA_SFLASH
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -147,6 +147,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- 	bool
- 	depends on SSB_DRIVER_MIPS
-+	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- 	default y
- 
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch
deleted file mode 100644
index 686fb1b945..0000000000
--- a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- 	unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch
deleted file mode 100644
index abfb947e55..0000000000
--- a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
- 	}
- }
- 
--static void r4k___flush_cache_all(void)
-+void r4k___flush_cache_all(void)
- {
- 	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL);
- }
-@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
- 	}
- }
- 
--static void r4k_flush_cache_page(struct vm_area_struct *vma,
-+void r4k_flush_cache_page(struct vm_area_struct *vma,
- 	unsigned long addr, unsigned long pfn)
- {
- 	struct flush_cache_page_args args;
-@@ -1467,3 +1467,7 @@ void __cpuinit r4k_cache_init(void)
- 	coherency_setup();
- #endif
- }
-+
-+/* fuse package DCACHE BUG patch exports */
-+void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
-+EXPORT_SYMBOL(fuse_flush_cache_all);
diff --git a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch b/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch
deleted file mode 100644
index 12e7251061..0000000000
--- a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/fs/fuse/dev.c
-+++ b/fs/fuse/dev.c
-@@ -651,11 +651,20 @@ static int fuse_copy_fill(struct fuse_co
- 	return lock_request(cs->fc, cs->req);
- }
- 
-+#ifdef DCACHE_BUG
-+extern void (*fuse_flush_cache_all)(void);
-+#endif
-+
- /* Do as much copy to/from userspace buffer as we can */
- static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
- {
- 	unsigned ncpy = min(*size, cs->len);
- 	if (val) {
-+#ifdef DCACHE_BUG
-+		// patch from mailing list, it is very important, otherwise,
-+		// can't mount, or ls mount point will hang
-+		fuse_flush_cache_all();
-+#endif
- 		if (cs->write)
- 			memcpy(cs->buf, *val, ncpy);
- 		else
---- a/fs/fuse/fuse_i.h
-+++ b/fs/fuse/fuse_i.h
-@@ -8,6 +8,7 @@
- 
- #ifndef _FS_FUSE_I_H
- #define _FS_FUSE_I_H
-+#define DCACHE_BUG
- 
- #include <linux/fuse.h>
- #include <linux/fs.h>
---- a/fs/fuse/inode.c
-+++ b/fs/fuse/inode.c
-@@ -1202,6 +1202,10 @@ static int __init fuse_init(void)
- 	printk(KERN_INFO "fuse init (API version %i.%i)\n",
- 	       FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
- 
-+#ifdef DCACHE_BUG
-+	printk("fuse init DCACHE_BUG workaround enabled\n");
-+#endif
-+
- 	INIT_LIST_HEAD(&fuse_conn_list);
- 	res = fuse_fs_init();
- 	if (res)
diff --git a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch
deleted file mode 100644
index 2bc05c4562..0000000000
--- a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -43,6 +43,7 @@
- #ifndef __ASSEMBLY__
- 
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- #include <asm/io.h>
- 
- extern void build_clear_page(void);
-@@ -78,13 +79,16 @@ static inline void clear_user_page(void
- 		flush_data_cache_page((unsigned long)addr);
- }
- 
--extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
--	struct page *to);
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+	struct page *to)
-+{
-+	extern void (*flush_data_cache_page)(unsigned long addr);
- 
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+	copy_page(vto, vfrom);
-+	if (!cpu_has_ic_fills_f_dc ||
-+	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+		flush_data_cache_page((unsigned long)vto);
-+}
- 
- /*
-  * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -202,30 +202,6 @@ void kunmap_coherent(void)
- 	preempt_check_resched();
- }
- 
--void copy_user_highpage(struct page *to, struct page *from,
--	unsigned long vaddr, struct vm_area_struct *vma)
--{
--	void *vfrom, *vto;
--
--	vto = kmap_atomic(to, KM_USER1);
--	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
--	    page_mapped(from) && !Page_dcache_dirty(from)) {
--		vfrom = kmap_coherent(from, vaddr);
--		copy_page(vto, vfrom);
--		kunmap_coherent();
--	} else {
--		vfrom = kmap_atomic(from, KM_USER0);
--		copy_page(vto, vfrom);
--		kunmap_atomic(vfrom, KM_USER0);
--	}
--	if ((!cpu_has_ic_fills_f_dc) ||
--	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
--		flush_data_cache_page((unsigned long)vto);
--	kunmap_atomic(vto, KM_USER1);
--	/* Make sure this page is cleared on other CPU's too before using it */
--	smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- 	struct page *page, unsigned long vaddr, void *dst, const void *src,
- 	unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
deleted file mode 100644
index 46d47e3d01..0000000000
--- a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -199,3 +199,30 @@ int nvram_getenv(char *name, char *val,
- 	return NVRAM_ERR_ENVNOTFOUND;
- }
- EXPORT_SYMBOL(nvram_getenv);
-+
-+char *nvram_get(const char *name)
-+{
-+	char *var, *value, *end, *eq;
-+
-+	if (!name)
-+		return NULL;
-+
-+	if (!nvram_buf[0])
-+		early_nvram_init();
-+
-+	/* Look for name=value and return value */
-+	var = &nvram_buf[sizeof(struct nvram_header)];
-+	end = nvram_buf + sizeof(nvram_buf) - 2;
-+	end[0] = end[1] = '\0';
-+	for (; *var; var = value + strlen(value) + 1) {
-+		eq = strchr(var, '=');
-+		if (!eq)
-+			break;
-+		value = eq + 1;
-+		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+			return value;
-+	}
-+
-+	return NULL;
-+}
-+EXPORT_SYMBOL(nvram_get);
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -468,3 +468,20 @@ static int __init bcm47xx_register_flash
- 	return -1;
- }
- fs_initcall(bcm47xx_register_flash);
-+
-+static int __init bcm47xx_register_gpiodev(void)
-+{
-+	static struct resource res = {
-+		.start = 0xFFFFFFFF,
-+	};
-+	struct platform_device *pdev;
-+
-+	pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-+	if (!pdev) {
-+		printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+device_initcall(bcm47xx_register_gpiodev);
diff --git a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch
deleted file mode 100644
index 7860ca0dd8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
- 		if ((idx == PCI_ROM_RESOURCE) &&
- 				(!(r->flags & IORESOURCE_ROM_ENABLE)))
- 			continue;
--		if (!r->start && r->end) {
--			printk(KERN_ERR "PCI: Device %s not available "
--			       "because of resource collisions\n",
-+		if (!r->start && r->end)
-+			printk(KERN_WARNING "PCI: Device %s resource"
-+			       "collisions detected. Ignoring...\n",
- 			       pci_name(dev));
--			return -EINVAL;
--		}
- 		if (r->flags & IORESOURCE_IO)
- 			cmd |= PCI_COMMAND_IO;
- 		if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch
deleted file mode 100644
index f254b203bd..0000000000
--- a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
- 	hw->io_ports.ctl_addr = ctl_addr;
- }
- 
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS	2
-+#else
- #define MAX_HWIFS	10
-+#endif
- 
- /*
-  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch
deleted file mode 100644
index d429573f2d..0000000000
--- a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch
+++ /dev/null
@@ -1,325 +0,0 @@
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -43,6 +43,7 @@
- #include <linux/prefetch.h>
- #include <linux/dma-mapping.h>
- #include <linux/firmware.h>
-+#include <linux/ssb/ssb_driver_gige.h>
- 
- #include <net/checksum.h>
- #include <net/ip.h>
-@@ -515,7 +516,8 @@ static void _tw32_flush(struct tg3 *tp,
- static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
- {
- 	tp->write32_mbox(tp, off, val);
--	if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
-+	if (tg3_flag(tp, FLUSH_POSTED_WRITES) ||
-+	    (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)))
- 		tp->read32_mbox(tp, off);
- }
- 
-@@ -525,7 +527,7 @@ static void tg3_write32_tx_mbox(struct t
- 	writel(val, mbox);
- 	if (tg3_flag(tp, TXD_MBOX_HWBUG))
- 		writel(val, mbox);
--	if (tg3_flag(tp, MBOX_WRITE_REORDER))
-+	if (tg3_flag(tp, MBOX_WRITE_REORDER) || tg3_flag(tp, FLUSH_POSTED_WRITES))
- 		readl(mbox);
- }
- 
-@@ -804,7 +806,7 @@ static void tg3_switch_clocks(struct tg3
- 
- #define PHY_BUSY_LOOPS	5000
- 
--static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
- {
- 	u32 frame_val;
- 	unsigned int loops;
-@@ -818,7 +820,7 @@ static int tg3_readphy(struct tg3 *tp, i
- 
- 	*val = 0x0;
- 
--	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- 		      MI_COM_PHY_ADDR_MASK);
- 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- 		      MI_COM_REG_ADDR_MASK);
-@@ -853,7 +855,12 @@ static int tg3_readphy(struct tg3 *tp, i
- 	return ret;
- }
- 
--static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+{
-+	return __tg3_readphy(tp, tp->phy_addr, reg, val);
-+}
-+
-+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
- {
- 	u32 frame_val;
- 	unsigned int loops;
-@@ -869,7 +876,7 @@ static int tg3_writephy(struct tg3 *tp,
- 		udelay(80);
- 	}
- 
--	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- 		      MI_COM_PHY_ADDR_MASK);
- 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- 		      MI_COM_REG_ADDR_MASK);
-@@ -902,6 +909,11 @@ static int tg3_writephy(struct tg3 *tp,
- 	return ret;
- }
- 
-+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+{
-+	return __tg3_writephy(tp, tp->phy_addr, reg, val);
-+}
-+
- static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
- {
- 	int err;
-@@ -2532,6 +2544,9 @@ static int tg3_nvram_read(struct tg3 *tp
- {
- 	int ret;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE))
-+		return -ENODEV;
-+
- 	if (!tg3_flag(tp, NVRAM))
- 		return tg3_nvram_read_using_eeprom(tp, offset, val);
- 
-@@ -2855,8 +2870,10 @@ static int tg3_power_down_prepare(struct
- 	tg3_frob_aux_power(tp);
- 
- 	/* Workaround for unstable PLL clock */
--	if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
--	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
-+	if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
-+				/* !!! FIXME !!! */
-+	    ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
-+	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
- 		u32 val = tr32(0x7d00);
- 
- 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -3377,6 +3394,14 @@ relink:
- 	if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
- 		tg3_phy_copper_begin(tp);
- 
-+		if (tg3_flag(tp, ROBOSWITCH)) {
-+			current_link_up = 1;
-+			current_speed = SPEED_1000; /* FIXME */
-+			current_duplex = DUPLEX_FULL;
-+			tp->link_config.active_speed = current_speed;
-+			tp->link_config.active_duplex = current_duplex;
-+		}
-+
- 		tg3_readphy(tp, MII_BMSR, &bmsr);
- 		if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
- 		    (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
-@@ -6962,6 +6987,11 @@ static int tg3_poll_fw(struct tg3 *tp)
- 	int i;
- 	u32 val;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- 		/* Wait up to 20ms for init done. */
- 		for (i = 0; i < 200; i++) {
-@@ -7251,6 +7281,14 @@ static int tg3_chip_reset(struct tg3 *tp
- 		tw32(0x5000, 0x400);
- 	}
- 
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* BCM4785: In order to avoid repercussions from using potentially
-+		 * defective internal ROM, stop the Rx RISC CPU, which is not
-+		 * required. */
-+		tg3_stop_fw(tp);
-+		tg3_halt_cpu(tp, RX_CPU_BASE);
-+	}
-+
- 	tw32(GRC_MODE, tp->grc_mode);
- 
- 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -7403,9 +7441,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
- 		return -ENODEV;
- 	}
- 
--	/* Clear firmware's nvram arbitration. */
--	if (tg3_flag(tp, NVRAM))
--		tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+	if (!tg3_flag(tp, IS_SSB_CORE)) {
-+		/* Clear firmware's nvram arbitration. */
-+		if (tg3_flag(tp, NVRAM))
-+			tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+	}
-+
- 	return 0;
- }
- 
-@@ -7467,6 +7508,11 @@ static int tg3_load_5701_a0_firmware_fix
- 	const __be32 *fw_data;
- 	int err, i;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	fw_data = (void *)tp->fw->data;
- 
- 	/* Firmware blob starts with version numbers, followed by
-@@ -7523,6 +7569,11 @@ static int tg3_load_tso_firmware(struct
- 	unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- 	int err, i;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* We don't use firmware. */
-+		return 0;
-+	}
-+
- 	if (tg3_flag(tp, HW_TSO_1) ||
- 	    tg3_flag(tp, HW_TSO_2) ||
- 	    tg3_flag(tp, HW_TSO_3))
-@@ -8819,6 +8870,11 @@ static void tg3_timer(unsigned long __op
- 
- 	spin_lock(&tp->lock);
- 
-+	if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
-+		/* BCM4785: Flush posted writes from GbE to host memory. */
-+		tr32(HOSTCC_MODE);
-+	}
-+
- 	if (!tg3_flag(tp, TAGGED_STATUS)) {
- 		/* All of this garbage is because when using non-tagged
- 		 * IRQ status the mailbox/status_block protocol the chip
-@@ -10446,6 +10502,11 @@ static int tg3_test_nvram(struct tg3 *tp
- 	if (tg3_flag(tp, NO_NVRAM))
- 		return 0;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* We don't have NVRAM. */
-+		return 0;
-+	}
-+
- 	if (tg3_nvram_read(tp, 0, &magic) != 0)
- 		return -EIO;
- 
-@@ -11440,7 +11501,7 @@ static int tg3_ioctl(struct net_device *
- 			return -EAGAIN;
- 
- 		spin_lock_bh(&tp->lock);
--		err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
-+		err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- 		spin_unlock_bh(&tp->lock);
- 
- 		data->val_out = mii_regval;
-@@ -11456,7 +11517,7 @@ static int tg3_ioctl(struct net_device *
- 			return -EAGAIN;
- 
- 		spin_lock_bh(&tp->lock);
--		err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
-+		err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- 		spin_unlock_bh(&tp->lock);
- 
- 		return err;
-@@ -12186,6 +12247,13 @@ static void __devinit tg3_get_5720_nvram
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-+	if (tg3_flag(tp, IS_SSB_CORE)) {
-+		/* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
-+		tg3_flag_clear(tp, NVRAM);
-+		tg3_flag_clear(tp, NVRAM_BUFFERED);
-+		return;
-+	}
-+
- 	tw32_f(GRC_EEPROM_ADDR,
- 	     (EEPROM_ADDR_FSM_RESET |
- 	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -12452,6 +12520,9 @@ static int tg3_nvram_write_block(struct
- {
- 	int ret;
- 
-+	if (tg3_flag(tp, IS_SSB_CORE))
-+		return -ENODEV;
-+
- 	if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
- 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
- 		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -13863,6 +13934,11 @@ static int __devinit tg3_get_invariants(
- 	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- 		tg3_flag_set(tp, SRAM_USE_CONFIG);
- 
-+	if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
-+		tp->write32_tx_mbox = tg3_write_flush_reg32;
-+		tp->write32_rx_mbox = tg3_write_flush_reg32;
-+	}
-+
- 	/* Get eeprom hw config before calling tg3_set_power_state().
- 	 * In particular, the TG3_FLAG_IS_NIC flag must be
- 	 * determined before calling tg3_set_power_state() so that
-@@ -14274,6 +14350,8 @@ static int __devinit tg3_get_device_addr
- 	}
- 
- 	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
-+		if (tg3_flag(tp, IS_SSB_CORE))
-+			ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
- #ifdef CONFIG_SPARC
- 		if (!tg3_get_default_macaddr_sparc(tp))
- 			return 0;
-@@ -14772,6 +14850,7 @@ static char * __devinit tg3_phy_string(s
- 	case TG3_PHY_ID_BCM5704:	return "5704";
- 	case TG3_PHY_ID_BCM5705:	return "5705";
- 	case TG3_PHY_ID_BCM5750:	return "5750";
-+	case TG3_PHY_ID_BCM5750_2:	return "5750-2";
- 	case TG3_PHY_ID_BCM5752:	return "5752";
- 	case TG3_PHY_ID_BCM5714:	return "5714";
- 	case TG3_PHY_ID_BCM5780:	return "5780";
-@@ -14961,6 +15040,13 @@ static int __devinit tg3_init_one(struct
- 		tp->msg_enable = tg3_debug;
- 	else
- 		tp->msg_enable = TG3_DEF_MSG_ENABLE;
-+	if (pdev_is_ssb_gige_core(pdev)) {
-+		tg3_flag_set(tp, IS_SSB_CORE);
-+		if (ssb_gige_must_flush_posted_writes(pdev))
-+			tg3_flag_set(tp, FLUSH_POSTED_WRITES);
-+		if (ssb_gige_have_roboswitch(pdev))
-+			tg3_flag_set(tp, ROBOSWITCH);
-+	}
- 
- 	/* The word/byte swap controls here control register access byte
- 	 * swapping.  DMA data byte swapping is controlled in the GRC_MODE
---- a/drivers/net/tg3.h
-+++ b/drivers/net/tg3.h
-@@ -2901,6 +2901,9 @@ enum TG3_FLAGS {
- 	TG3_FLAG_57765_PLUS,
- 	TG3_FLAG_APE_HAS_NCSI,
- 	TG3_FLAG_5717_PLUS,
-+	TG3_FLAG_IS_SSB_CORE,
-+	TG3_FLAG_FLUSH_POSTED_WRITES,
-+	TG3_FLAG_ROBOSWITCH,
- 
- 	/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
- 	TG3_FLAG_NUMBER_OF_FLAGS,	/* Last entry in enum TG3_FLAGS */
-@@ -3051,6 +3054,7 @@ struct tg3 {
- #define TG3_PHY_ID_BCM5704		0x60008190
- #define TG3_PHY_ID_BCM5705		0x600081a0
- #define TG3_PHY_ID_BCM5750		0x60008180
-+#define TG3_PHY_ID_BCM5750_2		0xbc050cd0
- #define TG3_PHY_ID_BCM5752		0x60008100
- #define TG3_PHY_ID_BCM5714		0x60008340
- #define TG3_PHY_ID_BCM5780		0x60008350
-@@ -3088,7 +3092,7 @@ struct tg3 {
- 	 (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
- 	 (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
- 	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
--	 (X) == TG3_PHY_ID_BCM8002)
-+	 (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2)
- 
- 	u32				phy_flags;
- #define TG3_PHYFLG_IS_LOW_POWER		0x00000001
diff --git a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
deleted file mode 100644
index 6bc34549fe..0000000000
--- a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
+++ /dev/null
@@ -1,180 +0,0 @@
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,4 +4,3 @@
- #
- 
- obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
--obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ /dev/null
-@@ -1,170 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
-- */
--
--#include <linux/platform_device.h>
--#include <linux/module.h>
--#include <linux/leds.h>
--#include <linux/mtd/physmap.h>
--#include <linux/ssb/ssb.h>
--#include <linux/interrupt.h>
--#include <linux/reboot.h>
--#include <linux/gpio.h>
--#include <asm/mach-bcm47xx/bcm47xx.h>
--
--/* GPIO definitions for the WGT634U */
--#define WGT634U_GPIO_LED	3
--#define WGT634U_GPIO_RESET	2
--#define WGT634U_GPIO_TP1	7
--#define WGT634U_GPIO_TP2	6
--#define WGT634U_GPIO_TP3	5
--#define WGT634U_GPIO_TP4	4
--#define WGT634U_GPIO_TP5	1
--
--static struct gpio_led wgt634u_leds[] = {
--	{
--		.name = "power",
--		.gpio = WGT634U_GPIO_LED,
--		.active_low = 1,
--		.default_trigger = "heartbeat",
--	},
--};
--
--static struct gpio_led_platform_data wgt634u_led_data = {
--	.num_leds =     ARRAY_SIZE(wgt634u_leds),
--	.leds =         wgt634u_leds,
--};
--
--static struct platform_device wgt634u_gpio_leds = {
--	.name =         "leds-gpio",
--	.id =           -1,
--	.dev = {
--		.platform_data = &wgt634u_led_data,
--	}
--};
--
--
--/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
--   firmware. */
--static struct mtd_partition wgt634u_partitions[] = {
--	{
--		.name       = "cfe",
--		.offset     = 0,
--		.size       = 0x60000,		/* 384k */
--		.mask_flags = MTD_WRITEABLE 	/* force read-only */
--	},
--	{
--		.name   = "config",
--		.offset = 0x60000,
--		.size   = 0x20000		/* 128k */
--	},
--	{
--		.name   = "linux",
--		.offset = 0x80000,
--		.size   = 0x140000 		/* 1280k */
--	},
--	{
--		.name   = "jffs",
--		.offset = 0x1c0000,
--		.size   = 0x620000 		/* 6272k */
--	},
--	{
--		.name   = "nvram",
--		.offset = 0x7e0000,
--		.size   = 0x20000		/* 128k */
--	},
--};
--
--static struct physmap_flash_data wgt634u_flash_data = {
--	.parts    = wgt634u_partitions,
--	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
--};
--
--static struct resource wgt634u_flash_resource = {
--	.flags = IORESOURCE_MEM,
--};
--
--static struct platform_device wgt634u_flash = {
--	.name          = "physmap-flash",
--	.id            = 0,
--	.dev           = { .platform_data = &wgt634u_flash_data, },
--	.resource      = &wgt634u_flash_resource,
--	.num_resources = 1,
--};
--
--/* Platform devices */
--static struct platform_device *wgt634u_devices[] __initdata = {
--	&wgt634u_flash,
--	&wgt634u_gpio_leds,
--};
--
--static irqreturn_t gpio_interrupt(int irq, void *ignored)
--{
--	int state;
--
--	/* Interrupts are shared, check if the current one is
--	   a GPIO interrupt. */
--	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
--				   SSB_CHIPCO_IRQ_GPIO))
--		return IRQ_NONE;
--
--	state = gpio_get_value(WGT634U_GPIO_RESET);
--
--	/* Interrupt are level triggered, revert the interrupt polarity
--	   to clear the interrupt. */
--	gpio_polarity(WGT634U_GPIO_RESET, state);
--
--	if (!state) {
--		printk(KERN_INFO "Reset button pressed");
--		ctrl_alt_del();
--	}
--
--	return IRQ_HANDLED;
--}
--
--static int __init wgt634u_init(void)
--{
--	/* There is no easy way to detect that we are running on a WGT634U
--	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
--	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
--	 */
--	u8 *et0mac;
--
--	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
--		return -ENODEV;
--
--	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
--
--	if (et0mac[0] == 0x00 &&
--	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
--	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
--		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
--
--		printk(KERN_INFO "WGT634U machine detected.\n");
--
--		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
--				 gpio_interrupt, IRQF_SHARED,
--				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
--			gpio_direction_input(WGT634U_GPIO_RESET);
--			gpio_intmask(WGT634U_GPIO_RESET, 1);
--			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
--					    SSB_CHIPCO_IRQ_GPIO,
--					    SSB_CHIPCO_IRQ_GPIO);
--		}
--
--		wgt634u_flash_data.width = mcore->pflash.buswidth;
--		wgt634u_flash_resource.start = mcore->pflash.window;
--		wgt634u_flash_resource.end = mcore->pflash.window
--					   + mcore->pflash.window_size
--					   - 1;
--		return platform_add_devices(wgt634u_devices,
--					    ARRAY_SIZE(wgt634u_devices));
--	} else
--		return -ENODEV;
--}
--
--module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index 88a40e2bc3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,305 +0,0 @@
-The Netgear wgt634u uses a different format for storing the 
-configuration. This patch is needed to read out the correct 
-configuration. The cfe_env.c file uses a different method way to read 
-out the configuration than the in kernel cfe config reader.
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
- 
--obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
-+obj-y 				+= gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o cfe_env.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/cfe_env.c
-@@ -0,0 +1,229 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
-+ * 
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#define NVRAM_SIZE       (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types.  These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ * 
-+ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
-+ * indicates the size of the length field.  
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS	0x00	/* for low bit */
-+#define ENV_LENGTH_8BITS	0x01
-+
-+#define ENV_TYPE_USER		0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END	0x00	
-+#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags 
-+ */
-+
-+#define ENV_FLG_NORMAL		0x00	/* normal read/write */
-+#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
-+#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
-+#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
-+
-+
-+/*  *********************************************************************
-+    *  _nvram_read(buffer,offset,length)
-+    *  
-+    *  Read data from the NVRAM device
-+    *  
-+    *  Input parameters: 
-+    *  	   buffer - destination buffer
-+    *  	   offset - offset of data to read
-+    *  	   length - number of bytes to read
-+    *  	   
-+    *  Return value:
-+    *  	   number of bytes read, or <0 if error occured
-+    ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+    int i;
-+    if (offset > NVRAM_SIZE)
-+	return -1; 
-+
-+    for ( i = 0; i < length; i++) {
-+	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+    }
-+    return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+	while (*dest && (cnt > 0)) {
-+	if (*dest == c) return (char *) dest;
-+	dest++;
-+	cnt--;
-+	}
-+	return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+
-+char* 
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+    int size;
-+    unsigned char *buffer;
-+    unsigned char *ptr;
-+    unsigned char *envval;
-+    unsigned int reclen;
-+    unsigned int rectype;
-+    int offset;
-+    int flg;
-+    
-+	if (!strcmp(name, "nvram_type"))
-+		return "cfe";
-+	
-+    size = NVRAM_SIZE;
-+    buffer = &_nvdata[0];
-+
-+    ptr = buffer;
-+    offset = 0;
-+
-+    /* Read the record type and length */
-+    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+	goto error;
-+    }
-+    
-+    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
-+
-+	/* Adjust pointer for TLV type */
-+	rectype = *(ptr);
-+	offset++;
-+	size--;
-+
-+	/* 
-+	 * Read the length.  It can be either 1 or 2 bytes
-+	 * depending on the code 
-+	 */
-+	if (rectype & ENV_LENGTH_8BITS) {
-+	    /* Read the record type and length - 8 bits */
-+	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+		goto error;
-+	    }
-+	    reclen = *(ptr);
-+	    size--;
-+	    offset++;
-+	}
-+	else {
-+	    /* Read the record type and length - 16 bits, MSB first */
-+	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+		goto error;
-+	    }
-+	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+	    size -= 2;
-+	    offset += 2;
-+	}
-+
-+	if (reclen > size)
-+	    break;	/* should not happen, bad NVRAM */
-+
-+	switch (rectype) {
-+	    case ENV_TLV_TYPE_ENV:
-+		/* Read the TLV data */
-+		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+		    goto error;
-+		flg = *ptr++;
-+		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+		if (envval) {
-+		    *envval++ = '\0';
-+		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0			
-+		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+		    if(!strcmp(ptr, name)){
-+			return _valuestr;
-+		    }
-+		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+			return _valuestr;
-+		}
-+		break;
-+		
-+	    default: 
-+		/* Unknown TLV type, skip it. */
-+		break;
-+	    }
-+
-+	/*
-+	 * Advance to next TLV 
-+	 */
-+		
-+	size -= (int)reclen;
-+	offset += reclen;
-+
-+	/* Read the next record type */
-+	ptr = buffer;
-+	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+	    goto error;
-+	}
-+
-+error:
-+    return NULL;
-+
-+}
-+
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -23,6 +23,8 @@
- #include <asm/mach-bcm47xx/bus.h>
- 
- static char nvram_buf[NVRAM_SPACE];
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
- 
- /* Probe for NVRAM header */
- static void early_nvram_init_pflash(void)
-@@ -59,6 +61,25 @@ static void early_nvram_init_pflash(void
- 		break;
- #endif
- 	}
-+	cfe_env = 0;
-+
-+	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+	if (lim >= 8 * 1024 * 1024) {
-+		src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+		dst = (u32 *) nvram_buf;
-+
-+		if ((*src & 0xff00ff) == 0x000001) {
-+			printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+			for (i = 0; i < 0x1ff0; i++) {
-+				if (*src == 0xFFFFFFFF)
-+					break;
-+				*dst++ = *src++;
-+			}
-+			cfe_env = 1;
-+			return;
-+		}
-+	}
- 
- 	off = FLASH_MIN;
- 	while (off <= lim) {
-@@ -181,6 +202,12 @@ int nvram_getenv(char *name, char *val,
- 	if (!nvram_buf[0])
- 		early_nvram_init();
- 
-+	if (cfe_env) {
-+		value = cfe_env_get(nvram_buf, name);
-+		snprintf(val, val_len, "%s", value);
-+		return 0;
-+	}
-+
- 	/* Look for name=value and return value */
- 	var = &nvram_buf[sizeof(struct nvram_header)];
- 	end = nvram_buf + sizeof(nvram_buf) - 2;
-@@ -210,6 +237,9 @@ char *nvram_get(const char *name)
- 	if (!nvram_buf[0])
- 		early_nvram_init();
- 
-+	if (cfe_env)
-+		return cfe_env_get(nvram_buf, name);
-+
- 	/* Look for name=value and return value */
- 	var = &nvram_buf[sizeof(struct nvram_header)];
- 	end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch b/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch
deleted file mode 100644
index faa9380fad..0000000000
--- a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-commit 812bcf8f47b45a206948008144233bc47d5747ac
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date:   Thu Dec 16 20:01:17 2010 +0100
-
-    Revert "tg3: Remove 5720, 5750, and 5750M"
-    
-    This reverts commit 67b284d476bcb3d100e946da23d6cf9acfd0465c.
-
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -235,9 +235,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
-+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
-+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
-+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
- 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)},
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -2077,6 +2077,7 @@
- #define PCI_DEVICE_ID_NX2_57711E	0x1650
- #define PCI_DEVICE_ID_TIGON3_5705	0x1653
- #define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
-+#define PCI_DEVICE_ID_TIGON3_5720	0x1658
- #define PCI_DEVICE_ID_TIGON3_5721	0x1659
- #define PCI_DEVICE_ID_TIGON3_5722	0x165a
- #define PCI_DEVICE_ID_TIGON3_5723	0x165b
-@@ -2092,11 +2093,13 @@
- #define PCI_DEVICE_ID_TIGON3_5754M	0x1672
- #define PCI_DEVICE_ID_TIGON3_5755M	0x1673
- #define PCI_DEVICE_ID_TIGON3_5756	0x1674
-+#define PCI_DEVICE_ID_TIGON3_5750	0x1676
- #define PCI_DEVICE_ID_TIGON3_5751	0x1677
- #define PCI_DEVICE_ID_TIGON3_5715	0x1678
- #define PCI_DEVICE_ID_TIGON3_5715S	0x1679
- #define PCI_DEVICE_ID_TIGON3_5754	0x167a
- #define PCI_DEVICE_ID_TIGON3_5755	0x167b
-+#define PCI_DEVICE_ID_TIGON3_5750M	0x167c
- #define PCI_DEVICE_ID_TIGON3_5751M	0x167d
- #define PCI_DEVICE_ID_TIGON3_5751F	0x167e
- #define PCI_DEVICE_ID_TIGON3_5787F	0x167f
diff --git a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
deleted file mode 100644
index d60247e91a..0000000000
--- a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -31,6 +31,7 @@
- 
- #define WDT_DEFAULT_TIME	30	/* seconds */
- #define WDT_MAX_TIME		255	/* seconds */
-+#define WDT_SHIFT		15	/* 32.768 KHz on cores with slow WDT clock */
- 
- static int wdt_time = WDT_DEFAULT_TIME;
- static int nowayout = WATCHDOG_NOWAYOUT;
-@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
- static char expect_release;
- static struct timer_list wdt_timer;
- static atomic_t ticks;
-+static int needs_sw_scale;
- 
--static inline void bcm47xx_wdt_hw_start(void)
-+static inline void bcm47xx_wdt_hw_start(u32 ticks)
- {
--	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
- 	switch (bcm47xx_bus_type) {
- #ifdef CONFIG_BCM47XX_SSB
- 	case BCM47XX_BUS_TYPE_SSB:
--		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
-+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
- 		break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
- 	case BCM47XX_BUS_TYPE_BCMA:
- 		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
--					       0xfffffff);
-+					       ticks);
- 		break;
- #endif
- 	}
-@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
- static void bcm47xx_timer_tick(unsigned long unused)
- {
- 	if (!atomic_dec_and_test(&ticks)) {
--		bcm47xx_wdt_hw_start();
-+		/* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-+		bcm47xx_wdt_hw_start(0xfffffff);
- 		mod_timer(&wdt_timer, jiffies + HZ);
- 	} else {
--		printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
-+		printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
- 	}
- }
- 
--static inline void bcm47xx_wdt_pet(void)
-+static void bcm47xx_wdt_pet(void)
- {
--	atomic_set(&ticks, wdt_time);
-+	if(needs_sw_scale)
-+		atomic_set(&ticks, wdt_time);
-+	else
-+		bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
- }
- 
- static void bcm47xx_wdt_start(void)
- {
- 	bcm47xx_wdt_pet();
--	bcm47xx_timer_tick(0);
--}
--
--static void bcm47xx_wdt_pause(void)
--{
--	del_timer_sync(&wdt_timer);
--	bcm47xx_wdt_hw_stop();
-+	if(needs_sw_scale)
-+		bcm47xx_timer_tick(0);
- }
- 
- static void bcm47xx_wdt_stop(void)
- {
--	bcm47xx_wdt_pause();
-+	if(needs_sw_scale)
-+		del_timer_sync(&wdt_timer);
-+	bcm47xx_wdt_hw_stop();
- }
- 
- static int bcm47xx_wdt_settimeout(int new_time)
-@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
- 	if (bcm47xx_wdt_hw_stop() < 0)
- 		return -ENODEV;
- 
--	setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+	/* FIXME Other cores */
-+#ifdef BCM47XX_BUS_TYPE_BCMA
-+	if(bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
-+	   bcm47xx_bus.ssb.chip_id == 0x5354) {
-+		/* Slow WDT clock, no pre-scaling */
-+		needs_sw_scale = 0;
-+	} else {
-+#endif
-+		/* Fast WDT clock, needs software pre-scaling */
-+		needs_sw_scale = 1;
-+		setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+#ifdef BCM47XX_BUS_TYPE_BCMA
-+	}
-+#endif
- 
- 	if (bcm47xx_wdt_settimeout(wdt_time)) {
- 		bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
diff --git a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch
deleted file mode 100644
index 5d96b0b191..0000000000
--- a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch
+++ /dev/null
@@ -1,138 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -20,10 +20,28 @@
- #ifdef CONFIG_BCM47XX
- #include <asm/paccess.h>
- #include <linux/ssb/ssb.h>
--#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+      return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+      unsigned long x;
-+      get_dbe(x, (unsigned long *)addr);;
-+}
- 
--#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
--#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
- #else
- #define BCM4710_DUMMY_RREG()
- 
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -835,6 +835,9 @@ build_get_pgde32(u32 **p, unsigned int t
- #endif
- 	uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1188,12 +1191,12 @@ static void __cpuinit build_r4000_tlb_re
- 			/* No need for uasm_i_nop */
- 		}
- 
--#ifdef CONFIG_BCM47XX
--		uasm_i_nop(&p);
--#endif
- #ifdef CONFIG_64BIT
- 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+# endif
- 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
- 
-@@ -1205,6 +1208,9 @@ static void __cpuinit build_r4000_tlb_re
- 		build_update_entries(&p, K0, K1);
- 		build_tlb_write_entry(&p, &l, &r, tlb_random);
- 		uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+		uasm_i_nop(&p);
-+#endif
- 		uasm_i_eret(&p); /* return from trap */
- 	}
- #ifdef CONFIG_HUGETLB_PAGE
-@@ -1710,12 +1716,12 @@ build_r4000_tlbchange_handler_head(u32 *
- 				   struct uasm_reloc **r, unsigned int pte,
- 				   unsigned int ptr)
- {
--#ifdef CONFIG_BCM47XX
--	uasm_i_nop(p);
--#endif
- #ifdef CONFIG_64BIT
- 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+# endif
- 	build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
- #endif
- 
-@@ -1752,6 +1758,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- 	build_update_entries(p, tmp, ptr);
- 	build_tlb_write_entry(p, l, r, tlb_indexed);
- 	uasm_l_leave(l, *p);
-+#ifdef CONFIG_BCM47XX
-+	uasm_i_nop(p);
-+#endif
- 	uasm_i_eret(p); /* return from trap */
- 
- #ifdef CONFIG_64BIT
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -22,6 +22,19 @@
- #include <asm/page.h>
- #include <asm/thread_info.h>
- 
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+#  undef eret
-+# endif
-+# define eret 					\
-+	.set push;				\
-+	.set noreorder;				\
-+	 nop; 					\
-+	 nop;					\
-+	 eret;					\
-+	.set pop;
-+#endif
-+
- #define PANIC_PIC(msg)					\
- 		.set push;				\
- 		.set	reorder;			\
-@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
- 	.set	noat
- #ifdef CONFIG_BCM47XX
- 	nop
--	nop
- #endif
- #if R5432_CP0_INTERRUPT_WAR
- 	mfc0	k0, CP0_INDEX
-@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
- 	.set	push
- 	.set	mips3
- 	.set	noat
-+#ifdef CONFIG_BCM47XX
-+	nop
-+#endif
- 	mfc0	k1, CP0_CAUSE
- 	li	k0, 31<<2
- 	andi	k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch
deleted file mode 100644
index c65958eda8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- 	 * Probe for usable interrupts using the force
- 	 * register to generate bogus card status events.
- 	 */
-+#ifndef CONFIG_BCM47XX
-+	/* WRT54G3G does not like this */
- 	cb_writel(socket, CB_SOCKET_EVENT, -1);
- 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- 	reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- 	}
- 	cb_writel(socket, CB_SOCKET_MASK, 0);
- 	exca_writeb(socket, I365_CSCINT, reg);
-+#endif
- 
- 	mask = probe_irq_mask(val) & 0xffff;
- 
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- 	else
- 		socket->socket.irq_mask = 0;
- 
-+	/* irq mask probing is broken for the WRT54G3G */
-+	if (socket->socket.irq_mask == 0)
-+		socket->socket.irq_mask = 0x6f8;
-+
- 	dev_printk(KERN_INFO, &socket->dev->dev,
- 		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
- 		   socket->socket.irq_mask, socket->cb_irq);
-@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
- 	dev_printk(KERN_INFO, &dev->dev,
- 		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
- 
-+	/* Generate an interrupt on card insert/remove */
-+	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+	/* Set up Multifunction Routing Status Register */
-+	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+	/* Switch interrupts to parallelized */
-+	config_writeb(socket, 0x92, 0x64);
-+
- 	yenta_fixup_parent_bridge(dev->subordinate);
- 
- 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index 0650c25683..0000000000
--- a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -375,7 +375,7 @@ static void __devinit ssb_pcicore_init_h
- 	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
--	mdelay(10);
-+	mdelay(300);
- 	register_pci_controller(&ssb_pcicore_controller);
- }
- 
diff --git a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
deleted file mode 100644
index 019b9932bd..0000000000
--- a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -277,6 +277,10 @@ static int bcm47xx_get_invariants(struct
- 	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
- 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
- 
-+	/* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
-+	if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
-+		iv->has_cardbus_slot = 0;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch
deleted file mode 100644
index b3aa126753..0000000000
--- a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -22,7 +22,8 @@
- #include <asm/mach-bcm47xx/bcm47xx.h>
- #include <asm/mach-bcm47xx/bus.h>
- 
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
- 
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
-