brcm47xx: migrate network config to board detection framework

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47866

3 files changed, 173 insertions, 241 deletions

diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
new file mode 100755
index 0000000000..2623b57bce
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -0,0 +1,170 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2015 OpenWrt.org
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults-new.sh
+
+detect_by_vlanports() {
+	local vlan0ports="$(nvram get vlan0ports)"
+	local vlan1ports="$(nvram get vlan1ports)"
+	local vlan2ports="$(nvram get vlan2ports)"
+	local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
+
+	if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+	else
+		logger -t "01_detect" "Unable to determine network configuration"
+		ucidef_set_interface_lan "eth0"
+	fi
+}
+
+detect_by_boardnum() {
+	local boardnum="$1"
+
+	case "$boardnum" in
+	# WAP54G, Sitecom WL-105b
+	"2" | \
+	"1024")
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	# Generic detection fallback
+	*)
+		detect_by_vlanports
+		;;
+	esac
+}
+
+detect_by_boardtype() {
+	local boardtype="$1"
+	local boardnum="$2"
+
+	case "$boardtype" in
+	"bcm94710r4")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"0x0467")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"0x042f" | \
+	"0x0472")
+		# WL-500gP
+		if [ "$boardnum" = "45" ]; then
+			ucidef_add_switch "switch0" \
+				"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+		# Generic BCM94704
+		else
+			ucidef_set_interface_wan "eth1"
+			ucidef_add_switch "switch0" \
+				"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+			# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+			local mac="$(nvram get et0macaddr)"
+			local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+
+			case "$mac" in
+			$pat)
+				ucidef_set_interface_macaddr "lan" "$mac"
+				ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
+				;;
+			esac
+		fi
+		;;
+
+	# Buffalo WBR-B11 and Buffalo WBR-G54
+	"bcm94710ap")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	*)
+		detect_by_boardnum "$boardnum"
+		;;
+	esac
+}
+
+detect_by_model() {
+	local model="$1"
+	local boardtype="$2"
+	local boardnum="$3"
+
+	# Netgear WGT634U exception
+	if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		return
+	fi
+
+	case "$model" in
+	"Asus WLHDD" | \
+	"Asus WL300G")
+		ucidef_set_interface_lan "eth1"
+		;;
+
+	"Asus WL330GE")
+		ucidef_add_switch "switch0" "4:lan" "5t@eth0"
+		;;
+
+	"Asus WL500G" | \
+	"Asus WL500W" | \
+	"Microsoft MN-700")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"Asus WL500GP V2" | \
+	"Buffalo WHR-G125" | \
+	"Motorola WR850G" | \
+	"Siemens SE505 V2")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"Asus WL700")
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	"Dell TrueMobile 2300")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+		;;
+
+	*)
+		detect_by_boardtype "$boardtype" "$boardnum"
+		;;
+	esac
+}
+
+
+local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+local boardtype="$(nvram get boardtype)"
+local boardnum="$(nvram get boardnum)"
+
+board_config_update
+
+ucidef_set_board_id "$boardtype${boardnum:+:$boardnum}"
+ucidef_set_model_name "$model"
+
+detect_by_model "$model" "$boardtype" "$boardnum"
+
+board_config_flush
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
deleted file mode 100755
index 1890cd0069..0000000000
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,238 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-	[ -e /etc/config/network ] && {
-		local batch
-
-		config_cb() {
-			case "$1" in
-			switch)
-				option_cb() {
-					case "$1" in
-					vlan[0-9]|vlan1[0-5])
-						local id="${1#vlan}"
-						local ports="${2%\*}"
-						append batch "delete network.eth0.${1}${N}"
-						append batch "set network.eth0_${id}=switch_vlan${N}"
-						append batch "set network.eth0_${id}.device=eth0${N}"
-						append batch "set network.eth0_${id}.vlan=${id}${N}"
-						append batch "set network.eth0_${id}.ports='${ports}'${N}"
-					;;
-					esac
-				}
-			;;
-			switch_vlan)
-				option_cb() { :; }
-				batch=""
-			;;
-			esac
-		}
-
-		config_load network
-
-		[ -n "$batch" ] && {
-			logger -t netconfig "migrating switch config to new format ..."
-			echo "$batch${N}commit network" | uci batch
-		}
-
-		exit 0
-	}
-
-	mkdir -p /etc/config
-
-	local cpuport=5
-	[ -e /sbin/swconfig ] && cpuport=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")
-	local switchname=eth0
-	[ -e /sbin/swconfig ] && switchname=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|switch0: \([^\\\\(]*\).*|\1|p")
-	local model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
-
-	local network_defs=`(
-		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-			# WGT634u
-			echo boardtype=wgt634u
-		else
-			strings "$(find_mtd_part nvram)"
-		fi
-	) | awk -v cpuport="$cpuport" -v model="$model" '
-	function macinc(mac, maca, i, result) {
-		split(mac, maca, ":")
-		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-		if (++maca[6] > 0xff) {
-			maca[5]++
-			maca[6] = 0
-		}
-		for (i = 1; i <= 6; i++) {
-			if (i != 1) result = result ":"
-			result = result sprintf("%02x", maca[i])
-		}
-		return result
-	}
-
-	BEGIN {
-		FS="="
-		c["lan_ifname"]="eth0.1"
-		c["wan_ifname"]="eth0.2"
-		c["vlan1ports"]="1 2 3 4 5t"
-		c["vlan2ports"]="0 5t"
-		for (i = 0; i < 6; i++) {
-			if (mac_check != "") mac_check = mac_check ":"
-			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-		}
-		if (cpuport == "8") {
-			c["vlan1ports"]="1 2 3 4 8t"
-			c["vlan2ports"]="0 8t"
-		}
-	}
-
-	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
-	 ($1 ~ /^vlan[0-9]{1,2}ports$/) {
-		nvram[$1] = $2
-	}
-
-	END {
-		if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
-		    ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
-		    ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
-			c["vlan1ports"] = "0 1 2 3 8t"
-			c["vlan2ports"] = "4 8t"
-		}
-		if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
-		    ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
-		    ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
-			c["vlan1ports"] = "0 1 2 3 5t"
-			c["vlan2ports"] = "4 5t"
-		}
-		if ((model == "Asus WLHDD") || (model == "Asus WL300G")) {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth1"
-		}
-		if (model == "Asus WL330GE") {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth0.1"
-			c["vlan1ports"] = "4 5t"
-			c["vlan2ports"] = ""
-		}
-		if ((model == "Asus WL500G") || (model == "Microsoft MN-700")) {
-			c["wan_ifname"] = "eth1"
-			c["lan_ifname"] = "eth0"
-		}
-		if ((model == "Asus WL500GP V2") || (model == "Buffalo WHR-G125")) {
-			c["vlan1ports"] = "0 1 2 3 5t"
-			c["vlan2ports"] = "4 5t"
-		}
-		if (model == "Dell TrueMobile 2300") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan1ports"] = "0 1 2 3 4 5"
-			c["vlan2ports"] = ""
-		}
-		if (nvram["boardtype"] == "bcm94710r4") {
-			# Toshiba WRC-1000
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
-			c["vlan1ports"] = "0 1 2 3 5t"
-			c["vlan2ports"] = "4 5t"
-		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan1ports"] = "1 2 3 4 5t"
-				c["vlan2ports"] = "0 5t"
-			} else {
-				# Generic BCM94704
-				c["vlan1ports"] = "0 1 2 3 4 5"
-				c["vlan2ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
-
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
-			}
-		}
-		# Buffalo WBR-B11 and Buffalo WBR-G54
-		if (nvram["boardtype"] == "bcm94710ap") {
-			c["vlan1ports"] = "0 1 2 3 4 5"
-			c["vlan2ports"] = ""
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-
-		# WAP54G
-		if ((nvram["boardnum"] == "2") || \
-			(nvram["boardnum"] == "1024")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# Sitecom WL-105b
-		if ((nvram["boardum"] == "2") && \
-			(nvram["GemtekPmonVer"] == "1")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.
-		# Hopefully someone will fix this properly soon.
-		if (model == "Asus WL700") {
-			c["lan_ifname"]="eth0.1"
-			c["wan_ifname"]="eth0.2"
-			c["vlan1ports"]="1 2 3 4 5t"
-			c["vlan2ports"]="0 5t"
-		}
-		if ((model == "Motorola WR850G") || (model == "Siemens SE505 V2")) {
-			c["vlan1ports"]="0 1 2 3 5t"
-			c["vlan2ports"]="4 5t"
-		}
-		if (model == "Asus WL500W") {
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-			c["vlan1ports"] = "0 1 2 3 4 5"
-			c["vlan2ports"] = ""
-		}
-		print "local vlan1ports=\"" c["vlan1ports"] "\";"
-		print "local vlan2ports=\"" c["vlan2ports"] "\";"
-		print "local lan_ifname=\"" c["lan_ifname"] "\";"
-		print "local lan_macaddr=\"" c["lan_macaddr"] "\";"
-		print "local wan_ifname=\"" c["wan_ifname"] "\";"
-		print "local wan_macaddr=\"" c["wan_macaddr"] "\";"
-	}'`
-
-	. /lib/functions/uci-defaults.sh
-
-	touch /etc/config/network
-
-	eval "$network_defs"
-
-	[ -n "$vlan1ports" -o -n "$vlan2ports" ] && {
-		local cfg=`ucidef_add_switch "$switchname" 1 1`
-		[ -n "$cfg" ] && uci rename network.$cfg=eth0
-		[ -n "$vlan1ports" ] && {
-			cfg=`ucidef_add_switch_vlan "$switchname" 1 "$vlan1ports"`
-		}
-		[ -n "$vlan2ports" ] && {
-			cfg=`ucidef_add_switch_vlan "$switchname" 2 "$vlan2ports"`
-		}
-	}
-
-	ucidef_set_interface_loopback
-
-	ucidef_set_interface_lan "$lan_ifname"
-	[ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan "$lan_macaddr"
-
-	[ -n "$wan_ifname" ] && {
-		ucidef_set_interface_wan "$wan_ifname"
-		[ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan "$wan_macaddr"
-	}
-
-	uci commit network
-}
diff --git a/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
index cef5add106..912fe96224 100644
--- a/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
+++ b/target/linux/brcm47xx/base-files/etc/uci-defaults/03_network_migration
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Copyright (C) 2014 OpenWrt.org
+# Copyright (C) 2014-2015 OpenWrt.org
 #
 
 uci show network | grep "\.vlan=0"
@@ -15,8 +15,8 @@ local wan_proto="$(uci -q get network.wan.proto)"
 local wan_ipaddr="$(uci -q get network.wan.ipaddr)"
 local wan_netmask="$(uci -q get network.wan.netmask)"
 
-rm /etc/config/network
-/etc/init.d/netconfig start
+echo "" > /etc/config/network
+config_generate
 
 uci set network.lan.proto=$lan_proto
 uci set network.lan.ipaddr=$lan_ipaddr