diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2012-04-13 19:35:40 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2012-04-13 19:35:40 +0000 |
| commit | 6af575967c780fa41029bdb64fdd68646ab516d1 (patch) | |
| tree | bf5fa402a077278c773200cb2aa941cc0b9e6883 /target/linux/brcm47xx | |
| parent | 3f240440c76765426018151ab3ea019547108326 (diff) | |
| download | upstream-6af575967c780fa41029bdb64fdd68646ab516d1.tar.gz upstream-6af575967c780fa41029bdb64fdd68646ab516d1.tar.bz2 upstream-6af575967c780fa41029bdb64fdd68646ab516d1.zip | |
kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
SVN-Revision: 31278
Diffstat (limited to 'target/linux/brcm47xx')
26 files changed, 25 insertions, 2013 deletions
diff --git a/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch index f86183466c..0042ff7ed8 100644 --- a/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch +++ b/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch @@ -22,7 +22,7 @@ --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -108,10 +108,68 @@ +@@ -117,10 +117,68 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 @@ -91,7 +91,7 @@ #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -300,6 +358,12 @@ +@@ -324,6 +382,12 @@ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ @@ -104,7 +104,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu { +@@ -333,6 +397,10 @@ struct bcma_chipcommon_pmu { }; #ifdef CONFIG_BCMA_DRIVER_MIPS @@ -115,7 +115,7 @@ struct bcma_pflash { u8 buswidth; u32 window; -@@ -334,7 +402,10 @@ struct bcma_drv_cc { +@@ -358,7 +426,10 @@ struct bcma_drv_cc { u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS diff --git a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch index a55d04bd0c..2de4ba0f52 100644 --- a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch +++ b/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch @@ -23,7 +23,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma +@@ -42,6 +42,11 @@ void bcma_chipco_serial_init(struct bcma u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); @@ -455,7 +455,7 @@ pr_info("found parallel flash.\n"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu { +@@ -399,6 +399,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS enum bcma_flash_type { BCMA_PFLASH, @@ -463,7 +463,7 @@ }; struct bcma_pflash { -@@ -383,6 +384,14 @@ struct bcma_pflash { +@@ -407,6 +408,14 @@ struct bcma_pflash { u32 window_size; }; @@ -478,7 +478,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -405,6 +414,9 @@ struct bcma_drv_cc { +@@ -429,6 +438,9 @@ struct bcma_drv_cc { enum bcma_flash_type flash_type; union { struct bcma_pflash pflash; @@ -488,7 +488,7 @@ }; int nr_serial_ports; -@@ -459,4 +471,14 @@ extern void bcma_chipco_chipctl_maskset( +@@ -483,4 +495,14 @@ extern void bcma_chipco_chipctl_maskset( extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); diff --git a/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch b/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch index cc76f83094..6336f41f53 100644 --- a/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch +++ b/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch @@ -239,7 +239,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -46,6 +46,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +@@ -47,6 +47,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr int bcma_sflash_init(struct bcma_drv_cc *cc); #endif /* CONFIG_BCMA_SFLASH */ @@ -971,7 +971,7 @@ +MODULE_DESCRIPTION("BCM47XX NAND flash driver"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -376,6 +376,7 @@ struct bcma_chipcommon_pmu { +@@ -400,6 +400,7 @@ struct bcma_chipcommon_pmu { enum bcma_flash_type { BCMA_PFLASH, BCMA_SFLASH, @@ -979,7 +979,7 @@ }; struct bcma_pflash { -@@ -392,6 +393,14 @@ struct bcma_sflash { +@@ -416,6 +417,14 @@ struct bcma_sflash { }; #endif /* CONFIG_BCMA_SFLASH */ @@ -994,7 +994,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -417,6 +426,9 @@ struct bcma_drv_cc { +@@ -441,6 +450,9 @@ struct bcma_drv_cc { #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif /* CONFIG_BCMA_SFLASH */ @@ -1004,7 +1004,7 @@ }; int nr_serial_ports; -@@ -481,4 +493,13 @@ int bcma_sflash_write(struct bcma_drv_cc +@@ -505,4 +517,13 @@ int bcma_sflash_write(struct bcma_drv_cc int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); #endif /* CONFIG_BCMA_SFLASH */ diff --git a/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch b/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch deleted file mode 100644 index cba9a63984..0000000000 --- a/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 7b9116eeaf44c0d368b5eeaa06eb101465284596 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Wed, 11 Jan 2012 15:26:11 +0100 -Subject: [PATCH 23/31] bcma: add the core unit number - -Some SoCs have two pcie or gmac cores and we need to know the number of -the specific core on the bus. This is the case for the BCM4706. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/scan.c | 14 ++++++++++++++ - include/linux/bcma/bcma.h | 1 + - 2 files changed, 15 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor - return NULL; - } - -+static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ if (core->id.id == coreid) -+ return core; -+ } -+ return NULL; -+} -+ - static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, - struct bcma_device_id *match, int core_num, - struct bcma_device *core) -@@ -392,6 +403,7 @@ int bcma_bus_scan(struct bcma_bus *bus) - bcma_scan_switch_core(bus, erombase); - - while (eromptr < eromend) { -+ struct bcma_device *other_core; - struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); - if (!core) - return -ENOMEM; -@@ -411,6 +423,8 @@ int bcma_bus_scan(struct bcma_bus *bus) - - core->core_index = core_num++; - bus->nr_cores++; -+ other_core = bcma_find_core_reverse(bus, core->id.id); -+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; - - pr_info("Core %d found: %s " - "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -136,6 +136,7 @@ struct bcma_device { - bool dev_registered; - - u8 core_index; -+ u8 core_unit; - - u32 addr; - u32 wrap; diff --git a/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch b/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch deleted file mode 100644 index ab5f48198e..0000000000 --- a/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch +++ /dev/null @@ -1,334 +0,0 @@ -From 300efafa8e1381a208c723bb9d03d46bf29f1ec0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 14 Jan 2012 20:02:15 +0100 -Subject: [PATCH 24/31] bcma: constants for PCI and use them - -There are loots of magic numbers used in the PCIe code. These constants -are from the Broadcom SDK and will also used in the host controller. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/driver_pci.c | 124 +++++++++++++++++++--------------- - include/linux/bcma/bcma_driver_pci.h | 85 +++++++++++++++++++++++ - 2 files changed, 155 insertions(+), 54 deletions(-) - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -4,6 +4,7 @@ - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch <m@bues.ch> -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -18,38 +19,39 @@ - - static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- return pcicore_read32(pc, 0x134); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); - } - - #if 0 - static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- pcicore_write32(pc, 0x134, data); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - #endif - - static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - u32 v; - int i; - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- v |= (0x1F << 18); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << -+ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= (phy << 4); -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - - udelay(10); - for (i = 0; i < 200; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; - msleep(1); - } -@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc - - static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u16 ret = 0; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 29); /* Read Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -- pcicore_write32(pc, mdio_data, v); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_READ; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; -+ -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) { -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { - udelay(10); -- ret = pcicore_read32(pc, mdio_data); -+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); - break; - } - msleep(1); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - return ret; - } - - static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, - u8 address, u16 data) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= data; -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; - msleep(1); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - - /************************************************** -@@ -138,20 +145,29 @@ static void bcma_pcie_mdio_write(struct - - static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) - { -- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; -+ u32 tmp; -+ -+ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); -+ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | -+ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; -+ else -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; - } - - static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) - { -- const u8 serdes_pll_device = 0x1D; -- const u8 serdes_rx_device = 0x1F; - u16 tmp; - -- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -- bcma_pcicore_polarity_workaround(pc)); -- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -- if (tmp & 0x4000) -- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, -+ BCMA_CORE_PCI_SERDES_RX_CTRL, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL); -+ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL, -+ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); - } - - /************************************************** ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,6 +53,35 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 - #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ - #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 -+#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ -+#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ -+#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 -+#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -+#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ -+#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ -+#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -+#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ -+#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ -+#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ -+#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ - #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -@@ -72,6 +101,62 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ - #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ - -+/* PCIE protocol PHY diagnostic registers */ -+#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ -+#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ -+#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ -+#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ -+#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ -+#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ -+#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ -+#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ -+#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ -+#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ -+#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ -+#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ -+#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ -+#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ -+#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ -+#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ -+#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ -+ -+/* PCIE protocol DLLP diagnostic registers */ -+#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ -+#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ -+#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ -+#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) -+#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ -+#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ -+#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ -+#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ -+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ -+#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ -+#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ -+#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ -+#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ -+#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ -+#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ -+#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ -+#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ -+ -+/* SERDES RX registers */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ -+#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ -+#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ -+#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ -+ -+/* SERDES PLL registers */ -+#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ -+#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ -+ - /* PCIcore specific boardflags */ - #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ - diff --git a/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch b/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch deleted file mode 100644 index 062a29d2f1..0000000000 --- a/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 01d8709c311858c37e02c96464ea4dc954334210 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 14 Jan 2012 20:03:09 +0100 -Subject: [PATCH 25/31] bcma: export bcma_pcie_read() - -This will be needed by the host controller. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/bcma_private.h | 2 ++ - drivers/bcma/driver_pci.c | 2 +- - 2 files changed, 3 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -51,6 +51,8 @@ int bcma_sflash_init(struct bcma_drv_cc - int bcma_nflash_init(struct bcma_drv_cc *cc); - #endif /* CONFIG_BCMA_NFLASH */ - -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); -+ - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ - extern int __init bcma_host_pci_init(void); ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -17,7 +17,7 @@ - * R/W ops. - **************************************************/ - --static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) - { - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); - pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); diff --git a/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch b/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch deleted file mode 100644 index 340172d44f..0000000000 --- a/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 3cd3138f2ef77e18abc99737c6740f35d61dbbb3 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 15 Jan 2012 23:05:05 +0100 -Subject: [PATCH 26/32] bcma: make some functions __devinit - -bcma_core_pci_hostmode_init() has to be in __devinit as it will call a -function in that section and so all functions calling it also have to -be in __devinit. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/bcma_private.h | 4 ++-- - drivers/bcma/driver_pci.c | 6 +++--- - drivers/bcma/driver_pci_host.c | 2 +- - drivers/bcma/host_pci.c | 4 ++-- - drivers/bcma/main.c | 2 +- - include/linux/bcma/bcma_driver_pci.h | 2 +- - 6 files changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -13,7 +13,7 @@ - struct bcma_bus; - - /* main.c */ --int bcma_bus_register(struct bcma_bus *bus); -+int __devinit bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); - int __init bcma_bus_early_register(struct bcma_bus *bus, - struct bcma_device *core_cc, -@@ -60,7 +60,7 @@ extern void __exit bcma_host_pci_exit(vo - #endif /* CONFIG_BCMA_HOST_PCI */ - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - - #endif ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -174,12 +174,12 @@ static void bcma_pcicore_serdes_workarou - * Init. - **************************************************/ - --static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) -+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) - { - bcma_pcicore_serdes_workaround(pc); - } - --static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) - { - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; -@@ -204,7 +204,7 @@ static bool bcma_core_pci_is_in_hostmode - return true; - } - --void bcma_core_pci_init(struct bcma_drv_pci *pc) -+void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) - { - if (pc->setup_done) - return; ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -8,7 +8,7 @@ - #include "bcma_private.h" - #include <linux/bcma/bcma.h> - --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) - { - pr_err("No support for PCI core in hostmode yet\n"); - } ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci - .awrite32 = bcma_host_pci_awrite32, - }; - --static int bcma_host_pci_probe(struct pci_dev *dev, -- const struct pci_device_id *id) -+static int __devinit bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) - { - struct bcma_bus *bus; - int err = -ENOMEM; ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -132,7 +132,7 @@ static void bcma_unregister_cores(struct - } - } - --int bcma_bus_register(struct bcma_bus *bus) -+int __devinit bcma_bus_register(struct bcma_bus *bus) - { - int err; - struct bcma_device *core; ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -169,7 +169,7 @@ struct bcma_drv_pci { - #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) - #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) - --extern void bcma_core_pci_init(struct bcma_drv_pci *pc); -+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); - diff --git a/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch b/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch index 850b52428d..e5740693f1 100644 --- a/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch +++ b/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch @@ -1,23 +1,3 @@ -From 47d0e8c2743729b4248585d33b55b6aaeac008d5 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 8 Jan 2012 16:53:15 +0100 -Subject: [PATCH 25/34] bcma: add PCIe host controller - -Some SoCs have a PCIe host controller to make it possible to attach -some other devices to it, like an other Wifi card. -This code was tested with an Netgear WNDR3400 (bcm4716 based), but -should work with all bcma based SoCs. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/pci/pci-bcm47xx.c | 49 +++- - drivers/bcma/bcma_private.h | 1 + - drivers/bcma/driver_pci.c | 38 +-- - drivers/bcma/driver_pci_host.c | 576 +++++++++++++++++++++++++++++++++- - include/linux/bcma/bcma_driver_pci.h | 34 ++ - include/linux/bcma/bcma_regs.h | 27 ++ - 6 files changed, 686 insertions(+), 39 deletions(-) - --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -25,6 +25,7 @@ @@ -94,752 +74,3 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +#endif + return 0; +} ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -60,6 +60,7 @@ extern void __exit bcma_host_pci_exit(vo - #endif /* CONFIG_BCMA_HOST_PCI */ - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); - void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -2,7 +2,7 @@ - * Broadcom specific AMBA - * PCI Core - * -- * Copyright 2005, Broadcom Corporation -+ * Copyright 2005, 2011, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch <m@bues.ch> - * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> - * -@@ -179,47 +179,19 @@ static void __devinit bcma_core_pci_clie - bcma_pcicore_serdes_workaround(pc); - } - --static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) --{ -- struct bcma_bus *bus = pc->core->bus; -- u16 chipid_top; -- -- chipid_top = (bus->chipinfo.id & 0xFF00); -- if (chipid_top != 0x4700 && -- chipid_top != 0x5300) -- return false; -- --#ifdef CONFIG_SSB_DRIVER_PCICORE -- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -- return false; --#endif /* CONFIG_SSB_DRIVER_PCICORE */ -- --#if 0 -- /* TODO: on BCMA we use address from EROM instead of magic formula */ -- u32 tmp; -- return !mips_busprobe32(tmp, (bus->mmio + -- (pc->core->core_index * BCMA_CORE_SIZE))); --#endif -- -- return true; --} -- - void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) - { - if (pc->setup_done) - return; - -- if (bcma_core_pci_is_in_hostmode(pc)) { - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); -+ if (pc->hostmode) - bcma_core_pci_hostmode_init(pc); --#else -- pr_err("Driver compiled without support for hostmode PCI\n"); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -- } else { -- bcma_core_pci_clientmode_init(pc); -- } - -- pc->setup_done = true; -+ if (!pc->hostmode) -+ bcma_core_pci_clientmode_init(pc); - } - - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,587 @@ - * Broadcom specific AMBA - * PCI Core in hostmode - * -+ * Copyright 2005 - 2011, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include "bcma_private.h" -+#include <linux/export.h> - #include <linux/bcma/bcma.h> -+#include <asm/paccess.h> -+ -+/* Probe a 32bit value on the bus and catch bus exceptions. -+ * Returns nonzero on a bus exception. -+ * This is MIPS specific */ -+#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) -+ -+/* Assume one-hot slot wiring */ -+#define BCMA_PCI_SLOT_MAX 16 -+#define PCI_CONFIG_SPACE_SIZE 256 -+ -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ u32 tmp; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { -+ pr_info("This PCI core is disabled and not working\n"); -+ return false; -+ } -+ -+ bcma_core_enable(pc->core, 0); -+ -+ return !mips_busprobe32(tmp, pc->core->io_addr); -+} -+ -+static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); -+} -+ -+static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, -+ u32 data) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); -+} -+ -+static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off) -+{ -+ u32 addr = 0; -+ -+ /* Issue config commands only when the data link is up (atleast -+ * one external pcie device is present). -+ */ -+ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) -+ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) -+ goto out; -+ -+ /* Type 0 transaction */ -+ /* Slide the PCI window to the appropriate slot */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ /* Calculate the address */ -+ addr = pc->host_controller->host_cfg_addr; -+ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); -+ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); -+ addr |= (off & ~3); -+ -+out: -+ return addr; -+} -+ -+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr, val; -+ void __iomem *mmio = 0; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ return -EINVAL; -+ -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ val = pcicore_read32(pc, addr); -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ -+ val = readl(mmio); -+ } -+ val >>= (8 * (off & 3)); -+ -+ switch (len) { -+ case 1: -+ *((u8 *)buf) = (u8)val; -+ break; -+ case 2: -+ *((u16 *)buf) = (u16)val; -+ break; -+ case 4: -+ *((u32 *)buf) = (u32)val; -+ break; -+ } -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ const void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr = 0, val = 0; -+ void __iomem *mmio = 0; -+ u16 chipid = pc->core->bus->chipinfo.id; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off < PCI_CONFIG_SPACE_SIZE) { -+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ } -+ -+ switch (len) { -+ case 1: -+ val = readl(mmio); -+ val &= ~(0xFF << (8 * (off & 3))); -+ val |= *((const u8 *)buf) << (8 * (off & 3)); -+ break; -+ case 2: -+ val = readl(mmio); -+ val &= ~(0xFFFF << (8 * (off & 3))); -+ val |= *((const u16 *)buf) << (8 * (off & 3)); -+ break; -+ case 4: -+ val = *((const u32 *)buf); -+ break; -+ } -+ if (dev == 0 && !addr) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ bcma_pcie_write_config(pc, addr, val); -+ } else { -+ writel(val, mmio); -+ -+ if (chipid == 0x4716 || chipid == 0x4748) -+ readl(mmio); -+ } -+ -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, &val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+/* return cap_offset if requested capability exists in the PCI config space */ -+static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, -+ unsigned int dev, -+ unsigned int func, u8 req_cap_id, -+ unsigned char *buf, u32 *buflen) -+{ -+ u8 cap_id; -+ u8 cap_ptr = 0; -+ u32 bufsize; -+ u8 byte_val; -+ -+ /* check for Header type 0 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, -+ sizeof(u8)); -+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) -+ return cap_ptr; -+ -+ /* check if the capability pointer field exists */ -+ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, -+ sizeof(u8)); -+ if (!(byte_val & PCI_STATUS_CAP_LIST)) -+ return cap_ptr; -+ -+ /* check if the capability pointer is 0x00 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ -+ /* loop thr'u the capability list and see if the requested capabilty -+ * exists */ -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); -+ while (cap_id != req_cap_id) { -+ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, -+ sizeof(u8)); -+ } -+ -+ /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { -+ u8 cap_data; -+ -+ bufsize = *buflen; -+ if (!bufsize) -+ return cap_ptr; -+ -+ *buflen = 0; -+ -+ /* copy the cpability data excluding cap ID and next ptr */ -+ cap_data = cap_ptr + 2; -+ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) -+ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; -+ *buflen = bufsize; -+ while (bufsize--) { -+ bcma_extpci_read_config(pc, dev, func, cap_data, buf, -+ sizeof(u8)); -+ cap_data++; -+ buf++; -+ } -+ } -+ -+ return cap_ptr; -+} -+ -+/* If the root port is capable of returning Config Request -+ * Retry Status (CRS) Completion Status to software then -+ * enable the feature. -+ */ -+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) -+{ -+ u8 cap_ptr, root_ctrl, root_cap, dev; -+ u16 val16; -+ int i; -+ -+ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, -+ NULL); -+ root_cap = cap_ptr + PCI_EXP_RTCAP; -+ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); -+ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { -+ /* Enable CRS software visibility */ -+ root_ctrl = cap_ptr + PCI_EXP_RTCTL; -+ val16 = PCI_EXP_RTCTL_CRSSVE; -+ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, -+ sizeof(u16)); -+ -+ /* Initiate a configuration request to read the vendor id -+ * field of the device function's config space header after -+ * 100 ms wait time from the end of Reset. If the device is -+ * not done with its internal initialization, it must at -+ * least return a completion TLP, with a completion status -+ * of "Configuration Request Retry Status (CRS)". The root -+ * complex must complete the request to the host by returning -+ * a read-data value of 0001h for the Vendor ID field and -+ * all 1s for any additional bytes included in the request. -+ * Poll using the config reads for max wait time of 1 sec or -+ * until we receive the successful completion status. Repeat -+ * the procedure for all the devices. -+ */ -+ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { -+ for (i = 0; i < 100000; i++) { -+ bcma_extpci_read_config(pc, dev, 0, -+ PCI_VENDOR_ID, &val16, -+ sizeof(val16)); -+ if (val16 != 0x1) -+ break; -+ udelay(10); -+ } -+ if (val16 == 0x1) -+ pr_err("PCI: Broken device in slot %d\n", dev); -+ } -+ } -+} - - void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) - { -- pr_err("No support for PCI core in hostmode yet\n"); -+ struct bcma_bus *bus = pc->core->bus; -+ struct bcma_drv_pci_host *pc_host; -+ u32 tmp; -+ u32 pci_membase_1G; -+ unsigned long io_map_base; -+ -+ pr_info("PCIEcore in host mode found\n"); -+ -+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); -+ if (!pc_host) { -+ pr_err("can not allocate memory"); -+ return; -+ } -+ -+ pc->host_controller = pc_host; -+ pc_host->pci_controller.io_resource = &pc_host->io_resource; -+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; -+ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; -+ pc_host->pdev = pc; -+ -+ pci_membase_1G = BCMA_SOC_PCI_DMA; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; -+ -+ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; -+ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; -+ -+ pc_host->mem_resource.name = "BCMA PCIcore external memory", -+ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; -+ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ pc_host->io_resource.name = "BCMA PCIcore external I/O", -+ pc_host->io_resource.start = 0x100; -+ pc_host->io_resource.end = 0x7FF; -+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ /* Reset RC */ -+ udelay(3000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); -+ udelay(1000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | -+ BCMA_CORE_PCI_CTL_RST_OE); -+ -+ /* 64 MB I/O access window. On 4716, use -+ * sbtopcie0 to access the device registers. We -+ * can't use address match 2 (1 GB window) region -+ * as mips can't generate 64-bit address on the -+ * backplane. -+ */ -+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); -+ } else if (bus->chipinfo.id == 0x5300) { -+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; -+ if (pc->core->core_unit == 0) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI_MEM); -+ } else if (pc->core->core_unit == 1) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI1_MEM); -+ } -+ } else -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_IO); -+ -+ /* 64 MB configuration access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ -+ /* 1 GB memory access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, -+ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); -+ -+ -+ /* As per PCI Express Base Spec 1.1 we need to wait for -+ * at least 100 ms from the end of a reset (cold/warm/hot) -+ * before issuing configuration requests to PCI Express -+ * devices. -+ */ -+ udelay(100000); -+ -+ bcma_core_pci_enable_crs(pc); -+ -+ /* Enable PCI bridge BAR0 memory & master access */ -+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -+ -+ /* Enable PCI interrupts */ -+ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); -+ -+ /* Ok, ready to run, register it to the system. -+ * The following needs change, if we want to port hostmode -+ * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); -+ pc_host->pci_controller.io_map_base = io_map_base; -+ set_io_port_base(pc_host->pci_controller.io_map_base); -+ /* Give some time to the PCI controller to configure itself with the new -+ * values. Not waiting at this point causes crashes of the machine. */ -+ mdelay(10); -+ register_pci_controller(&pc_host->pci_controller); -+ return; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) -+{ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ if (pcibios_enable_device(dev, ~0) < 0) { -+ pr_err("PCI: BCMA bridge enable failed\n"); -+ return; -+ } -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); -+ -+/* Early PCI fixup for all PCI-cores to set the correct memory address. */ -+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) -+{ -+ struct resource *res; -+ int pos; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) == 0) -+ return; -+ -+ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); -+ -+ for (pos = 0; pos < 6; pos++) { -+ res = &dev->resource[pos]; -+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) -+ pci_assign_resource(dev, pos); -+ } -+} -+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int bcma_core_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ -+ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); -+ -+ /* Fix up interrupt lines */ -+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -+ -+/* PCI device IRQ mapping. */ -+int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ return bcma_core_mips_irq(pc_host->pdev->core) + 2; - } -+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -160,9 +160,40 @@ struct pci_dev; - /* PCIcore specific boardflags */ - #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ - -+/* PCIE Config space accessing MACROS */ -+#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ -+#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ -+#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ -+#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ -+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ -+ -+/* PCIE Root Capability Register bits (Host mode only) */ -+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -+ -+struct bcma_drv_pci; -+ -+struct bcma_drv_pci_host { -+ struct bcma_drv_pci *pdev; -+ -+ u32 host_cfg_addr; -+ spinlock_t cfgspace_lock; -+ -+ struct pci_controller pci_controller; -+ struct pci_ops pci_ops; -+ struct resource mem_resource; -+ struct resource io_resource; -+}; -+ - struct bcma_drv_pci { - struct bcma_device *core; - u8 setup_done:1; -+ u8 hostmode:1; -+ -+ struct bcma_drv_pci_host *host_controller; - }; - - /* Register access */ -@@ -173,4 +204,7 @@ extern void __devinit bcma_core_pci_init - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); - -+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); -+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -+ - #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ ---- a/include/linux/bcma/bcma_regs.h -+++ b/include/linux/bcma/bcma_regs.h -@@ -56,4 +56,31 @@ - #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ - #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ - -+/* SiliconBackplane Address Map. -+ * All regions may not exist on all chips. -+ */ -+#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ -+#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) -+#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ -+#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ -+ -+ -+#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ -+#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), low 32 bits -+ */ -+#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ -+#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ - #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch b/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch deleted file mode 100644 index 14d112746a..0000000000 --- a/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch +++ /dev/null @@ -1,59 +0,0 @@ -From eecd733c14952b074d7488934a4f3dc83c9c426b Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 14 Jan 2012 16:29:51 +0100 -Subject: [PATCH 28/32] bcma: add bus num counter - -If we have two bcma buses on one computer the second will not work -without this patch. Now each bus gets an own number. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/main.c | 12 +++++++++++- - include/linux/bcma/bcma.h | 1 + - 2 files changed, 12 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -13,6 +13,12 @@ - MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); - MODULE_LICENSE("GPL"); - -+/* contains the number the next bus should get. */ -+static unsigned int bcma_bus_next_num = 0; -+ -+/* bcma_buses_mutex locks the bcma_bus_next_num */ -+static DEFINE_MUTEX(bcma_buses_mutex); -+ - static int bcma_bus_match(struct device *dev, struct device_driver *drv); - static int bcma_device_probe(struct device *dev); - static int bcma_device_remove(struct device *dev); -@@ -93,7 +99,7 @@ static int bcma_register_cores(struct bc - - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; -- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); -+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); - - switch (bus->hosttype) { - case BCMA_HOSTTYPE_PCI: -@@ -137,6 +143,10 @@ int __devinit bcma_bus_register(struct b - int err; - struct bcma_device *core; - -+ mutex_lock(&bcma_buses_mutex); -+ bus->num = bcma_bus_next_num++; -+ mutex_unlock(&bcma_buses_mutex); -+ - /* Scan for devices (cores) */ - err = bcma_bus_scan(bus); - if (err) { ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -196,6 +196,7 @@ struct bcma_bus { - struct list_head cores; - u8 nr_cores; - u8 init_done:1; -+ u8 num; - - struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; diff --git a/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch b/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch deleted file mode 100644 index 3ae5711535..0000000000 --- a/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 1cd3d0de72e42161fe0df355c5429459265aeef0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 14 Jan 2012 16:11:17 +0100 -Subject: [PATCH 30/32] bcma: add extra sprom check - -This check is needed on the BCM43224 device as it says in the -capabilities it has an sprom but is extra check says it has not. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/sprom.c | 8 ++++++++ - include/linux/bcma/bcma_driver_chipcommon.h | 16 ++++++++++++++++ - 2 files changed, 24 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -209,6 +209,7 @@ int bcma_sprom_get(struct bcma_bus *bus) - { - u16 offset; - u16 *sprom; -+ u32 sromctrl; - int err = 0; - - if (!bus->drv_cc.core) -@@ -217,6 +218,12 @@ int bcma_sprom_get(struct bcma_bus *bus) - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; - -+ if (bus->drv_cc.core->id.rev >= 32) { -+ sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -+ if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT)) -+ return -ENOENT; -+ } -+ - sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), - GFP_KERNEL); - if (!sprom) ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -239,6 +239,22 @@ - #define BCMA_CC_FLASH_CFG 0x0128 - #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ - #define BCMA_CC_FLASH_WAITCNT 0x012C -+#define BCMA_CC_SROM_CONTROL 0x0190 -+#define BCMA_CC_SROM_CONTROL_START 0x80000000 -+#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 -+#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 -+#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 -+#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 -+#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 -+#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 -+#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 -+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 -+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 -+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 - /* 0x1E0 is defined as shared BCMA_CLKCTLST */ - #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ - #define BCMA_CC_UART0_DATA 0x0300 diff --git a/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch b/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch index 72463d454a..77062c3dab 100644 --- a/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch +++ b/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch @@ -14,7 +14,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c -@@ -278,6 +278,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ +@@ -269,6 +269,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, diff --git a/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch b/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch deleted file mode 100644 index d26807f3eb..0000000000 --- a/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 7b90e7040b9783b91a4e2baf72ac32d3a00f9f2d Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 21 Jan 2012 11:18:25 +0100 -Subject: [PATCH 31/34] ssb: fix cardbus in hostmode - - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/ssb/driver_pcicore.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_ - u32 tmp; - - /* We do only have one cardbus device behind the bridge. */ -- if (pc->cardbusmode && (dev >= 1)) -+ if (pc->cardbusmode && (dev > 1)) - goto out; - - if (bus == 0) { diff --git a/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch b/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch index 97e3f9c34a..7e40fc80b7 100644 --- a/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch +++ b/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch @@ -12,7 +12,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -141,12 +141,19 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -142,12 +142,19 @@ void bcma_pmu_workarounds(struct bcma_dr /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ break; case 43224: @@ -38,7 +38,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> case 43225: --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -374,6 +374,11 @@ +@@ -382,6 +382,11 @@ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ diff --git a/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch b/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch deleted file mode 100644 index ce16cac3cb..0000000000 --- a/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 293fcc92dae1284c35a3bb51e7f9eb13b52e58fe Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 31 Jan 2012 23:36:44 +0100 -Subject: [PATCH 2/4] bcma: log the id, rev and pkg of the chip found - -This makes us see what type of hardware someone uses by the dmesg -output. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/scan.c | 10 +++++++--- - 1 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -364,6 +364,7 @@ static int bcma_get_next_core(struct bcm - void bcma_init_bus(struct bcma_bus *bus) - { - s32 tmp; -+ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); - - if (bus->init_done) - return; -@@ -374,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) - bcma_scan_switch_core(bus, BCMA_ADDR_BASE); - - tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", -+ chipinfo->id, chipinfo->rev, chipinfo->pkg); -+ - bus->init_done = true; - } - diff --git a/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch b/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch deleted file mode 100644 index a5a8bc4c76..0000000000 --- a/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7ddcc963030bbc82add2efbd49e696ae8aff3ae6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 31 Jan 2012 23:38:36 +0100 -Subject: [PATCH 3/4] ssb: log the id, rev and pkg of the chip found - -This makes us see what type of hardware someone uses by the dmesg -output. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/ssb/scan.c | 3 +++ - 1 files changed, 3 insertions(+), 0 deletions(-) - ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, - bus->chip_package = 0; - } - } -+ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " -+ "package 0x%02X\n", bus->chip_id, bus->chip_rev, -+ bus->chip_package); - if (!bus->nr_devices) - bus->nr_devices = chipid_to_nrcores(bus->chip_id); - if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { diff --git a/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch b/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch deleted file mode 100644 index de251f451a..0000000000 --- a/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -33,8 +33,8 @@ struct ssb_sprom { - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ - u8 country_code; /* Country Code */ -- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ -+ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ - u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ - u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ - u16 pa0b0; -@@ -53,10 +53,10 @@ struct ssb_sprom { - u8 gpio1; /* GPIO pin 1 */ - u8 gpio2; /* GPIO pin 2 */ - u8 gpio3; /* GPIO pin 3 */ -- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ - u8 itssi_a; /* Idle TSSI Target for A-PHY */ - u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u8 tri2g; /* 2.4GHz TX isolation */ -@@ -67,8 +67,8 @@ struct ssb_sprom { - u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ - u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ - u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ -- u8 rxpo2g; /* 2GHz RX power offset */ -- u8 rxpo5g; /* 5GHz RX power offset */ -+ s8 rxpo2g; /* 2GHz RX power offset */ -+ s8 rxpo5g; /* 5GHz RX power offset */ - u8 rssisav2g; /* 2GHz RSSI params */ - u8 rssismc2g; - u8 rssismf2g; diff --git a/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch b/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch deleted file mode 100644 index 56357e7ebf..0000000000 --- a/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -19,7 +19,7 @@ struct ssb_driver; - struct ssb_sprom_core_pwr_info { - u8 itssi_2g, itssi_5g; - u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -- u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; -+ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; - }; - - struct ssb_sprom { diff --git a/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch b/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch deleted file mode 100644 index ab01516d30..0000000000 --- a/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -33,6 +33,7 @@ struct ssb_sprom { - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ - u8 country_code; /* Country Code */ -+ char alpha2[2]; /* Country Code as two chars like EU or US */ - u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ - u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ - u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ diff --git a/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch b/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch deleted file mode 100644 index 21893efb88..0000000000 --- a/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch +++ /dev/null @@ -1,93 +0,0 @@ - ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -32,6 +32,8 @@ struct ssb_sprom { - u8 et0mdcport; /* MDIO for enet0 */ - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ -+ u16 board_num; /* Board number from SPROM. */ -+ u16 board_type; /* Board type from SPROM. */ - u8 country_code; /* Country Code */ - char alpha2[2]; /* Country Code as two chars like EU or US */ - u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -@@ -112,7 +114,79 @@ struct ssb_sprom { - } ghz5; - } fem; - -- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ -+ u16 mcs2gpo[8]; -+ u16 mcs5gpo[8]; -+ u16 mcs5glpo[8]; -+ u16 mcs5ghpo[8]; -+ u8 opo; -+ -+ u8 rxgainerr2ga[3]; -+ u8 rxgainerr5gla[3]; -+ u8 rxgainerr5gma[3]; -+ u8 rxgainerr5gha[3]; -+ u8 rxgainerr5gua[3]; -+ -+ u8 noiselvl2ga[3]; -+ u8 noiselvl5gla[3]; -+ u8 noiselvl5gma[3]; -+ u8 noiselvl5gha[3]; -+ u8 noiselvl5gua[3]; -+ -+ u8 regrev; -+ u8 txchain; -+ u8 rxchain; -+ u8 antswitch; -+ u16 cddpo; -+ u16 stbcpo; -+ u16 bw40po; -+ u16 bwduppo; -+ -+ u8 tempthresh; -+ u8 tempoffset; -+ u16 rawtempsense; -+ u8 measpower; -+ u8 tempsense_slope; -+ u8 tempcorrx; -+ u8 tempsense_option; -+ u8 freqoffset_corr; -+ u8 iqcal_swp_dis; -+ u8 hw_iqcal_en; -+ u8 elna2g; -+ u8 elna5g; -+ u8 phycal_tempdelta; -+ u8 temps_period; -+ u8 temps_hysteresis; -+ u8 measpower1; -+ u8 measpower2; -+ u8 pcieingress_war; -+ -+ /* power per rate from sromrev 9 */ -+ u16 cckbw202gpo; -+ u16 cckbw20ul2gpo; -+ u32 legofdmbw202gpo; -+ u32 legofdmbw20ul2gpo; -+ u32 legofdmbw205glpo; -+ u32 legofdmbw20ul5glpo; -+ u32 legofdmbw205gmpo; -+ u32 legofdmbw20ul5gmpo; -+ u32 legofdmbw205ghpo; -+ u32 legofdmbw20ul5ghpo; -+ u32 mcsbw202gpo; -+ u32 mcsbw20ul2gpo; -+ u32 mcsbw402gpo; -+ u32 mcsbw205glpo; -+ u32 mcsbw20ul5glpo; -+ u32 mcsbw405glpo; -+ u32 mcsbw205gmpo; -+ u32 mcsbw20ul5gmpo; -+ u32 mcsbw405gmpo; -+ u32 mcsbw205ghpo; -+ u32 mcsbw20ul5ghpo; -+ u32 mcsbw405ghpo; -+ u16 mcs32po; -+ u16 legofdm40duppo; -+ u8 sar2g; -+ u8 sar5g; - }; - - /* Information about the PCB the circuitry is soldered on. */ diff --git a/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch b/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch deleted file mode 100644 index 79e32a2414..0000000000 --- a/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch +++ /dev/null @@ -1,30 +0,0 @@ - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -61,7 +61,7 @@ static struct bus_type bcma_bus_type = { - .dev_attrs = bcma_device_attrs, - }; - --static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) -+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) - { - struct bcma_device *core; - -@@ -71,6 +71,7 @@ static struct bcma_device *bcma_find_cor - } - return NULL; - } -+EXPORT_SYMBOL_GPL(bcma_find_core); - - static void bcma_release_core_dev(struct device *dev) - { ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -285,6 +285,7 @@ static inline void bcma_maskset16(struct - bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); - } - -+extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); - extern bool bcma_core_is_enabled(struct bcma_device *core); - extern void bcma_core_disable(struct bcma_device *core, u32 flags); - extern int bcma_core_enable(struct bcma_device *core, u32 flags); diff --git a/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch b/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch deleted file mode 100644 index 296e10ae10..0000000000 --- a/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch +++ /dev/null @@ -1,125 +0,0 @@ - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -2,6 +2,8 @@ - * Broadcom specific AMBA - * SPROM reading - * -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - -@@ -16,6 +18,45 @@ - - #define SPOFF(offset) ((offset) / sizeof(u16)) - -+static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); -+ -+/** -+ * bcma_arch_register_fallback_sprom - Registers a method providing a -+ * fallback SPROM if no SPROM is found. -+ * -+ * @sprom_callback: The callback function. -+ * -+ * With this function the architecture implementation may register a -+ * callback handler which fills the SPROM data structure. The fallback is -+ * used for PCI based BCMA devices, where no valid SPROM can be found -+ * in the shadow registers and to provide the SPROM for SoCs where BCMA is -+ * to controll the system bus. -+ * -+ * This function is useful for weird architectures that have a half-assed -+ * BCMA device hardwired to their PCI bus. -+ * -+ * This function is available for architecture code, only. So it is not -+ * exported. -+ */ -+int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)) -+{ -+ if (get_fallback_sprom) -+ return -EEXIST; -+ get_fallback_sprom = sprom_callback; -+ -+ return 0; -+} -+ -+static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, -+ struct ssb_sprom *out) -+{ -+ if (!get_fallback_sprom) -+ return -ENOENT; -+ -+ return get_fallback_sprom(bus, out); -+} -+ - /************************************************** - * R/W ops. - **************************************************/ -@@ -205,23 +246,43 @@ static void bcma_sprom_extract_r8(struct - SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; - } - -+static bool bcma_is_sprom_available(struct bcma_bus *bus) -+{ -+ u32 sromctrl; -+ -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return false; -+ -+ if (bus->drv_cc.core->id.rev >= 32) { -+ sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -+ return sromctrl & BCMA_CC_SROM_CONTROL_PRESENT; -+ } -+ return true; -+} -+ - int bcma_sprom_get(struct bcma_bus *bus) - { - u16 offset; - u16 *sprom; -- u32 sromctrl; - int err = 0; - - if (!bus->drv_cc.core) - return -EOPNOTSUPP; - -- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -- return -ENOENT; -- -- if (bus->drv_cc.core->id.rev >= 32) { -- sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -- if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT)) -- return -ENOENT; -+ if (!bcma_is_sprom_available(bus)) { -+ /* -+ * Maybe there is no SPROM on the device? -+ * Now we ask the arch code if there is some sprom -+ * available for this device in some other storage. -+ */ -+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -+ if (err) { -+ pr_warn("Using fallback SPROM failed (err %d)\n", err); -+ } else { -+ pr_debug("Using SPROM revision %d provided by" -+ " platform.\n", bus->sprom.revision); -+ return 0; -+ } - } - - sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -177,6 +177,12 @@ int __bcma_driver_register(struct bcma_d - - extern void bcma_driver_unregister(struct bcma_driver *drv); - -+/* Set a fallback SPROM. -+ * See kdoc at the function definition for complete documentation. */ -+extern int bcma_arch_register_fallback_sprom( -+ int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)); -+ - struct bcma_bus { - /* The MMIO area. */ - void __iomem *mmio; diff --git a/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch b/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch index 174f9a23de..6ec7bd3858 100644 --- a/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch +++ b/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch @@ -344,8 +344,8 @@ + nvram_read_u8(prefix, NULL, "ledbh3", &sprom->gpio3, 0xff); + nvram_read_u8(prefix, NULL, "aa2g", &sprom->ant_available_bg, 0); + nvram_read_u8(prefix, NULL, "aa5g", &sprom->ant_available_a, 0); -+ nvram_read_s8(prefix, NULL, "ag0", &sprom->antenna_gain.ghz24.a0, 0); -+ nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.ghz24.a1, 0); ++ nvram_read_s8(prefix, NULL, "ag0", &sprom->antenna_gain.a0, 0); ++ nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0); + nvram_read_alpha2(prefix, "ccode", &sprom->alpha2); +} + @@ -428,8 +428,8 @@ + &sprom->boardflags2_hi); + nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0); + nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0); -+ nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.ghz24.a2, 0); -+ nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.ghz24.a3, 0); ++ nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.a2, 0); ++ nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.a3, 0); + nvram_read_u8(prefix, NULL, "txchain", &sprom->txchain, 0xf); + nvram_read_u8(prefix, NULL, "rxchain", &sprom->rxchain, 0xf); + nvram_read_u8(prefix, NULL, "antswitch", &sprom->antswitch, 0xff); diff --git a/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch deleted file mode 100644 index 1998bbef09..0000000000 --- a/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch +++ /dev/null @@ -1,134 +0,0 @@ -From 6d174f732e198aae8583cc5414b11b988bfd37a9 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Mon, 30 Jan 2012 22:44:15 +0100 -Subject: [PATCH 4/4] ssb: add support for bcm5354 - -This patch adds support the the BCM5354 SoC. -It has a PMU and a constant not configurable clock. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/ssb/driver_chipcommon_pmu.c | 48 +++++++++++++++++++++++++++++++--- - drivers/ssb/driver_mipscore.c | 3 ++ - drivers/ssb/main.c | 3 ++ - drivers/ssb/ssb_private.h | 4 +++ - 4 files changed, 53 insertions(+), 5 deletions(-) - ---- a/drivers/ssb/driver_chipcommon_pmu.c -+++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -13,6 +13,9 @@ - #include <linux/ssb/ssb_driver_chipcommon.h> - #include <linux/delay.h> - #include <linux/export.h> -+#ifdef CONFIG_BCM47XX -+#include <asm/mach-bcm47xx/nvram.h> -+#endif - - #include "ssb_private.h" - -@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s - u32 pmuctl, tmp, pllctl; - unsigned int i; - -- if ((bus->chip_id == 0x5354) && !crystalfreq) { -- /* The 5354 crystal freq is 25MHz */ -- crystalfreq = 25000; -- } - if (crystalfreq) - e = pmu0_plltab_find_entry(crystalfreq); - if (!e) -@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ - u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ - - if (bus->bustype == SSB_BUSTYPE_SSB) { -- /* TODO: The user may override the crystal frequency. */ -+#ifdef CONFIG_BCM47XX -+ char buf[20]; -+ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) -+ crystalfreq = simple_strtoul(buf, NULL, 0); -+#endif - } - - switch (bus->chip_id) { -@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ - ssb_pmu1_pllinit_r0(cc, crystalfreq); - break; - case 0x4328: -+ ssb_pmu0_pllinit_r0(cc, crystalfreq); -+ break; - case 0x5354: -+ if (crystalfreq == 0) -+ crystalfreq = 25000; - ssb_pmu0_pllinit_r0(cc, crystalfreq); - break; - case 0x4322: -@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch - - EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); - EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); -+ -+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ -+ return 240000000; -+ default: -+ ssb_printk(KERN_ERR PFX -+ "ERROR: PMU cpu clock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} -+ -+u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ return 120000000; -+ default: -+ ssb_printk(KERN_ERR PFX -+ "ERROR: PMU controlclock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -232,6 +232,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - struct ssb_bus *bus = mcore->dev->bus; - u32 pll_type, n, m, rate = 0; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_cpu_clock(&bus->chipco); -+ - if (bus->extif.dev) { - ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); - } else if (bus->chipco.dev) { ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1094,6 +1094,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) - u32 plltype; - u32 clkctl_n, clkctl_m; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_controlclock(&bus->chipco); -+ - if (ssb_extif_available(&bus->extif)) - ssb_extif_get_clockcontrol(&bus->extif, &plltype, - &clkctl_n, &clkctl_m); ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -211,4 +211,8 @@ static inline void b43_pci_ssb_bridge_ex - } - #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ - -+/* driver_chipcommon_pmu.c */ -+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); -+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); -+ - #endif /* LINUX_SSB_PRIVATE_H_ */ diff --git a/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch b/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch index 457bf93646..3a2d512dc7 100644 --- a/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch +++ b/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch @@ -1,6 +1,6 @@ --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -490,8 +490,9 @@ void __devinit bcma_core_pci_hostmode_in +@@ -491,8 +491,9 @@ void __devinit bcma_core_pci_hostmode_in /* Ok, ready to run, register it to the system. * The following needs change, if we want to port hostmode * to non-MIPS platform. */ diff --git a/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch b/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch index d77f30df68..adaadcc031 100644 --- a/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch +++ b/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch @@ -1,6 +1,6 @@ --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -118,7 +118,7 @@ static int bcma_extpci_read_config(struc +@@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struc if (unlikely(!addr)) goto out; err = -ENOMEM; @@ -9,7 +9,7 @@ if (!mmio) goto out; -@@ -170,7 +170,7 @@ static int bcma_extpci_write_config(stru +@@ -171,7 +171,7 @@ static int bcma_extpci_write_config(stru addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); @@ -18,7 +18,7 @@ if (!mmio) goto out; } -@@ -179,7 +179,7 @@ static int bcma_extpci_write_config(stru +@@ -180,7 +180,7 @@ static int bcma_extpci_write_config(stru if (unlikely(!addr)) goto out; err = -ENOMEM; diff --git a/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch b/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch deleted file mode 100644 index 14d795e706..0000000000 --- a/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -458,15 +458,18 @@ int bcma_bus_scan(struct bcma_bus *bus) - core->bus = bus; - - err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -- if (err == -ENODEV) { -- core_num++; -- continue; -- } else if (err == -ENXIO) -- continue; -- else if (err == -ESPIPE) -- break; -- else if (err < 0) -+ if (err < 0) { -+ kfree(core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) { -+ continue; -+ } else if (err == -ESPIPE) { -+ break; -+ } - return err; -+ } - - core->core_index = core_num++; - bus->nr_cores++; |