aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@openwrt.org>2009-09-26 11:51:26 +0000
committerHauke Mehrtens <hauke@openwrt.org>2009-09-26 11:51:26 +0000
commite6843bba59cdd65546c4f36472198201b86d8e9d (patch)
tree2146cd452659efb15c7429f491f6f01c694af9ca /target/linux/brcm47xx
parent9f266abb8cb79ab7d019688629d1ed035b1aa747 (diff)
downloadupstream-e6843bba59cdd65546c4f36472198201b86d8e9d.tar.gz
upstream-e6843bba59cdd65546c4f36472198201b86d8e9d.tar.bz2
upstream-e6843bba59cdd65546c4f36472198201b86d8e9d.zip
[brcm47xx] Remove patches already included in mainline kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17735 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm47xx')
-rw-r--r--target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch326
-rw-r--r--target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch183
2 files changed, 0 insertions, 509 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch b/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch
deleted file mode 100644
index 3d2b2a8df6..0000000000
--- a/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-This add watchdog driver for broadcom 47xx device.
-It uses the ssb subsytem to access embeded watchdog device.
-
-Because the watchdog timeout is very short (about 2s), a soft timer is used
-to increase the watchdog period.
-
-Note : A patch for exporting the ssb_watchdog_timer_set will
-be submitted on next linux-mips merge. Without this patch it can't
-be build as a module.
-
-Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs>
-Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -764,6 +764,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config BCM47XX_WDT
-+ tristate "Broadcom BCM47xx Watchdog Timer"
-+ depends on BCM47XX
-+ help
-+ Hardware driver for the Broadcom BCM47xx Watchog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
-
- # PARISC Architecture
-
---- /dev/null
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -0,0 +1,286 @@
-+/*
-+ * Watchdog driver for Broadcom BCM47XX
-+ *
-+ * Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs>
-+ * Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/reboot.h>
-+#include <linux/types.h>
-+#include <linux/uaccess.h>
-+#include <linux/watchdog.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/ssb/ssb_embedded.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+
-+#define DRV_NAME "bcm47xx_wdt"
-+
-+#define WDT_DEFAULT_TIME 30 /* seconds */
-+#define WDT_MAX_TIME 256 /* seconds */
-+
-+static int wdt_time = WDT_DEFAULT_TIME;
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+
-+module_param(wdt_time, int, 0);
-+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
-+ __MODULE_STRING(WDT_DEFAULT_TIME) ")");
-+
-+#ifdef CONFIG_WATCHDOG_NOWAYOUT
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+#endif
-+
-+static unsigned long bcm47xx_wdt_busy;
-+static char expect_release;
-+static struct timer_list wdt_timer;
-+static atomic_t ticks;
-+
-+static inline void bcm47xx_wdt_hw_start(void)
-+{
-+ /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-+ ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+}
-+
-+static inline int bcm47xx_wdt_hw_stop(void)
-+{
-+ return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
-+}
-+
-+static void bcm47xx_timer_tick(unsigned long unused)
-+{
-+ if (!atomic_dec_and_test(&ticks)) {
-+ bcm47xx_wdt_hw_start();
-+ mod_timer(&wdt_timer, jiffies + HZ);
-+ } else {
-+ printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
-+ }
-+}
-+
-+static inline void bcm47xx_wdt_pet(void)
-+{
-+ atomic_set(&ticks, wdt_time);
-+}
-+
-+static void bcm47xx_wdt_start(void)
-+{
-+ bcm47xx_wdt_pet();
-+ bcm47xx_timer_tick(0);
-+}
-+
-+static void bcm47xx_wdt_pause(void)
-+{
-+ del_timer_sync(&wdt_timer);
-+ bcm47xx_wdt_hw_stop();
-+}
-+
-+static void bcm47xx_wdt_stop(void)
-+{
-+ bcm47xx_wdt_pause();
-+}
-+
-+static int bcm47xx_wdt_settimeout(int new_time)
-+{
-+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+ return -EINVAL;
-+
-+ wdt_time = new_time;
-+ return 0;
-+}
-+
-+static int bcm47xx_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &bcm47xx_wdt_busy))
-+ return -EBUSY;
-+
-+ bcm47xx_wdt_start();
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int bcm47xx_wdt_release(struct inode *inode, struct file *file)
-+{
-+ if (expect_release == 42) {
-+ bcm47xx_wdt_stop();
-+ } else {
-+ printk(KERN_CRIT DRV_NAME
-+ ": Unexpected close, not stopping watchdog!\n");
-+ bcm47xx_wdt_start();
-+ }
-+
-+ clear_bit(0, &bcm47xx_wdt_busy);
-+ expect_release = 0;
-+ return 0;
-+}
-+
-+static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ if (len) {
-+ if (!nowayout) {
-+ size_t i;
-+
-+ expect_release = 0;
-+
-+ for (i = 0; i != len; i++) {
-+ char c;
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+ if (c == 'V')
-+ expect_release = 42;
-+ }
-+ }
-+ bcm47xx_wdt_pet();
-+ }
-+ return len;
-+}
-+
-+static struct watchdog_info bcm47xx_wdt_info = {
-+ .identity = DRV_NAME,
-+ .options = WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING |
-+ WDIOF_MAGICCLOSE,
-+};
-+
-+static long bcm47xx_wdt_ioctl(struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = argp;
-+ int new_value, retval = -EINVAL;;
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ return copy_to_user(argp, &bcm47xx_wdt_info,
-+ sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0;
-+
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ return put_user(0, p);
-+
-+ case WDIOC_SETOPTIONS:
-+ if (get_user(new_value, p))
-+ return -EFAULT;
-+
-+ if (new_value & WDIOS_DISABLECARD) {
-+ bcm47xx_wdt_stop();
-+ retval = 0;
-+ }
-+
-+ if (new_value & WDIOS_ENABLECARD) {
-+ bcm47xx_wdt_start();
-+ retval = 0;
-+ }
-+
-+ return retval;
-+
-+ case WDIOC_KEEPALIVE:
-+ bcm47xx_wdt_pet();
-+ return 0;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if (get_user(new_value, p))
-+ return -EFAULT;
-+
-+ if (bcm47xx_wdt_settimeout(new_value))
-+ return -EINVAL;
-+
-+ bcm47xx_wdt_pet();
-+
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(wdt_time, p);
-+
-+ default:
-+ return -ENOTTY;
-+ }
-+}
-+
-+static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
-+ unsigned long code, void *unused)
-+{
-+ if (code == SYS_DOWN || code == SYS_HALT)
-+ bcm47xx_wdt_stop();
-+ return NOTIFY_DONE;
-+}
-+
-+static const struct file_operations bcm47xx_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = bcm47xx_wdt_ioctl,
-+ .open = bcm47xx_wdt_open,
-+ .release = bcm47xx_wdt_release,
-+ .write = bcm47xx_wdt_write,
-+};
-+
-+static struct miscdevice bcm47xx_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &bcm47xx_wdt_fops,
-+};
-+
-+static struct notifier_block bcm47xx_wdt_notifier = {
-+ .notifier_call = bcm47xx_wdt_notify_sys,
-+};
-+
-+static int __init bcm47xx_wdt_init(void)
-+{
-+ int ret;
-+
-+ if (bcm47xx_wdt_hw_stop() < 0)
-+ return -ENODEV;
-+
-+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+
-+ if (bcm47xx_wdt_settimeout(wdt_time)) {
-+ bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
-+ printk(KERN_INFO DRV_NAME
-+ ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
-+ wdt_time);
-+ }
-+
-+ ret = register_reboot_notifier(&bcm47xx_wdt_notifier);
-+ if (ret)
-+ return ret;
-+
-+ ret = misc_register(&bcm47xx_wdt_miscdev);
-+ if (ret) {
-+ unregister_reboot_notifier(&bcm47xx_wdt_notifier);
-+ return ret;
-+ }
-+
-+ printk(KERN_INFO "BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
-+ wdt_time, nowayout ? ", nowayout" : "");
-+ return 0;
-+}
-+
-+static void __exit bcm47xx_wdt_exit(void)
-+{
-+ if (!nowayout)
-+ bcm47xx_wdt_stop();
-+
-+ misc_deregister(&bcm47xx_wdt_miscdev);
-+
-+ unregister_reboot_notifier(&bcm47xx_wdt_notifier);
-+}
-+
-+module_init(bcm47xx_wdt_init);
-+module_exit(bcm47xx_wdt_exit);
-+
-+MODULE_AUTHOR("Aleksandar Radovanovic");
-+MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch b/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch
deleted file mode 100644
index 05c36517d7..0000000000
--- a/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-the current ssb irq setup (in ssb_mipscore_init) have some problem :
-it configure some device on some irq without checking that the irq is not taken by an other device.
-
-For example in my case PCI host is on irq 0 and IPSEC on irq 3.
-The current code :
-- store in dev->irq that IPSEC irq is 3+2
-- do a set_irq 0->3 on PCI host
-
-But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This cause problem described in [1].
-
-This patch try to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0.
-The previous example become :
-- store in dev->irq that IPSEC irq is 3+2
-- do a set_irq 0->3 on PCI host :
- - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC
-
-
-I also added some code to print the irq configuration before and after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq.
-
-
-[1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES
-
-Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
-
- static inline u32 ssb_irqflag(struct ssb_device *dev)
- {
-- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
-+ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
-+ if (tpsflag)
-+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
-+ else
-+ /* not irq supported */
-+ return 0x3f;
-+}
-+
-+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
-+{
-+ struct ssb_bus *bus = rdev->bus;
-+ int i;
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ struct ssb_device *dev;
-+ dev = &(bus->devices[i]);
-+ if (ssb_irqflag(dev) == irqflag)
-+ return dev;
-+ }
-+ return NULL;
- }
-
- /* Get the MIPS IRQ assignment for a specified device.
- * If unassigned, 0 is returned.
-+ * If disabled, 5 is returned.
-+ * If not supported, 6 is returned.
- */
- unsigned int ssb_mips_irq(struct ssb_device *dev)
- {
- struct ssb_bus *bus = dev->bus;
-+ struct ssb_device *mdev = bus->mipscore.dev;
- u32 irqflag;
- u32 ipsflag;
- u32 tmp;
- unsigned int irq;
-
- irqflag = ssb_irqflag(dev);
-+ if (irqflag == 0x3f)
-+ return 6;
- ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
- for (irq = 1; irq <= 4; irq++) {
- tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
- if (tmp == irqflag)
- break;
- }
-- if (irq == 5)
-- irq = 0;
-+ if (irq == 5) {
-+ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
-+ irq = 0;
-+ }
-
- return irq;
- }
-@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d
- struct ssb_device *mdev = bus->mipscore.dev;
- u32 irqflag = ssb_irqflag(dev);
-
-+ BUG_ON(oldirq == 6);
-+
- dev->irq = irq + 2;
-
-- ssb_dprintk(KERN_INFO PFX
-- "set_irq: core 0x%04x, irq %d => %d\n",
-- dev->id.coreid, oldirq, irq);
- /* clear the old irq */
- if (oldirq == 0)
- ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-- else
-+ else if (oldirq != 5)
- clear_irq(bus, oldirq);
-
- /* assign the new one */
- if (irq == 0) {
- ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
- } else {
-+ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
-+ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
-+ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
-+ struct ssb_device *olddev = find_device(dev, oldipsflag);
-+ if (olddev)
-+ set_irq(olddev, 0);
-+ }
- irqflag <<= ipsflag_irq_shift[irq];
-- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
-+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
- ssb_write32(mdev, SSB_IPSFLAG, irqflag);
- }
-+ ssb_dprintk(KERN_INFO PFX
-+ "set_irq: core 0x%04x, irq %d => %d\n",
-+ dev->id.coreid, oldirq+2, irq+2);
-+}
-+
-+static void print_irq(struct ssb_device *dev, unsigned int irq)
-+{
-+ int i;
-+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-+ ssb_dprintk(KERN_INFO PFX
-+ "core 0x%04x, irq :", dev->id.coreid);
-+ for (i = 0; i <= 6; i++) {
-+ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
-+ }
-+ ssb_dprintk("\n");
-+}
-+
-+static void dump_irq(struct ssb_bus *bus)
-+{
-+ int i;
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ struct ssb_device *dev;
-+ dev = &(bus->devices[i]);
-+ print_irq(dev, ssb_mips_irq(dev));
-+ }
- }
-
- static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
-@@ -197,18 +253,26 @@ void ssb_mipscore_init(struct ssb_mipsco
- else if (bus->chipco.dev)
- ssb_chipco_timing_init(&bus->chipco, ns);
-
-+ dump_irq(bus);
- /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
- for (irq = 2, i = 0; i < bus->nr_devices; i++) {
-+ int mips_irq;
- dev = &(bus->devices[i]);
-- dev->irq = ssb_mips_irq(dev) + 2;
-+ mips_irq = ssb_mips_irq(dev);
-+ if (mips_irq > 4)
-+ dev->irq = 0;
-+ else
-+ dev->irq = mips_irq + 2;
-+ if (dev->irq > 5)
-+ continue;
- switch (dev->id.coreid) {
- case SSB_DEV_USB11_HOST:
- /* shouldn't need a separate irq line for non-4710, most of them have a proper
- * external usb controller on the pci */
- if ((bus->chip_id == 0x4710) && (irq <= 4)) {
- set_irq(dev, irq++);
-- break;
- }
-+ break;
- /* fallthrough */
- case SSB_DEV_PCI:
- case SSB_DEV_ETHERNET:
-@@ -222,6 +286,8 @@ void ssb_mipscore_init(struct ssb_mipsco
- }
- }
- }
-+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
-+ dump_irq(bus);
-
- ssb_mips_serial_init(mcore);
- ssb_mips_flash_detect(mcore);