diff options
author | Hauke Mehrtens <hauke@openwrt.org> | 2013-09-12 22:07:12 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@openwrt.org> | 2013-09-12 22:07:12 +0000 |
commit | 008c011e54b0968cd4c86046a842a980172e62cf (patch) | |
tree | 8da874538b1dd6c3f35282ff1805009cb95b519f /target/linux/brcm47xx/patches-3.8/750-bgmac.patch | |
parent | f372ac28a1d3c6a10a1d97179abe6170ffeebb3f (diff) | |
download | upstream-008c011e54b0968cd4c86046a842a980172e62cf.tar.gz upstream-008c011e54b0968cd4c86046a842a980172e62cf.tar.bz2 upstream-008c011e54b0968cd4c86046a842a980172e62cf.zip |
brcm47xx: remove support for kernel 3.8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37959 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm47xx/patches-3.8/750-bgmac.patch')
-rw-r--r-- | target/linux/brcm47xx/patches-3.8/750-bgmac.patch | 1950 |
1 files changed, 0 insertions, 1950 deletions
diff --git a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch deleted file mode 100644 index 30f32f9514..0000000000 --- a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch +++ /dev/null @@ -1,1950 +0,0 @@ -From dd4544f05469aaaeee891d7dc54d66430344321e Mon Sep 17 00:00:00 2001 -From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 8 Jan 2013 20:06:23 +0000 -Subject: [PATCH] bgmac: driver for GBit MAC core on BCMA bus -MIME-Version: 1.0 -Content-Type: text/plain; charset=utf8 -Content-Transfer-Encoding: 8bit - -BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA -based SoCs have gigabit ethernet provided by the GBit MAC core. This -patch adds driver for such a cores registering itself as a netdev. It -has been tested on a BCM4706 and BCM4718 chipsets. - -In the kernel tree there is already b44 driver which has some common -things with bgmac, however there are many differences that has led to -the decision or writing a new driver: -1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) -2) There is 64bit DMA engine which differs from 32bit one -3) There is no CAM (Content Addressable Memory) in GBit MAC -4) We have 4 TX queues on GBit MAC devices (instead of 1) -5) Many registers have different addresses/values -6) RX header flags are also different - -The driver in it's state is functional how, however there is of course -place for improvements: -1) Supporting more net_device_ops -2) SUpporting more ethtool_ops -3) Unaligned addressing in DMA -4) Writing separated PHY driver - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/bcma/driver_chipcommon_pmu.c | 3 +- - drivers/net/ethernet/broadcom/Kconfig | 9 + - drivers/net/ethernet/broadcom/Makefile | 1 + - drivers/net/ethernet/broadcom/bgmac.c | 1422 +++++++++++++++++++++++++++ - drivers/net/ethernet/broadcom/bgmac.h | 456 +++++++++ - include/linux/bcma/bcma_driver_chipcommon.h | 2 + - 6 files changed, 1892 insertions(+), 1 deletions(-) - create mode 100644 drivers/net/ethernet/broadcom/bgmac.c - create mode 100644 drivers/net/ethernet/broadcom/bgmac.h - ---- a/drivers/net/ethernet/broadcom/Kconfig -+++ b/drivers/net/ethernet/broadcom/Kconfig -@@ -121,4 +121,13 @@ config BNX2X - To compile this driver as a module, choose M here: the module - will be called bnx2x. This is recommended. - -+config BGMAC -+ tristate "BCMA bus GBit core support" -+ depends on BCMA_HOST_SOC && HAS_DMA -+ ---help--- -+ This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. -+ They can be found on BCM47xx SoCs and provide gigabit ethernet. -+ In case of using this driver on BCM4706 it's also requires to enable -+ BCMA_DRIVER_GMAC_CMN to make it work. -+ - endif # NET_VENDOR_BROADCOM ---- a/drivers/net/ethernet/broadcom/Makefile -+++ b/drivers/net/ethernet/broadcom/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o - obj-$(CONFIG_BNX2X) += bnx2x/ - obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_TIGON3) += tg3.o -+obj-$(CONFIG_BGMAC) += bgmac.o ---- /dev/null -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -0,0 +1,1422 @@ -+/* -+ * Driver for (BCM4706)? GBit MAC core on BCMA bus. -+ * -+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bgmac.h" -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/etherdevice.h> -+#include <linux/mii.h> -+#include <linux/interrupt.h> -+#include <linux/dma-mapping.h> -+#include <bcm47xx_nvram.h> -+ -+static const struct bcma_device_id bgmac_bcma_tbl[] = { -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORETABLE_END -+}; -+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); -+ -+static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, -+ u32 value, int timeout) -+{ -+ u32 val; -+ int i; -+ -+ for (i = 0; i < timeout / 10; i++) { -+ val = bcma_read32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ udelay(10); -+ } -+ pr_err("Timeout waiting for reg 0x%X\n", reg); -+ return false; -+} -+ -+/************************************************** -+ * DMA -+ **************************************************/ -+ -+static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) -+{ -+ u32 val; -+ int i; -+ -+ if (!ring->mmio_base) -+ return; -+ -+ /* Suspend DMA TX ring first. -+ * bgmac_wait_value doesn't support waiting for any of few values, so -+ * implement whole loop here. -+ */ -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, -+ BGMAC_DMA_TX_SUSPEND); -+ for (i = 0; i < 10000 / 10; i++) { -+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); -+ val &= BGMAC_DMA_TX_STAT; -+ if (val == BGMAC_DMA_TX_STAT_DISABLED || -+ val == BGMAC_DMA_TX_STAT_IDLEWAIT || -+ val == BGMAC_DMA_TX_STAT_STOPPED) { -+ i = 0; -+ break; -+ } -+ udelay(10); -+ } -+ if (i) -+ bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", -+ ring->mmio_base, val); -+ -+ /* Remove SUSPEND bit */ -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); -+ if (!bgmac_wait_value(bgmac->core, -+ ring->mmio_base + BGMAC_DMA_TX_STATUS, -+ BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, -+ 10000)) { -+ bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", -+ ring->mmio_base); -+ udelay(300); -+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); -+ if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) -+ bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", -+ ring->mmio_base); -+ } -+} -+ -+static void bgmac_dma_tx_enable(struct bgmac *bgmac, -+ struct bgmac_dma_ring *ring) -+{ -+ u32 ctl; -+ -+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); -+ ctl |= BGMAC_DMA_TX_ENABLE; -+ ctl |= BGMAC_DMA_TX_PARITY_DISABLE; -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl); -+} -+ -+static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac, -+ struct bgmac_dma_ring *ring, -+ struct sk_buff *skb) -+{ -+ struct device *dma_dev = bgmac->core->dma_dev; -+ struct net_device *net_dev = bgmac->net_dev; -+ struct bgmac_dma_desc *dma_desc; -+ struct bgmac_slot_info *slot; -+ u32 ctl0, ctl1; -+ int free_slots; -+ -+ if (skb->len > BGMAC_DESC_CTL1_LEN) { -+ bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); -+ goto err_stop_drop; -+ } -+ -+ if (ring->start <= ring->end) -+ free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS; -+ else -+ free_slots = ring->start - ring->end; -+ if (free_slots == 1) { -+ bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); -+ netif_stop_queue(net_dev); -+ return NETDEV_TX_BUSY; -+ } -+ -+ slot = &ring->slots[ring->end]; -+ slot->skb = skb; -+ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, -+ DMA_TO_DEVICE); -+ if (dma_mapping_error(dma_dev, slot->dma_addr)) { -+ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", -+ ring->mmio_base); -+ goto err_stop_drop; -+ } -+ -+ ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF; -+ if (ring->end == ring->num_slots - 1) -+ ctl0 |= BGMAC_DESC_CTL0_EOT; -+ ctl1 = skb->len & BGMAC_DESC_CTL1_LEN; -+ -+ dma_desc = ring->cpu_base; -+ dma_desc += ring->end; -+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr)); -+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr)); -+ dma_desc->ctl0 = cpu_to_le32(ctl0); -+ dma_desc->ctl1 = cpu_to_le32(ctl1); -+ -+ wmb(); -+ -+ /* Increase ring->end to point empty slot. We tell hardware the first -+ * slot it should *not* read. -+ */ -+ if (++ring->end >= BGMAC_TX_RING_SLOTS) -+ ring->end = 0; -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX, -+ ring->end * sizeof(struct bgmac_dma_desc)); -+ -+ /* Always keep one slot free to allow detecting bugged calls. */ -+ if (--free_slots == 1) -+ netif_stop_queue(net_dev); -+ -+ return NETDEV_TX_OK; -+ -+err_stop_drop: -+ netif_stop_queue(net_dev); -+ dev_kfree_skb(skb); -+ return NETDEV_TX_OK; -+} -+ -+/* Free transmitted packets */ -+static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) -+{ -+ struct device *dma_dev = bgmac->core->dma_dev; -+ int empty_slot; -+ bool freed = false; -+ -+ /* The last slot that hardware didn't consume yet */ -+ empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); -+ empty_slot &= BGMAC_DMA_TX_STATDPTR; -+ empty_slot /= sizeof(struct bgmac_dma_desc); -+ -+ while (ring->start != empty_slot) { -+ struct bgmac_slot_info *slot = &ring->slots[ring->start]; -+ -+ if (slot->skb) { -+ /* Unmap no longer used buffer */ -+ dma_unmap_single(dma_dev, slot->dma_addr, -+ slot->skb->len, DMA_TO_DEVICE); -+ slot->dma_addr = 0; -+ -+ /* Free memory! :) */ -+ dev_kfree_skb(slot->skb); -+ slot->skb = NULL; -+ } else { -+ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n", -+ ring->start, ring->end); -+ } -+ -+ if (++ring->start >= BGMAC_TX_RING_SLOTS) -+ ring->start = 0; -+ freed = true; -+ } -+ -+ if (freed && netif_queue_stopped(bgmac->net_dev)) -+ netif_wake_queue(bgmac->net_dev); -+} -+ -+static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) -+{ -+ if (!ring->mmio_base) -+ return; -+ -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); -+ if (!bgmac_wait_value(bgmac->core, -+ ring->mmio_base + BGMAC_DMA_RX_STATUS, -+ BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, -+ 10000)) -+ bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", -+ ring->mmio_base); -+} -+ -+static void bgmac_dma_rx_enable(struct bgmac *bgmac, -+ struct bgmac_dma_ring *ring) -+{ -+ u32 ctl; -+ -+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); -+ ctl &= BGMAC_DMA_RX_ADDREXT_MASK; -+ ctl |= BGMAC_DMA_RX_ENABLE; -+ ctl |= BGMAC_DMA_RX_PARITY_DISABLE; -+ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; -+ ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT; -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl); -+} -+ -+static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, -+ struct bgmac_slot_info *slot) -+{ -+ struct device *dma_dev = bgmac->core->dma_dev; -+ struct bgmac_rx_header *rx; -+ -+ /* Alloc skb */ -+ slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); -+ if (!slot->skb) { -+ bgmac_err(bgmac, "Allocation of skb failed!\n"); -+ return -ENOMEM; -+ } -+ -+ /* Poison - if everything goes fine, hardware will overwrite it */ -+ rx = (struct bgmac_rx_header *)slot->skb->data; -+ rx->len = cpu_to_le16(0xdead); -+ rx->flags = cpu_to_le16(0xbeef); -+ -+ /* Map skb for the DMA */ -+ slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, -+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); -+ if (dma_mapping_error(dma_dev, slot->dma_addr)) { -+ bgmac_err(bgmac, "DMA mapping error\n"); -+ return -ENOMEM; -+ } -+ if (slot->dma_addr & 0xC0000000) -+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); -+ -+ return 0; -+} -+ -+static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, -+ int weight) -+{ -+ u32 end_slot; -+ int handled = 0; -+ -+ end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS); -+ end_slot &= BGMAC_DMA_RX_STATDPTR; -+ end_slot /= sizeof(struct bgmac_dma_desc); -+ -+ ring->end = end_slot; -+ -+ while (ring->start != ring->end) { -+ struct device *dma_dev = bgmac->core->dma_dev; -+ struct bgmac_slot_info *slot = &ring->slots[ring->start]; -+ struct sk_buff *skb = slot->skb; -+ struct sk_buff *new_skb; -+ struct bgmac_rx_header *rx; -+ u16 len, flags; -+ -+ /* Unmap buffer to make it accessible to the CPU */ -+ dma_sync_single_for_cpu(dma_dev, slot->dma_addr, -+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); -+ -+ /* Get info from the header */ -+ rx = (struct bgmac_rx_header *)skb->data; -+ len = le16_to_cpu(rx->len); -+ flags = le16_to_cpu(rx->flags); -+ -+ /* Check for poison and drop or pass the packet */ -+ if (len == 0xdead && flags == 0xbeef) { -+ bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", -+ ring->start); -+ } else { -+ new_skb = netdev_alloc_skb(bgmac->net_dev, len); -+ if (new_skb) { -+ skb_put(new_skb, len); -+ skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, -+ new_skb->data, -+ len); -+ new_skb->protocol = -+ eth_type_trans(new_skb, bgmac->net_dev); -+ netif_receive_skb(new_skb); -+ handled++; -+ } else { -+ bgmac->net_dev->stats.rx_dropped++; -+ bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n"); -+ } -+ -+ /* Poison the old skb */ -+ rx->len = cpu_to_le16(0xdead); -+ rx->flags = cpu_to_le16(0xbeef); -+ } -+ -+ /* Make it back accessible to the hardware */ -+ dma_sync_single_for_device(dma_dev, slot->dma_addr, -+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); -+ -+ if (++ring->start >= BGMAC_RX_RING_SLOTS) -+ ring->start = 0; -+ -+ if (handled >= weight) /* Should never be greater */ -+ break; -+ } -+ -+ return handled; -+} -+ -+/* Does ring support unaligned addressing? */ -+static bool bgmac_dma_unaligned(struct bgmac *bgmac, -+ struct bgmac_dma_ring *ring, -+ enum bgmac_dma_ring_type ring_type) -+{ -+ switch (ring_type) { -+ case BGMAC_DMA_RING_TX: -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, -+ 0xff0); -+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO)) -+ return true; -+ break; -+ case BGMAC_DMA_RING_RX: -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, -+ 0xff0); -+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO)) -+ return true; -+ break; -+ } -+ return false; -+} -+ -+static void bgmac_dma_ring_free(struct bgmac *bgmac, -+ struct bgmac_dma_ring *ring) -+{ -+ struct device *dma_dev = bgmac->core->dma_dev; -+ struct bgmac_slot_info *slot; -+ int size; -+ int i; -+ -+ for (i = 0; i < ring->num_slots; i++) { -+ slot = &ring->slots[i]; -+ if (slot->skb) { -+ if (slot->dma_addr) -+ dma_unmap_single(dma_dev, slot->dma_addr, -+ slot->skb->len, DMA_TO_DEVICE); -+ dev_kfree_skb(slot->skb); -+ } -+ } -+ -+ if (ring->cpu_base) { -+ /* Free ring of descriptors */ -+ size = ring->num_slots * sizeof(struct bgmac_dma_desc); -+ dma_free_coherent(dma_dev, size, ring->cpu_base, -+ ring->dma_base); -+ } -+} -+ -+static void bgmac_dma_free(struct bgmac *bgmac) -+{ -+ int i; -+ -+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) -+ bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]); -+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) -+ bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]); -+} -+ -+static int bgmac_dma_alloc(struct bgmac *bgmac) -+{ -+ struct device *dma_dev = bgmac->core->dma_dev; -+ struct bgmac_dma_ring *ring; -+ static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, -+ BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; -+ int size; /* ring size: different for Tx and Rx */ -+ int err; -+ int i; -+ -+ BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); -+ BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); -+ -+ if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { -+ bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); -+ return -ENOTSUPP; -+ } -+ -+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { -+ ring = &bgmac->tx_ring[i]; -+ ring->num_slots = BGMAC_TX_RING_SLOTS; -+ ring->mmio_base = ring_base[i]; -+ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX)) -+ bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", -+ ring->mmio_base); -+ -+ /* Alloc ring of descriptors */ -+ size = ring->num_slots * sizeof(struct bgmac_dma_desc); -+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size, -+ &ring->dma_base, -+ GFP_KERNEL); -+ if (!ring->cpu_base) { -+ bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", -+ ring->mmio_base); -+ goto err_dma_free; -+ } -+ if (ring->dma_base & 0xC0000000) -+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); -+ -+ /* No need to alloc TX slots yet */ -+ } -+ -+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { -+ ring = &bgmac->rx_ring[i]; -+ ring->num_slots = BGMAC_RX_RING_SLOTS; -+ ring->mmio_base = ring_base[i]; -+ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX)) -+ bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", -+ ring->mmio_base); -+ -+ /* Alloc ring of descriptors */ -+ size = ring->num_slots * sizeof(struct bgmac_dma_desc); -+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size, -+ &ring->dma_base, -+ GFP_KERNEL); -+ if (!ring->cpu_base) { -+ bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", -+ ring->mmio_base); -+ err = -ENOMEM; -+ goto err_dma_free; -+ } -+ if (ring->dma_base & 0xC0000000) -+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); -+ -+ /* Alloc RX slots */ -+ for (i = 0; i < ring->num_slots; i++) { -+ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]); -+ if (err) { -+ bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); -+ goto err_dma_free; -+ } -+ } -+ } -+ -+ return 0; -+ -+err_dma_free: -+ bgmac_dma_free(bgmac); -+ return -ENOMEM; -+} -+ -+static void bgmac_dma_init(struct bgmac *bgmac) -+{ -+ struct bgmac_dma_ring *ring; -+ struct bgmac_dma_desc *dma_desc; -+ u32 ctl0, ctl1; -+ int i; -+ -+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { -+ ring = &bgmac->tx_ring[i]; -+ -+ /* We don't implement unaligned addressing, so enable first */ -+ bgmac_dma_tx_enable(bgmac, ring); -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, -+ lower_32_bits(ring->dma_base)); -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI, -+ upper_32_bits(ring->dma_base)); -+ -+ ring->start = 0; -+ ring->end = 0; /* Points the slot that should *not* be read */ -+ } -+ -+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { -+ ring = &bgmac->rx_ring[i]; -+ -+ /* We don't implement unaligned addressing, so enable first */ -+ bgmac_dma_rx_enable(bgmac, ring); -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, -+ lower_32_bits(ring->dma_base)); -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI, -+ upper_32_bits(ring->dma_base)); -+ -+ for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots; -+ i++, dma_desc++) { -+ ctl0 = ctl1 = 0; -+ -+ if (i == ring->num_slots - 1) -+ ctl0 |= BGMAC_DESC_CTL0_EOT; -+ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; -+ /* Is there any BGMAC device that requires extension? */ -+ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) & -+ * B43_DMA64_DCTL1_ADDREXT_MASK; -+ */ -+ -+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr)); -+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr)); -+ dma_desc->ctl0 = cpu_to_le32(ctl0); -+ dma_desc->ctl1 = cpu_to_le32(ctl1); -+ } -+ -+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, -+ ring->num_slots * sizeof(struct bgmac_dma_desc)); -+ -+ ring->start = 0; -+ ring->end = 0; -+ } -+} -+ -+/************************************************** -+ * PHY ops -+ **************************************************/ -+ -+u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) -+{ -+ struct bcma_device *core; -+ u16 phy_access_addr; -+ u16 phy_ctl_addr; -+ u32 tmp; -+ -+ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); -+ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); -+ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); -+ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); -+ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); -+ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); -+ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); -+ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); -+ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); -+ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); -+ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); -+ -+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bgmac->core->bus->drv_gmac_cmn.core; -+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -+ } else { -+ core = bgmac->core; -+ phy_access_addr = BGMAC_PHY_ACCESS; -+ phy_ctl_addr = BGMAC_PHY_CNTL; -+ } -+ -+ tmp = bcma_read32(core, phy_ctl_addr); -+ tmp &= ~BGMAC_PC_EPA_MASK; -+ tmp |= phyaddr; -+ bcma_write32(core, phy_ctl_addr, tmp); -+ -+ tmp = BGMAC_PA_START; -+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -+ tmp |= reg << BGMAC_PA_REG_SHIFT; -+ bcma_write32(core, phy_access_addr, tmp); -+ -+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { -+ bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", -+ phyaddr, reg); -+ return 0xffff; -+ } -+ -+ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ -+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) -+{ -+ struct bcma_device *core; -+ u16 phy_access_addr; -+ u16 phy_ctl_addr; -+ u32 tmp; -+ -+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { -+ core = bgmac->core->bus->drv_gmac_cmn.core; -+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; -+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; -+ } else { -+ core = bgmac->core; -+ phy_access_addr = BGMAC_PHY_ACCESS; -+ phy_ctl_addr = BGMAC_PHY_CNTL; -+ } -+ -+ tmp = bcma_read32(core, phy_ctl_addr); -+ tmp &= ~BGMAC_PC_EPA_MASK; -+ tmp |= phyaddr; -+ bcma_write32(core, phy_ctl_addr, tmp); -+ -+ bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); -+ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) -+ bgmac_warn(bgmac, "Error setting MDIO int\n"); -+ -+ tmp = BGMAC_PA_START; -+ tmp |= BGMAC_PA_WRITE; -+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; -+ tmp |= reg << BGMAC_PA_REG_SHIFT; -+ tmp |= value; -+ bcma_write32(core, phy_access_addr, tmp); -+ -+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) -+ bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", -+ phyaddr, reg); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ -+static void bgmac_phy_force(struct bgmac *bgmac) -+{ -+ u16 ctl; -+ u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB | -+ BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX); -+ -+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) -+ return; -+ -+ if (bgmac->autoneg) -+ return; -+ -+ ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL); -+ ctl &= mask; -+ if (bgmac->full_duplex) -+ ctl |= BGMAC_PHY_CTL_DUPLEX; -+ if (bgmac->speed == BGMAC_SPEED_100) -+ ctl |= BGMAC_PHY_CTL_SPEED_100; -+ else if (bgmac->speed == BGMAC_SPEED_1000) -+ ctl |= BGMAC_PHY_CTL_SPEED_1000; -+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */ -+static void bgmac_phy_advertise(struct bgmac *bgmac) -+{ -+ u16 adv; -+ -+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) -+ return; -+ -+ if (!bgmac->autoneg) -+ return; -+ -+ /* Adv selected 10/100 speeds */ -+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV); -+ adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL | -+ BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL); -+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) -+ adv |= BGMAC_PHY_ADV_10HALF; -+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) -+ adv |= BGMAC_PHY_ADV_100HALF; -+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) -+ adv |= BGMAC_PHY_ADV_10FULL; -+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) -+ adv |= BGMAC_PHY_ADV_100FULL; -+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv); -+ -+ /* Adv selected 1000 speeds */ -+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2); -+ adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL); -+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) -+ adv |= BGMAC_PHY_ADV2_1000HALF; -+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) -+ adv |= BGMAC_PHY_ADV2_1000FULL; -+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv); -+ -+ /* Restart */ -+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, -+ bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) | -+ BGMAC_PHY_CTL_RESTART); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ -+static void bgmac_phy_init(struct bgmac *bgmac) -+{ -+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; -+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; -+ u8 i; -+ -+ if (ci->id == BCMA_CHIP_ID_BCM5356) { -+ for (i = 0; i < 5; i++) { -+ bgmac_phy_write(bgmac, i, 0x1f, 0x008b); -+ bgmac_phy_write(bgmac, i, 0x15, 0x0100); -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -+ bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -+ } -+ } -+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || -+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || -+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { -+ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); -+ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); -+ for (i = 0; i < 5; i++) { -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -+ bgmac_phy_write(bgmac, i, 0x16, 0x5284); -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -+ bgmac_phy_write(bgmac, i, 0x17, 0x0010); -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); -+ bgmac_phy_write(bgmac, i, 0x16, 0x5296); -+ bgmac_phy_write(bgmac, i, 0x17, 0x1073); -+ bgmac_phy_write(bgmac, i, 0x17, 0x9073); -+ bgmac_phy_write(bgmac, i, 0x16, 0x52b6); -+ bgmac_phy_write(bgmac, i, 0x17, 0x9273); -+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); -+ } -+ } -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ -+static void bgmac_phy_reset(struct bgmac *bgmac) -+{ -+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) -+ return; -+ -+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, -+ BGMAC_PHY_CTL_RESET); -+ udelay(100); -+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & -+ BGMAC_PHY_CTL_RESET) -+ bgmac_err(bgmac, "PHY reset failed\n"); -+ bgmac_phy_init(bgmac); -+} -+ -+/************************************************** -+ * Chip ops -+ **************************************************/ -+ -+/* TODO: can we just drop @force? Can we don't reset MAC at all if there is -+ * nothing to change? Try if after stabilizng driver. -+ */ -+static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, -+ bool force) -+{ -+ u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); -+ u32 new_val = (cmdcfg & mask) | set; -+ -+ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR); -+ udelay(2); -+ -+ if (new_val != cmdcfg || force) -+ bgmac_write(bgmac, BGMAC_CMDCFG, new_val); -+ -+ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR); -+ udelay(2); -+} -+ -+#if 0 /* We don't use that regs yet */ -+static void bgmac_chip_stats_update(struct bgmac *bgmac) -+{ -+ int i; -+ -+ if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { -+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) -+ bgmac->mib_tx_regs[i] = -+ bgmac_read(bgmac, -+ BGMAC_TX_GOOD_OCTETS + (i * 4)); -+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) -+ bgmac->mib_rx_regs[i] = -+ bgmac_read(bgmac, -+ BGMAC_RX_GOOD_OCTETS + (i * 4)); -+ } -+ -+ /* TODO: what else? how to handle BCM4706? Specs are needed */ -+} -+#endif -+ -+static void bgmac_clear_mib(struct bgmac *bgmac) -+{ -+ int i; -+ -+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) -+ return; -+ -+ bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); -+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) -+ bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4)); -+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) -+ bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4)); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ -+static void bgmac_speed(struct bgmac *bgmac, int speed) -+{ -+ u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); -+ u32 set = 0; -+ -+ if (speed & BGMAC_SPEED_10) -+ set |= BGMAC_CMDCFG_ES_10; -+ if (speed & BGMAC_SPEED_100) -+ set |= BGMAC_CMDCFG_ES_100; -+ if (speed & BGMAC_SPEED_1000) -+ set |= BGMAC_CMDCFG_ES_1000; -+ if (!bgmac->full_duplex) -+ set |= BGMAC_CMDCFG_HD; -+ bgmac_cmdcfg_maskset(bgmac, mask, set, true); -+} -+ -+static void bgmac_miiconfig(struct bgmac *bgmac) -+{ -+ u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> -+ BGMAC_DS_MM_SHIFT; -+ if (imode == 0 || imode == 1) { -+ if (bgmac->autoneg) -+ bgmac_speed(bgmac, BGMAC_SPEED_100); -+ else -+ bgmac_speed(bgmac, bgmac->speed); -+ } -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ -+static void bgmac_chip_reset(struct bgmac *bgmac) -+{ -+ struct bcma_device *core = bgmac->core; -+ struct bcma_bus *bus = core->bus; -+ struct bcma_chipinfo *ci = &bus->chipinfo; -+ u32 flags = 0; -+ u32 iost; -+ int i; -+ -+ if (bcma_core_is_enabled(core)) { -+ if (!bgmac->stats_grabbed) { -+ /* bgmac_chip_stats_update(bgmac); */ -+ bgmac->stats_grabbed = true; -+ } -+ -+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) -+ bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); -+ -+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); -+ udelay(1); -+ -+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) -+ bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]); -+ -+ /* TODO: Clear software multicast filter list */ -+ } -+ -+ iost = bcma_aread32(core, BCMA_IOST); -+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) || -+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || -+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) -+ iost &= ~BGMAC_BCMA_IOST_ATTACHED; -+ -+ if (iost & BGMAC_BCMA_IOST_ATTACHED) { -+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN; -+ if (!bgmac->has_robosw) -+ flags |= BGMAC_BCMA_IOCTL_SW_RESET; -+ } -+ -+ bcma_core_enable(core, flags); -+ -+ if (core->id.rev > 2) { -+ bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8); -+ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24, -+ 1000); -+ } -+ -+ if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 || -+ ci->id == BCMA_CHIP_ID_BCM53572) { -+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; -+ u8 et_swtype = 0; -+ u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | -+ BGMAC_CHIPCTL_1_IF_TYPE_RMII; -+ char buf[2]; -+ -+ if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) { -+ if (kstrtou8(buf, 0, &et_swtype)) -+ bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", -+ buf); -+ et_swtype &= 0x0f; -+ et_swtype <<= 4; -+ sw_type = et_swtype; -+ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { -+ sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; -+ } else if (0) { -+ /* TODO */ -+ } -+ bcma_chipco_chipctl_maskset(cc, 1, -+ ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | -+ BGMAC_CHIPCTL_1_SW_TYPE_MASK), -+ sw_type); -+ } -+ -+ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) -+ bcma_awrite32(core, BCMA_IOCTL, -+ bcma_aread32(core, BCMA_IOCTL) & -+ ~BGMAC_BCMA_IOCTL_SW_RESET); -+ -+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset -+ * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine -+ * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to -+ * be keps until taking MAC out of the reset. -+ */ -+ bgmac_cmdcfg_maskset(bgmac, -+ ~(BGMAC_CMDCFG_TE | -+ BGMAC_CMDCFG_RE | -+ BGMAC_CMDCFG_RPI | -+ BGMAC_CMDCFG_TAI | -+ BGMAC_CMDCFG_HD | -+ BGMAC_CMDCFG_ML | -+ BGMAC_CMDCFG_CFE | -+ BGMAC_CMDCFG_RL | -+ BGMAC_CMDCFG_RED | -+ BGMAC_CMDCFG_PE | -+ BGMAC_CMDCFG_TPI | -+ BGMAC_CMDCFG_PAD_EN | -+ BGMAC_CMDCFG_PF), -+ BGMAC_CMDCFG_PROM | -+ BGMAC_CMDCFG_NLC | -+ BGMAC_CMDCFG_CFE | -+ BGMAC_CMDCFG_SR, -+ false); -+ -+ bgmac_clear_mib(bgmac); -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT) -+ bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, -+ BCMA_GMAC_CMN_PC_MTE); -+ else -+ bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); -+ bgmac_miiconfig(bgmac); -+ bgmac_phy_init(bgmac); -+ -+ bgmac->int_status = 0; -+} -+ -+static void bgmac_chip_intrs_on(struct bgmac *bgmac) -+{ -+ bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask); -+} -+ -+static void bgmac_chip_intrs_off(struct bgmac *bgmac) -+{ -+ bgmac_write(bgmac, BGMAC_INT_MASK, 0); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ -+static void bgmac_enable(struct bgmac *bgmac) -+{ -+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; -+ u32 cmdcfg; -+ u32 mode; -+ u32 rxq_ctl; -+ u32 fl_ctl; -+ u16 bp_clk; -+ u8 mdp; -+ -+ cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); -+ bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), -+ BGMAC_CMDCFG_SR, true); -+ udelay(2); -+ cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; -+ bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); -+ -+ mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> -+ BGMAC_DS_MM_SHIFT; -+ if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) -+ bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); -+ if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) -+ bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, -+ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); -+ -+ switch (ci->id) { -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: -+ case BCMA_CHIP_ID_BCM53572: -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM47162: -+ fl_ctl = 0x03cb04cb; -+ if (ci->id == BCMA_CHIP_ID_BCM5357 || -+ ci->id == BCMA_CHIP_ID_BCM4749 || -+ ci->id == BCMA_CHIP_ID_BCM53572) -+ fl_ctl = 0x2300e1; -+ bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); -+ bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); -+ break; -+ } -+ -+ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); -+ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; -+ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000; -+ mdp = (bp_clk * 128 / 1000) - 3; -+ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); -+ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); -+} -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ -+static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) -+{ -+ struct bgmac_dma_ring *ring; -+ u8 *mac = bgmac->net_dev->dev_addr; -+ u32 tmp; -+ int i; -+ -+ /* 1 interrupt per received frame */ -+ bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); -+ -+ /* Enable 802.3x tx flow control (honor received PAUSE frames) */ -+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); -+ -+ if (bgmac->net_dev->flags & IFF_PROMISC) -+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); -+ else -+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); -+ -+ /* Set MAC addr */ -+ tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; -+ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); -+ tmp = (mac[4] << 8) | mac[5]; -+ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); -+ -+ if (bgmac->loopback) -+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); -+ else -+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); -+ -+ bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); -+ -+ if (!bgmac->autoneg) { -+ bgmac_speed(bgmac, bgmac->speed); -+ bgmac_phy_force(bgmac); -+ } else if (bgmac->speed) { /* if there is anything to adv */ -+ bgmac_phy_advertise(bgmac); -+ } -+ -+ if (full_init) { -+ bgmac_dma_init(bgmac); -+ if (1) /* FIXME: is there any case we don't want IRQs? */ -+ bgmac_chip_intrs_on(bgmac); -+ } else { -+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { -+ ring = &bgmac->rx_ring[i]; -+ bgmac_dma_rx_enable(bgmac, ring); -+ } -+ } -+ -+ bgmac_enable(bgmac); -+} -+ -+static irqreturn_t bgmac_interrupt(int irq, void *dev_id) -+{ -+ struct bgmac *bgmac = netdev_priv(dev_id); -+ -+ u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS); -+ int_status &= bgmac->int_mask; -+ -+ if (!int_status) -+ return IRQ_NONE; -+ -+ /* Ack */ -+ bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); -+ -+ /* Disable new interrupts until handling existing ones */ -+ bgmac_chip_intrs_off(bgmac); -+ -+ bgmac->int_status = int_status; -+ -+ napi_schedule(&bgmac->napi); -+ -+ return IRQ_HANDLED; -+} -+ -+static int bgmac_poll(struct napi_struct *napi, int weight) -+{ -+ struct bgmac *bgmac = container_of(napi, struct bgmac, napi); -+ struct bgmac_dma_ring *ring; -+ int handled = 0; -+ -+ if (bgmac->int_status & BGMAC_IS_TX0) { -+ ring = &bgmac->tx_ring[0]; -+ bgmac_dma_tx_free(bgmac, ring); -+ bgmac->int_status &= ~BGMAC_IS_TX0; -+ } -+ -+ if (bgmac->int_status & BGMAC_IS_RX) { -+ ring = &bgmac->rx_ring[0]; -+ handled += bgmac_dma_rx_read(bgmac, ring, weight); -+ bgmac->int_status &= ~BGMAC_IS_RX; -+ } -+ -+ if (bgmac->int_status) { -+ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); -+ bgmac->int_status = 0; -+ } -+ -+ if (handled < weight) -+ napi_complete(napi); -+ -+ bgmac_chip_intrs_on(bgmac); -+ -+ return handled; -+} -+ -+/************************************************** -+ * net_device_ops -+ **************************************************/ -+ -+static int bgmac_open(struct net_device *net_dev) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ int err = 0; -+ -+ bgmac_chip_reset(bgmac); -+ /* Specs say about reclaiming rings here, but we do that in DMA init */ -+ bgmac_chip_init(bgmac, true); -+ -+ err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, -+ KBUILD_MODNAME, net_dev); -+ if (err < 0) { -+ bgmac_err(bgmac, "IRQ request error: %d!\n", err); -+ goto err_out; -+ } -+ napi_enable(&bgmac->napi); -+ -+ netif_carrier_on(net_dev); -+ -+err_out: -+ return err; -+} -+ -+static int bgmac_stop(struct net_device *net_dev) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ -+ netif_carrier_off(net_dev); -+ -+ napi_disable(&bgmac->napi); -+ bgmac_chip_intrs_off(bgmac); -+ free_irq(bgmac->core->irq, net_dev); -+ -+ bgmac_chip_reset(bgmac); -+ -+ return 0; -+} -+ -+static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, -+ struct net_device *net_dev) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ struct bgmac_dma_ring *ring; -+ -+ /* No QOS support yet */ -+ ring = &bgmac->tx_ring[0]; -+ return bgmac_dma_tx_add(bgmac, ring, skb); -+} -+ -+static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ struct mii_ioctl_data *data = if_mii(ifr); -+ -+ switch (cmd) { -+ case SIOCGMIIPHY: -+ data->phy_id = bgmac->phyaddr; -+ /* fallthru */ -+ case SIOCGMIIREG: -+ if (!netif_running(net_dev)) -+ return -EAGAIN; -+ data->val_out = bgmac_phy_read(bgmac, data->phy_id, -+ data->reg_num & 0x1f); -+ return 0; -+ case SIOCSMIIREG: -+ if (!netif_running(net_dev)) -+ return -EAGAIN; -+ bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, -+ data->val_in); -+ return 0; -+ default: -+ return -EOPNOTSUPP; -+ } -+} -+ -+static const struct net_device_ops bgmac_netdev_ops = { -+ .ndo_open = bgmac_open, -+ .ndo_stop = bgmac_stop, -+ .ndo_start_xmit = bgmac_start_xmit, -+ .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ -+ .ndo_do_ioctl = bgmac_ioctl, -+}; -+ -+/************************************************** -+ * ethtool_ops -+ **************************************************/ -+ -+static int bgmac_get_settings(struct net_device *net_dev, -+ struct ethtool_cmd *cmd) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ -+ cmd->supported = SUPPORTED_10baseT_Half | -+ SUPPORTED_10baseT_Full | -+ SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_1000baseT_Half | -+ SUPPORTED_1000baseT_Full | -+ SUPPORTED_Autoneg; -+ -+ if (bgmac->autoneg) { -+ WARN_ON(cmd->advertising); -+ if (bgmac->full_duplex) { -+ if (bgmac->speed & BGMAC_SPEED_10) -+ cmd->advertising |= ADVERTISED_10baseT_Full; -+ if (bgmac->speed & BGMAC_SPEED_100) -+ cmd->advertising |= ADVERTISED_100baseT_Full; -+ if (bgmac->speed & BGMAC_SPEED_1000) -+ cmd->advertising |= ADVERTISED_1000baseT_Full; -+ } else { -+ if (bgmac->speed & BGMAC_SPEED_10) -+ cmd->advertising |= ADVERTISED_10baseT_Half; -+ if (bgmac->speed & BGMAC_SPEED_100) -+ cmd->advertising |= ADVERTISED_100baseT_Half; -+ if (bgmac->speed & BGMAC_SPEED_1000) -+ cmd->advertising |= ADVERTISED_1000baseT_Half; -+ } -+ } else { -+ switch (bgmac->speed) { -+ case BGMAC_SPEED_10: -+ ethtool_cmd_speed_set(cmd, SPEED_10); -+ break; -+ case BGMAC_SPEED_100: -+ ethtool_cmd_speed_set(cmd, SPEED_100); -+ break; -+ case BGMAC_SPEED_1000: -+ ethtool_cmd_speed_set(cmd, SPEED_1000); -+ break; -+ } -+ } -+ -+ cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; -+ -+ cmd->autoneg = bgmac->autoneg; -+ -+ return 0; -+} -+ -+#if 0 -+static int bgmac_set_settings(struct net_device *net_dev, -+ struct ethtool_cmd *cmd) -+{ -+ struct bgmac *bgmac = netdev_priv(net_dev); -+ -+ return -1; -+} -+#endif -+ -+static void bgmac_get_drvinfo(struct net_device *net_dev, -+ struct ethtool_drvinfo *info) -+{ -+ strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); -+ strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); -+} -+ -+static const struct ethtool_ops bgmac_ethtool_ops = { -+ .get_settings = bgmac_get_settings, -+ .get_drvinfo = bgmac_get_drvinfo, -+}; -+ -+/************************************************** -+ * BCMA bus ops -+ **************************************************/ -+ -+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ -+static int bgmac_probe(struct bcma_device *core) -+{ -+ struct net_device *net_dev; -+ struct bgmac *bgmac; -+ struct ssb_sprom *sprom = &core->bus->sprom; -+ u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; -+ int err; -+ -+ /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ -+ if (core->core_unit > 1) { -+ pr_err("Unsupported core_unit %d\n", core->core_unit); -+ return -ENOTSUPP; -+ } -+ -+ /* Allocation and references */ -+ net_dev = alloc_etherdev(sizeof(*bgmac)); -+ if (!net_dev) -+ return -ENOMEM; -+ net_dev->netdev_ops = &bgmac_netdev_ops; -+ net_dev->irq = core->irq; -+ SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops); -+ bgmac = netdev_priv(net_dev); -+ bgmac->net_dev = net_dev; -+ bgmac->core = core; -+ bcma_set_drvdata(core, bgmac); -+ -+ /* Defaults */ -+ bgmac->autoneg = true; -+ bgmac->full_duplex = true; -+ bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000; -+ memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); -+ -+ /* On BCM4706 we need common core to access PHY */ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && -+ !core->bus->drv_gmac_cmn.core) { -+ bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); -+ err = -ENODEV; -+ goto err_netdev_free; -+ } -+ bgmac->cmn = core->bus->drv_gmac_cmn.core; -+ -+ bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : -+ sprom->et0phyaddr; -+ bgmac->phyaddr &= BGMAC_PHY_MASK; -+ if (bgmac->phyaddr == BGMAC_PHY_MASK) { -+ bgmac_err(bgmac, "No PHY found\n"); -+ err = -ENODEV; -+ goto err_netdev_free; -+ } -+ bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, -+ bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); -+ -+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { -+ bgmac_err(bgmac, "PCI setup not implemented\n"); -+ err = -ENOTSUPP; -+ goto err_netdev_free; -+ } -+ -+ bgmac_chip_reset(bgmac); -+ -+ err = bgmac_dma_alloc(bgmac); -+ if (err) { -+ bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); -+ goto err_netdev_free; -+ } -+ -+ bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; -+ if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) -+ bgmac->int_mask &= ~BGMAC_IS_TX_MASK; -+ -+ /* TODO: reset the external phy. Specs are needed */ -+ bgmac_phy_reset(bgmac); -+ -+ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & -+ BGMAC_BFL_ENETROBO); -+ if (bgmac->has_robosw) -+ bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); -+ -+ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) -+ bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); -+ -+ err = register_netdev(bgmac->net_dev); -+ if (err) { -+ bgmac_err(bgmac, "Cannot register net device\n"); -+ err = -ENOTSUPP; -+ goto err_dma_free; -+ } -+ -+ netif_carrier_off(net_dev); -+ -+ netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); -+ -+ return 0; -+ -+err_dma_free: -+ bgmac_dma_free(bgmac); -+ -+err_netdev_free: -+ bcma_set_drvdata(core, NULL); -+ free_netdev(net_dev); -+ -+ return err; -+} -+ -+static void bgmac_remove(struct bcma_device *core) -+{ -+ struct bgmac *bgmac = bcma_get_drvdata(core); -+ -+ netif_napi_del(&bgmac->napi); -+ unregister_netdev(bgmac->net_dev); -+ bgmac_dma_free(bgmac); -+ bcma_set_drvdata(core, NULL); -+ free_netdev(bgmac->net_dev); -+} -+ -+static struct bcma_driver bgmac_bcma_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = bgmac_bcma_tbl, -+ .probe = bgmac_probe, -+ .remove = bgmac_remove, -+}; -+ -+static int __init bgmac_init(void) -+{ -+ int err; -+ -+ err = bcma_driver_register(&bgmac_bcma_driver); -+ if (err) -+ return err; -+ pr_info("Broadcom 47xx GBit MAC driver loaded\n"); -+ -+ return 0; -+} -+ -+static void __exit bgmac_exit(void) -+{ -+ bcma_driver_unregister(&bgmac_bcma_driver); -+} -+ -+module_init(bgmac_init) -+module_exit(bgmac_exit) -+ -+MODULE_AUTHOR("Rafał Miłecki"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -0,0 +1,456 @@ -+#ifndef _BGMAC_H -+#define _BGMAC_H -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#define bgmac_err(bgmac, fmt, ...) \ -+ dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) -+#define bgmac_warn(bgmac, fmt, ...) \ -+ dev_warn(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) -+#define bgmac_info(bgmac, fmt, ...) \ -+ dev_info(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) -+#define bgmac_dbg(bgmac, fmt, ...) \ -+ dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) -+ -+#include <linux/bcma/bcma.h> -+#include <linux/netdevice.h> -+ -+#define BGMAC_DEV_CTL 0x000 -+#define BGMAC_DC_TSM 0x00000002 -+#define BGMAC_DC_CFCO 0x00000004 -+#define BGMAC_DC_RLSS 0x00000008 -+#define BGMAC_DC_MROR 0x00000010 -+#define BGMAC_DC_FCM_MASK 0x00000060 -+#define BGMAC_DC_FCM_SHIFT 5 -+#define BGMAC_DC_NAE 0x00000080 -+#define BGMAC_DC_TF 0x00000100 -+#define BGMAC_DC_RDS_MASK 0x00030000 -+#define BGMAC_DC_RDS_SHIFT 16 -+#define BGMAC_DC_TDS_MASK 0x000c0000 -+#define BGMAC_DC_TDS_SHIFT 18 -+#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */ -+#define BGMAC_DS_RBF 0x00000001 -+#define BGMAC_DS_RDF 0x00000002 -+#define BGMAC_DS_RIF 0x00000004 -+#define BGMAC_DS_TBF 0x00000008 -+#define BGMAC_DS_TDF 0x00000010 -+#define BGMAC_DS_TIF 0x00000020 -+#define BGMAC_DS_PO 0x00000040 -+#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */ -+#define BGMAC_DS_MM_SHIFT 8 -+#define BGMAC_BIST_STATUS 0x00c -+#define BGMAC_INT_STATUS 0x020 /* Interrupt status */ -+#define BGMAC_IS_MRO 0x00000001 -+#define BGMAC_IS_MTO 0x00000002 -+#define BGMAC_IS_TFD 0x00000004 -+#define BGMAC_IS_LS 0x00000008 -+#define BGMAC_IS_MDIO 0x00000010 -+#define BGMAC_IS_MR 0x00000020 -+#define BGMAC_IS_MT 0x00000040 -+#define BGMAC_IS_TO 0x00000080 -+#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */ -+#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */ -+#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */ -+#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */ -+#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive FIFO overflow */ -+#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit FIFO underflow */ -+#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */ -+#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */ -+#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */ -+#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */ -+#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */ -+#define BGMAC_IS_TX_MASK 0x0f000000 -+#define BGMAC_IS_INTMASK 0x0f01fcff -+#define BGMAC_IS_ERRMASK 0x0000fc00 -+#define BGMAC_INT_MASK 0x024 /* Interrupt mask */ -+#define BGMAC_GP_TIMER 0x028 -+#define BGMAC_INT_RECV_LAZY 0x100 -+#define BGMAC_IRL_TO_MASK 0x00ffffff -+#define BGMAC_IRL_FC_MASK 0xff000000 -+#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */ -+#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */ -+#define BGMAC_WRRTHRESH 0x108 -+#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c -+#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */ -+#define BGMAC_PA_DATA_MASK 0x0000ffff -+#define BGMAC_PA_ADDR_MASK 0x001f0000 -+#define BGMAC_PA_ADDR_SHIFT 16 -+#define BGMAC_PA_REG_MASK 0x1f000000 -+#define BGMAC_PA_REG_SHIFT 24 -+#define BGMAC_PA_WRITE 0x20000000 -+#define BGMAC_PA_START 0x40000000 -+#define BGMAC_PHY_CNTL 0x188 /* PHY control address */ -+#define BGMAC_PC_EPA_MASK 0x0000001f -+#define BGMAC_PC_MCT_MASK 0x007f0000 -+#define BGMAC_PC_MCT_SHIFT 16 -+#define BGMAC_PC_MTE 0x00800000 -+#define BGMAC_TXQ_CTL 0x18c -+#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff -+#define BGMAC_TXQ_CTL_DBT_SHIFT 0 -+#define BGMAC_RXQ_CTL 0x190 -+#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff -+#define BGMAC_RXQ_CTL_DBT_SHIFT 0 -+#define BGMAC_RXQ_CTL_PTE 0x00001000 -+#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000 -+#define BGMAC_RXQ_CTL_MDP_SHIFT 24 -+#define BGMAC_GPIO_SELECT 0x194 -+#define BGMAC_GPIO_OUTPUT_EN 0x198 -+/* For 0x1e0 see BCMA_CLKCTLST */ -+#define BGMAC_HW_WAR 0x1e4 -+#define BGMAC_PWR_CTL 0x1e8 -+#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */ -+#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */ -+#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */ -+#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */ -+#define BGMAC_TX_GOOD_OCTETS 0x300 -+#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304 -+#define BGMAC_TX_GOOD_PKTS 0x308 -+#define BGMAC_TX_OCTETS 0x30c -+#define BGMAC_TX_OCTETS_HIGH 0x310 -+#define BGMAC_TX_PKTS 0x314 -+#define BGMAC_TX_BROADCAST_PKTS 0x318 -+#define BGMAC_TX_MULTICAST_PKTS 0x31c -+#define BGMAC_TX_LEN_64 0x320 -+#define BGMAC_TX_LEN_65_TO_127 0x324 -+#define BGMAC_TX_LEN_128_TO_255 0x328 -+#define BGMAC_TX_LEN_256_TO_511 0x32c -+#define BGMAC_TX_LEN_512_TO_1023 0x330 -+#define BGMAC_TX_LEN_1024_TO_1522 0x334 -+#define BGMAC_TX_LEN_1523_TO_2047 0x338 -+#define BGMAC_TX_LEN_2048_TO_4095 0x33c -+#define BGMAC_TX_LEN_4095_TO_8191 0x340 -+#define BGMAC_TX_LEN_8192_TO_MAX 0x344 -+#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */ -+#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */ -+#define BGMAC_TX_FRAGMENT_PKTS 0x350 -+#define BGMAC_TX_UNDERRUNS 0x354 /* Error */ -+#define BGMAC_TX_TOTAL_COLS 0x358 -+#define BGMAC_TX_SINGLE_COLS 0x35c -+#define BGMAC_TX_MULTIPLE_COLS 0x360 -+#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */ -+#define BGMAC_TX_LATE_COLS 0x368 /* Error */ -+#define BGMAC_TX_DEFERED 0x36c -+#define BGMAC_TX_CARRIER_LOST 0x370 -+#define BGMAC_TX_PAUSE_PKTS 0x374 -+#define BGMAC_TX_UNI_PKTS 0x378 -+#define BGMAC_TX_Q0_PKTS 0x37c -+#define BGMAC_TX_Q0_OCTETS 0x380 -+#define BGMAC_TX_Q0_OCTETS_HIGH 0x384 -+#define BGMAC_TX_Q1_PKTS 0x388 -+#define BGMAC_TX_Q1_OCTETS 0x38c -+#define BGMAC_TX_Q1_OCTETS_HIGH 0x390 -+#define BGMAC_TX_Q2_PKTS 0x394 -+#define BGMAC_TX_Q2_OCTETS 0x398 -+#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c -+#define BGMAC_TX_Q3_PKTS 0x3a0 -+#define BGMAC_TX_Q3_OCTETS 0x3a4 -+#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8 -+#define BGMAC_RX_GOOD_OCTETS 0x3b0 -+#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4 -+#define BGMAC_RX_GOOD_PKTS 0x3b8 -+#define BGMAC_RX_OCTETS 0x3bc -+#define BGMAC_RX_OCTETS_HIGH 0x3c0 -+#define BGMAC_RX_PKTS 0x3c4 -+#define BGMAC_RX_BROADCAST_PKTS 0x3c8 -+#define BGMAC_RX_MULTICAST_PKTS 0x3cc -+#define BGMAC_RX_LEN_64 0x3d0 -+#define BGMAC_RX_LEN_65_TO_127 0x3d4 -+#define BGMAC_RX_LEN_128_TO_255 0x3d8 -+#define BGMAC_RX_LEN_256_TO_511 0x3dc -+#define BGMAC_RX_LEN_512_TO_1023 0x3e0 -+#define BGMAC_RX_LEN_1024_TO_1522 0x3e4 -+#define BGMAC_RX_LEN_1523_TO_2047 0x3e8 -+#define BGMAC_RX_LEN_2048_TO_4095 0x3ec -+#define BGMAC_RX_LEN_4095_TO_8191 0x3f0 -+#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4 -+#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */ -+#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */ -+#define BGMAC_RX_FRAGMENT_PKTS 0x400 -+#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */ -+#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */ -+#define BGMAC_RX_UNDERSIZE 0x40c /* Error */ -+#define BGMAC_RX_CRC_ERRS 0x410 /* Error */ -+#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */ -+#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */ -+#define BGMAC_RX_PAUSE_PKTS 0x41c -+#define BGMAC_RX_NONPAUSE_PKTS 0x420 -+#define BGMAC_RX_SACHANGES 0x424 -+#define BGMAC_RX_UNI_PKTS 0x428 -+#define BGMAC_UNIMAC_VERSION 0x800 -+#define BGMAC_HDBKP_CTL 0x804 -+#define BGMAC_CMDCFG 0x808 /* Configuration */ -+#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */ -+#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */ -+#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */ -+#define BGMAC_CMDCFG_ES_10 0x00000000 -+#define BGMAC_CMDCFG_ES_100 0x00000004 -+#define BGMAC_CMDCFG_ES_1000 0x00000008 -+#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */ -+#define BGMAC_CMDCFG_PAD_EN 0x00000020 -+#define BGMAC_CMDCFG_CF 0x00000040 -+#define BGMAC_CMDCFG_PF 0x00000080 -+#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */ -+#define BGMAC_CMDCFG_TAI 0x00000200 -+#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ -+#define BGMAC_CMDCFG_HD_SHIFT 10 -+#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */ -+#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ -+#define BGMAC_CMDCFG_AE 0x00400000 -+#define BGMAC_CMDCFG_CFE 0x00800000 -+#define BGMAC_CMDCFG_NLC 0x01000000 -+#define BGMAC_CMDCFG_RL 0x02000000 -+#define BGMAC_CMDCFG_RED 0x04000000 -+#define BGMAC_CMDCFG_PE 0x08000000 -+#define BGMAC_CMDCFG_TPI 0x10000000 -+#define BGMAC_CMDCFG_AT 0x20000000 -+#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */ -+#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */ -+#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */ -+#define BGMAC_PAUSEQUANTA 0x818 -+#define BGMAC_MAC_MODE 0x844 -+#define BGMAC_OUTERTAG 0x848 -+#define BGMAC_INNERTAG 0x84c -+#define BGMAC_TXIPG 0x85c -+#define BGMAC_PAUSE_CTL 0xb30 -+#define BGMAC_TX_FLUSH 0xb34 -+#define BGMAC_RX_STATUS 0xb38 -+#define BGMAC_TX_STATUS 0xb3c -+ -+#define BGMAC_PHY_CTL 0x00 -+#define BGMAC_PHY_CTL_SPEED_MSB 0x0040 -+#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */ -+#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */ -+#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */ -+#define BGMAC_PHY_CTL_SPEED 0x2000 -+#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */ -+#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */ -+/* Helpers */ -+#define BGMAC_PHY_CTL_SPEED_10 0 -+#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED -+#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB -+#define BGMAC_PHY_ADV 0x04 -+#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */ -+#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */ -+#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */ -+#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */ -+#define BGMAC_PHY_ADV2 0x09 -+#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */ -+#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */ -+ -+/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */ -+#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */ -+#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */ -+ -+/* BCMA GMAC core specific IO status (BCMA_IOST) flags */ -+#define BGMAC_BCMA_IOST_ATTACHED 0x00000800 -+ -+#define BGMAC_NUM_MIB_TX_REGS \ -+ (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1) -+#define BGMAC_NUM_MIB_RX_REGS \ -+ (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1) -+ -+#define BGMAC_DMA_TX_CTL 0x00 -+#define BGMAC_DMA_TX_ENABLE 0x00000001 -+#define BGMAC_DMA_TX_SUSPEND 0x00000002 -+#define BGMAC_DMA_TX_LOOPBACK 0x00000004 -+#define BGMAC_DMA_TX_FLUSH 0x00000010 -+#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800 -+#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000 -+#define BGMAC_DMA_TX_ADDREXT_SHIFT 16 -+#define BGMAC_DMA_TX_INDEX 0x04 -+#define BGMAC_DMA_TX_RINGLO 0x08 -+#define BGMAC_DMA_TX_RINGHI 0x0C -+#define BGMAC_DMA_TX_STATUS 0x10 -+#define BGMAC_DMA_TX_STATDPTR 0x00001FFF -+#define BGMAC_DMA_TX_STAT 0xF0000000 -+#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000 -+#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000 -+#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000 -+#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000 -+#define BGMAC_DMA_TX_STAT_SUSP 0x40000000 -+#define BGMAC_DMA_TX_ERROR 0x14 -+#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF -+#define BGMAC_DMA_TX_ERR 0xF0000000 -+#define BGMAC_DMA_TX_ERR_NOERR 0x00000000 -+#define BGMAC_DMA_TX_ERR_PROT 0x10000000 -+#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000 -+#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000 -+#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000 -+#define BGMAC_DMA_TX_ERR_CORE 0x50000000 -+#define BGMAC_DMA_RX_CTL 0x20 -+#define BGMAC_DMA_RX_ENABLE 0x00000001 -+#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE -+#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1 -+#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100 -+#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400 -+#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800 -+#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000 -+#define BGMAC_DMA_RX_ADDREXT_SHIFT 16 -+#define BGMAC_DMA_RX_INDEX 0x24 -+#define BGMAC_DMA_RX_RINGLO 0x28 -+#define BGMAC_DMA_RX_RINGHI 0x2C -+#define BGMAC_DMA_RX_STATUS 0x30 -+#define BGMAC_DMA_RX_STATDPTR 0x00001FFF -+#define BGMAC_DMA_RX_STAT 0xF0000000 -+#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000 -+#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000 -+#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000 -+#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000 -+#define BGMAC_DMA_RX_STAT_SUSP 0x40000000 -+#define BGMAC_DMA_RX_ERROR 0x34 -+#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF -+#define BGMAC_DMA_RX_ERR 0xF0000000 -+#define BGMAC_DMA_RX_ERR_NOERR 0x00000000 -+#define BGMAC_DMA_RX_ERR_PROT 0x10000000 -+#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000 -+#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000 -+#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000 -+#define BGMAC_DMA_RX_ERR_CORE 0x50000000 -+ -+#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */ -+#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */ -+#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */ -+#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */ -+#define BGMAC_DESC_CTL1_LEN 0x00001FFF -+ -+#define BGMAC_PHY_NOREGS 0x1E -+#define BGMAC_PHY_MASK 0x1F -+ -+#define BGMAC_MAX_TX_RINGS 4 -+#define BGMAC_MAX_RX_RINGS 1 -+ -+#define BGMAC_TX_RING_SLOTS 128 -+#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */ -+ -+#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ -+#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ -+#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */ -+#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) -+ -+#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */ -+#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */ -+#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */ -+ -+#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030 -+#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000 -+#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010 -+#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020 -+#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0 -+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 -+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 -+#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 -+#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 -+#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 -+ -+#define BGMAC_SPEED_10 0x0001 -+#define BGMAC_SPEED_100 0x0002 -+#define BGMAC_SPEED_1000 0x0004 -+ -+#define BGMAC_WEIGHT 64 -+ -+#define ETHER_MAX_LEN 1518 -+ -+struct bgmac_slot_info { -+ struct sk_buff *skb; -+ dma_addr_t dma_addr; -+}; -+ -+struct bgmac_dma_desc { -+ __le32 ctl0; -+ __le32 ctl1; -+ __le32 addr_low; -+ __le32 addr_high; -+} __packed; -+ -+enum bgmac_dma_ring_type { -+ BGMAC_DMA_RING_TX, -+ BGMAC_DMA_RING_RX, -+}; -+ -+/** -+ * bgmac_dma_ring - contains info about DMA ring (either TX or RX one) -+ * @start: index of the first slot containing data -+ * @end: index of a slot that can *not* be read (yet) -+ * -+ * Be really aware of the specific @end meaning. It's an index of a slot *after* -+ * the one containing data that can be read. If @start equals @end the ring is -+ * empty. -+ */ -+struct bgmac_dma_ring { -+ u16 num_slots; -+ u16 start; -+ u16 end; -+ -+ u16 mmio_base; -+ struct bgmac_dma_desc *cpu_base; -+ dma_addr_t dma_base; -+ -+ struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS]; -+}; -+ -+struct bgmac_rx_header { -+ __le16 len; -+ __le16 flags; -+ __le16 pad[12]; -+}; -+ -+struct bgmac { -+ struct bcma_device *core; -+ struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ -+ struct net_device *net_dev; -+ struct napi_struct napi; -+ -+ /* DMA */ -+ struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS]; -+ struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS]; -+ -+ /* Stats */ -+ bool stats_grabbed; -+ u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS]; -+ u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS]; -+ -+ /* Int */ -+ u32 int_mask; -+ u32 int_status; -+ -+ /* Speed-related */ -+ int speed; -+ bool autoneg; -+ bool full_duplex; -+ -+ u8 phyaddr; -+ bool has_robosw; -+ -+ bool loopback; -+}; -+ -+static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) -+{ -+ return bcma_read32(bgmac->core, offset); -+} -+ -+static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) -+{ -+ bcma_write32(bgmac->core, offset, value); -+} -+ -+static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask, -+ u32 set) -+{ -+ bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set); -+} -+ -+static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask) -+{ -+ bgmac_maskset(bgmac, offset, mask, 0); -+} -+ -+static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set) -+{ -+ bgmac_maskset(bgmac, offset, ~0, set); -+} -+ -+u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); -+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); -+ -+#endif /* _BGMAC_H */ |