brcm47xx: improve IRQ handling for bcma based devices

This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989

1 files changed, 109 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-3.6/181-bcma-explicit-assigne-irq-numbers.patch b/target/linux/brcm47xx/patches-3.6/181-bcma-explicit-assigne-irq-numbers.patch
new file mode 100644
index 0000000000..7fac41535d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.6/181-bcma-explicit-assigne-irq-numbers.patch
@@ -0,0 +1,109 @@
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -148,6 +148,22 @@ static void bcma_core_mips_set_irq(struc
+ 		  dev->id.id, oldirq + 2, irq + 2);
+ }
+ 
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++					u16 coreid, u8 unit)
++{
++	struct bcma_device *core;
++
++	core = bcma_find_core_unit(bus, coreid, unit);
++	if (!core) {
++		bcma_warn(bus,
++			  "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++			  coreid, unit);
++		return;
++	}
++
++	bcma_core_mips_set_irq(core, irq);
++}
++
+ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ 	int i;
+@@ -247,7 +263,8 @@ void bcma_core_mips_early_init(struct bc
+ void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+ {
+ 	struct bcma_bus *bus;
+-	struct bcma_device *core;
++	int irq;
++
+ 	bus = mcore->core->bus;
+ 
+ 	if (mcore->setup_done)
+@@ -259,35 +276,44 @@ void bcma_core_mips_init(struct bcma_drv
+ 
+ 	mcore->assigned_irqs = 1;
+ 
+-	/* Assign IRQs to all cores on the bus */
+-	list_for_each_entry(core, &bus->cores, list) {
+-		int mips_irq;
+-		if (core->irq)
+-			continue;
+-
+-		mips_irq = bcma_core_mips_irq(core);
+-		if (mips_irq > 4)
+-			core->irq = 0;
+-		else
+-			core->irq = mips_irq + 2;
+-		if (core->irq > 5)
+-			continue;
+-		switch (core->id.id) {
+-		case BCMA_CORE_PCI:
+-		case BCMA_CORE_PCIE:
+-		case BCMA_CORE_ETHERNET:
+-		case BCMA_CORE_ETHERNET_GBIT:
+-		case BCMA_CORE_MAC_GBIT:
+-		case BCMA_CORE_80211:
+-		case BCMA_CORE_USB20_HOST:
+-			/* These devices get their own IRQ line if available,
+-			 * the rest goes on IRQ0
+-			 */
+-			if (mcore->assigned_irqs <= 4)
+-				bcma_core_mips_set_irq(core,
+-						       mcore->assigned_irqs++);
+-			break;
+-		}
++	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4716:
++	case BCMA_CHIP_ID_BCM4748:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++		break;
++	case BCMA_CHIP_ID_BCM5356:
++	case BCMA_CHIP_ID_BCM47162:
++	case BCMA_CHIP_ID_BCM53572:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		break;
++	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4749:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++		break;
++	case BCMA_CHIP_ID_BCM4706:
++		bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++		bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++					    0);
++		bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++		bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++		bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++					    0);
++		break;
++	default:
++		bcma_err(bus,
++			 "Unknown device (0x%x) found, can not configure IRQs\n",
++			 bus->chipinfo.id);
+ 	}
+ 	bcma_info(bus, "IRQ reconfiguration done\n");
+ 	bcma_core_mips_dump_irq(bus);