brcm47xx: remove support for kernel 3.0

SVN-Revision: 31276

1 files changed, 0 insertions, 697 deletions

diff --git a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
deleted file mode 100644
index e91c2a44f4..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
+++ /dev/null
@@ -1,697 +0,0 @@
-From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 Jul 2011 20:20:36 +0200
-Subject: [PATCH 15/26] ssb: add serial flash support
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/ssb/Kconfig                       |    6 +
- drivers/ssb/Makefile                      |    1 +
- drivers/ssb/driver_chipcommon_sflash.c    |  556 +++++++++++++++++++++++++++++
- drivers/ssb/driver_mipscore.c             |    6 +
- drivers/ssb/ssb_private.h                 |    4 +
- include/linux/ssb/ssb_driver_chipcommon.h |   30 ++-
- 6 files changed, 601 insertions(+), 2 deletions(-)
- create mode 100644 drivers/ssb/driver_chipcommon_sflash.c
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
- 
- 	  If unsure, say N
- 
-+config SSB_SFLASH
-+	bool
-+	depends on SSB_DRIVER_MIPS
-+	default y
-+
-+
- # Assumption: We are on embedded, if we compile the MIPS core.
- config SSB_EMBEDDED
- 	bool
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
- # built-in drivers
- ssb-y					+= driver_chipcommon.o
- ssb-y					+= driver_chipcommon_pmu.o
-+ssb-$(CONFIG_SSB_SFLASH)		+= driver_chipcommon_sflash.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,556 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright 2010, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+#define NUM_RETRIES	3
-+
-+
-+/* Issue a serial flash command */
-+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
-+			SSB_CHIPCO_FLASHCTL_START | opcode);
-+	while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
-+			& SSB_CHIPCO_FLASHCTL_BUSY)
-+		;
-+}
-+
-+
-+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
-+					      u32 offset, u8 byte)
-+{
-+	chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+	chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
-+}
-+
-+/* Initialize serial flash access */
-+int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+	u32 id, id2;
-+
-+	memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
-+
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		/* Probe for ST chips */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+		cc->sflash.blocksize = 64 * 1024;
-+		switch (id) {
-+		case 0x11:
-+			/* ST M25P20 2 Mbit Serial Flash */
-+			cc->sflash.numblocks = 4;
-+			break;
-+		case 0x12:
-+			/* ST M25P40 4 Mbit Serial Flash */
-+			cc->sflash.numblocks = 8;
-+			break;
-+		case 0x13:
-+			/* ST M25P80 8 Mbit Serial Flash */
-+			cc->sflash.numblocks = 16;
-+			break;
-+		case 0x14:
-+			/* ST M25P16 16 Mbit Serial Flash */
-+			cc->sflash.numblocks = 32;
-+			break;
-+		case 0x15:
-+			/* ST M25P32 32 Mbit Serial Flash */
-+			cc->sflash.numblocks = 64;
-+			break;
-+		case 0x16:
-+			/* ST M25P64 64 Mbit Serial Flash */
-+			cc->sflash.numblocks = 128;
-+			break;
-+		case 0x17:
-+			/* ST M25FL128 128 Mbit Serial Flash */
-+			cc->sflash.numblocks = 256;
-+			break;
-+		case 0xbf:
-+			/* All of the following flashes are SST with
-+			 * 4KB subsectors. Others should be added but
-+			 * We'll have to revamp the way we identify them
-+			 * since RES is not eough to disambiguate them.
-+			 */
-+			cc->sflash.blocksize = 4 * 1024;
-+			chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
-+			ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+			id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+			switch (id2) {
-+			case 1:
-+				/* SST25WF512 512 Kbit Serial Flash */
-+			case 0x48:
-+				/* SST25VF512 512 Kbit Serial Flash */
-+				cc->sflash.numblocks = 16;
-+				break;
-+			case 2:
-+				/* SST25WF010 1 Mbit Serial Flash */
-+			case 0x49:
-+				/* SST25VF010 1 Mbit Serial Flash */
-+				cc->sflash.numblocks = 32;
-+				break;
-+			case 3:
-+				/* SST25WF020 2 Mbit Serial Flash */
-+			case 0x43:
-+				/* SST25VF020 2 Mbit Serial Flash */
-+				cc->sflash.numblocks = 64;
-+				break;
-+			case 4:
-+				/* SST25WF040 4 Mbit Serial Flash */
-+			case 0x44:
-+				/* SST25VF040 4 Mbit Serial Flash */
-+			case 0x8d:
-+				/* SST25VF040B 4 Mbit Serial Flash */
-+				cc->sflash.numblocks = 128;
-+				break;
-+			case 5:
-+				/* SST25WF080 8 Mbit Serial Flash */
-+			case 0x8e:
-+				/* SST25VF080B 8 Mbit Serial Flash */
-+				cc->sflash.numblocks = 256;
-+				break;
-+			case 0x41:
-+				/* SST25VF016 16 Mbit Serial Flash */
-+				cc->sflash.numblocks = 512;
-+				break;
-+			case 0x4a:
-+				/* SST25VF032 32 Mbit Serial Flash */
-+				cc->sflash.numblocks = 1024;
-+				break;
-+			case 0x4b:
-+				/* SST25VF064 64 Mbit Serial Flash */
-+				cc->sflash.numblocks = 2048;
-+				break;
-+			}
-+			break;
-+		}
-+		break;
-+
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		/* Probe for Atmel chips */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+		id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
-+		switch (id) {
-+		case 0xc:
-+			/* Atmel AT45DB011 1Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 512;
-+			break;
-+		case 0x14:
-+			/* Atmel AT45DB021 2Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 1024;
-+			break;
-+		case 0x1c:
-+			/* Atmel AT45DB041 4Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 2048;
-+			break;
-+		case 0x24:
-+			/* Atmel AT45DB081 8Mbit Serial Flash */
-+			cc->sflash.blocksize = 256;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x2c:
-+			/* Atmel AT45DB161 16Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 4096;
-+			break;
-+		case 0x34:
-+			/* Atmel AT45DB321 32Mbit Serial Flash */
-+			cc->sflash.blocksize = 512;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		case 0x3c:
-+			/* Atmel AT45DB642 64Mbit Serial Flash */
-+			cc->sflash.blocksize = 1024;
-+			cc->sflash.numblocks = 8192;
-+			break;
-+		}
-+		break;
-+	}
-+
-+	cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
-+
-+	return cc->sflash.size ? 0 : -ENODEV;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   u8 *buf)
-+{
-+	u8 *from, *to;
-+	u32 cnt, i;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	if ((len >= 4) && (offset & 3))
-+		cnt = 4 - (offset & 3);
-+	else if ((len >= 4) && ((u32)buf & 3))
-+		cnt = 4 - ((u32)buf & 3);
-+	else
-+		cnt = len;
-+
-+
-+	if (cc->dev->id.revision == 12)
-+		from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
-+	else
-+		from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
-+
-+	to = (u8 *)buf;
-+
-+	if (cnt < 4) {
-+		for (i = 0; i < cnt; i++) {
-+			*to = readb(from);
-+			from++;
-+			to++;
-+		}
-+		return cnt;
-+	}
-+
-+	while (cnt >= 4) {
-+		*(u32 *)to = readl(from);
-+		from += 4;
-+		to += 4;
-+		cnt -= 4;
-+	}
-+
-+	return len - cnt;
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
-+{
-+	if (offset >= cc->sflash.size)
-+		return -22;
-+
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		/* Check for ST Write In Progress bit */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
-+		return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+				& SSB_CHIPCO_FLASHSTA_ST_WIP;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		/* Check for Atmel Ready bit */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+		return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+				& SSB_CHIPCO_FLASHSTA_AT_READY);
-+	}
-+
-+	return 0;
-+}
-+
-+
-+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct ssb_bus *bus = cc->dev->bus;
-+	int ret = 0;
-+	bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
-+	u32 mask;
-+
-+
-+	/* Enable writes */
-+	ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+	if (is4712b0) {
-+		mask = 1 << 14;
-+		ssb_sflash_write_u8(cc, offset, *buf++);
-+		/* Set chip select */
-+		chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
-+		/* Issue a page program with the first byte */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, drop cs and return */
-+				chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+				udelay(1);
-+				if (!ssb_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				ssb_sflash_cmd(cc, *buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs */
-+		chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+		udelay(1);
-+		if (!ssb_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else if (cc->dev->id.revision >= 20) {
-+		ssb_sflash_write_u8(cc, offset, *buf++);
-+		/* Issue a page program with CSA bit set */
-+		ssb_sflash_cmd(cc,
-+				SSB_CHIPCO_FLASHCTL_ST_CSA |
-+				SSB_CHIPCO_FLASHCTL_ST_PP);
-+		ret = 1;
-+		offset++;
-+		len--;
-+		while (len > 0) {
-+			if ((offset & 255) == 0) {
-+				/* Page boundary, poll droping cs and return */
-+				chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+				udelay(1);
-+				if (!ssb_sflash_poll(cc, offset)) {
-+					/* Flash rejected command */
-+					return -EAGAIN;
-+				}
-+				return ret;
-+			} else {
-+				/* Write single byte */
-+				ssb_sflash_cmd(cc,
-+						SSB_CHIPCO_FLASHCTL_ST_CSA |
-+						*buf++);
-+			}
-+			ret++;
-+			offset++;
-+			len--;
-+		}
-+		/* All done, drop cs & poll */
-+		chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+		udelay(1);
-+		if (!ssb_sflash_poll(cc, offset)) {
-+			/* Flash rejected command */
-+			return -EAGAIN;
-+		}
-+	} else {
-+		ret = 1;
-+		ssb_sflash_write_u8(cc, offset, *buf);
-+		/* Page program */
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+	}
-+	return ret;
-+}
-+
-+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   const u8 *buf)
-+{
-+	struct ssb_sflash *sfl = &cc->sflash;
-+	u32 page, byte, mask;
-+	int ret = 0;
-+	mask = sfl->blocksize - 1;
-+	page = (offset & ~mask) << 1;
-+	byte = offset & mask;
-+	/* Read main memory page into buffer 1 */
-+	if (byte || (len < sfl->blocksize)) {
-+		int i = 100;
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
-+		/* 250 us for AT45DB321B */
-+		while (i > 0 && ssb_sflash_poll(cc, offset)) {
-+			udelay(10);
-+			i--;
-+		}
-+		BUG_ON(!ssb_sflash_poll(cc, offset));
-+	}
-+	/* Write into buffer 1 */
-+	for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+		ssb_sflash_write_u8(cc, byte++, *buf++);
-+		ssb_sflash_cmd(cc,
-+				SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
-+	}
-+	/* Write buffer 1 into main memory page */
-+	chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+	ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
-+
-+	return ret;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			    const u8 *buf)
-+{
-+	struct ssb_sflash *sfl;
-+	int ret = 0, tries = NUM_RETRIES;
-+
-+	if (!len)
-+		return 0;
-+
-+	if ((offset + len) > cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		do {
-+			ret = sflash_st_write(cc, offset, len, buf);
-+			tries--;
-+		} while (ret == -EAGAIN && tries > 0);
-+
-+		if (ret == -EAGAIN && tries == 0) {
-+			pr_info("ST Flash rejected write\n");
-+			ret = -EIO;
-+		}
-+		break;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		ret = sflash_at_write(cc, offset, len, buf);
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
-+{
-+	struct ssb_sflash *sfl;
-+
-+	if (offset >= cc->sflash.size)
-+		return -EINVAL;
-+
-+	sfl = &cc->sflash;
-+	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+	case SSB_CHIPCO_FLASHT_STSER:
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+		/* Newer flashes have "sub-sectors" which can be erased independently
-+		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
-+		 * before.
-+		 */
-+		ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE);
-+		return sfl->blocksize;
-+	case SSB_CHIPCO_FLASHT_ATSER:
-+		chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
-+		ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
-+		return sfl->blocksize;
-+	}
-+
-+	return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			     const u8 *buf)
-+{
-+	struct ssb_sflash *sfl;
-+	u8 *block = NULL, *cur_ptr, *blk_ptr;
-+	u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+	u32 blk_offset, blk_len, copied;
-+	int bytes, ret = 0;
-+
-+	/* Check address range */
-+	if (len <= 0)
-+		return 0;
-+
-+	sfl = &cc->sflash;
-+	if ((offset + len) > sfl->size)
-+		return -EINVAL;
-+
-+	blocksize = sfl->blocksize;
-+	mask = blocksize - 1;
-+
-+	/* Allocate a block of mem */
-+	block = kmalloc(blocksize, GFP_KERNEL);
-+	if (!block)
-+		return -ENOMEM;
-+
-+	while (len) {
-+		/* Align offset */
-+		cur_offset = offset & ~mask;
-+		cur_length = blocksize;
-+		cur_ptr = block;
-+
-+		remainder = blocksize - (offset & mask);
-+		if (len < remainder)
-+			cur_retlen = len;
-+		else
-+			cur_retlen = remainder;
-+
-+		/* buf == NULL means erase only */
-+		if (buf) {
-+			/* Copy existing data into holding block if necessary */
-+			if ((offset & mask) || (len < blocksize)) {
-+				blk_offset = cur_offset;
-+				blk_len = cur_length;
-+				blk_ptr = cur_ptr;
-+
-+				/* Copy entire block */
-+				while (blk_len) {
-+					copied = ssb_sflash_read(cc,
-+							blk_offset,
-+							blk_len, blk_ptr);
-+					blk_offset += copied;
-+					blk_len -= copied;
-+					blk_ptr += copied;
-+				}
-+			}
-+
-+			/* Copy input data into holding block */
-+			memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+		}
-+
-+		/* Erase block */
-+		ret = ssb_sflash_erase(cc, cur_offset);
-+		if (ret < 0)
-+			goto done;
-+
-+		while (ssb_sflash_poll(cc, cur_offset));
-+
-+		/* buf == NULL means erase only */
-+		if (!buf) {
-+			offset += cur_retlen;
-+			len -= cur_retlen;
-+			continue;
-+		}
-+
-+		/* Write holding block */
-+		while (cur_length > 0) {
-+			bytes = ssb_sflash_write(cc, cur_offset,
-+					cur_length, cur_ptr);
-+
-+			if (bytes < 0) {
-+				ret = bytes;
-+				goto done;
-+			}
-+
-+			while (ssb_sflash_poll(cc, cur_offset))
-+				;
-+
-+			cur_offset += bytes;
-+			cur_length -= bytes;
-+			cur_ptr += bytes;
-+		}
-+
-+		offset += cur_retlen;
-+		len -= cur_retlen;
-+		buf += cur_retlen;
-+	}
-+
-+	ret = len;
-+done:
-+	kfree(block);
-+	return ret;
-+}
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
- 	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
- 	case SSB_CHIPCO_FLASHT_STSER:
- 	case SSB_CHIPCO_FLASHT_ATSER:
-+#ifdef CONFIG_SSB_SFLASH
-+		pr_info("found serial flash.\n");
-+		bus->chipco.flash_type = SSB_SFLASH;
-+		ssb_sflash_init(&bus->chipco);
-+#else
- 		pr_info("serial flash not supported.\n");
-+#endif /* CONFIG_SSB_SFLASH */
- 		break;
- 	case SSB_CHIPCO_FLASHT_PARA:
- 		pr_info("found parallel flash.\n");
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
- extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
- 
- 
-+#ifdef CONFIG_SSB_SFLASH
-+/* driver_chipcommon_sflash.c */
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#endif /* CONFIG_SSB_SFLASH */
- 
- /* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_B43_PCI_BRIDGE
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -503,8 +503,10 @@
- #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
- #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
- #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
--#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
--#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00D9		/* Deep Power-down */
-+#define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
-+#define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
- 
- /* Status register bits for ST flashes */
- #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
- #ifdef CONFIG_SSB_DRIVER_MIPS
- enum ssb_flash_type {
- 	SSB_PFLASH,
-+	SSB_SFLASH,
- };
- 
- struct ssb_pflash {
-@@ -592,6 +595,14 @@ struct ssb_pflash {
- 	u32 window;
- 	u32 window_size;
- };
-+
-+#ifdef CONFIG_SSB_SFLASH
-+struct ssb_sflash {
-+	u32 blocksize;		/* Block size */
-+	u32 numblocks;		/* Number of blocks */
-+	u32 size;		/* Total size in bytes */
-+};
-+#endif /* CONFIG_SSB_SFLASH */
- #endif /* CONFIG_SSB_DRIVER_MIPS */
- 
- struct ssb_chipcommon {
-@@ -605,6 +616,9 @@ struct ssb_chipcommon {
- 	enum ssb_flash_type flash_type;
- 	union {
- 		struct ssb_pflash pflash;
-+#ifdef CONFIG_SSB_SFLASH
-+		struct ssb_sflash sflash;
-+#endif /* CONFIG_SSB_SFLASH */
- 	};
- #endif /* CONFIG_SSB_DRIVER_MIPS */
- };
-@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct
- 				  struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
- 
-+#ifdef CONFIG_SSB_SFLASH
-+/* Chipcommon sflash support. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			   u8 *buf);
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			    const u8 *buf);
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+			     const u8 *buf);
-+#endif /* CONFIG_SSB_SFLASH */
-+
- /* PMU support */
- extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-