brcm47xx: add kernel 2.6.35 preliminary support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21707 3c298f89-4303-0410-b956-a3cf2f4a3e73

26 files changed, 2543 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.35/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.35/110-flash_map.patch
new file mode 100644
index 0000000000..a481125e2c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/110-flash_map.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -319,6 +319,12 @@ config MTD_CFI_FLAGADM
+ 	  Mapping for the Flaga digital module. If you don't have one, ignore
+ 	  this setting.
+ 
++config MTD_BCM47XX
++	tristate "BCM47xx flash device"
++	depends on MIPS && MTD_CFI && BCM47XX
++	help
++	  Support for the flash chips on the BCM947xx board.
++
+ config MTD_REDWOOD
+ 	tristate "CFI Flash devices mapped on IBM Redwood"
+ 	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcms
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
++obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
+ obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
+ obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
diff --git a/target/linux/brcm47xx/patches-2.6.35/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.35/130-remove_scache.patch
new file mode 100644
index 0000000000..0bdb13d3f4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/130-remove_scache.patch
@@ -0,0 +1,89 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -205,7 +205,6 @@ config MIPS_MALTA
+ 	select I8259
+ 	select MIPS_BOARDS_GEN
+ 	select MIPS_BONITO64
+-	select MIPS_CPU_SCACHE
+ 	select PCI_GT64XXX_PCI0
+ 	select MIPS_MSC
+ 	select SWAP_IO_SPACE
+@@ -1589,13 +1588,6 @@ config IP22_CPU_SCACHE
+ 	bool
+ 	select BOARD_SCACHE
+ 
+-#
+-# Support for a MIPS32 / MIPS64 style S-caches
+-#
+-config MIPS_CPU_SCACHE
+-	bool
+-	select BOARD_SCACHE
+-
+ config R5000_CPU_SCACHE
+ 	bool
+ 	select BOARD_SCACHE
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -772,6 +772,8 @@ static inline void cpu_probe_mips(struct
+ 	case PRID_IMP_25KF:
+ 		c->cputype = CPU_25KF;
+ 		__cpu_name[cpu] = "MIPS 25Kc";
++		/* Probe for L2 cache */
++		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+ 		break;
+ 	case PRID_IMP_34K:
+ 		c->cputype = CPU_34K;
+--- a/arch/mips/mm/Makefile
++++ b/arch/mips/mm/Makefile
+@@ -33,6 +33,5 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-oct
+ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
+ obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
+ obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
+-obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -1148,7 +1148,6 @@ static void __init loongson2_sc_init(voi
+ 
+ extern int r5k_sc_init(void);
+ extern int rm7k_sc_init(void);
+-extern int mips_sc_init(void);
+ 
+ static void __cpuinit setup_scache(void)
+ {
+@@ -1202,29 +1201,17 @@ static void __cpuinit setup_scache(void)
+ #endif
+ 
+ 	default:
+-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
+-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
+-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
+-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
+-#ifdef CONFIG_MIPS_CPU_SCACHE
+-			if (mips_sc_init ()) {
+-				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
+-				printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
+-				       scache_size >> 10,
+-				       way_string[c->scache.ways], c->scache.linesz);
+-			}
+-#else
+-			if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
+-				panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
+-#endif
+-			return;
+-		}
+ 		sc_present = 0;
+ 	}
+ 
+ 	if (!sc_present)
+ 		return;
+ 
++	if ((c->isa_level == MIPS_CPU_ISA_M32R1 ||
++	     c->isa_level == MIPS_CPU_ISA_M64R1) &&
++	    !(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
++		panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
++
+ 	/* compute a couple of other cache variables */
+ 	c->scache.waysize = scache_size / c->scache.ways;
+ 
diff --git a/target/linux/brcm47xx/patches-2.6.35/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.35/150-cpu_fixes.patch
new file mode 100644
index 0000000000..de79ca8898
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/150-cpu_fixes.patch
@@ -0,0 +1,367 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -17,6 +17,20 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsmtregs.h>
+ 
++#ifdef CONFIG_BCM47XX
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++
++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+  * This macro return a properly sign-extended address suitable as base address
+  * for indexed cache operations.  Two issues here:
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Index_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Invalidate_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+  */
+ static inline void protected_flush_icache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Invalidate_I, addr);
+ }
+ 
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+  */
+ static inline void protected_writeback_dcache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Writeback_Inv_D, addr);
+ }
+ 
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+ 		: "r" (base),						\
+ 		  "i" (op));
+ 
++static inline void blast_dcache(void)
++{
++	unsigned long start = KSEG0;
++	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++	unsigned long end = (start + dcache_size);
++
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Index_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++
++	BCM4710_FILL_TLB(start);
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Hit_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++	unsigned long ws_end = current_cpu_data.dcache.ways <<
++	                       current_cpu_data.dcache.waybit;
++	unsigned long ws, addr;
++	for (ws = 0; ws < ws_end; ws += ws_inc) {
++		start = page + ws;
++		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++			BCM4710_DUMMY_RREG();
++			cache_op(Index_Writeback_Inv_D, addr);
++		}
++	}
++}
++
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
+ static inline void blast_##pfx##cache##lsize(void)			\
+ {									\
+ 	unsigned long start = INDEX_BASE;				\
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+ 		for (addr = start; addr < end; addr += lsize * 32)	\
+ 			cache##lsize##_unroll32(addr|ws, indexop);	\
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	do {								\
+ 		cache##lsize##_unroll32(start, hitop);			\
+ 		start += lsize * 32;					\
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+ 	                       current_cpu_data.desc.waybit;		\
+ 	unsigned long ws, addr;						\
+ 									\
++	war								\
++									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+ 
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
+ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ 						    unsigned long end)	\
+ {									\
+ 	unsigned long lsize = cpu_##desc##_line_size();			\
+ 	unsigned long addr = start & ~(lsize - 1);			\
+ 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
++	war								\
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	while (1) {							\
++		war2						\
+ 		prot##cache_op(hitop, addr);				\
+ 		if (addr == aend)					\
+ 			break;						\
+@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
+ 
+ #endif /* _ASM_R4KCACHE_H */
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -449,6 +449,10 @@
+ 		.macro	RESTORE_SP_AND_RET
+ 		LONG_L	sp, PT_R29(sp)
+ 		.set	mips3
++#ifdef CONFIG_BCM47XX
++		nop
++		nop
++#endif
+ 		eret
+ 		.set	mips0
+ 		.endm
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
+ NESTED(except_vec3_generic, 0, sp)
+ 	.set	push
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++	nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+ #endif
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -35,6 +35,9 @@
+ #include <asm/cacheflush.h> /* for run_uncached() */
+ 
+ 
++/* For enabling BCM4710 cache workarounds */
++int bcm4710 = 0;
++
+ /*
+  * Special Variant of smp_call_function for use by cache functions:
+  *
+@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long  dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page = blast_dcache_page;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache = blast_dcache;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -680,6 +692,8 @@ static void local_r4k_flush_cache_sigtra
+ 	unsigned long addr = (unsigned long) arg;
+ 
+ 	R4600_HIT_CACHEOP_WAR_IMPL;
++	BCM4710_PROTECTED_FILL_TLB(addr);
++	BCM4710_PROTECTED_FILL_TLB(addr + 4);
+ 	if (dc_lsize)
+ 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ 	if (!cpu_icache_snoops_remote_store && scache_size)
+@@ -1298,6 +1312,17 @@ static void __cpuinit coherency_setup(vo
+ 	 * silly idea of putting something else there ...
+ 	 */
+ 	switch (current_cpu_type()) {
++	case CPU_BCM3302:
++		{
++			u32 cm;
++			cm = read_c0_diag();
++			/* Enable icache */
++			cm |= (1 << 31);
++			/* Enable dcache */
++			cm |= (1 << 30);
++			write_c0_diag(cm);
++		}
++		break;
+ 	case CPU_R4000PC:
+ 	case CPU_R4000SC:
+ 	case CPU_R4000MC:
+@@ -1354,6 +1379,15 @@ void __cpuinit r4k_cache_init(void)
+ 		break;
+ 	}
+ 
++	/* Check if special workarounds are required */
++#ifdef CONFIG_BCM47XX
++	if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) {
++		printk("Enabling BCM4710A0 cache workarounds.\n");
++		bcm4710 = 1;
++	} else
++#endif
++		bcm4710 = 0;
++
+ 	probe_pcache();
+ 	setup_scache();
+ 
+@@ -1412,5 +1446,13 @@ void __cpuinit r4k_cache_init(void)
+ #if !defined(CONFIG_MIPS_CMP)
+ 	local_r4k___flush_cache_all(NULL);
+ #endif
++#ifdef CONFIG_BCM47XX
++	{
++		static void (*_coherency_setup)(void);
++		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++		_coherency_setup();
++	}
++#else
+ 	coherency_setup();
++#endif
+ }
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -868,6 +868,9 @@ static void __cpuinit build_r4000_tlb_re
+ 		/* No need for uasm_i_nop */
+ 	}
+ 
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(&p);
++#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
+@@ -1318,6 +1321,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ 				   struct uasm_reloc **r, unsigned int pte,
+ 				   unsigned int ptr)
+ {
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
+ #else
diff --git a/target/linux/brcm47xx/patches-2.6.35/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.35/160-kmap_coherent.patch
new file mode 100644
index 0000000000..4a71a6fc6d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/160-kmap_coherent.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -110,6 +110,9 @@
+ #ifndef cpu_has_pindexed_dcache
+ #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+ 
+ /*
+  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -0,0 +1,13 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
++ */
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_use_kmap_coherent	0
++
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
+ 		 */
+ 		map_coherent = (cpu_has_dc_aliases &&
+ 				page_mapped(page) && !Page_dcache_dirty(page));
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			vaddr = kmap_coherent(page, addr);
+ 		else
+ 			vaddr = kmap_atomic(page, KM_USER0);
+@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
+ 	}
+ 
+ 	if (vaddr) {
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			kunmap_coherent();
+ 		else
+ 			kunmap_atomic(vaddr, KM_USER0);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -210,7 +210,7 @@ void copy_user_highpage(struct page *to,
+ 	void *vfrom, *vto;
+ 
+ 	vto = kmap_atomic(to, KM_USER1);
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(from) && !Page_dcache_dirty(from)) {
+ 		vfrom = kmap_coherent(from, vaddr);
+ 		copy_page(vto, vfrom);
+@@ -232,7 +232,7 @@ void copy_to_user_page(struct vm_area_st
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(vto, src, len);
+@@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-2.6.35/170-128MB_ram_bugfix.patch b/target/linux/brcm47xx/patches-2.6.35/170-128MB_ram_bugfix.patch
new file mode 100644
index 0000000000..9819ad7115
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/170-128MB_ram_bugfix.patch
@@ -0,0 +1,45 @@
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -126,6 +126,7 @@ static __init void prom_init_cmdline(voi
+ static __init void prom_init_mem(void)
+ {
+ 	unsigned long mem;
++	unsigned long max;
+ 
+ 	/* Figure out memory size by finding aliases.
+ 	 *
+@@ -134,21 +135,26 @@ static __init void prom_init_mem(void)
+ 	 * want to reuse the memory used by CFE (around 4MB). That means cfe_*
+ 	 * functions stop to work at some point during the boot, we should only
+ 	 * call them at the beginning of the boot.
++	 * 
++	 * BCM47XX uses 128MB for addressing the ram, if the system contains
++	 * less that that amount of ram it remaps the ram more often into the
++	 * available space.
++	 * Accessing memory after 128MB will cause an exception.
++	 * max contains the biggest possible address supported by the platform.
++	 * If the method wants to try something above we assume 128MB ram.
+ 	 */
++	max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
+ 	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
++		if (((unsigned long)(prom_init) + mem) > max) {
++			mem = (128 << 20);
++			printk("assume 128MB RAM\n");
++			break;
++		}
+ 		if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
+ 		    *(unsigned long *)(prom_init))
+ 			break;
+ 	}
+ 
+-	/* Ignoring the last page when ddr size is 128M. Cached
+-	 * accesses to last page is causing the processor to prefetch
+-	 * using address above 128M stepping out of the ddr address
+-	 * space.
+-	 */
+-	if (mem == 0x8000000)
+-		mem -= 0x1000;
+-
+ 	add_memory_region(0, mem, BOOT_MEM_RAM);
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-2.6.35/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.35/210-b44_phy_fix.patch
new file mode 100644
index 0000000000..1f8de8d9be
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/210-b44_phy_fix.patch
@@ -0,0 +1,66 @@
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44
+ 	__b44_set_flow_ctrl(bp, pause_enab);
+ }
+ 
+-#ifdef SSB_DRIVER_MIPS
++#ifdef CONFIG_SSB_DRIVER_MIPS
+ extern char *nvram_get(char *name);
+ static void b44_wap54g10_workaround(struct b44 *bp)
+ {
+@@ -421,12 +421,45 @@ static inline void b44_wap54g10_workarou
+ }
+ #endif
+ 
++#ifdef CONFIG_SSB_DRIVER_MIPS
++static inline int startswith (const char *source, const char *cmp) 
++{ 
++       return !strncmp(source,cmp,strlen(cmp)); 
++}
++
++#define getvar(str) (nvram_get(str) ? : "")
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++	if (simple_strtoul(getvar("boardnum"), NULL, 0) == 100) {
++		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	} else {
++		/* WL-HDD */
++		struct ssb_device *sdev = bp->sdev;
++		if (startswith(getvar("hardware_version"), "WL300-")) 
++		{
++			if (sdev->bus->sprom.et0phyaddr == 0 &&
++			    sdev->bus->sprom.et1phyaddr == 1)
++				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++		}
++	}
++	return;
++}
++
++#else
++static inline void b44_bcm47xx_workarounds(struct b44 *bp) 
++{ 
++}
++#endif
++
+ static int b44_setup_phy(struct b44 *bp)
+ {
+ 	u32 val;
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2089,6 +2122,8 @@ static int __devinit b44_get_invariants(
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-2.6.35/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.35/220-bcm5354.patch
new file mode 100644
index 0000000000..1d75e171d3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/220-bcm5354.patch
@@ -0,0 +1,42 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco
+ void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+                              u32 *plltype, u32 *n, u32 *m)
+ {
++	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++		return;
+ 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ 	switch (*plltype) {
+@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+ void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+ 				 u32 *plltype, u32 *n, u32 *m)
+ {
++	if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
++		return;
+ 	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+ 	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+ 	switch (*plltype) {
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -217,6 +217,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ 
+ 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
+ 		rate = 200000000;
++	} else if (bus->chip_id == 0x5354) {
++		rate = 240000000;
+ 	} else {
+ 		rate = ssb_calc_clock_rate(pll_type, n, m);
+ 	}
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+ 
+ 	if (bus->chip_id == 0x5365) {
+ 		rate = 100000000;
++	} else if (bus->chip_id == 0x5354) {
++		rate = 120000000;
+ 	} else {
+ 		rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
+ 		if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
diff --git a/target/linux/brcm47xx/patches-2.6.35/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.35/250-ohci-ssb-usb2.patch
new file mode 100644
index 0000000000..25b27e47e8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/250-ohci-ssb-usb2.patch
@@ -0,0 +1,60 @@
+---
+ drivers/usb/host/ohci-ssb.c |   39 ++++++++++++++++++++++++++++++++++++---
+ 1 file changed, 36 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de
+ 	int err = -ENOMEM;
+ 	u32 tmp, flags = 0;
+ 
+-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
++	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
++		/* Put the device into host-mode. */
+ 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+-
+-	ssb_device_enable(dev, flags);
++		ssb_device_enable(dev, flags);
++	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++		/*
++		 * USB 2.0 special considerations:
++		 *
++		 * 1. Since the core supports both OHCI and EHCI functions, it must
++		 *    only be reset once.
++		 *
++		 * 2. In addition to the standard SSB reset sequence, the Host Control
++		 *    Register must be programmed to bring the USB core and various
++		 *    phy components out of reset.
++		 */
++		ssb_device_enable(dev, 0);
++		ssb_write32(dev, 0x200, 0x7ff);
++		udelay(1);
++		if (dev->id.revision == 1) { // bug in rev 1
++
++			/* Change Flush control reg */
++			tmp = ssb_read32(dev, 0x400);
++			tmp &= ~8;
++			ssb_write32(dev, 0x400, tmp);
++			tmp = ssb_read32(dev, 0x400);
++			printk("USB20H fcr: 0x%0x\n", tmp);
++
++			/* Change Shim control reg */
++			tmp = ssb_read32(dev, 0x304);
++			tmp &= ~0x100;
++			ssb_write32(dev, 0x304, tmp);
++			tmp = ssb_read32(dev, 0x304);
++			printk("USB20H shim: 0x%0x\n", tmp);
++		}
++	} else
++		ssb_device_enable(dev, 0);
+ 
+ 	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+ 			dev_name(dev->dev));
+@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de
+ static const struct ssb_device_id ssb_ohci_table[] = {
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ 	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ 	SSB_DEVTABLE_END
+ };
+ MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
diff --git a/target/linux/brcm47xx/patches-2.6.35/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.35/260-ohci-set-dma-mask.patch
new file mode 100644
index 0000000000..9627798472
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/260-ohci-set-dma-mask.patch
@@ -0,0 +1,16 @@
+---
+ drivers/usb/host/ohci-ssb.c |    3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -106,6 +106,9 @@ static int ssb_ohci_attach(struct ssb_de
+ 	int err = -ENOMEM;
+ 	u32 tmp, flags = 0;
+ 
++	if (ssb_dma_set_mask(dev, DMA_BIT_MASK(32)))
++		return -EOPNOTSUPP;
++
+ 	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+ 		/* Put the device into host-mode. */
+ 		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
diff --git a/target/linux/brcm47xx/patches-2.6.35/270-ehci-ssb.patch b/target/linux/brcm47xx/patches-2.6.35/270-ehci-ssb.patch
new file mode 100644
index 0000000000..22ba8f8ba0
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/270-ehci-ssb.patch
@@ -0,0 +1,264 @@
+---
+ drivers/usb/host/Kconfig    |   13 ++
+ drivers/usb/host/ehci-hcd.c |   12 ++
+ drivers/usb/host/ehci-ssb.c |  201 ++++++++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ohci-ssb.c |   23 +++++
+ 4 files changed, 247 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -150,6 +150,19 @@ config USB_OXU210HP_HCD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called oxu210hp-hcd.
+ 
++config USB_EHCI_HCD_SSB
++	bool "EHCI support for Broadcom SSB EHCI core"
++	depends on USB_EHCI_HCD && SSB && EXPERIMENTAL
++	default n
++	---help---
++	  Support for the Sonics Silicon Backplane (SSB) attached
++	  Broadcom USB EHCI core.
++
++	  This device is present in some embedded devices with
++	  Broadcom based SSB bus.
++
++	  If unsure, say N.
++
+ config USB_ISP116X_HCD
+ 	tristate "ISP116X HCD support"
+ 	depends on USB
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
+ #define	PLATFORM_DRIVER		ehci_atmel_driver
+ #endif
+ 
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++#include "ehci-ssb.c"
++#define SSB_EHCI_DRIVER		ssb_ehci_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+     !defined(XILINX_OF_PLATFORM_DRIVER)
+--- /dev/null
++++ b/drivers/usb/host/ehci-ssb.c
+@@ -0,0 +1,158 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom USB-core EHCI driver (SSB bus glue)
++ *
++ * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ *
++ * Derived from the OHCI-SSB driver
++ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ *
++ * Derived from the EHCI-PCI driver
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/ssb/ssb.h>
++
++#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
++
++struct ssb_ehci_device {
++	struct ehci_hcd ehci; /* _must_ be at the beginning. */
++
++	u32 enable_flags;
++};
++
++static inline
++struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
++{
++	return (struct ssb_ehci_device *)(hcd->hcd_priv);
++}
++
++static int ssb_ehci_reset(struct usb_hcd *hcd)
++{
++	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++	int err;
++
++	ehci->caps = hcd->regs;
++	ehci->regs = hcd->regs +
++		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++
++	dbg_hcs_params(ehci, "reset");
++	dbg_hcc_params(ehci, "reset");
++
++	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++	err = ehci_halt(ehci);
++
++	if (err)
++		return err;
++
++	err = ehci_init(hcd);
++
++	if (err)
++		return err;
++
++	ehci_reset(ehci);
++
++	return err;
++}
++
++static const struct hc_driver ssb_ehci_hc_driver = {
++	.description		= "ssb-usb-ehci",
++	.product_desc		= "SSB EHCI Controller",
++	.hcd_priv_size		= sizeof(struct ssb_ehci_device),
++
++	.irq			= ehci_irq,
++	.flags			= HCD_MEMORY | HCD_USB2,
++
++	.reset			= ssb_ehci_reset,
++	.start			= ehci_run,
++	.stop			= ehci_stop,
++	.shutdown		= ehci_shutdown,
++
++	.urb_enqueue		= ehci_urb_enqueue,
++	.urb_dequeue		= ehci_urb_dequeue,
++	.endpoint_disable	= ehci_endpoint_disable,
++	.endpoint_reset		= ehci_endpoint_reset,
++
++	.get_frame_number	= ehci_get_frame,
++
++	.hub_status_data	= ehci_hub_status_data,
++	.hub_control		= ehci_hub_control,
++	.bus_suspend		= ehci_bus_suspend,
++	.bus_resume		= ehci_bus_resume,
++	.relinquish_port	= ehci_relinquish_port,
++	.port_handed_over	= ehci_port_handed_over,
++
++	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd)
++{
++	if (hcd->driver->shutdown)
++		hcd->driver->shutdown(hcd);
++
++	usb_remove_hcd(hcd);
++
++	iounmap(hcd->regs);
++	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++
++	usb_put_hcd(hcd);
++}
++EXPORT_SYMBOL_GPL(ssb_ehci_detach);
++
++static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd)
++{
++	struct ssb_ehci_device *ehcidev;
++	struct usb_hcd *hcd;
++	int err = -ENOMEM;
++	u32 tmp, flags = 0;
++
++	hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
++			     dev_name(dev->dev));
++	if (!hcd)
++		goto err_dev_disable;
++
++	ehcidev = hcd_to_ssb_ehci(hcd);
++	ehcidev->enable_flags = flags;
++	tmp = ssb_read32(dev, SSB_ADMATCH0);
++	hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
++	hcd->rsrc_len = 0x100; /* ehci reg block size */
++	/*
++	 * start & size modified per sbutils.c
++	 */
++	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++	if (!hcd->regs)
++		goto err_put_hcd;
++	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED | IRQF_DISABLED);
++	if (err)
++		goto err_iounmap;
++
++	*ehci_hcd = hcd;
++
++	return err;
++
++err_iounmap:
++	iounmap(hcd->regs);
++err_put_hcd:
++	usb_put_hcd(hcd);
++err_dev_disable:
++	ssb_device_disable(dev, flags);
++	return err;
++}
++EXPORT_SYMBOL_GPL(ssb_ehci_attach);
++
++static const struct ssb_device_id ssb_ehci_table[] = {
++	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
++	SSB_DEVTABLE_END
++};
++MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -17,6 +17,8 @@
+  */
+ #include <linux/ssb/ssb.h>
+ 
++extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd);
++extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd);
+ 
+ #define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
+ 
+@@ -24,6 +26,7 @@ struct ssb_ohci_device {
+ 	struct ohci_hcd ohci; /* _must_ be at the beginning. */
+ 
+ 	u32 enable_flags;
++	struct usb_hcd *ehci_hcd;
+ };
+ 
+ static inline
+@@ -92,13 +95,25 @@ static const struct hc_driver ssb_ohci_h
+ static void ssb_ohci_detach(struct ssb_device *dev)
+ {
+ 	struct usb_hcd *hcd = ssb_get_drvdata(dev);
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
++#endif
+ 
+ 	usb_remove_hcd(hcd);
+ 	iounmap(hcd->regs);
+ 	usb_put_hcd(hcd);
++
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++	/*
++	 * Also detach ehci function
++	 */
++	if (dev->id.coreid == SSB_DEV_USB20_HOST)
++		ssb_ehci_detach(dev, ohcidev->ehci_hcd);
++#endif
+ 	ssb_device_disable(dev, 0);
+ }
+ 
++
+ static int ssb_ohci_attach(struct ssb_device *dev)
+ {
+ 	struct ssb_ohci_device *ohcidev;
+@@ -165,6 +180,14 @@ static int ssb_ohci_attach(struct ssb_de
+ 
+ 	ssb_set_drvdata(dev, hcd);
+ 
++#ifdef CONFIG_USB_EHCI_HCD_SSB
++	/*
++	 * attach ehci function in this core
++	 */
++	if (dev->id.coreid == SSB_DEV_USB20_HOST)
++		err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd));
++#endif
++
+ 	return err;
+ 
+ err_iounmap:
diff --git a/target/linux/brcm47xx/patches-2.6.35/275-usb2-bcm5354-init.patch b/target/linux/brcm47xx/patches-2.6.35/275-usb2-bcm5354-init.patch
new file mode 100644
index 0000000000..3d8327ebfd
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/275-usb2-bcm5354-init.patch
@@ -0,0 +1,63 @@
+This patch significantly improves the reliability of high speed 
+usb writes on the bcm5354. It implements a work around for version 2
+of the usb20 core that was cribbed from the GPL sources for the 
+Asus wl500gpv2 and verified against the wl520gu sources.
+
+Reference:
+GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
+GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c
+
+Signed-off-by: Steve Brown <sbrown@cortland.com>
+
+---
+ drivers/usb/host/ohci-ssb.c |   37 +++++++++++++++++++++++--------------
+ 1 file changed, 23 insertions(+), 14 deletions(-)
+
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de
+ 		 */
+ 		ssb_device_enable(dev, 0);
+ 		ssb_write32(dev, 0x200, 0x7ff);
++
++		/* Change Flush control reg */
++		tmp = ssb_read32(dev, 0x400);
++		tmp &= ~8;
++		ssb_write32(dev, 0x400, tmp);
++		tmp = ssb_read32(dev, 0x400);
++
++		/* Change Shim control reg */
++		tmp = ssb_read32(dev, 0x304);
++		tmp &= ~0x100;
++		ssb_write32(dev, 0x304, tmp);
++		tmp = ssb_read32(dev, 0x304);
++
+ 		udelay(1);
+-		if (dev->id.revision == 1) { // bug in rev 1
+ 
+-			/* Change Flush control reg */
+-			tmp = ssb_read32(dev, 0x400);
+-			tmp &= ~8;
+-			ssb_write32(dev, 0x400, tmp);
+-			tmp = ssb_read32(dev, 0x400);
+-			printk("USB20H fcr: 0x%0x\n", tmp);
+-
+-			/* Change Shim control reg */
+-			tmp = ssb_read32(dev, 0x304);
+-			tmp &= ~0x100;
+-			ssb_write32(dev, 0x304, tmp);
+-			tmp = ssb_read32(dev, 0x304);
+-			printk("USB20H shim: 0x%0x\n", tmp);
++		/* Work around for 5354 failures */
++		if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++			/* Change syn01 reg */
++			tmp = 0x00fe00fe;
++			ssb_write32(dev, 0x894, tmp);
++
++			/* Change syn03 reg */
++			tmp = ssb_read32(dev, 0x89c);
++			tmp |= 0x1;
++			ssb_write32(dev, 0x89c, tmp);
+ 		}
+ 	} else
+ 		ssb_device_enable(dev, 0);
diff --git a/target/linux/brcm47xx/patches-2.6.35/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-2.6.35/280-activate_ssb_support_in_usb.patch
new file mode 100644
index 0000000000..1a50c1a9dc
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/280-activate_ssb_support_in_usb.patch
@@ -0,0 +1,16 @@
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig |    2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -141,6 +141,8 @@ config SSB_DRIVER_MIPS
+ config SSB_EMBEDDED
+ 	bool
+ 	depends on SSB_DRIVER_MIPS
++	select USB_EHCI_HCD_SSB if USB_EHCI_HCD
++	select USB_OHCI_HCD_SSB if USB_OHCI_HCD
+ 	default y
+ 
+ config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-2.6.35/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.35/300-fork_cacheflush.patch
new file mode 100644
index 0000000000..686fb1b945
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/300-fork_cacheflush.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -32,7 +32,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ 	unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-2.6.35/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-2.6.35/301-kmod-fuse-dcache-bug-r4k.patch
new file mode 100644
index 0000000000..e960dbaccf
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/301-kmod-fuse-dcache-bug-r4k.patch
@@ -0,0 +1,31 @@
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
+ 	}
+ }
+ 
+-static void r4k___flush_cache_all(void)
++void r4k___flush_cache_all(void)
+ {
+ 	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1);
+ }
+@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
+ 	}
+ }
+ 
+-static void r4k_flush_cache_page(struct vm_area_struct *vma,
++void r4k_flush_cache_page(struct vm_area_struct *vma,
+ 	unsigned long addr, unsigned long pfn)
+ {
+ 	struct flush_cache_page_args args;
+@@ -1456,3 +1456,10 @@ void __cpuinit r4k_cache_init(void)
+ 	coherency_setup();
+ #endif
+ }
++
++// fuse package DCACHE BUG patch exports
++void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
++void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
++        unsigned long pfn) = r4k_flush_cache_page;
++EXPORT_SYMBOL(fuse_flush_cache_page);
++EXPORT_SYMBOL(fuse_flush_cache_all);
diff --git a/target/linux/brcm47xx/patches-2.6.35/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.35/310-no_highpage.patch
new file mode 100644
index 0000000000..af2289b080
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/310-no_highpage.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -43,6 +43,7 @@
+ #ifndef __ASSEMBLY__
+ 
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ #include <asm/io.h>
+ 
+ extern void build_clear_page(void);
+@@ -78,13 +79,16 @@ static inline void clear_user_page(void 
+ 		flush_data_cache_page((unsigned long)addr);
+ }
+ 
+-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+-	struct page *to);
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++	struct page *to)
++{
++	extern void (*flush_data_cache_page)(unsigned long addr);
+ 
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++	copy_page(vto, vfrom);
++	if (!cpu_has_ic_fills_f_dc ||
++	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++		flush_data_cache_page((unsigned long)vto);
++}
+ 
+ /*
+  * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -204,30 +204,6 @@ void kunmap_coherent(void)
+ 	preempt_check_resched();
+ }
+ 
+-void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma)
+-{
+-	void *vfrom, *vto;
+-
+-	vto = kmap_atomic(to, KM_USER1);
+-	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+-	    page_mapped(from) && !Page_dcache_dirty(from)) {
+-		vfrom = kmap_coherent(from, vaddr);
+-		copy_page(vto, vfrom);
+-		kunmap_coherent();
+-	} else {
+-		vfrom = kmap_atomic(from, KM_USER0);
+-		copy_page(vto, vfrom);
+-		kunmap_atomic(vfrom, KM_USER0);
+-	}
+-	if ((!cpu_has_ic_fills_f_dc) ||
+-	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+-		flush_data_cache_page((unsigned long)vto);
+-	kunmap_atomic(vto, KM_USER1);
+-	/* Make sure this page is cleared on other CPU's too before using it */
+-	smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
diff --git a/target/linux/brcm47xx/patches-2.6.35/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.35/400-arch-bcm47xx.patch
new file mode 100644
index 0000000000..16388bea17
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/400-arch-bcm47xx.patch
@@ -0,0 +1,319 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -62,6 +62,7 @@ config BCM47XX
+ 	select SSB_DRIVER_MIPS
+ 	select SSB_DRIVER_EXTIF
+ 	select SSB_EMBEDDED
++	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+ 	select SYS_HAS_EARLY_PRINTK
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+ 
+-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
+--- a/arch/mips/bcm47xx/irq.c
++++ b/arch/mips/bcm47xx/irq.c
+@@ -1,5 +1,6 @@
+ /*
+  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
++ *  Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+  *
+  *  This program is free software; you can redistribute  it and/or modify it
+  *  under  the terms of  the GNU General  Public License as published by the
+@@ -23,10 +24,19 @@
+  */
+ 
+ #include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
++#include <linux/pci.h>
++#include <linux/ssb/ssb.h>
++
+ #include <asm/irq_cpu.h>
+ 
++
++extern struct ssb_bus ssb_bcm47xx;
++
++
+ void plat_irq_dispatch(void)
+ {
+ 	u32 cause;
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -24,10 +24,10 @@
+ #include <asm/io.h>
+ #include <asm/uaccess.h>
+ 
+-#include <nvram.h>
++#include "include/nvram.h"
+ 
+ #define MB * 1048576
+-extern struct ssb_bus ssb;
++extern struct ssb_bus ssb_bcm47xx;
+ 
+ static char nvram_buf[NVRAM_SPACE];
+ static int cfe_env;
+@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c
+ /* Probe for NVRAM header */
+ static void __init early_nvram_init(void)
+ {
+-	struct ssb_mipscore *mcore = &ssb.mipscore;
++	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ 	struct nvram_header *header;
+ 	int i;
+ 	u32 base, lim, off;
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -2,7 +2,7 @@
+  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+  *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+- *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
++ *  Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de>
+  *
+  *  This program is free software; you can redistribute  it and/or modify it
+  *  under  the terms of  the GNU General  Public License as published by the
+@@ -25,18 +25,28 @@
+  *  675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+ 
++#include <linux/init.h>
+ #include <linux/types.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/tty.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+-#include <bcm47xx.h>
+ #include <asm/fw/cfe/cfe_api.h>
++#include <linux/pm.h>
++
++#include "include/nvram.h"
+ 
+ struct ssb_bus ssb_bcm47xx;
+ EXPORT_SYMBOL(ssb_bcm47xx);
+ 
++extern void bcm47xx_pci_init(void);
++
+ static void bcm47xx_machine_restart(char *command)
+ {
+ 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
+@@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void)
+ 		cpu_relax();
+ }
+ 
+-static void str2eaddr(char *str, char *dest)
++static void e_aton(char *str, char *dest)
+ {
+ 	int i = 0;
+ 
+@@ -73,51 +83,142 @@ static void str2eaddr(char *str, char *d
+ 	}
+ }
+ 
+-static int bcm47xx_get_invariants(struct ssb_bus *bus,
+-				   struct ssb_init_invariants *iv)
++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
++{
++	char *s;
++
++	memset(sprom, 0xFF, sizeof(struct ssb_sprom));
++
++	sprom->revision = 1;
++	if ((s = nvram_get("il0macaddr")))
++		e_aton(s, sprom->il0mac);
++	if ((s = nvram_get("et0macaddr")))
++		e_aton(s, sprom->et0mac);
++	if ((s = nvram_get("et1macaddr")))
++		e_aton(s, sprom->et1mac);
++	if ((s = nvram_get("et0phyaddr")))
++		sprom->et0phyaddr = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("et1phyaddr")))
++		sprom->et1phyaddr = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("et0mdcport")))
++		sprom->et0mdcport = !!simple_strtoul(s, NULL, 10);
++	if ((s = nvram_get("et1mdcport")))
++		sprom->et1mdcport = !!simple_strtoul(s, NULL, 10);
++	if ((s = nvram_get("pa0b0")))
++		sprom->pa0b0 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa0b1")))
++		sprom->pa0b1 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa0b2")))
++		sprom->pa0b2 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa1b0")))
++		sprom->pa1b0 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa1b1")))
++		sprom->pa1b1 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa1b2")))
++		sprom->pa1b2 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("wl0gpio0")))
++		sprom->gpio0 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("wl0gpio1")))
++		sprom->gpio1 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("wl0gpio2")))
++		sprom->gpio2 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("wl0gpio3")))
++		sprom->gpio3 = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa0maxpwr")))
++		sprom->maxpwr_bg = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa1maxpwr")))
++		sprom->maxpwr_a = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa0itssit")))
++		sprom->itssi_bg = simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("pa1itssit")))
++		sprom->itssi_a = simple_strtoul(s, NULL, 0);
++	sprom->boardflags_lo = 0;
++	if ((s = nvram_get("boardflags")))
++		sprom->boardflags_lo = simple_strtoul(s, NULL, 0);
++	sprom->boardflags_hi = 0;
++	if ((s = nvram_get("boardflags2")))
++		sprom->boardflags_hi = simple_strtoul(s, NULL, 0);
++}
++
++static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv)
+ {
+-	char buf[100];
++	char *s;
++
++	iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
++	if ((s = nvram_get("boardtype")))
++		iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0);
++	if ((s = nvram_get("boardrev")))
++		iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0);
+ 
+-	/* Fill boardinfo structure */
+-	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
++	bcm47xx_fill_sprom(&iv->sprom);
+ 
+-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+-		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
+-
+-	/* Fill sprom structure */
+-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
+-	iv->sprom.revision = 3;
+-
+-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et0mac);
+-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+-		str2eaddr(buf, iv->sprom.et1mac);
+-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
+-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
++	if ((s = nvram_get("cardbus")))
++		iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10);
+ 
+ 	return 0;
+ }
+ 
+ void __init plat_mem_setup(void)
+ {
+-	int err;
++	int i, err;
++	char *s;
++	struct ssb_mipscore *mcore;
++
++	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants);
++	if (err) {
++		const char *msg = "Failed to initialize SSB bus (err %d)\n";
++		printk(msg, err); /* Make sure the message gets out of the box. */
++		panic(msg, err);
++	}
++	mcore = &ssb_bcm47xx.mipscore;
+ 
+-	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
+-				      bcm47xx_get_invariants);
+-	if (err)
+-		panic("Failed to initialize SSB bus (err %d)\n", err);
++	s = nvram_get("kernel_args");
++	if (s && !strncmp(s, "console=ttyS1", 13)) {
++		struct ssb_serial_port port;
++
++		printk("Swapping serial ports!\n");
++		/* swap serial ports */
++		memcpy(&port, &mcore->serial_ports[0], sizeof(port));
++		memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
++		memcpy(&mcore->serial_ports[1], &port, sizeof(port));
++	}
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++		struct uart_port s;
++
++		memset(&s, 0, sizeof(s));
++		s.line = i;
++		s.mapbase = (unsigned int) port->regs;
++		s.membase = port->regs;
++		s.irq = port->irq + 2;
++		s.uartclk = port->baud_base;
++		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++		s.iotype = SERIAL_IO_MEM;
++		s.regshift = port->reg_shift;
++
++		early_serial_setup(&s);
++	}
++	printk("Serial init done.\n");
+ 
+ 	_machine_restart = bcm47xx_machine_restart;
+ 	_machine_halt = bcm47xx_machine_halt;
+ 	pm_power_off = bcm47xx_machine_halt;
+ }
++
++static int __init bcm47xx_register_gpiodev(void)
++{
++	static struct resource res = {
++		.start = 0xFFFFFFFF,
++	};
++	struct platform_device *pdev;
++
++	pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
++	if (!pdev) {
++		printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
++		return -ENODEV;
++	}
++
++	return 0;
++}
++device_initcall(bcm47xx_register_gpiodev);
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -22,11 +22,17 @@
+  *  675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+ 
+-
+ #include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/serial_reg.h>
++#include <linux/interrupt.h>
+ #include <linux/ssb/ssb.h>
++#include <asm/addrspace.h>
++#include <asm/io.h>
+ #include <asm/time.h>
+-#include <bcm47xx.h>
++
++extern struct ssb_bus ssb_bcm47xx;
+ 
+ void __init plat_time_init(void)
+ {
diff --git a/target/linux/brcm47xx/patches-2.6.35/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.35/601-mips-remove-pci-collision-check.patch
new file mode 100644
index 0000000000..7860ca0dd8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/601-mips-remove-pci-collision-check.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
+ 		if ((idx == PCI_ROM_RESOURCE) &&
+ 				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+ 			continue;
+-		if (!r->start && r->end) {
+-			printk(KERN_ERR "PCI: Device %s not available "
+-			       "because of resource collisions\n",
++		if (!r->start && r->end)
++			printk(KERN_WARNING "PCI: Device %s resource"
++			       "collisions detected. Ignoring...\n",
+ 			       pci_name(dev));
+-			return -EINVAL;
+-		}
+ 		if (r->flags & IORESOURCE_IO)
+ 			cmd |= PCI_COMMAND_IO;
+ 		if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-2.6.35/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-2.6.35/610-pci_ide_fix.patch
new file mode 100644
index 0000000000..f254b203bd
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/610-pci_ide_fix.patch
@@ -0,0 +1,14 @@
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
+ 	hw->io_ports.ctl_addr = ctl_addr;
+ }
+ 
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS	2
++#else
+ #define MAX_HWIFS	10
++#endif
+ 
+ /*
+  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/brcm47xx/patches-2.6.35/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.35/700-ssb-gigabit-ethernet-driver.patch
new file mode 100644
index 0000000000..384b925a06
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/700-ssb-gigabit-ethernet-driver.patch
@@ -0,0 +1,329 @@
+--- a/drivers/net/tg3.c
++++ b/drivers/net/tg3.c
+@@ -41,6 +41,7 @@
+ #include <linux/prefetch.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/firmware.h>
++#include <linux/ssb/ssb_driver_gige.h>
+ 
+ #include <net/checksum.h>
+ #include <net/ip.h>
+@@ -471,8 +472,9 @@ static void _tw32_flush(struct tg3 *tp, 
+ static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
+ {
+ 	tp->write32_mbox(tp, off, val);
+-	if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+-	    !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
++	if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
++	    (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
++	     !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
+ 		tp->read32_mbox(tp, off);
+ }
+ 
+@@ -482,7 +484,7 @@ static void tg3_write32_tx_mbox(struct t
+ 	writel(val, mbox);
+ 	if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
+ 		writel(val, mbox);
+-	if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
++	if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
+ 		readl(mbox);
+ }
+ 
+@@ -783,7 +785,7 @@ static void tg3_switch_clocks(struct tg3
+ 
+ #define PHY_BUSY_LOOPS	5000
+ 
+-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
+ {
+ 	u32 frame_val;
+ 	unsigned int loops;
+@@ -797,7 +799,7 @@ static int tg3_readphy(struct tg3 *tp, i
+ 
+ 	*val = 0x0;
+ 
+-	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ 		      MI_COM_PHY_ADDR_MASK);
+ 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ 		      MI_COM_REG_ADDR_MASK);
+@@ -832,7 +834,12 @@ static int tg3_readphy(struct tg3 *tp, i
+ 	return ret;
+ }
+ 
+-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++{
++	return __tg3_readphy(tp, tp->phy_addr, reg, val);
++}
++
++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
+ {
+ 	u32 frame_val;
+ 	unsigned int loops;
+@@ -848,7 +855,7 @@ static int tg3_writephy(struct tg3 *tp, 
+ 		udelay(80);
+ 	}
+ 
+-	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ 		      MI_COM_PHY_ADDR_MASK);
+ 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ 		      MI_COM_REG_ADDR_MASK);
+@@ -881,6 +888,11 @@ static int tg3_writephy(struct tg3 *tp, 
+ 	return ret;
+ }
+ 
++static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++{
++	return __tg3_writephy(tp, tp->phy_addr, reg, val);
++}
++
+ static int tg3_bmcr_reset(struct tg3 *tp)
+ {
+ 	u32 phy_control;
+@@ -2389,6 +2401,9 @@ static int tg3_nvram_read(struct tg3 *tp
+ {
+ 	int ret;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++		return -ENODEV;
++
+ 	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
+ 		return tg3_nvram_read_using_eeprom(tp, offset, val);
+ 
+@@ -2720,8 +2735,10 @@ static int tg3_set_power_state(struct tg
+ 	tg3_frob_aux_power(tp);
+ 
+ 	/* Workaround for unstable PLL clock */
+-	if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+-	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
++	if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
++				/* !!! FIXME !!! */
++	    ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
++	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
+ 		u32 val = tr32(0x7d00);
+ 
+ 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
+@@ -3214,6 +3231,14 @@ relink:
+ 
+ 		tg3_phy_copper_begin(tp);
+ 
++		if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
++			current_link_up = 1;
++			current_speed = SPEED_1000; //FIXME
++			current_duplex = DUPLEX_FULL;
++			tp->link_config.active_speed = current_speed;
++			tp->link_config.active_duplex = current_duplex;
++		}
++
+ 		tg3_readphy(tp, MII_BMSR, &tmp);
+ 		if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
+ 		    (tmp & BMSR_LSTATUS))
+@@ -6675,6 +6700,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+ 	int i;
+ 	u32 val;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* We don't use firmware. */
++		return 0;
++	}
++
+ 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ 		/* Wait up to 20ms for init done. */
+ 		for (i = 0; i < 200; i++) {
+@@ -6958,6 +6988,14 @@ static int tg3_chip_reset(struct tg3 *tp
+ 		tw32(0x5000, 0x400);
+ 	}
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* BCM4785: In order to avoid repercussions from using potentially
++		 * defective internal ROM, stop the Rx RISC CPU, which is not
++		 * required. */
++		tg3_stop_fw(tp);
++		tg3_halt_cpu(tp, RX_CPU_BASE);
++	}
++
+ 	tw32(GRC_MODE, tp->grc_mode);
+ 
+ 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
+@@ -7135,9 +7173,12 @@ static int tg3_halt_cpu(struct tg3 *tp, 
+ 		return -ENODEV;
+ 	}
+ 
+-	/* Clear firmware's nvram arbitration. */
+-	if (tp->tg3_flags & TG3_FLAG_NVRAM)
+-		tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++	if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
++		/* Clear firmware's nvram arbitration. */
++		if (tp->tg3_flags & TG3_FLAG_NVRAM)
++			tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++	}
++
+ 	return 0;
+ }
+ 
+@@ -7199,6 +7240,11 @@ static int tg3_load_5701_a0_firmware_fix
+ 	const __be32 *fw_data;
+ 	int err, i;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* We don't use firmware. */
++		return 0;
++	}
++
+ 	fw_data = (void *)tp->fw->data;
+ 
+ 	/* Firmware blob starts with version numbers, followed by
+@@ -7256,6 +7302,11 @@ static int tg3_load_tso_firmware(struct 
+ 	unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
+ 	int err, i;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* We don't use firmware. */
++		return 0;
++	}
++
+ 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ 		return 0;
+ 
+@@ -8380,6 +8431,11 @@ static void tg3_timer(unsigned long __op
+ 
+ 	spin_lock(&tp->lock);
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++		/* BCM4785: Flush posted writes from GbE to host memory. */
++		tr32(HOSTCC_MODE);
++	}
++
+ 	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ 		/* All of this garbage is because when using non-tagged
+ 		 * IRQ status the mailbox/status_block protocol the chip
+@@ -10279,6 +10335,11 @@ static int tg3_test_nvram(struct tg3 *tp
+ 	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+ 		return 0;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* We don't have NVRAM. */
++		return 0;
++	}
++
+ 	if (tg3_nvram_read(tp, 0, &magic) != 0)
+ 		return -EIO;
+ 
+@@ -11098,7 +11159,7 @@ static int tg3_ioctl(struct net_device *
+ 			return -EAGAIN;
+ 
+ 		spin_lock_bh(&tp->lock);
+-		err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
++		err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
+ 		spin_unlock_bh(&tp->lock);
+ 
+ 		data->val_out = mii_regval;
+@@ -11114,7 +11175,7 @@ static int tg3_ioctl(struct net_device *
+ 			return -EAGAIN;
+ 
+ 		spin_lock_bh(&tp->lock);
+-		err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
++		err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ 		spin_unlock_bh(&tp->lock);
+ 
+ 		return err;
+@@ -11759,6 +11820,12 @@ static void __devinit tg3_get_5717_nvram
+ /* Chips other than 5700/5701 use the NVRAM for fetching info. */
+ static void __devinit tg3_nvram_init(struct tg3 *tp)
+ {
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++		/* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
++		tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
++		return;
++	}
++
+ 	tw32_f(GRC_EEPROM_ADDR,
+ 	     (EEPROM_ADDR_FSM_RESET |
+ 	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
+@@ -12020,6 +12087,9 @@ static int tg3_nvram_write_block(struct 
+ {
+ 	int ret;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++		return -ENODEV;
++
+ 	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
+ 		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
+@@ -13360,6 +13430,11 @@ static int __devinit tg3_get_invariants(
+ 	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
+ 		tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+ 
++	if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++		tp->write32_tx_mbox = tg3_write_flush_reg32;
++		tp->write32_rx_mbox = tg3_write_flush_reg32;
++	}
++
+ 	/* Get eeprom hw config before calling tg3_set_power_state().
+ 	 * In particular, the TG3_FLG2_IS_NIC flag must be
+ 	 * determined before calling tg3_set_power_state() so that
+@@ -13753,6 +13828,10 @@ static int __devinit tg3_get_device_addr
+ 	}
+ 
+ 	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
++		if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++			ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
++	}
++	if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ #ifdef CONFIG_SPARC
+ 		if (!tg3_get_default_macaddr_sparc(tp))
+ 			return 0;
+@@ -14272,6 +14351,7 @@ static char * __devinit tg3_phy_string(s
+ 	case TG3_PHY_ID_BCM5704:	return "5704";
+ 	case TG3_PHY_ID_BCM5705:	return "5705";
+ 	case TG3_PHY_ID_BCM5750:	return "5750";
++	case TG3_PHY_ID_BCM5750_2:	return "5750-2";
+ 	case TG3_PHY_ID_BCM5752:	return "5752";
+ 	case TG3_PHY_ID_BCM5714:	return "5714";
+ 	case TG3_PHY_ID_BCM5780:	return "5780";
+@@ -14481,6 +14561,13 @@ static int __devinit tg3_init_one(struct
+ 		tp->msg_enable = tg3_debug;
+ 	else
+ 		tp->msg_enable = TG3_DEF_MSG_ENABLE;
++	if (pdev_is_ssb_gige_core(pdev)) {
++		tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
++		if (ssb_gige_must_flush_posted_writes(pdev))
++			tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
++		if (ssb_gige_have_roboswitch(pdev))
++			tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
++	}
+ 
+ 	/* The word/byte swap controls here control register access byte
+ 	 * swapping.  DMA data byte swapping is controlled in the GRC_MODE
+--- a/drivers/net/tg3.h
++++ b/drivers/net/tg3.h
+@@ -2014,6 +2014,9 @@
+ #define  NIC_SRAM_RGMII_INBAND_DISABLE	 0x00000004
+ #define  NIC_SRAM_RGMII_EXT_IBND_RX_EN	 0x00000008
+ #define  NIC_SRAM_RGMII_EXT_IBND_TX_EN	 0x00000010
++#define TG3_FLG3_IS_SSB_CORE		0x00000800
++#define TG3_FLG3_FLUSH_POSTED_WRITES	0x00001000
++#define TG3_FLG3_ROBOSWITCH		0x00002000
+ 
+ #define NIC_SRAM_RX_MINI_BUFFER_DESC	0x00001000
+ 
+@@ -2930,6 +2933,7 @@ struct tg3 {
+ #define TG3_PHY_ID_BCM5704		0x60008190
+ #define TG3_PHY_ID_BCM5705		0x600081a0
+ #define TG3_PHY_ID_BCM5750		0x60008180
++#define TG3_PHY_ID_BCM5750_2		0xbc050cd0
+ #define TG3_PHY_ID_BCM5752		0x60008100
+ #define TG3_PHY_ID_BCM5714		0x60008340
+ #define TG3_PHY_ID_BCM5780		0x60008350
+@@ -2964,7 +2968,8 @@ struct tg3 {
+ 	 (X) == TG3_PHY_ID_BCM5755 || (X) == TG3_PHY_ID_BCM5756 || \
+ 	 (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
+ 	 (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
+-	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM8002)
++	 (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM8002 || \
++	 (X) == TG3_PHY_ID_BCM5750_2)
+ 
+ 	u32				led_ctrl;
+ 	u32				phy_otp;
diff --git a/target/linux/brcm47xx/patches-2.6.35/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.35/800-fix_cfe_detection.patch
new file mode 100644
index 0000000000..a298055708
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/800-fix_cfe_detection.patch
@@ -0,0 +1,108 @@
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -32,6 +32,7 @@
+ #include <asm/fw/cfe/cfe_error.h>
+ 
+ static int cfe_cons_handle;
++static void (* __prom_putchar)(char c);
+ 
+ const char *get_system_type(void)
+ {
+@@ -40,65 +41,40 @@ const char *get_system_type(void)
+ 
+ void prom_putchar(char c)
+ {
++	if (__prom_putchar)
++		__prom_putchar(c);
++}
++
++void prom_putchar_cfe(char c)
++{
+ 	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+ 		;
+ }
+ 
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ 	uint32_t cfe_ept;
+ 	uint32_t cfe_handle;
+ 	uint32_t cfe_eptseal;
+-	int argc = fw_arg0;
+-	char **envp = (char **) fw_arg2;
+-	int *prom_vec = (int *) fw_arg3;
+-
+-	/*
+-	 * Check if a loader was used; if NOT, the 4 arguments are
+-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+-	 */
+-	if (argc < 0) {
+-		cfe_handle = (uint32_t)argc;
+-		cfe_ept = (uint32_t)envp;
+-		cfe_eptseal = (uint32_t)prom_vec;
+-	} else {
+-		if ((int)prom_vec < 0) {
+-			/*
+-			 * Old loader; all it gives us is the handle,
+-			 * so use the "known" entrypoint and assume
+-			 * the seal.
+-			 */
+-			cfe_handle = (uint32_t)prom_vec;
+-			cfe_ept = 0xBFC00500;
+-			cfe_eptseal = CFE_EPTSEAL;
+-		} else {
+-			/*
+-			 * Newer loaders bundle the handle/ept/eptseal
+-			 * Note: prom_vec is in the loader's useg
+-			 * which is still alive in the TLB.
+-			 */
+-			cfe_handle = prom_vec[0];
+-			cfe_ept = prom_vec[2];
+-			cfe_eptseal = prom_vec[3];
+-		}
+-	}
+ 
+-	if (cfe_eptseal != CFE_EPTSEAL) {
+-		/* too early for panic to do any good */
+-		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+-		while (1) ;
+-	}
++	cfe_eptseal = (uint32_t) fw_arg3;
++	cfe_handle = (uint32_t) fw_arg0;
++	cfe_ept = (uint32_t) fw_arg2;
++
++	if (cfe_eptseal != CFE_EPTSEAL)
++		return -1;
+ 
+ 	cfe_init(cfe_handle, cfe_ept);
++	return 0;
+ }
+ 
+-static __init void prom_init_console(void)
++static __init void prom_init_console_cfe(void)
+ {
+ 	/* Initialize CFE console */
+ 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+ }
+ 
+-static __init void prom_init_cmdline(void)
++static __init void prom_init_cmdline_cfe(void)
+ {
+ 	static char buf[COMMAND_LINE_SIZE] __initdata;
+ 
+@@ -160,9 +136,12 @@ static __init void prom_init_mem(void)
+ 
+ void __init prom_init(void)
+ {
+-	prom_init_cfe();
+-	prom_init_console();
+-	prom_init_cmdline();
++	if (prom_init_cfe() == 0) {
++		//prom_init_console_cfe();
++		//prom_init_cmdline_cfe();
++		__prom_putchar = prom_putchar_cfe;
++	}
++
+ 	prom_init_mem();
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-2.6.35/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-2.6.35/812-disable_wgt634u_crap.patch
new file mode 100644
index 0000000000..846c770182
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/812-disable_wgt634u_crap.patch
@@ -0,0 +1,177 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -3,4 +3,4 @@
+ # under Linux.
+ #
+ 
+-obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
++obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ /dev/null
+@@ -1,166 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+- */
+-
+-#include <linux/platform_device.h>
+-#include <linux/module.h>
+-#include <linux/leds.h>
+-#include <linux/mtd/physmap.h>
+-#include <linux/ssb/ssb.h>
+-#include <linux/interrupt.h>
+-#include <linux/reboot.h>
+-#include <linux/gpio.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-/* GPIO definitions for the WGT634U */
+-#define WGT634U_GPIO_LED	3
+-#define WGT634U_GPIO_RESET	2
+-#define WGT634U_GPIO_TP1	7
+-#define WGT634U_GPIO_TP2	6
+-#define WGT634U_GPIO_TP3	5
+-#define WGT634U_GPIO_TP4	4
+-#define WGT634U_GPIO_TP5	1
+-
+-static struct gpio_led wgt634u_leds[] = {
+-	{
+-		.name = "power",
+-		.gpio = WGT634U_GPIO_LED,
+-		.active_low = 1,
+-		.default_trigger = "heartbeat",
+-	},
+-};
+-
+-static struct gpio_led_platform_data wgt634u_led_data = {
+-	.num_leds =     ARRAY_SIZE(wgt634u_leds),
+-	.leds =         wgt634u_leds,
+-};
+-
+-static struct platform_device wgt634u_gpio_leds = {
+-	.name =         "leds-gpio",
+-	.id =           -1,
+-	.dev = {
+-		.platform_data = &wgt634u_led_data,
+-	}
+-};
+-
+-
+-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+-   firmware. */
+-static struct mtd_partition wgt634u_partitions[] = {
+-	{
+-		.name       = "cfe",
+-		.offset     = 0,
+-		.size       = 0x60000,		/* 384k */
+-		.mask_flags = MTD_WRITEABLE 	/* force read-only */
+-	},
+-	{
+-		.name   = "config",
+-		.offset = 0x60000,
+-		.size   = 0x20000		/* 128k */
+-	},
+-	{
+-		.name   = "linux",
+-		.offset = 0x80000,
+-		.size   = 0x140000 		/* 1280k */
+-	},
+-	{
+-		.name   = "jffs",
+-		.offset = 0x1c0000,
+-		.size   = 0x620000 		/* 6272k */
+-	},
+-	{
+-		.name   = "nvram",
+-		.offset = 0x7e0000,
+-		.size   = 0x20000		/* 128k */
+-	},
+-};
+-
+-static struct physmap_flash_data wgt634u_flash_data = {
+-	.parts    = wgt634u_partitions,
+-	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
+-};
+-
+-static struct resource wgt634u_flash_resource = {
+-	.flags = IORESOURCE_MEM,
+-};
+-
+-static struct platform_device wgt634u_flash = {
+-	.name          = "physmap-flash",
+-	.id            = 0,
+-	.dev           = { .platform_data = &wgt634u_flash_data, },
+-	.resource      = &wgt634u_flash_resource,
+-	.num_resources = 1,
+-};
+-
+-/* Platform devices */
+-static struct platform_device *wgt634u_devices[] __initdata = {
+-	&wgt634u_flash,
+-	&wgt634u_gpio_leds,
+-};
+-
+-static irqreturn_t gpio_interrupt(int irq, void *ignored)
+-{
+-	int state;
+-
+-	/* Interrupts are shared, check if the current one is
+-	   a GPIO interrupt. */
+-	if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+-				   SSB_CHIPCO_IRQ_GPIO))
+-		return IRQ_NONE;
+-
+-	state = gpio_get_value(WGT634U_GPIO_RESET);
+-
+-	/* Interrupt are level triggered, revert the interrupt polarity
+-	   to clear the interrupt. */
+-	gpio_polarity(WGT634U_GPIO_RESET, state);
+-
+-	if (!state) {
+-		printk(KERN_INFO "Reset button pressed");
+-		ctrl_alt_del();
+-	}
+-
+-	return IRQ_HANDLED;
+-}
+-
+-static int __init wgt634u_init(void)
+-{
+-	/* There is no easy way to detect that we are running on a WGT634U
+-	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
+-	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+-	 */
+-
+-	u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
+-
+-	if (et0mac[0] == 0x00 &&
+-	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+-	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+-		struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+-
+-		printk(KERN_INFO "WGT634U machine detected.\n");
+-
+-		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+-				 gpio_interrupt, IRQF_SHARED,
+-				 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+-			gpio_direction_input(WGT634U_GPIO_RESET);
+-			gpio_intmask(WGT634U_GPIO_RESET, 1);
+-			ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+-					    SSB_CHIPCO_IRQ_GPIO,
+-					    SSB_CHIPCO_IRQ_GPIO);
+-		}
+-
+-		wgt634u_flash_data.width = mcore->flash_buswidth;
+-		wgt634u_flash_resource.start = mcore->flash_window;
+-		wgt634u_flash_resource.end = mcore->flash_window
+-					   + mcore->flash_window_size
+-					   - 1;
+-		return platform_add_devices(wgt634u_devices,
+-					    ARRAY_SIZE(wgt634u_devices));
+-	} else
+-		return -ENODEV;
+-}
+-
+-module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-2.6.35/900-disable_early_printk.patch b/target/linux/brcm47xx/patches-2.6.35/900-disable_early_printk.patch
new file mode 100644
index 0000000000..c5fb54bc80
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/900-disable_early_printk.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -65,7 +65,6 @@ config BCM47XX
+ 	select SSB_B43_PCI_BRIDGE if PCI
+ 	select SSB_PCICORE_HOSTMODE if PCI
+ 	select GENERIC_GPIO
+-	select SYS_HAS_EARLY_PRINTK
+ 	select CFE
+ 	help
+ 	 Support for BCM47XX based boards
diff --git a/target/linux/brcm47xx/patches-2.6.35/920-cache-wround.patch b/target/linux/brcm47xx/patches-2.6.35/920-cache-wround.patch
new file mode 100644
index 0000000000..b9b22256a3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/920-cache-wround.patch
@@ -0,0 +1,135 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -20,10 +20,25 @@
+ #ifdef CONFIG_BCM47XX
+ #include <asm/paccess.h>
+ #include <linux/ssb/ssb.h>
+-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void) {
++      return (*(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void*)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr) {
++      return (*(unsigned long *)addr);
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void*)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr) {
++      unsigned long x;
++      get_dbe(x, (unsigned long *)addr);;
++}
+ 
+-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+ #else
+ #define BCM4710_DUMMY_RREG()
+ 
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -707,6 +707,9 @@ build_get_pgde32(u32 **p, unsigned int t
+ #endif
+ 	uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+ 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -868,12 +871,12 @@ static void __cpuinit build_r4000_tlb_re
+ 		/* No need for uasm_i_nop */
+ 	}
+ 
+-#ifdef CONFIG_BCM47XX
+-	uasm_i_nop(&p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++	uasm_i_nop(&p);
++# endif
+ 	build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+ 
+@@ -885,6 +888,9 @@ static void __cpuinit build_r4000_tlb_re
+ 	build_update_entries(&p, K0, K1);
+ 	build_tlb_write_entry(&p, &l, &r, tlb_random);
+ 	uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(&p);
++#endif
+ 	uasm_i_eret(&p); /* return from trap */
+ 
+ #ifdef CONFIG_HUGETLB_PAGE
+@@ -1321,12 +1327,12 @@ build_r4000_tlbchange_handler_head(u32 *
+ 				   struct uasm_reloc **r, unsigned int pte,
+ 				   unsigned int ptr)
+ {
+-#ifdef CONFIG_BCM47XX
+-	uasm_i_nop(p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++# endif
+ 	build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
+ #endif
+ 
+@@ -1363,6 +1369,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+ 	build_update_entries(p, tmp, ptr);
+ 	build_tlb_write_entry(p, l, r, tlb_indexed);
+ 	uasm_l_leave(l, *p);
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	uasm_i_eret(p); /* return from trap */
+ 
+ #ifdef CONFIG_64BIT
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -22,6 +22,19 @@
+ #include <asm/page.h>
+ #include <asm/thread_info.h>
+ 
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++#  undef eret
++# endif
++# define eret 					\
++	.set push;				\
++	.set noreorder;				\
++	 nop; 					\
++	 nop;					\
++	 eret;					\
++	.set pop;
++#endif
++
+ #define PANIC_PIC(msg)					\
+ 		.set push;				\
+ 		.set	reorder;			\
+@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
+ 	.set	noat
+ #ifdef CONFIG_BCM47XX
+ 	nop
+-	nop
+ #endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
+ 	.set	push
+ 	.set	mips3
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++#endif
+ 	mfc0	k1, CP0_CAUSE
+ 	li	k0, 31<<2
+ 	andi	k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-2.6.35/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-2.6.35/940-bcm47xx-yenta.patch
new file mode 100644
index 0000000000..be266e206f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/940-bcm47xx-yenta.patch
@@ -0,0 +1,46 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -924,6 +924,8 @@ static unsigned int yenta_probe_irq(stru
+ 	 * Probe for usable interrupts using the force
+ 	 * register to generate bogus card status events.
+ 	 */
++#ifndef CONFIG_BCM47XX
++	/* WRT54G3G does not like this */
+ 	cb_writel(socket, CB_SOCKET_EVENT, -1);
+ 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+ 	reg = exca_readb(socket, I365_CSCINT);
+@@ -939,6 +941,7 @@ static unsigned int yenta_probe_irq(stru
+ 	}
+ 	cb_writel(socket, CB_SOCKET_MASK, 0);
+ 	exca_writeb(socket, I365_CSCINT, reg);
++#endif
+ 
+ 	mask = probe_irq_mask(val) & 0xffff;
+ 
+@@ -1022,6 +1025,10 @@ static void yenta_get_socket_capabilitie
+ 	else
+ 		socket->socket.irq_mask = 0;
+ 
++	/* irq mask probing is broken for the WRT54G3G */
++	if (socket->socket.irq_mask == 0)
++		socket->socket.irq_mask = 0x6f8;
++
+ 	dev_printk(KERN_INFO, &socket->dev->dev,
+ 		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ 		   socket->socket.irq_mask, socket->cb_irq);
+@@ -1260,6 +1267,15 @@ static int __devinit yenta_probe(struct 
+ 	dev_printk(KERN_INFO, &dev->dev,
+ 		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ 
++	/* Generate an interrupt on card insert/remove */
++	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++	/* Set up Multifunction Routing Status Register */
++	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++	/* Switch interrupts to parallelized */
++	config_writeb(socket, 0x92, 0x64);
++
+ 	yenta_fixup_parent_bridge(dev->subordinate);
+ 
+ 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-2.6.35/950-sbb-sysfs-files.patch b/target/linux/brcm47xx/patches-2.6.35/950-sbb-sysfs-files.patch
new file mode 100644
index 0000000000..ddb1f1b383
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/950-sbb-sysfs-files.patch
@@ -0,0 +1,45 @@
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -385,6 +385,34 @@ static int ssb_device_uevent(struct devi
+ 			     ssb_dev->id.revision);
+ }
+ 
++#define ssb_config_attr(attrib, field, format_string)					\
++static ssize_t													\
++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
++{																\
++	return sprintf (buf, format_string, dev_to_ssb_dev(dev)->field);		\
++}
++
++ssb_config_attr(core_num, core_index, "%u\n")
++ssb_config_attr(coreid, id.coreid, "0x%04x\n")
++ssb_config_attr(vendor, id.vendor, "0x%04x\n")
++ssb_config_attr(revision, id.revision, "%u\n")
++ssb_config_attr(irq, irq, "%u\n")
++static ssize_t
++name_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	return sprintf (buf, "%s\n", ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
++}
++
++static struct device_attribute ssb_device_attrs[] = {
++	__ATTR_RO(name),
++	__ATTR_RO(core_num),
++	__ATTR_RO(coreid),
++	__ATTR_RO(vendor),
++	__ATTR_RO(revision),
++	__ATTR_RO(irq),
++	__ATTR_NULL,
++};
++
+ static struct bus_type ssb_bustype = {
+ 	.name		= "ssb",
+ 	.match		= ssb_bus_match,
+@@ -394,6 +422,7 @@ static struct bus_type ssb_bustype = {
+ 	.suspend	= ssb_device_suspend,
+ 	.resume		= ssb_device_resume,
+ 	.uevent		= ssb_device_uevent,
++	.dev_attrs	= ssb_device_attrs,
+ };
+ 
+ static void ssb_buses_lock(void)
diff --git a/target/linux/brcm47xx/patches-2.6.35/951-brcm4716-defines.patch b/target/linux/brcm47xx/patches-2.6.35/951-brcm4716-defines.patch
new file mode 100644
index 0000000000..482dbad02e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.35/951-brcm4716-defines.patch
@@ -0,0 +1,104 @@
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -92,6 +92,14 @@ const char *ssb_core_name(u16 coreid)
+ 		return "ARM 1176";
+ 	case SSB_DEV_ARM_7TDMI:
+ 		return "ARM 7TDMI";
++	case SSB_DEV_ETHERNET_GBIT2:
++		return "Gigabit MAC";
++	case SSB_DEV_MIPS_74K:
++		return "MIPS 74k";
++	case SSB_DEV_DDR_CTRLR:
++		return "DDR1/2 memory controller";
++	case SSB_DEV_I2S:
++		return "I2S";
+ 	}
+ 	return "UNKNOWN";
+ }
+@@ -150,6 +158,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ 	case 0x4710:
+ 	case 0x4610:
+ 	case 0x4704:
++	case 0x4716:
+ 		return 9;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -151,9 +151,16 @@ struct ssb_bus_ops {
+ #define SSB_DEV_MINI_MACPHY	0x823
+ #define SSB_DEV_ARM_1176	0x824
+ #define SSB_DEV_ARM_7TDMI	0x825
++#define SSB_DEV_ETHERNET_GBIT2	0x82d
++#define SSB_DEV_MIPS_74K	0x82c
++#define SSB_DEV_DDR_CTRLR	0x82e
++#define SSB_DEV_I2S			0x834
++#define SSB_DEV_DEFAULT		0xfff
+ 
+ /* Vendor-ID values */
+ #define SSB_VENDOR_BROADCOM	0x4243
++#define SSB_VENDOR_BROADCOM2 0x04BF
++#define SSB_VENDOR_ARM		0x43b
+ 
+ /* Some kernel subsystems poke with dev->drvdata, so we must use the
+  * following ugly workaround to get from struct device to struct ssb_device */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -11,6 +11,7 @@
+ #define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
+ #define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
+ #define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
++#define SSB_AI_BASE		0x18100000		/* base for AI registers */
+ 
+ #define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
+ #define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
+@@ -26,6 +27,7 @@
+ #define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
+ #define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
+ 
++#define SSB_EROM_ASD_SZ_BASE 0x00001000
+ 
+ /* Enumeration space constants */
+ #define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
+@@ -453,5 +455,41 @@ enum {
+ #define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
+ #define SSB_ADM_BASE2_SHIFT		16
+ 
++/***** EROM defines for AI type busses *****/
++#define SSB_EROM_VALID			1
++#define SSB_EROM_END			0xe
++#define SSB_EROM_TAG			0xe
++/* Adress Space Descriptor */
++#define SSB_EROM_ASD			0x4
++#define SSB_EROM_ASD_SP_MASK	0x00000f00
++#define SSB_EROM_ASD_SP_SHIFT	8
++#define SSB_EROM_ASD_ST_MASK	0x000000c0
++#define SSB_EROM_ASD_ST_SLAVE	0x00000000
++#define SSB_EROM_ASD_ST_BRIDGE	0x00000040
++#define SSB_EROM_ASD_ST_MWRAP	0x000000c0
++#define SSB_EROM_ASD_ST_SWRAP	0x00000080
++#define SSB_EROM_ASD_ADDR_MASK	0xfffff000
++#define SSB_EROM_ASD_AG32		0x00000008
++#define SSB_EROM_ASD_SZ_MASK	0x00000030
++#define SSB_EROM_ASD_SZ_SZD		0x00000030
++#define SSB_EROM_ASD_SZ_SHIFT	4
++#define SSB_EROM_CI				0
++#define SSB_EROM_CIA_CID_MASK	0x000fff00
++#define SSB_EROM_CIA_CID_SHIFT	8
++#define SSB_EROM_CIA_MFG_MASK	0xfff00000
++#define SSB_EROM_CIA_MFG_SHIFT	20
++#define SSB_EROM_CIB_REV_MASK	0xff000000
++#define SSB_EROM_CIB_REV_SHIFT	24
++#define SSB_EROM_CIB_NMW_MASK	0x0007c000
++#define SSB_EROM_CIB_NSW_MASK	0x00f80000
++#define SSB_EROM_CIB_NSP_MASK	0x00003e00
++
++/***** Registers of AI config space *****/
++#define SSB_AI_RESETCTRL		0x800 /* maybe 0x804 for big endian */
++#define  SSB_AI_RESETCTRL_RESET	1
++#define SSB_AI_IOCTRL			0x408 /* maybe 0x40c for big endian */
++#define SSB_CF_FGC				0x0002
++#define SSB_CF_CLOCK_EN			0x001
++#define SSB_AI_oobselouta30		0x100
+ 
+ #endif /* LINUX_SSB_REGS_H_ */