Remove files now present upstream in files-2.6.25 (This is mostly just drivers/ssb and include/linux/ssb) [brcm47xx] Regenerate patches against 2.6.25.1 kernel+files set Default is still to build against 2.6.23.16

SVN-Revision: 11155

1 files changed, 0 insertions, 65 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch b/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
deleted file mode 100644
index 01bd9ffea2..0000000000
--- a/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c	2008-02-16 17:55:20.000000000 +0100
-+++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c	2008-02-16 17:55:35.000000000 +0100
-@@ -66,6 +66,7 @@ int pcibios_plat_dev_init(struct pci_dev
- 			base = &ssb_pcicore_pcibus_iobase;
- 		else
- 			base = &ssb_pcicore_pcibus_membase;
-+		res->flags |= IORESOURCE_PCI_FIXED;
- 		if (res->end) {
- 			size = res->end - res->start + 1;
- 			if (*base & (size - 1))
-@@ -88,10 +89,12 @@ int pcibios_plat_dev_init(struct pci_dev
- 
- static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
- {
-+	u8 lat;
-+
- 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
- 		return;
- 
--	ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
-+	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
- 
- 	/* Enable PCI bridge bus mastering and memory space */
- 	pci_set_master(dev);
-@@ -101,7 +104,10 @@ static void __init ssb_fixup_pcibridge(s
- 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
- 
- 	/* Make sure our latency is high enough to handle the devices behind us */
--	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
-+	lat = 168;
-+	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-+		   pci_name(dev), lat);
-+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
- 
-@@ -279,14 +285,14 @@ static struct resource ssb_pcicore_mem_r
- 	.name	= "SSB PCIcore external memory",
- 	.start	= SSB_PCI_DMA,
- 	.end	= SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
--	.flags	= IORESOURCE_MEM,
-+	.flags	= IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
- };
- 
- static struct resource ssb_pcicore_io_resource = {
- 	.name	= "SSB PCIcore external I/O",
- 	.start	= 0x100,
- 	.end	= 0x7FF,
--	.flags	= IORESOURCE_IO,
-+	.flags	= IORESOURCE_IO | IORESOURCE_PCI_FIXED,
- };
- 
- static struct pci_controller ssb_pcicore_controller = {
-@@ -344,7 +350,8 @@ static void ssb_pcicore_init_hostmode(st
- 	/* Ok, ready to run, register it to the system.
- 	 * The following needs change, if we want to port hostmode
- 	 * to non-MIPS platform. */
--	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
-+	ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
-+	set_io_port_base(ssb_pcicore_controller.io_map_base);
- 	/* Give some time to the PCI controller to configure itself with the new
- 	 * values. Not waiting at this point causes crashes of the machine. */
- 	mdelay(10);