First step to upgrade of brcm47xx to kernel version 2.6.25

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10939 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 65 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch b/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
new file mode 100644
index 0000000000..01bd9ffea2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.25/600-ssb-fix-pcidevices.patch
@@ -0,0 +1,65 @@
+Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c	2008-02-16 17:55:20.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c	2008-02-16 17:55:35.000000000 +0100
+@@ -66,6 +66,7 @@ int pcibios_plat_dev_init(struct pci_dev
+ 			base = &ssb_pcicore_pcibus_iobase;
+ 		else
+ 			base = &ssb_pcicore_pcibus_membase;
++		res->flags |= IORESOURCE_PCI_FIXED;
+ 		if (res->end) {
+ 			size = res->end - res->start + 1;
+ 			if (*base & (size - 1))
+@@ -88,10 +89,12 @@ int pcibios_plat_dev_init(struct pci_dev
+ 
+ static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
+ {
++	u8 lat;
++
+ 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ 		return;
+ 
+-	ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
++	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+ 
+ 	/* Enable PCI bridge bus mastering and memory space */
+ 	pci_set_master(dev);
+@@ -101,7 +104,10 @@ static void __init ssb_fixup_pcibridge(s
+ 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+ 
+ 	/* Make sure our latency is high enough to handle the devices behind us */
+-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
++	lat = 168;
++	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
++		   pci_name(dev), lat);
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
+ 
+@@ -279,14 +285,14 @@ static struct resource ssb_pcicore_mem_r
+ 	.name	= "SSB PCIcore external memory",
+ 	.start	= SSB_PCI_DMA,
+ 	.end	= SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
+-	.flags	= IORESOURCE_MEM,
++	.flags	= IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
+ };
+ 
+ static struct resource ssb_pcicore_io_resource = {
+ 	.name	= "SSB PCIcore external I/O",
+ 	.start	= 0x100,
+ 	.end	= 0x7FF,
+-	.flags	= IORESOURCE_IO,
++	.flags	= IORESOURCE_IO | IORESOURCE_PCI_FIXED,
+ };
+ 
+ static struct pci_controller ssb_pcicore_controller = {
+@@ -344,7 +350,8 @@ static void ssb_pcicore_init_hostmode(st
+ 	/* Ok, ready to run, register it to the system.
+ 	 * The following needs change, if we want to port hostmode
+ 	 * to non-MIPS platform. */
+-	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
++	ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
++	set_io_port_base(ssb_pcicore_controller.io_map_base);
+ 	/* Give some time to the PCI controller to configure itself with the new
+ 	 * values. Not waiting at this point causes crashes of the machine. */
+ 	mdelay(10);