nuke old 2.6.23 code for brcm47xx

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13910 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 159 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch
deleted file mode 100644
index b6b5c2619a..0000000000
--- a/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-Allow registering PCI devices after early boot.
-
-This is an ugly hack and needs to be rewritten before going upstream.
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -21,6 +21,17 @@
-  */
- int pci_probe_only;
- 
-+/*
-+ * Indicate whether PCI-bios init was already done.
-+ */
-+static int pcibios_init_done;
-+
-+/*
-+ * The currently used busnumber.
-+ */
-+static int next_busno;
-+static int need_domain_info;
-+
- #define PCI_ASSIGN_ALL_BUSSES	1
- 
- unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
-@@ -75,8 +86,32 @@
- 	res->start = start;
- }
- 
--void __devinit register_pci_controller(struct pci_controller *hose)
-+/* Most MIPS systems have straight-forward swizzling needs.  */
-+
-+static inline u8 bridge_swizzle(u8 pin, u8 slot)
-+{
-+	return (((pin - 1) + slot) % 4) + 1;
-+}
-+
-+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
- {
-+	u8 pin = *pinp;
-+
-+	while (dev->bus->parent) {
-+		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-+		/* Move up the chain of bridges. */
-+		dev = dev->bus->self;
-+        }
-+	*pinp = pin;
-+
-+	/* The slot is the slot of the last bridge. */
-+	return PCI_SLOT(dev->devfn);
-+}
-+
-+void register_pci_controller(struct pci_controller *hose)
-+{
-+	struct pci_bus *bus;
-+
- 	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
- 		goto out;
- 	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-@@ -84,9 +119,6 @@
- 		goto out;
- 	}
- 
--	*hose_tail = hose;
--	hose_tail = &hose->next;
--
- 	/*
- 	 * Do not panic here but later - this might hapen before console init.
- 	 */
-@@ -94,41 +126,47 @@
- 		printk(KERN_WARNING
- 		       "registering PCI controller with io_map_base unset\n");
- 	}
--	return;
- 
--out:
--	printk(KERN_WARNING
--	       "Skipping PCI bus scan due to resource conflict\n");
--}
-+	if (pcibios_init_done) {
-+		//TODO
- 
--/* Most MIPS systems have straight-forward swizzling needs.  */
-+		printk(KERN_INFO "Registering a PCI bus after boot\n");
- 
--static inline u8 bridge_swizzle(u8 pin, u8 slot)
--{
--	return (((pin - 1) + slot) % 4) + 1;
--}
-+		if (!hose->iommu)
-+			PCI_DMA_BUS_IS_PHYS = 1;
- 
--static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
--{
--	u8 pin = *pinp;
-+		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
-+		hose->bus = bus;
-+		need_domain_info = need_domain_info || hose->index;
-+		hose->need_domain_info = need_domain_info;
-+		if (bus) {
-+			next_busno = bus->subordinate + 1;
-+			/* Don't allow 8-bit bus number overflow inside the hose -
-+			   reserve some space for bridges. */
-+			if (next_busno > 224) {
-+				next_busno = 0;
-+				need_domain_info = 1;
-+			}
-+		}
-+		if (!pci_probe_only)
-+			pci_assign_unassigned_resources();
-+		pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+	} else {
-+		*hose_tail = hose;
-+		hose_tail = &hose->next;
-+	}
- 
--	while (dev->bus->parent) {
--		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
--		/* Move up the chain of bridges. */
--		dev = dev->bus->self;
--        }
--	*pinp = pin;
-+	return;
- 
--	/* The slot is the slot of the last bridge. */
--	return PCI_SLOT(dev->devfn);
-+out:
-+	printk(KERN_WARNING
-+	       "Skipping PCI bus scan due to resource conflict\n");
- }
- 
- static int __init pcibios_init(void)
- {
- 	struct pci_controller *hose;
- 	struct pci_bus *bus;
--	int next_busno;
--	int need_domain_info = 0;
- 
- 	/* Scan all of the recorded PCI controllers.  */
- 	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-@@ -157,6 +195,7 @@
- 	if (!pci_probe_only)
- 		pci_assign_unassigned_resources();
- 	pci_fixup_irqs(common_swizzle, pcibios_map_irq);
-+	pcibios_init_done = 1;
- 
- 	return 0;
- }
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1185,9 +1185,7 @@
- /* ssb must be initialized after PCI but before the ssb drivers.
-  * That means we must use some initcall between subsys_initcall
-  * and device_initcall. */
--//FIXME on embedded we need to be early to make sure we can register
--//      a new PCI bus, if needed.
--subsys_initcall(ssb_modinit);
-+fs_initcall(ssb_modinit);
- 
- static void __exit ssb_modexit(void)
- {