diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2013-09-16 21:09:10 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2013-09-16 21:09:10 +0000 |
| commit | c78e4fb220169b5ee8358f7b2582972c00b88fd7 (patch) | |
| tree | 92a03712c7eb03a09d8d2ab2cdd1b54ea84cfb9e /target/linux/brcm47xx/config-3.10 | |
| parent | 0294358e11cbcb9c754f4c6056a070e8b36b5dd8 (diff) | |
| download | upstream-c78e4fb220169b5ee8358f7b2582972c00b88fd7.tar.gz upstream-c78e4fb220169b5ee8358f7b2582972c00b88fd7.tar.bz2 upstream-c78e4fb220169b5ee8358f7b2582972c00b88fd7.zip | |
brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.
The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.
It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.
Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset
button, image to be used for upgrade from OEM firmware's web interface
Link to the wiki page I've created: <http://wiki.openwrt.org/toh/huawei/e970>
Issue:
* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
reset during kernel decompress.
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 38011
Diffstat (limited to 'target/linux/brcm47xx/config-3.10')
| -rw-r--r-- | target/linux/brcm47xx/config-3.10 | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10 index 614205fb78..9d4f503d07 100644 --- a/target/linux/brcm47xx/config-3.10 +++ b/target/linux/brcm47xx/config-3.10 @@ -59,6 +59,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_WDT=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y |