aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/base-files
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2013-02-20 15:31:43 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2013-02-20 15:31:43 +0000
commit9afdb046d32866fd161233a2861476bfaf845f6a (patch)
tree48a8dbbc84dc22a030dd60e0c74eb95330c14d31 /target/linux/brcm47xx/base-files
parent9622f68581cea9d607bbd641b89350c2420720d5 (diff)
downloadupstream-9afdb046d32866fd161233a2861476bfaf845f6a.tar.gz
upstream-9afdb046d32866fd161233a2861476bfaf845f6a.tar.bz2
upstream-9afdb046d32866fd161233a2861476bfaf845f6a.zip
brcm47xx: do not use vlan0 any more.
The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704
Diffstat (limited to 'target/linux/brcm47xx/base-files')
-rwxr-xr-xtarget/linux/brcm47xx/base-files/etc/init.d/netconfig80
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm2
-rw-r--r--target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm4
3 files changed, 43 insertions, 43 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
index 3839f9f106..61bcb25ddd 100755
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -81,10 +81,10 @@ start() {
BEGIN {
FS="="
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
+ c["lan_ifname"]="eth0.1"
+ c["wan_ifname"]="eth0.2"
+ c["vlan1ports"]="1 2 3 4 5"
+ c["vlan2ports"]="0 5"
getline < "/proc/diag/model"
model=$0
for (i = 0; i < 6; i++) {
@@ -95,8 +95,8 @@ start() {
getline < "/proc/switch/eth0/cpuport"
cpuport=$0
if (cpuport == "8") {
- c["vlan0ports"]="1 2 3 4 8"
- c["vlan1ports"]="0 8"
+ c["vlan1ports"]="1 2 3 4 8"
+ c["vlan2ports"]="0 8"
}
}
}
@@ -109,13 +109,13 @@ start() {
END {
if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
- c["vlan0ports"] = "0 1 2 3 8"
- c["vlan1ports"] = "4 8"
+ c["vlan1ports"] = "0 1 2 3 8"
+ c["vlan2ports"] = "4 8"
}
if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
@@ -123,23 +123,23 @@ start() {
}
if (model == "ASUS WL-330gE") {
c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0.0"
- c["vlan0ports"] = "4 5"
- c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0.1"
+ c["vlan1ports"] = "4 5"
+ c["vlan2ports"] = ""
}
if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if (model == "Dell TrueMobile 2300") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
@@ -147,18 +147,18 @@ start() {
c["wan_ifname"] = "eth1"
}
if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
# WL-500gP
- c["vlan0ports"] = "1 2 3 4 5"
- c["vlan1ports"] = "0 5"
+ c["vlan1ports"] = "1 2 3 4 5"
+ c["vlan2ports"] = "0 5"
} else {
# Generic BCM94704
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
@@ -171,8 +171,8 @@ start() {
}
# Buffalo WBR-B11 and Buffalo WBR-G54
if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
@@ -196,41 +196,41 @@ start() {
# Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
+ c["lan_ifname"]="eth0.1"
+ c["wan_ifname"]="eth0.2"
+ c["vlan1ports"]="1 2 3 4 5"
+ c["vlan2ports"]="0 5"
}
if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
- c["vlan0ports"]="0 1 2 3 5"
- c["vlan1ports"]="4 5"
+ c["vlan1ports"]="0 1 2 3 5"
+ c["vlan2ports"]="4 5"
}
if (model == "ASUS WL-500W") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
+ c["vlan1ports"] = "0 1 2 3 4 5u"
+ c["vlan2ports"] = ""
}
if (model == "OvisLink WL-1600GL") {
- c["lan_ifname"] = "eth0.0"
- c["wan_ifname"] = "eth0.1"
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
+ c["lan_ifname"] = "eth0.1"
+ c["wan_ifname"] = "eth0.2"
+ c["vlan1ports"] = "0 1 2 3 5"
+ c["vlan2ports"] = "4 5"
}
if (model == "SimpleTech SimpleShare NAS") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = ""
- c["vlan0ports"] = ""
c["vlan1ports"] = ""
+ c["vlan2ports"] = ""
}
- if (c["vlan0ports"] || c["vlan1ports"]) {
+ if (c["vlan1ports"] || c["vlan2ports"]) {
print "#### VLAN configuration "
print "config switch eth0"
print " option enable 1"
print ""
- vlan(0, "vlan0ports")
vlan(1, "vlan1ports")
+ vlan(2, "vlan2ports")
}
print "#### Loopback configuration"
print "config interface loopback"
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
index c7d0fc8da8..dd8fd6e9f6 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
@@ -3,7 +3,7 @@
failsafe_ip() {
[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
ifconfig eth0 0.0.0.0 down
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
}
[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index 0a8915080f..8c425a094e 100644
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -27,11 +27,11 @@ preinit_net_echo() {
# this would be easier if we blasted the message across all ports
# but we don't want packets leaking across interfaces
for port in $(seq 0 4); do {
- echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
port_net_echo $1
}; done
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
} || port_net_echo $1
}