diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2017-12-18 14:51:28 +0100 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-14 20:33:18 +0100 |
| commit | 7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd (patch) | |
| tree | c5c476f181ce2d564c3baa30bf8aab11817f7d7d /target/linux/brcm2708 | |
| parent | ce6c7691ec8c33409587ebbce6d6e0a8b2c4431b (diff) | |
| download | upstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.tar.gz upstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.tar.bz2 upstream-7f9f42d42eff837d2eca5b4862cbb3b1ccebbefd.zip | |
ar71xx: add support for ALFA Network AP91-5G
ALFA Network AP91-5G is a 5 GHz outdoor AP/CPE board, based on Atheros
AR7240 + AR9280.
Specification:
- 400/400/200 MHz (CPU/DDR/AHB)
- 32 MB of RAM (DDR1)
- 8 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 1T1R 5 GHz (AR9280), with ext. PA (SE5004L) and LNA, up to 27 dBm
- 6x LED (5 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART and LEDs headers on PCB
Flash instruction:
Use "factory" image in vendor GUI (in case of problems, make sure your
board has up to date firmware). Alternatively, TFTP in U-Boot can be
used: select option "2. Load system code then write to Flash via TFTP"
during early boot and use "sysupgrade" image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/brcm2708')
0 files changed, 0 insertions, 0 deletions