brcm2708: rename all patches from raspberrypi git tree to use 950 prefix

Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 133 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch
new file mode 100644
index 0000000000..09dcfa7a68
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch
@@ -0,0 +1,133 @@
+From 5c1128ebe6c7a4af3f1784a640df7f3698233e9d Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 13 Feb 2017 17:20:08 +0000
+Subject: [PATCH] clk-bcm2835: Add claim-clocks property
+
+The claim-clocks property can be used to prevent PLLs and dividers
+from being marked as critical. It contains a vector of clock IDs,
+as defined by dt-bindings/clock/bcm2835.h.
+
+Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and
+PLLH_PIX for the vc4_kms_v3d driver.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 14 +++++++++
+ drivers/clk/bcm/clk-bcm2835.c                      | 34 ++++++++++++++++++++--
+ 2 files changed, 46 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
+@@ -5,6 +5,8 @@
+ /dts-v1/;
+ /plugin/;
+ 
++#include <dt-bindings/clock/bcm2835.h>
++
+ / {
+ 	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+ 
+@@ -155,6 +157,18 @@
+ 		};
+ 	};
+ 
++	fragment@19 {
++		target = <&clocks>;
++		__overlay__  {
++			claim-clocks = <
++				BCM2835_PLLD_DSI0
++				BCM2835_PLLD_DSI1
++				BCM2835_PLLH_AUX
++				BCM2835_PLLH_PIX
++			>;
++		};
++	};
++
+ 	__overrides__ {
+ 		cma-256 = <0>,"+0-1-2-3-4";
+ 		cma-192 = <0>,"-0+1-2-3-4";
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1298,6 +1298,8 @@ static const struct clk_ops bcm2835_vpu_
+ 	.debug_init = bcm2835_clock_debug_init,
+ };
+ 
++static bool bcm2835_clk_is_claimed(const char *name);
++
+ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+ 					   const struct bcm2835_pll_data *data)
+ {
+@@ -1314,6 +1316,9 @@ static struct clk_hw *bcm2835_register_p
+ 	init.ops = &bcm2835_pll_clk_ops;
+ 	init.flags = CLK_IGNORE_UNUSED;
+ 
++	if (!bcm2835_clk_is_claimed(data->name))
++		init.flags |= CLK_IS_CRITICAL;
++
+ 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ 	if (!pll)
+ 		return NULL;
+@@ -1367,8 +1372,10 @@ bcm2835_register_pll_divider(struct bcm2
+ 	divider->div.table = NULL;
+ 
+ 	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
+-		init.flags |= CLK_IS_CRITICAL;
+-		divider->div.flags |= CLK_IS_CRITICAL;
++		if (!bcm2835_clk_is_claimed(data->source_pll))
++			init.flags |= CLK_IS_CRITICAL;
++		if (!bcm2835_clk_is_claimed(data->name))
++			divider->div.flags |= CLK_IS_CRITICAL;
+ 	}
+ 
+ 	divider->cprman = cprman;
+@@ -2104,6 +2111,8 @@ static const struct bcm2835_clk_desc clk
+ 		.ctl_reg = CM_PERIICTL),
+ };
+ 
++static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)];
++
+ /*
+  * Permanently take a reference on the parent of the SDRAM clock.
+  *
+@@ -2123,6 +2132,19 @@ static int bcm2835_mark_sdc_parent_criti
+ 	return clk_prepare_enable(parent);
+ }
+ 
++static bool bcm2835_clk_is_claimed(const char *name)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {
++		const char *clk_name = *(const char **)(clk_desc_array[i].data);
++		if (!strcmp(name, clk_name))
++		    return bcm2835_clk_claimed[i];
++	}
++
++	return false;
++}
++
+ static int bcm2835_clk_probe(struct platform_device *pdev)
+ {
+ 	struct device *dev = &pdev->dev;
+@@ -2132,6 +2154,7 @@ static int bcm2835_clk_probe(struct plat
+ 	const struct bcm2835_clk_desc *desc;
+ 	const size_t asize = ARRAY_SIZE(clk_desc_array);
+ 	size_t i;
++	u32 clk_id;
+ 	int ret;
+ 
+ 	cprman = devm_kzalloc(dev, sizeof(*cprman) +
+@@ -2147,6 +2170,13 @@ static int bcm2835_clk_probe(struct plat
+ 	if (IS_ERR(cprman->regs))
+ 		return PTR_ERR(cprman->regs);
+ 
++	memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed));
++	for (i = 0;
++	     !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks",
++					 i, &clk_id);
++	     i++)
++		bcm2835_clk_claimed[clk_id]= true;
++
+ 	memcpy(cprman->real_parent_names, cprman_parent_names,
+ 	       sizeof(cprman_parent_names));
+ 	of_clk_parent_fill(dev->of_node, cprman->real_parent_names,