brcm2708: rename all patches from raspberrypi git tree to use 950 prefix

Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 57 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch b/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch
new file mode 100644
index 0000000000..76b1bf3bbf
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch
@@ -0,0 +1,57 @@
+From 35a2c1524b21318228f0566d9a4ac53bf3138bdc Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Fri, 17 Feb 2017 09:47:11 +0000
+Subject: [PATCH] BCM270X_DT: Add SMSC ethernet controller to DT
+
+With an ethernet node in the DT, a suitable firmware can populate the
+local-mac-address property, removing the need for a downstream patch
+to the driver to read its MAC address from a module parameter.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 +
+ arch/arm/boot/dts/bcm2708-rpi-b.dts      | 1 +
+ arch/arm/boot/dts/bcm2709-rpi-2-b.dts    | 1 +
+ arch/arm/boot/dts/bcm2710-rpi-3-b.dts    | 1 +
+ 4 files changed, 4 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+@@ -1,6 +1,7 @@
+ /dts-v1/;
+ 
+ #include "bcm2708.dtsi"
++#include "bcm283x-rpi-smsc9514.dtsi"
+ 
+ / {
+ 	model = "Raspberry Pi Model B+";
+--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
+@@ -1,6 +1,7 @@
+ /dts-v1/;
+ 
+ #include "bcm2708.dtsi"
++#include "bcm283x-rpi-smsc9512.dtsi"
+ 
+ / {
+ 	model = "Raspberry Pi Model B";
+--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+@@ -1,6 +1,7 @@
+ /dts-v1/;
+ 
+ #include "bcm2709.dtsi"
++#include "bcm283x-rpi-smsc9514.dtsi"
+ 
+ / {
+ 	model = "Raspberry Pi 2 Model B";
+--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+@@ -5,6 +5,7 @@
+ #endif
+ 
+ #include "bcm2710.dtsi"
++#include "bcm283x-rpi-smsc9514.dtsi"
+ 
+ / {
+ 	model = "Raspberry Pi 3 Model B";