brcm2708: rename all patches from raspberrypi git tree to use 950 prefix

Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 146 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch b/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch
new file mode 100644
index 0000000000..b29aa8d7fb
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch
@@ -0,0 +1,146 @@
+From 6f92d02f7af5a9b5ed5ded7dbeb18bf2bbb2ad85 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 24 Feb 2015 13:40:50 +0000
+Subject: [PATCH] pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and
+ 46-53
+
+Contrary to the documentation, the BCM2835 GPIO controller actually has
+four interrupt lines - one each for the three IRQ groups and one common. Rather
+confusingly, the GPIO interrupt groups don't correspond directly with the GPIO
+control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and
+46-53 GPIO2.
+
+Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is
+cleaner to split out a function to process the interrupts for a single GPIO
+bank.
+
+This bug has only just been observed because GPIOs above 27 can only be
+accessed on an old Raspberry Pi with the optional P5 header fitted, where
+the pins are often used for I2S instead.
+---
+ drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++---------
+ 1 file changed, 39 insertions(+), 12 deletions(-)
+
+--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+@@ -47,6 +47,7 @@
+ #define MODULE_NAME "pinctrl-bcm2835"
+ #define BCM2835_NUM_GPIOS 54
+ #define BCM2835_NUM_BANKS 2
++#define BCM2835_NUM_IRQS  3
+ 
+ #define BCM2835_PIN_BITMAP_SZ \
+ 	DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
+@@ -88,13 +89,13 @@ enum bcm2835_pinconf_pull {
+ 
+ struct bcm2835_gpio_irqdata {
+ 	struct bcm2835_pinctrl *pc;
+-	int bank;
++	int irqgroup;
+ };
+ 
+ struct bcm2835_pinctrl {
+ 	struct device *dev;
+ 	void __iomem *base;
+-	int irq[BCM2835_NUM_BANKS];
++	int irq[BCM2835_NUM_IRQS];
+ 
+ 	/* note: locking assumes each bank will have its own unsigned long */
+ 	unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
+@@ -105,7 +106,7 @@ struct bcm2835_pinctrl {
+ 	struct gpio_chip gpio_chip;
+ 	struct pinctrl_gpio_range gpio_range;
+ 
+-	struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
++	struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS];
+ 	spinlock_t irq_lock[BCM2835_NUM_BANKS];
+ };
+ 
+@@ -391,17 +392,16 @@ static struct gpio_chip bcm2835_gpio_chi
+ 	.can_sleep = false,
+ };
+ 
+-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
++static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
++					unsigned int bank, u32 mask)
+ {
+-	struct bcm2835_gpio_irqdata *irqdata = dev_id;
+-	struct bcm2835_pinctrl *pc = irqdata->pc;
+-	int bank = irqdata->bank;
+ 	unsigned long events;
+ 	unsigned offset;
+ 	unsigned gpio;
+ 	unsigned int type;
+ 
+ 	events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
++	events &= mask;
+ 	events &= pc->enabled_irq_map[bank];
+ 	for_each_set_bit(offset, &events, 32) {
+ 		gpio = (32 * bank) + offset;
+@@ -409,7 +409,30 @@ static irqreturn_t bcm2835_gpio_irq_hand
+ 
+ 		generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
+ 	}
+-	return events ? IRQ_HANDLED : IRQ_NONE;
++
++	return (events != 0);
++}
++
++static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
++{
++	struct bcm2835_gpio_irqdata *irqdata = dev_id;
++	struct bcm2835_pinctrl *pc = irqdata->pc;
++	int handled = 0;
++
++	switch (irqdata->irqgroup) {
++	case 0: /* IRQ0 covers GPIOs 0-27 */
++		handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
++		break;
++	case 1: /* IRQ1 covers GPIOs 28-45 */
++		handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) |
++			  bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
++		break;
++	case 2: /* IRQ2 covers GPIOs 46-53 */
++		handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
++		break;
++	}
++
++	return handled ? IRQ_HANDLED : IRQ_NONE;
+ }
+ 
+ static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+@@ -998,8 +1021,6 @@ static int bcm2835_pinctrl_probe(struct
+ 	for (i = 0; i < BCM2835_NUM_BANKS; i++) {
+ 		unsigned long events;
+ 		unsigned offset;
+-		int len;
+-		char *name;
+ 
+ 		/* clear event detection flags */
+ 		bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
+@@ -1014,10 +1035,15 @@ static int bcm2835_pinctrl_probe(struct
+ 		for_each_set_bit(offset, &events, 32)
+ 			bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+ 
++		spin_lock_init(&pc->irq_lock[i]);
++	}
++
++	for (i = 0; i < BCM2835_NUM_IRQS; i++) {
++		int len;
++		char *name;
+ 		pc->irq[i] = irq_of_parse_and_map(np, i);
+ 		pc->irq_data[i].pc = pc;
+-		pc->irq_data[i].bank = i;
+-		spin_lock_init(&pc->irq_lock[i]);
++		pc->irq_data[i].irqgroup = i;
+ 
+ 		len = strlen(dev_name(pc->dev)) + 16;
+ 		name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
+@@ -1074,6 +1100,7 @@ static struct platform_driver bcm2835_pi
+ 	.remove = bcm2835_pinctrl_remove,
+ 	.driver = {
+ 		.name = MODULE_NAME,
++		.owner = THIS_MODULE,
+ 		.of_match_table = bcm2835_pinctrl_match,
+ 	},
+ };