brcm2708: rename all patches from raspberrypi git tree to use 950 prefix

Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 0 insertions, 101 deletions

diff --git a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch b/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch
deleted file mode 100644
index 444c287eed..0000000000
--- a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From fc25cd03ca1c696dacb74d2006c0f176ce800566 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Tue, 13 Dec 2016 15:15:10 -0800
-Subject: [PATCH] ARM: bcm2835: dt: Add the DSI module nodes and clocks.
-
-The modules stay disabled by default, and if you want to enable DSI
-you'll need an overlay that connects a panel to it.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi.dtsi |  8 +++++++
- arch/arm/boot/dts/bcm283x.dtsi     | 49 +++++++++++++++++++++++++++++++++++---
- 2 files changed, 54 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -84,3 +84,11 @@
- 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
- 	status = "okay";
- };
-+
-+&dsi0 {
-+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-+};
-+
-+&dsi1 {
-+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+};
---- a/arch/arm/boot/dts/bcm283x.dtsi
-+++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -93,10 +93,13 @@
- 			#clock-cells = <1>;
- 			reg = <0x7e101000 0x2000>;
- 
--			/* CPRMAN derives everything from the platform's
--			 * oscillator.
-+			/* CPRMAN derives almost everything from the
-+			 * platform's oscillator.  However, the DSI
-+			 * pixel clocks come from the DSI analog PHY.
- 			 */
--			clocks = <&clk_osc>;
-+			clocks = <&clk_osc>,
-+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
-+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
- 		};
- 
- 		rng@7e104000 {
-@@ -188,6 +191,26 @@
- 			interrupts = <2 14>; /* pwa1 */
- 		};
- 
-+		dsi0: dsi@7e209000 {
-+			compatible = "brcm,bcm2835-dsi0";
-+			reg = <0x7e209000 0x78>;
-+			interrupts = <2 4>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			#clock-cells = <1>;
-+
-+			clocks = <&clocks BCM2835_PLLA_DSI0>,
-+				 <&clocks BCM2835_CLOCK_DSI0E>,
-+				 <&clocks BCM2835_CLOCK_DSI0P>;
-+			clock-names = "phy", "escape", "pixel";
-+
-+			clock-output-names = "dsi0_byte",
-+					     "dsi0_ddr2",
-+					     "dsi0_ddr";
-+
-+			status = "disabled";
-+		};
-+
- 		aux: aux@0x7e215000 {
- 			compatible = "brcm,bcm2835-aux";
- 			#clock-cells = <1>;
-@@ -247,6 +270,26 @@
- 			interrupts = <2 1>;
- 		};
- 
-+		dsi1: dsi@7e700000 {
-+			compatible = "brcm,bcm2835-dsi1";
-+			reg = <0x7e700000 0x8c>;
-+			interrupts = <2 12>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			#clock-cells = <1>;
-+
-+			clocks = <&clocks BCM2835_PLLD_DSI1>,
-+				 <&clocks BCM2835_CLOCK_DSI1E>,
-+				 <&clocks BCM2835_CLOCK_DSI1P>;
-+			clock-names = "phy", "escape", "pixel";
-+
-+			clock-output-names = "dsi1_byte",
-+					     "dsi1_ddr2",
-+					     "dsi1_ddr";
-+
-+			status = "disabled";
-+		};
-+
- 		i2c1: i2c@7e804000 {
- 			compatible = "brcm,bcm2835-i2c";
- 			reg = <0x7e804000 0x1000>;