brcm2708: remove linux 4.4 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 75 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0500-overlays-Add-dpi18-overlay-1634.patch b/target/linux/brcm2708/patches-4.4/0500-overlays-Add-dpi18-overlay-1634.patch
deleted file mode 100644
index dff1e2da21..0000000000
--- a/target/linux/brcm2708/patches-4.4/0500-overlays-Add-dpi18-overlay-1634.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 729a4f56f3db3ad4ec5dbc740312abf8d44c183d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <pelwell@users.noreply.github.com>
-Date: Mon, 12 Sep 2016 13:46:56 +0100
-Subject: [PATCH] overlays: Add dpi18 overlay (#1634)
-
-Add support for 18-bit DPI displays. Although the dpi24 overlay could
-be used, this overlay leaves GPIOs 22-27 free for other uses.
----
- arch/arm/boot/dts/overlays/Makefile          |  1 +
- arch/arm/boot/dts/overlays/README            |  8 +++++++
- arch/arm/boot/dts/overlays/dpi18-overlay.dts | 31 ++++++++++++++++++++++++++++
- 3 files changed, 40 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -22,6 +22,7 @@ dtbo-$(RPI_DT_OVERLAYS) += audremap.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += dht11.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += dionaudio-loco.dtbo
-+dtbo-$(RPI_DT_OVERLAYS) += dpi18.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += dpi24.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += dwc-otg.dtbo
- dtbo-$(RPI_DT_OVERLAYS) += dwc2.dtbo
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -283,6 +283,14 @@ Load:   dtoverlay=dionaudio-loco
- Params: <None>
- 
- 
-+Name:   dpi18
-+Info:   Overlay for a generic 18-bit DPI display
-+        This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output
-+        2-3 seconds after the kernel has started.
-+Load:   dtoverlay=dpi18
-+Params: <None>
-+
-+
- Name:   dpi24
- Info:   Overlay for a generic 24-bit DPI display
-         This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts
-@@ -0,0 +1,31 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+	compatible = "brcm,bcm2708";
-+
-+	// There is no DPI driver module, but we need a platform device
-+	// node (that doesn't already use pinctrl) to hang the pinctrl
-+	// reference on - leds will do
-+
-+	fragment@0 {
-+		target = <&leds>;
-+		__overlay__ {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&dpi18_pins>;
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			dpi18_pins: dpi18_pins {
-+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
-+					     12 13 14 15 16 17 18 19 20
-+					     21>;
-+				brcm,function = <6>; /* alt2 */
-+				brcm,pull = <0>; /* no pull */
-+			};
-+		};
-+	};
-+};