brcm2708: remove linux 4.4 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 700 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0156-Aux-SPI-1-2-implementation.patch b/target/linux/brcm2708/patches-4.4/0156-Aux-SPI-1-2-implementation.patch
deleted file mode 100644
index f4d0436bfb..0000000000
--- a/target/linux/brcm2708/patches-4.4/0156-Aux-SPI-1-2-implementation.patch
+++ /dev/null
@@ -1,700 +0,0 @@
-From d8576480efc07f6abcf0ffbd0320ba15804fb22d Mon Sep 17 00:00:00 2001
-From: Fraser <github@frasersdev.net>
-Date: Tue, 23 Feb 2016 10:04:37 +1100
-Subject: [PATCH] Aux SPI 1&2 implementation
-
-Adds aux spi 1 & 2 devices to compatible raspberry PIs.
-* Minor config of the driver build environment to ensure they get built
-for CONFIG_ARCH_BCM2708 & CONFIG_ARCH_BCM2709 devices.
-* Adds the aux spi driver into the defconfigs as a module.
-* Adds the auxiliary and spi1/2 devices into the device tree in a
-disabled state
-* Provides decide tree overlays which enables the devices and gives
-users a degree of control over how they are setup.
----
- arch/arm/boot/dts/bcm2708_common.dtsi           | 34 ++++++++-
- arch/arm/boot/dts/overlays/Makefile             |  6 ++
- arch/arm/boot/dts/overlays/README               | 99 +++++++++++++++++++++++++
- arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 57 ++++++++++++++
- arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 69 +++++++++++++++++
- arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 81 ++++++++++++++++++++
- arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 57 ++++++++++++++
- arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 69 +++++++++++++++++
- arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 81 ++++++++++++++++++++
- arch/arm/configs/bcm2709_defconfig              |  1 +
- arch/arm/configs/bcmrpi_defconfig               |  1 +
- drivers/clk/bcm/Makefile                        |  2 +-
- drivers/spi/Kconfig                             |  2 +-
- 13 files changed, 556 insertions(+), 3 deletions(-)
- create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts
-
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -1,3 +1,4 @@
-+#include <dt-bindings/clock/bcm2835-aux.h>
- #include "skeleton.dtsi"
- 
- / {
-@@ -5,6 +6,7 @@
- 
- 	aliases {
- 		audio = &audio;
-+		aux = &aux;
- 		sound = &sound;
- 		soc = &soc;
- 		dma = &dma;
-@@ -19,6 +21,8 @@
- 		spi0 = &spi0;
- 		i2c0 = &i2c0;
- 		uart1 = &uart1;
-+		spi1 = &spi1;
-+		spi2 = &spi2;
- 		mmc = &mmc;
- 		i2c1 = &i2c1;
- 		i2c2 = &i2c2;
-@@ -186,6 +190,14 @@
- 			status = "disabled";
- 		};
- 
-+		aux: aux@0x7e215004 {
-+			compatible = "brcm,bcm2835-aux";
-+			#clock-cells = <1>;
-+			reg = <0x7e215000 0x8>;
-+			clocks = <&clk_core>;
-+			status = "disabled";
-+		};
-+
- 		uart1: uart@7e215040 {
- 			compatible = "brcm,bcm2835-aux-uart", "ns16550";
- 			reg = <0x7e215040 0x40>;
-@@ -194,7 +206,27 @@
- 			reg-shift = <2>;
- 			no-loopback-test;
- 			status = "disabled";
--	        };
-+		};
-+
-+		spi1: spi@7e215080 {
-+			compatible = "brcm,bcm2835-aux-spi";
-+			reg = <0x7e215080 0x40>, <0x7e215000 0x8>;
-+			interrupts = <1 29>;
-+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		spi2: spi@7e2150C0 {
-+			compatible = "brcm,bcm2835-aux-spi";
-+			reg = <0x7e2150C0 0x40>, <0x7e215000 0x8>;
-+			interrupts = <1 29>;
-+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
- 
- 		mmc: mmc@7e300000 {
- 			compatible = "brcm,bcm2835-mmc";
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -57,6 +57,12 @@ dtb-$(RPI_DT_OVERLAYS) += sdtweak-overla
- dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi1-1cs-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi1-2cs-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi1-3cs-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi2-1cs-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi2-2cs-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi2-3cs-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += spi-gpio35-39-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -713,6 +713,105 @@ Load:   dtoverlay=spi-gpio35-39
- Params: <None>
- 
- 
-+Name:   spi1-1cs
-+Info:   Enables spi1 with a single chip select (CS) line and associated spidev
-+        dev node. The gpio pin number for the CS line and spidev device node
-+        creation are configurable.
-+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
-+              A+, B+, Zero and PI2 B; as well as the Compute Module.
-+Load:   dtoverlay=spi1-1cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.0 (default
-+                                is 'okay' or enabled).
-+
-+
-+Name:   spi1-2cs
-+Info:   Enables spi1 with two chip select (CS) lines and associated spidev
-+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
-+        creation are configurable.
-+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
-+              A+, B+, Zero and PI2 B; as well as the Compute Module.
-+Load:   dtoverlay=spi1-2cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
-+        cs1_pin                 GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.0 (default
-+                                is 'okay' or enabled).
-+        cs1_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.1 (default
-+                                is 'okay' or enabled).
-+
-+
-+Name:   spi1-3cs
-+Info:   Enables spi1 with three chip select (CS) lines and associated spidev
-+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
-+        creation are configurable.
-+        N.B.: spi1 is only accessible on devices with a 40pin header, eg:
-+              A+, B+, Zero and PI2 B; as well as the Compute Module.
-+Load:   dtoverlay=spi1-3cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
-+        cs1_pin                 GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
-+        cs2_pin                 GPIO pin for CS2 (default 16 - BCM SPI1_CE2).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.0 (default
-+                                is 'okay' or enabled).
-+        cs1_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.1 (default
-+                                is 'okay' or enabled).
-+        cs2_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev1.2 (default
-+                                is 'okay' or enabled).
-+
-+
-+Name:   spi2-1cs
-+Info:   Enables spi2 with a single chip select (CS) line and associated spidev
-+        dev node. The gpio pin number for the CS line and spidev device node
-+        creation are configurable.
-+        N.B.: spi2 is only accessible with the Compute Module.
-+Load:   dtoverlay=spi2-1cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.0 (default
-+                                is 'okay' or enabled).
-+
-+
-+Name:   spi2-2cs
-+Info:   Enables spi2 with two chip select (CS) lines and associated spidev
-+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
-+        creation are configurable.
-+        N.B.: spi2 is only accessible with the Compute Module.
-+Load:   dtoverlay=spi2-2cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
-+        cs1_pin                 GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.0 (default
-+                                is 'okay' or enabled).
-+        cs1_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.1 (default
-+                                is 'okay' or enabled).
-+
-+
-+Name:   spi2-3cs
-+Info:   Enables spi2 with three chip select (CS) lines and associated spidev
-+        dev nodes. The gpio pin numbers for the CS lines and spidev device node
-+        creation are configurable.
-+        N.B.: spi2 is only accessible with the Compute Module.
-+Load:   dtoverlay=spi2-3cs,<param>=<val>
-+Params: cs0_pin                 GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
-+        cs1_pin                 GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
-+        cs2_pin                 GPIO pin for CS2 (default 45 - BCM SPI2_CE2).
-+        cs0_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.0 (default
-+                                is 'okay' or enabled).
-+        cs1_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.1 (default
-+                                is 'okay' or enabled).
-+        cs2_spidev              Set to 'disabled' to stop the creation of a
-+                                userspace device node /dev/spidev2.2 (default
-+                                is 'okay' or enabled).
-+
-+
- Name:   tinylcd35
- Info:   3.5" Color TFT Display by www.tinylcd.com
-         Options: Touch, RTC, keypad
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
-@@ -0,0 +1,57 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi1_pins: spi1_pins {
-+				brcm,pins = <19 20 21>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi1_cs_pins: spi1_cs_pins {
-+				brcm,pins = <18>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi1>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
-+			cs-gpios = <&gpio 18 1>;
-+			status = "okay";
-+
-+			spidev1_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs0_spidev = <&spidev1_0>,"status";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
-@@ -0,0 +1,69 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi1_pins: spi1_pins {
-+				brcm,pins = <19 20 21>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi1_cs_pins: spi1_cs_pins {
-+				brcm,pins = <18 17>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi1>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
-+			cs-gpios = <&gpio 18 1>, <&gpio 17 1>;
-+			status = "okay";
-+
-+			spidev1_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev1_1: spidev@1 {
-+				compatible = "spidev";
-+				reg = <1>;      /* CE1 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs1_pin  = <&spi1_cs_pins>,"brcm,pins:4",
-+			   <&frag1>,"cs-gpios:16";
-+		cs0_spidev = <&spidev1_0>,"status";
-+		cs1_spidev = <&spidev1_1>,"status";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
-@@ -0,0 +1,81 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi1_pins: spi1_pins {
-+				brcm,pins = <19 20 21>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi1_cs_pins: spi1_cs_pins {
-+				brcm,pins = <18 17 16>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi1>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
-+			cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>;
-+			status = "okay";
-+
-+			spidev1_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev1_1: spidev@1 {
-+				compatible = "spidev";
-+				reg = <1>;      /* CE1 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev1_2: spidev@2 {
-+				compatible = "spidev";
-+				reg = <2>;      /* CE2 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi1_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs1_pin  = <&spi1_cs_pins>,"brcm,pins:4",
-+			   <&frag1>,"cs-gpios:16";
-+		cs2_pin  = <&spi1_cs_pins>,"brcm,pins:8",
-+			   <&frag1>,"cs-gpios:28";
-+		cs0_spidev = <&spidev1_0>,"status";
-+		cs1_spidev = <&spidev1_1>,"status";
-+		cs2_spidev = <&spidev1_2>,"status";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
-@@ -0,0 +1,57 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi2_pins: spi2_pins {
-+				brcm,pins = <40 41 42>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi2_cs_pins: spi2_cs_pins {
-+				brcm,pins = <43>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi2>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
-+			cs-gpios = <&gpio 43 1>;
-+			status = "okay";
-+
-+			spidev2_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs0_spidev = <&spidev2_0>,"status";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
-@@ -0,0 +1,69 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi2_pins: spi2_pins {
-+				brcm,pins = <40 41 42>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi2_cs_pins: spi2_cs_pins {
-+				brcm,pins = <43 44>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi2>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
-+			cs-gpios = <&gpio 43 1>, <&gpio 44 1>;
-+			status = "okay";
-+
-+			spidev2_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev2_1: spidev@1 {
-+				compatible = "spidev";
-+				reg = <1>;      /* CE1 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs1_pin  = <&spi2_cs_pins>,"brcm,pins:4",
-+			   <&frag1>,"cs-gpios:16";
-+		cs0_spidev = <&spidev2_0>,"status";
-+		cs1_spidev = <&spidev2_1>,"status";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts
-@@ -0,0 +1,81 @@
-+/dts-v1/;
-+/plugin/;
-+
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			spi2_pins: spi2_pins {
-+				brcm,pins = <40 41 42>;
-+				brcm,function = <3>; /* alt4 */
-+			};
-+
-+			spi2_cs_pins: spi2_cs_pins {
-+				brcm,pins = <43 44 45>;
-+				brcm,function = <1>; /* output */
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spi2>;
-+		frag1: __overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
-+			cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>;
-+			status = "okay";
-+
-+			spidev2_0: spidev@0 {
-+				compatible = "spidev";
-+				reg = <0>;      /* CE0 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev2_1: spidev@1 {
-+				compatible = "spidev";
-+				reg = <1>;      /* CE1 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+
-+			spidev2_2: spidev@2 {
-+				compatible = "spidev";
-+				reg = <2>;      /* CE2 */
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				spi-max-frequency = <500000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&aux>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	__overrides__ {
-+		cs0_pin  = <&spi2_cs_pins>,"brcm,pins:0",
-+			   <&frag1>,"cs-gpios:4";
-+		cs1_pin  = <&spi2_cs_pins>,"brcm,pins:4",
-+			   <&frag1>,"cs-gpios:16";
-+		cs2_pin  = <&spi2_cs_pins>,"brcm,pins:8",
-+			   <&frag1>,"cs-gpios:28";
-+		cs0_spidev = <&spidev2_0>,"status";
-+		cs1_spidev = <&spidev2_1>,"status";
-+		cs2_spidev = <&spidev2_2>,"status";
-+	};
-+};
---- a/arch/arm/configs/bcm2709_defconfig
-+++ b/arch/arm/configs/bcm2709_defconfig
-@@ -601,6 +601,7 @@ CONFIG_I2C_BCM2708=m
- CONFIG_I2C_GPIO=m
- CONFIG_SPI=y
- CONFIG_SPI_BCM2835=m
-+CONFIG_SPI_BCM2835AUX=m
- CONFIG_SPI_SPIDEV=y
- CONFIG_PPS=m
- CONFIG_PPS_CLIENT_LDISC=m
---- a/arch/arm/configs/bcmrpi_defconfig
-+++ b/arch/arm/configs/bcmrpi_defconfig
-@@ -593,6 +593,7 @@ CONFIG_I2C_BCM2708=m
- CONFIG_I2C_GPIO=m
- CONFIG_SPI=y
- CONFIG_SPI_BCM2835=m
-+CONFIG_SPI_BCM2835AUX=m
- CONFIG_SPI_SPIDEV=y
- CONFIG_PPS=m
- CONFIG_PPS_CLIENT_LDISC=m
---- a/drivers/clk/bcm/Makefile
-+++ b/drivers/clk/bcm/Makefile
-@@ -4,7 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281
- obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
- obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
- obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709)	+= clk-bcm2835.o
--obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835-aux.o
-+obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709)	+= clk-bcm2835-aux.o
- obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-ns2.o
- obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o
- obj-$(CONFIG_ARCH_BCM_NSP)	+= clk-nsp.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -90,7 +90,7 @@ config SPI_BCM2835
- 
- config SPI_BCM2835AUX
- 	tristate "BCM2835 SPI auxiliary controller"
--	depends on ARCH_BCM2835 || COMPILE_TEST
-+	depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 || COMPILE_TEST
- 	depends on GPIOLIB
- 	help
- 	  This selects a driver for the Broadcom BCM2835 SPI aux master.