diff options
author | Álvaro Fernández Rojas <noltari@gmail.com> | 2017-02-07 22:30:59 +0100 |
---|---|---|
committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2017-02-07 23:00:21 +0100 |
commit | d9d090e52082635a24aeaefdc6bfe61ab97f38bb (patch) | |
tree | 6e725a11b5c44ee1a7ce95a0b2bcba4cae1e6f5c /target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch | |
parent | ada91d8a245690b3bc8d2a62b391d2725aea5c8e (diff) | |
download | upstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.tar.gz upstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.tar.bz2 upstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.zip |
brcm2708: remove linux 4.4 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch | 729 |
1 files changed, 0 insertions, 729 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch b/target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch deleted file mode 100644 index c66eb6d887..0000000000 --- a/target/linux/brcm2708/patches-4.4/0142-BCM270X_DT-Adjust-overlay-README-formatting.patch +++ /dev/null @@ -1,729 +0,0 @@ -From 0feb25cf50f89502ea7f2150f0fab1f9d40b138a Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.org> -Date: Mon, 8 Feb 2016 09:46:33 +0000 -Subject: [PATCH] BCM270X_DT: Adjust overlay README formatting - ---- - arch/arm/boot/dts/overlays/README | 414 +++++++++++++++++++------------------- - 1 file changed, 207 insertions(+), 207 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -83,58 +83,58 @@ Name: <The base DTB> - Info: Configures the base Raspberry Pi hardware - Load: <loaded automatically> - Params: -- audio Set to "on" to enable the onboard ALSA audio -- interface (default "off") -+ audio Set to "on" to enable the onboard ALSA audio -+ interface (default "off") - -- i2c_arm Set to "on" to enable the ARM's i2c interface -- (default "off") -+ i2c_arm Set to "on" to enable the ARM's i2c interface -+ (default "off") - -- i2c_vc Set to "on" to enable the i2c interface -- usually reserved for the VideoCore processor -- (default "off") -+ i2c_vc Set to "on" to enable the i2c interface -+ usually reserved for the VideoCore processor -+ (default "off") - -- i2c An alias for i2c_arm -+ i2c An alias for i2c_arm - -- i2c_arm_baudrate Set the baudrate of the ARM's i2c interface -- (default "100000") -+ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface -+ (default "100000") - -- i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface -- (default "100000") -+ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface -+ (default "100000") - -- i2c_baudrate An alias for i2c_arm_baudrate -+ i2c_baudrate An alias for i2c_arm_baudrate - -- i2s Set to "on" to enable the i2s interface -- (default "off") -+ i2s Set to "on" to enable the i2s interface -+ (default "off") - -- spi Set to "on" to enable the spi interfaces -- (default "off") -+ spi Set to "on" to enable the spi interfaces -+ (default "off") - -- random Set to "on" to enable the hardware random -- number generator (default "on") -+ random Set to "on" to enable the hardware random -+ number generator (default "on") - -- uart0 Set to "off" to disable uart0 (default "on") -+ uart0 Set to "off" to disable uart0 (default "on") - -- watchdog Set to "on" to enable the hardware watchdog -- (default "off") -+ watchdog Set to "on" to enable the hardware watchdog -+ (default "off") - -- act_led_trigger Choose which activity the LED tracks. -- Use "heartbeat" for a nice load indicator. -- (default "mmc") -+ act_led_trigger Choose which activity the LED tracks. -+ Use "heartbeat" for a nice load indicator. -+ (default "mmc") - -- act_led_activelow Set to "on" to invert the sense of the LED -- (default "off") -+ act_led_activelow Set to "on" to invert the sense of the LED -+ (default "off") - -- act_led_gpio Set which GPIO to use for the activity LED -- (in case you want to connect it to an external -- device) -- (default "16" on a non-Plus board, "47" on a -- Plus or Pi 2) -+ act_led_gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ (default "16" on a non-Plus board, "47" on a -+ Plus or Pi 2) - - pwr_led_trigger - pwr_led_activelow - pwr_led_gpio -- As for act_led_*, but using the PWR LED. -- Not available on Model A/B boards. -+ As for act_led_*, but using the PWR LED. -+ Not available on Model A/B boards. - - N.B. It is recommended to only enable those interfaces that are needed. - Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc -@@ -149,19 +149,19 @@ Params: - Name: ads7846 - Info: ADS7846 Touch controller - Load: dtoverlay=ads7846,<param>=<val> --Params: cs SPI bus Chip Select (default 1) -- speed SPI bus speed (default 2MHz, max 3.25MHz) -- penirq GPIO used for PENIRQ. REQUIRED -- penirq_pull Set GPIO pull (default 0=none, 2=pullup) -- swapxy Swap x and y axis -- xmin Minimum value on the X axis (default 0) -- ymin Minimum value on the Y axis (default 0) -- xmax Maximum value on the X axis (default 4095) -- ymax Maximum value on the Y axis (default 4095) -- pmin Minimum reported pressure value (default 0) -- pmax Maximum reported pressure value (default 65535) -- xohms Touchpanel sensitivity (X-plate resistance) -- (default 400) -+Params: cs SPI bus Chip Select (default 1) -+ speed SPI bus speed (default 2MHz, max 3.25MHz) -+ penirq GPIO used for PENIRQ. REQUIRED -+ penirq_pull Set GPIO pull (default 0=none, 2=pullup) -+ swapxy Swap x and y axis -+ xmin Minimum value on the X axis (default 0) -+ ymin Minimum value on the Y axis (default 0) -+ xmax Maximum value on the X axis (default 4095) -+ ymax Maximum value on the Y axis (default 4095) -+ pmin Minimum reported pressure value (default 0) -+ pmax Maximum reported pressure value (default 65535) -+ xohms Touchpanel sensitivity (X-plate resistance) -+ (default 400) - - penirq is required and usually xohms (60-100) has to be set as well. - Apart from that, pmax (255) and swapxy are also common. -@@ -175,12 +175,12 @@ Name: at86rf233 - Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, - connected to spi0.0 - Load: dtoverlay=at86rf233,<param>=<val> --Params: interrupt GPIO used for INT (default 23) -- reset GPIO used for Reset (default 24) -- sleep GPIO used for Sleep (default 25) -- speed SPI bus speed in Hz (default 6000000) -- trim Fine tuning of the internal capacitance -- arrays (0=+0pF, 15=+4.5pF, default 15) -+Params: interrupt GPIO used for INT (default 23) -+ reset GPIO used for Reset (default 24) -+ sleep GPIO used for Sleep (default 25) -+ speed SPI bus speed in Hz (default 6000000) -+ trim Fine tuning of the internal capacitance -+ arrays (0=+0pF, 15=+4.5pF, default 15) - - - Name: bmp085_i2c-sensor -@@ -194,8 +194,8 @@ Name: dht11 - Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors - Also sometimes found with the part number(s) AM230x. - Load: dtoverlay=dht11,<param>=<val> --Params: gpiopin GPIO connected to the sensor's DATA output. -- (default 4) -+Params: gpiopin GPIO connected to the sensor's DATA output. -+ (default 4) - - - Name: dwc-otg -@@ -208,15 +208,15 @@ Params: <None> - Name: dwc2 - Info: Selects the dwc2 USB controller driver - Load: dtoverlay=dwc2,<param>=<val> --Params: dr_mode Dual role mode: "host", "peripheral" or "otg" -+Params: dr_mode Dual role mode: "host", "peripheral" or "otg" - -- g-rx-fifo-size Size of rx fifo size in gadget mode -+ g-rx-fifo-size Size of rx fifo size in gadget mode - -- g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget -- mode -+ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget -+ mode - -- g-tx-fifo-size Size of periodic tx fifo per endpoint -- (except ep0) in gadget mode -+ g-tx-fifo-size Size of periodic tx fifo per endpoint -+ (except ep0) in gadget mode - - - [ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] -@@ -225,9 +225,9 @@ Params: dr_mode Dual ro - Name: enc28j60 - Info: Overlay for the Microchip ENC28J60 Ethernet Controller (SPI) - Load: dtoverlay=enc28j60,<param>=<val> --Params: int_pin GPIO used for INT (default 25) -+Params: int_pin GPIO used for INT (default 25) - -- speed SPI bus speed (default 12000000) -+ speed SPI bus speed (default 12000000) - - - Name: gpio-ir -@@ -237,26 +237,26 @@ Info: Use GPIO pin as rc-core style in - not required! The key mapping and other decoding parameters can be - configured by "ir-keytable" tool. - Load: dtoverlay=gpio-ir,<param>=<val> --Params: gpio_pin Input pin number. Default is 18. -+Params: gpio_pin Input pin number. Default is 18. - -- gpio_pull Desired pull-up/down state (off, down, up) -- Default is "down". -+ gpio_pull Desired pull-up/down state (off, down, up) -+ Default is "down". - -- rc-map-name Default rc keymap (can also be changed by -- ir-keytable), defaults to "rc-rc6-mce" -+ rc-map-name Default rc keymap (can also be changed by -+ ir-keytable), defaults to "rc-rc6-mce" - - - Name: gpio-poweroff - Info: Drives a GPIO high or low on reboot - Load: dtoverlay=gpio-poweroff,<param>=<val> --Params: gpiopin GPIO for signalling (default 26) -+Params: gpiopin GPIO for signalling (default 26) - -- active_low Set if the power control device requires a -- high->low transition to trigger a power-down. -- Note that this will require the support of a -- custom dt-blob.bin to prevent a power-down -- during the boot process, and that a reboot -- will also cause the pin to go low. -+ active_low Set if the power control device requires a -+ high->low transition to trigger a power-down. -+ Note that this will require the support of a -+ custom dt-blob.bin to prevent a power-down -+ during the boot process, and that a reboot -+ will also cause the pin to go low. - - - Name: hifiberry-amp -@@ -300,65 +300,65 @@ Name: hy28a - Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics - Default values match Texy's display shield - Load: dtoverlay=hy28a,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - -- resetgpio GPIO used to reset controller -+ resetgpio GPIO used to reset controller - -- ledgpio GPIO used to control backlight -+ ledgpio GPIO used to control backlight - - - Name: hy28b - Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics - Default values match Texy's display shield - Load: dtoverlay=hy28b,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - -- resetgpio GPIO used to reset controller -+ resetgpio GPIO used to reset controller - -- ledgpio GPIO used to control backlight -+ ledgpio GPIO used to control backlight - - - Name: i2c-gpio - Info: Adds support for software i2c controller on gpio pins - Load: dtoverlay=i2c-gpio,<param>=<val> --Params: i2c_gpio_sda GPIO used for I2C data (default "23") -+Params: i2c_gpio_sda GPIO used for I2C data (default "23") - -- i2c_gpio_scl GPIO used for I2C clock (default "24") -+ i2c_gpio_scl GPIO used for I2C clock (default "24") - -- i2c_gpio_delay_us Clock delay in microseconds -- (default "2" = ~100kHz) -+ i2c_gpio_delay_us Clock delay in microseconds -+ (default "2" = ~100kHz) - - - Name: i2c-rtc - Info: Adds support for a number of I2C Real Time Clock devices - Load: dtoverlay=i2c-rtc,<param>=<val> --Params: ds1307 Select the DS1307 device -+Params: ds1307 Select the DS1307 device - -- ds3231 Select the DS3231 device -+ ds3231 Select the DS3231 device - -- mcp7941x Select the MCP7941x device -+ mcp7941x Select the MCP7941x device - -- pcf2127 Select the PCF2127 device -+ pcf2127 Select the PCF2127 device - -- pcf8523 Select the PCF8523 device -+ pcf8523 Select the PCF8523 device - -- pcf8563 Select the PCF8563 device -+ pcf8563 Select the PCF8563 device - - - Name: i2s-mmap -@@ -396,70 +396,70 @@ Name: lirc-rpi - Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) - Consult the module documentation for more details. - Load: dtoverlay=lirc-rpi,<param>=<val> --Params: gpio_out_pin GPIO for output (default "17") -+Params: gpio_out_pin GPIO for output (default "17") - -- gpio_in_pin GPIO for input (default "18") -+ gpio_in_pin GPIO for input (default "18") - -- gpio_in_pull Pull up/down/off on the input pin -- (default "down") -+ gpio_in_pull Pull up/down/off on the input pin -+ (default "down") - -- sense Override the IR receive auto-detection logic: -- "0" = force active-high -- "1" = force active-low -- "-1" = use auto-detection -- (default "-1") -+ sense Override the IR receive auto-detection logic: -+ "0" = force active-high -+ "1" = force active-low -+ "-1" = use auto-detection -+ (default "-1") - -- softcarrier Turn the software carrier "on" or "off" -- (default "on") -+ softcarrier Turn the software carrier "on" or "off" -+ (default "on") - -- invert "on" = invert the output pin (default "off") -+ invert "on" = invert the output pin (default "off") - -- debug "on" = enable additional debug messages -- (default "off") -+ debug "on" = enable additional debug messages -+ (default "off") - - - Name: mcp2515-can0 - Info: Configures the MCP2515 CAN controller on spi0.0 - Load: dtoverlay=mcp2515-can0,<param>=<val> --Params: oscillator Clock frequency for the CAN controller (Hz) -+Params: oscillator Clock frequency for the CAN controller (Hz) - -- spimaxfrequency Maximum SPI frequence (Hz) -+ spimaxfrequency Maximum SPI frequence (Hz) - -- interrupt GPIO for interrupt signal -+ interrupt GPIO for interrupt signal - - - Name: mcp2515-can1 - Info: Configures the MCP2515 CAN controller on spi0.1 - Load: dtoverlay=mcp2515-can1,<param>=<val> --Params: oscillator Clock frequency for the CAN controller (Hz) -+Params: oscillator Clock frequency for the CAN controller (Hz) - -- spimaxfrequency Maximum SPI frequence (Hz) -+ spimaxfrequency Maximum SPI frequence (Hz) - -- interrupt GPIO for interrupt signal -+ interrupt GPIO for interrupt signal - - - Name: mmc - Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock - Load: dtoverlay=mmc,<param>=<val> --Params: overclock_50 Clock (in MHz) to use when the MMC framework -- requests 50MHz -- force_pio Disable DMA support -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ force_pio Disable DMA support - - - Name: mz61581 - Info: MZ61581 display by Tontec - Load: dtoverlay=mz61581,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- txbuflen Transmit buffer length (default 32768) -+ txbuflen Transmit buffer length (default 32768) - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - - - [ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] -@@ -474,69 +474,69 @@ Params: speed Display - Name: piscreen - Info: PiScreen display by OzzMaker.com - Load: dtoverlay=piscreen,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - - - Name: piscreen2r - Info: PiScreen 2 with resistive TP display by OzzMaker.com - Load: dtoverlay=piscreen2r,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - - - Name: pitft28-capacitive - Info: Adafruit PiTFT 2.8" capacitive touch screen - Load: dtoverlay=pitft28-capacitive,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- touch-sizex Touchscreen size x (default 240) -+ touch-sizex Touchscreen size x (default 240) - -- touch-sizey Touchscreen size y (default 320) -+ touch-sizey Touchscreen size y (default 320) - -- touch-invx Touchscreen inverted x axis -+ touch-invx Touchscreen inverted x axis - -- touch-invy Touchscreen inverted y axis -+ touch-invy Touchscreen inverted y axis - -- touch-swapxy Touchscreen swapped x y axis -+ touch-swapxy Touchscreen swapped x y axis - - - Name: pitft28-resistive - Info: Adafruit PiTFT 2.8" resistive touch screen - Load: dtoverlay=pitft28-resistive,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - - - Name: pps-gpio - Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). - Load: dtoverlay=pps-gpio,<param>=<val> --Params: gpiopin Input GPIO (default "18") -+Params: gpiopin Input GPIO (default "18") - - - Name: pwm -@@ -553,9 +553,9 @@ Info: Configures a single PWM channel - 4) Currently the clock must have been enabled and configured - by other means. - Load: dtoverlay=pwm,<param>=<val> --Params: pin Output pin (default 18) - see table -- func Pin function (default 2 = Alt5) - see above -- clock PWM clock frequency (informational) -+Params: pin Output pin (default 18) - see table -+ func Pin function (default 2 = Alt5) - see above -+ clock PWM clock frequency (informational) - - - Name: pwm-2chan -@@ -572,11 +572,11 @@ Info: Configures both PWM channels - 4) Currently the clock must have been enabled and configured - by other means. - Load: dtoverlay=pwm-2chan,<param>=<val> --Params: pin Output pin (default 18) - see table -- pin2 Output pin for other channel (default 19) -- func Pin function (default 2 = Alt5) - see above -- func2 Function for pin2 (default 2 = Alt5) -- clock PWM clock frequency (informational) -+Params: pin Output pin (default 18) - see table -+ pin2 Output pin for other channel (default 19) -+ func Pin function (default 2 = Alt5) - see above -+ func2 Function for pin2 (default 2 = Alt5) -+ clock PWM clock frequency (informational) - - - Name: raspidac3 -@@ -600,15 +600,15 @@ Params: <None> - Name: rpi-display - Info: RPi-Display - 2.8" Touch Display by Watterott - Load: dtoverlay=rpi-display,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- xohms Touchpanel sensitivity (X-plate resistance) -+ xohms Touchpanel sensitivity (X-plate resistance) - - - Name: rpi-ft5406 -@@ -632,52 +632,52 @@ Params: <None> - Name: sdhost - Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock - Load: dtoverlay=sdhost,<param>=<val> --Params: overclock_50 Clock (in MHz) to use when the MMC framework -- requests 50MHz -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz - -- force_pio Disable DMA support (default off) -+ force_pio Disable DMA support (default off) - -- pio_limit Number of blocks above which to use DMA -- (default 1) -+ pio_limit Number of blocks above which to use DMA -+ (default 1) - -- debug Enable debug output (default off) -+ debug Enable debug output (default off) - - - Name: sdio - Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, - and enables SDIO via GPIOs 22-27. - Load: dtoverlay=sdio,<param>=<val> --Params: overclock_50 SD Clock (in MHz) to use when the MMC framework -- requests 50MHz -+Params: overclock_50 SD Clock (in MHz) to use when the MMC framework -+ requests 50MHz - -- sdio_overclock SDIO Clock (in MHz) to use when the MMC -- framework requests 50MHz -+ sdio_overclock SDIO Clock (in MHz) to use when the MMC -+ framework requests 50MHz - -- force_pio Disable DMA support (default off) -+ force_pio Disable DMA support (default off) - -- pio_limit Number of blocks above which to use DMA -- (default 1) -+ pio_limit Number of blocks above which to use DMA -+ (default 1) - -- debug Enable debug output (default off) -+ debug Enable debug output (default off) - -- poll_once Disable SDIO-device polling every second -- (default on: polling once at boot-time) -+ poll_once Disable SDIO-device polling every second -+ (default on: polling once at boot-time) - -- bus_width Set the SDIO host bus width (default 4 bits) -+ bus_width Set the SDIO host bus width (default 4 bits) - - - Name: sdtweak - Info: Tunes the bcm2835-sdhost SD/MMC driver - Load: dtoverlay=sdtweak,<param>=<val> --Params: overclock_50 Clock (in MHz) to use when the MMC framework -- requests 50MHz -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz - -- force_pio Disable DMA support (default off) -+ force_pio Disable DMA support (default off) - -- pio_limit Number of blocks above which to use DMA -- (default 1) -+ pio_limit Number of blocks above which to use DMA -+ (default 1) - -- debug Enable debug output (default off) -+ debug Enable debug output (default off) - - - Name: smi -@@ -708,25 +708,25 @@ Name: tinylcd35 - Info: 3.5" Color TFT Display by www.tinylcd.com - Options: Touch, RTC, keypad - Load: dtoverlay=tinylcd35,<param>=<val> --Params: speed Display SPI bus speed -+Params: speed Display SPI bus speed - -- rotate Display rotation {0,90,180,270} -+ rotate Display rotation {0,90,180,270} - -- fps Delay between frame updates -+ fps Delay between frame updates - -- debug Debug output level {0-7} -+ debug Debug output level {0-7} - -- touch Enable touch panel -+ touch Enable touch panel - -- touchgpio Touch controller IRQ GPIO -+ touchgpio Touch controller IRQ GPIO - -- xohms Touchpanel: Resistance of X-plate in ohms -+ xohms Touchpanel: Resistance of X-plate in ohms - -- rtc-pcf PCF8563 Real Time Clock -+ rtc-pcf PCF8563 Real Time Clock - -- rtc-ds DS1307 Real Time Clock -+ rtc-ds DS1307 Real Time Clock - -- keypad Enable keypad -+ keypad Enable keypad - - Examples: - Display with touchpanel, PCF8563 RTC and keypad: -@@ -738,9 +738,9 @@ Params: speed Display - Name: uart1 - Info: Enable uart1 in place of uart0 - Load: dtoverlay=uart1,<param>=<val> --Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) -+Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) - -- rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) -+ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) - - - Name: vc4-kms-v3d -@@ -763,22 +763,22 @@ Name: w1-gpio - Info: Configures the w1-gpio Onewire interface module. - Use this overlay if you *don't* need a GPIO to drive an external pullup. - Load: dtoverlay=w1-gpio,<param>=<val> --Params: gpiopin GPIO for I/O (default "4") -+Params: gpiopin GPIO for I/O (default "4") - -- pullup Non-zero, "on", or "y" to enable the parasitic -- power (2-wire, power-on-data) feature -+ pullup Non-zero, "on", or "y" to enable the parasitic -+ power (2-wire, power-on-data) feature - - - Name: w1-gpio-pullup - Info: Configures the w1-gpio Onewire interface module. - Use this overlay if you *do* need a GPIO to drive an external pullup. - Load: dtoverlay=w1-gpio-pullup,<param>=<val> --Params: gpiopin GPIO for I/O (default "4") -+Params: gpiopin GPIO for I/O (default "4") - -- pullup Non-zero, "on", or "y" to enable the parasitic -- power (2-wire, power-on-data) feature -+ pullup Non-zero, "on", or "y" to enable the parasitic -+ power (2-wire, power-on-data) feature - -- extpullup GPIO for external pullup (default "5") -+ extpullup GPIO for external pullup (default "5") - - - Troubleshooting |