aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch
diff options
context:
space:
mode:
authorÁlvaro Fernández Rojas <noltari@gmail.com>2017-02-07 22:30:59 +0100
committerÁlvaro Fernández Rojas <noltari@gmail.com>2017-02-07 23:00:21 +0100
commitd9d090e52082635a24aeaefdc6bfe61ab97f38bb (patch)
tree6e725a11b5c44ee1a7ce95a0b2bcba4cae1e6f5c /target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch
parentada91d8a245690b3bc8d2a62b391d2725aea5c8e (diff)
downloadupstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.tar.gz
upstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.tar.bz2
upstream-d9d090e52082635a24aeaefdc6bfe61ab97f38bb.zip
brcm2708: remove linux 4.4 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch4564
1 files changed, 0 insertions, 4564 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch
deleted file mode 100644
index 996833b54b..0000000000
--- a/target/linux/brcm2708/patches-4.4/0051-BCM2708-Add-core-Device-Tree-support.patch
+++ /dev/null
@@ -1,4564 +0,0 @@
-From 136ea0d26db2d172ce9ab36da7f75f97dde6abde Mon Sep 17 00:00:00 2001
-From: notro <notro@tronnes.org>
-Date: Wed, 9 Jul 2014 14:46:08 +0200
-Subject: [PATCH] BCM2708: Add core Device Tree support
-
-Add the bare minimum needed to boot BCM2708 from a Device Tree.
-
-Signed-off-by: Noralf Tronnes <notro@tronnes.org>
-
-BCM2708: DT: change 'axi' nodename to 'soc'
-
-Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835.
-The VC4 bootloader fills in certain properties in the 'axi' subtree,
-but since this is part of an upstreaming effort, the name is changed.
-
-Signed-off-by: Noralf Tronnes notro@tronnes.org
-
-BCM2708_DT: Correct length of the peripheral space
-
-Use dts-dirs feature for overlays.
-
-The kernel makefiles have a dts-dirs target that is for vendor subdirectories.
-
-Using this fixes the install_dtbs target, which previously did not install the overlays.
-
-BCM270X_DT: configure I2S DMA channels
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-
-BCM270X_DT: switch to bcm2835-i2s
-
-I2S soundcard drivers with proper devicetree support (i.e. not linking
-to the cpu_dai/platform via name but to cpu/platform via of_node)
-will work out of the box without any modifications.
-
-When the kernel is compiled without devicetree support the platform
-code will instantiate the bcm2708-i2s driver and I2S soundcard drivers
-will link to it via name, as before.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-
-SDIO-overlay: add poll_once-boolean parameter
-
-Add paramter to toggle sdio-device-polling
-done every second or once at boot-time.
-
-Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
-
-BCM270X_DT: Make mmc overlay compatible with current firmware
-
-The original DT overlay logic followed a merge-then-patch procedure,
-i.e. parameters are applied to the loaded overlay before the overlay
-is merged into the base DTB. This sequence has been changed to
-patch-then-merge, in order to support parameterised node names, and
-to protect against bad overlays. As a result, overrides (parameters)
-must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB.
-
-mmc-overlay.dts (that switches back to the original mmc sdcard
-driver) is the only overlay violating that rule, and this patch
-fixes it.
-
-bcm270x_dt: Use the sdhost MMC controller by default
-
-The "mmc" overlay reverts to using the other controller.
-
-squash: Add cprman to dt
-
-BCM270X_DT: Use clk_core for I2C interfaces
----
- arch/arm/boot/dts/Makefile | 30 +
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 145 +++++
- arch/arm/boot/dts/bcm2708-rpi-b.dts | 135 +++++
- arch/arm/boot/dts/bcm2708-rpi-cm.dts | 102 ++++
- arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 40 ++
- arch/arm/boot/dts/bcm2708.dtsi | 40 ++
- arch/arm/boot/dts/bcm2708_common.dtsi | 347 +++++++++++
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 145 +++++
- arch/arm/boot/dts/bcm2709.dtsi | 102 ++++
- arch/arm/boot/dts/bcm2835-rpi-cm.dts | 93 +++
- arch/arm/boot/dts/bcm2835-rpi-cm.dtsi | 30 +
- arch/arm/boot/dts/overlays/Makefile | 69 +++
- arch/arm/boot/dts/overlays/README | 648 +++++++++++++++++++++
- arch/arm/boot/dts/overlays/ads7846-overlay.dts | 83 +++
- .../dts/overlays/bmp085_i2c-sensor-overlay.dts | 23 +
- arch/arm/boot/dts/overlays/dht11-overlay.dts | 39 ++
- arch/arm/boot/dts/overlays/enc28j60-overlay.dts | 50 ++
- .../boot/dts/overlays/gpio-poweroff-overlay.dts | 34 ++
- .../boot/dts/overlays/hifiberry-amp-overlay.dts | 39 ++
- .../boot/dts/overlays/hifiberry-dac-overlay.dts | 34 ++
- .../dts/overlays/hifiberry-dacplus-overlay.dts | 39 ++
- .../boot/dts/overlays/hifiberry-digi-overlay.dts | 39 ++
- arch/arm/boot/dts/overlays/hy28a-overlay.dts | 87 +++
- arch/arm/boot/dts/overlays/hy28b-overlay.dts | 142 +++++
- arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 55 ++
- arch/arm/boot/dts/overlays/i2s-mmap-overlay.dts | 13 +
- arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 39 ++
- .../boot/dts/overlays/iqaudio-dacplus-overlay.dts | 39 ++
- arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts | 57 ++
- .../arm/boot/dts/overlays/mcp2515-can0-overlay.dts | 69 +++
- .../arm/boot/dts/overlays/mcp2515-can1-overlay.dts | 69 +++
- arch/arm/boot/dts/overlays/mmc-overlay.dts | 39 ++
- arch/arm/boot/dts/overlays/mz61581-overlay.dts | 111 ++++
- arch/arm/boot/dts/overlays/piscreen-overlay.dts | 96 +++
- .../dts/overlays/pitft28-resistive-overlay.dts | 115 ++++
- arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 34 ++
- arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 46 ++
- arch/arm/boot/dts/overlays/pwm-overlay.dts | 42 ++
- arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 45 ++
- arch/arm/boot/dts/overlays/rpi-dac-overlay.dts | 34 ++
- arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 82 +++
- arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts | 17 +
- arch/arm/boot/dts/overlays/rpi-proto-overlay.dts | 39 ++
- arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 47 ++
- arch/arm/boot/dts/overlays/sdhost-overlay.dts | 29 +
- arch/arm/boot/dts/overlays/sdio-overlay.dts | 32 +
- arch/arm/boot/dts/overlays/smi-dev-overlay.dts | 18 +
- arch/arm/boot/dts/overlays/smi-nand-overlay.dts | 69 +++
- arch/arm/boot/dts/overlays/smi-overlay.dts | 37 ++
- .../boot/dts/overlays/spi-gpio35-39-overlay.dts | 31 +
- arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 216 +++++++
- arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 ++
- arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 +
- arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 39 ++
- .../boot/dts/overlays/w1-gpio-pullup-overlay.dts | 41 ++
- 55 files changed, 4203 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
- create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts
- create mode 100755 arch/arm/boot/dts/bcm2708-rpi-cm.dts
- create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
- create mode 100644 arch/arm/boot/dts/bcm2708.dtsi
- create mode 100644 arch/arm/boot/dts/bcm2708_common.dtsi
- create mode 100644 arch/arm/boot/dts/bcm2709-rpi-2-b.dts
- create mode 100644 arch/arm/boot/dts/bcm2709.dtsi
- create mode 100644 arch/arm/boot/dts/bcm2835-rpi-cm.dts
- create mode 100644 arch/arm/boot/dts/bcm2835-rpi-cm.dtsi
- create mode 100644 arch/arm/boot/dts/overlays/Makefile
- create mode 100644 arch/arm/boot/dts/overlays/README
- create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/i2s-mmap-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
- create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/rpi-dac-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/rpi-display-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/rpi-proto-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1,5 +1,25 @@
- ifeq ($(CONFIG_OF),y)
-
-+dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-b.dtb
-+dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-b-plus.dtb
-+dtb-$(CONFIG_ARCH_BCM2708) += bcm2708-rpi-cm.dtb
-+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-cm.dtb
-+dtb-$(CONFIG_ARCH_BCM2709) += bcm2709-rpi-2-b.dtb
-+
-+# Raspberry Pi
-+ifeq ($(CONFIG_ARCH_BCM2708),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_ARCH_BCM2709),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_ARCH_BCM2835),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(RPI_DT_OVERLAYS),y)
-+ dts-dirs += overlays
-+endif
-+
- dtb-$(CONFIG_ARCH_ALPINE) += \
- alpine-db.dtb
- dtb-$(CONFIG_MACH_ASM9260) += \
-@@ -777,10 +797,20 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
- mt8127-moose.dtb \
- mt8135-evbp1.dtb
- dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-+
-+targets += dtbs dtbs_install
-+targets += $(dtb-y)
-+
- endif
-
- dtstree := $(srctree)/$(src)
- dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
- always := $(dtb-y)
-+subdir-y := $(dts-dirs)
- clean-files := *.dtb
-+
-+# Enable fixups to support overlays on BCM2708 platforms
-+ifeq ($(RPI_DT_OVERLAYS),y)
-+ DTC_FLAGS ?= -@
-+endif
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -0,0 +1,145 @@
-+/dts-v1/;
-+
-+#include "bcm2708.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+ model = "Raspberry Pi Model B+";
-+};
-+
-+&gpio {
-+ sdhost_pins: sdhost_pins {
-+ brcm,pins = <48 49 50 51 52 53>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_cs_pins: spi0_cs_pins {
-+ brcm,pins = <8 7>;
-+ brcm,function = <1>; /* output */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <18 19 20 21>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+};
-+
-+&sdhost {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdhost_pins>;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&fb {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+ spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+
-+ spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&random {
-+ status = "okay";
-+};
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "input";
-+ gpios = <&gpio 35 0>;
-+ };
-+};
-+
-+/ {
-+ __overrides__ {
-+ uart0 = <&uart0>,"status";
-+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+ i2s = <&i2s>,"status";
-+ spi = <&spi0>,"status";
-+ i2c0 = <&i2c0>,"status";
-+ i2c1 = <&i2c1>,"status";
-+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+ core_freq = <&clk_core>,"clock-frequency:0";
-+
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+ audio = <&audio>,"status";
-+ watchdog = <&watchdog>,"status";
-+ random = <&random>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -0,0 +1,135 @@
-+/dts-v1/;
-+
-+#include "bcm2708.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+ model = "Raspberry Pi Model B";
-+};
-+
-+&gpio {
-+ sdhost_pins: sdhost_pins {
-+ brcm,pins = <48 49 50 51 52 53>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_cs_pins: spi0_cs_pins {
-+ brcm,pins = <8 7>;
-+ brcm,function = <1>; /* output */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <28 29 30 31>;
-+ brcm,function = <6>; /* alt2 */
-+ };
-+};
-+
-+&sdhost {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdhost_pins>;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&fb {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+ spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+
-+ spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&random {
-+ status = "okay";
-+};
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 16 1>;
-+ };
-+};
-+
-+/ {
-+ __overrides__ {
-+ uart0 = <&uart0>,"status";
-+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+ i2s = <&i2s>,"status";
-+ spi = <&spi0>,"status";
-+ i2c0 = <&i2c0>,"status";
-+ i2c1 = <&i2c1>,"status";
-+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+ core_freq = <&clk_core>,"clock-frequency:0";
-+
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ audio = <&audio>,"status";
-+ watchdog = <&watchdog>,"status";
-+ random = <&random>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-@@ -0,0 +1,102 @@
-+/dts-v1/;
-+
-+#include "bcm2708-rpi-cm.dtsi"
-+
-+/ {
-+ model = "Raspberry Pi Compute Module";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&gpio {
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_cs_pins: spi0_cs_pins {
-+ brcm,pins = <8 7>;
-+ brcm,function = <1>; /* output */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <18 19 20 21>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+ spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+
-+ spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&random {
-+ status = "okay";
-+};
-+
-+/ {
-+ __overrides__ {
-+ uart0 = <&uart0>,"status";
-+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+ i2s = <&i2s>,"status";
-+ spi = <&spi0>,"status";
-+ i2c0 = <&i2c0>,"status";
-+ i2c1 = <&i2c1>,"status";
-+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+ core_freq = <&clk_core>,"clock-frequency:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
-@@ -0,0 +1,40 @@
-+#include "bcm2708.dtsi"
-+
-+&gpio {
-+ sdhost_pins: sdhost_pins {
-+ brcm,pins = <48 49 50 51 52 53>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+};
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+};
-+
-+&sdhost {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdhost_pins>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&fb {
-+ status = "okay";
-+};
-+
-+/ {
-+ __overrides__ {
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ audio = <&audio>,"status";
-+ watchdog = <&watchdog>,"status";
-+ random = <&random>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708.dtsi
-@@ -0,0 +1,40 @@
-+#include "bcm2708_common.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+ model = "BCM2708";
-+
-+ chosen {
-+ /* No padding required - the boot loader can do that. */
-+ bootargs = "";
-+ };
-+
-+ soc {
-+ ranges = <0x7e000000 0x20000000 0x01000000>;
-+
-+ timer@7e003000 {
-+ compatible = "brcm,bcm2835-system-timer";
-+ reg = <0x7e003000 0x1000>;
-+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-+ clock-frequency = <1000000>;
-+ };
-+
-+ arm-pmu {
-+ compatible = "arm,arm1176-pmu";
-+ };
-+
-+ gpiomem {
-+ compatible = "brcm,bcm2835-gpiomem";
-+ reg = <0x7e200000 0x1000>;
-+ status = "okay";
-+ };
-+ };
-+};
-+
-+&intc {
-+ compatible = "brcm,bcm2835-armctrl-ic";
-+};
-+
-+&watchdog {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -0,0 +1,347 @@
-+#include "skeleton.dtsi"
-+
-+/ {
-+ interrupt-parent = <&intc>;
-+
-+ aliases {
-+ audio = &audio;
-+ sound = &sound;
-+ soc = &soc;
-+ dma = &dma;
-+ intc = &intc;
-+ watchdog = &watchdog;
-+ random = &random;
-+ mailbox = &mailbox;
-+ gpio = &gpio;
-+ uart0 = &uart0;
-+ sdhost = &sdhost;
-+ i2s = &i2s;
-+ spi0 = &spi0;
-+ i2c0 = &i2c0;
-+ uart1 = &uart1;
-+ mmc = &mmc;
-+ i2c1 = &i2c1;
-+ i2c2 = &i2c2;
-+ usb = &usb;
-+ leds = &leds;
-+ fb = &fb;
-+ vchiq = &vchiq;
-+ thermal = &thermal;
-+ clocks = &clocks;
-+ };
-+
-+ /* Onboard audio */
-+ audio: audio {
-+ compatible = "brcm,bcm2835-audio";
-+ brcm,pwm-channels = <8>;
-+ status = "disabled";
-+ };
-+
-+ /* External sound card */
-+ sound: sound {
-+ };
-+
-+ soc: soc {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ dma: dma@7e007000 {
-+ compatible = "brcm,bcm2835-dma";
-+ reg = <0x7e007000 0xf00>;
-+ interrupts = <1 16>,
-+ <1 17>,
-+ <1 18>,
-+ <1 19>,
-+ <1 20>,
-+ <1 21>,
-+ <1 22>,
-+ <1 23>,
-+ <1 24>,
-+ <1 25>,
-+ <1 26>,
-+ <1 27>;
-+
-+ #dma-cells = <1>;
-+ brcm,dma-channel-mask = <0x0f35>;
-+ };
-+
-+ intc: interrupt-controller@7e00b200 {
-+ compatible = "brcm,bcm2708-armctrl-ic";
-+ reg = <0x7e00b200 0x200>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ mailbox: mailbox@7e00b800 {
-+ compatible = "brcm,bcm2835-mbox";
-+ reg = <0x7e00b880 0x40>;
-+ interrupts = <0 1>;
-+ #mbox-cells = <0>;
-+ };
-+
-+ watchdog: watchdog@7e100000 {
-+ compatible = "brcm,bcm2835-pm-wdt";
-+ reg = <0x7e100000 0x28>;
-+ status = "disabled";
-+ };
-+
-+ cprman: cprman@7e101000 {
-+ compatible = "brcm,bcm2835-cprman";
-+ #clock-cells = <1>;
-+ reg = <0x7e101000 0x2000>;
-+
-+ /* CPRMAN derives everything from the platform's
-+ * oscillator.
-+ */
-+ clocks = <&clk_osc>;
-+ status = "disabled";
-+ };
-+
-+ random: rng@7e104000 {
-+ compatible = "brcm,bcm2835-rng";
-+ reg = <0x7e104000 0x10>;
-+ status = "disabled";
-+ };
-+
-+ gpio: gpio@7e200000 {
-+ compatible = "brcm,bcm2835-gpio";
-+ reg = <0x7e200000 0xb4>;
-+ interrupts = <2 17>, <2 18>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ uart0: uart@7e201000 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x7e201000 0x1000>;
-+ interrupts = <2 25>;
-+ clocks = <&clk_uart0 &clk_apb_p>;
-+ clock-names = "uartclk","apb_pclk";
-+ arm,primecell-periphid = <0x00241011>; // For an explanation, see
-+ // https://github.com/raspberrypi/linux/commit/13731d862cf5219216533a3b0de052cee4cc5038
-+ status = "disabled";
-+ };
-+
-+ sdhost: sdhost@7e202000 {
-+ compatible = "brcm,bcm2835-sdhost";
-+ reg = <0x7e202000 0x100>;
-+ interrupts = <2 24>;
-+ clocks = <&clk_core>;
-+ dmas = <&dma 13>,
-+ <&dma 13>;
-+ dma-names = "tx", "rx";
-+ brcm,pio-limit = <1>;
-+ status = "disabled";
-+ };
-+
-+ i2s: i2s@7e203000 {
-+ compatible = "brcm,bcm2835-i2s";
-+ reg = <0x7e203000 0x24>,
-+ <0x7e101098 0x08>;
-+
-+ dmas = <&dma 2>, <&dma 3>;
-+ dma-names = "tx", "rx";
-+ status = "disabled";
-+ };
-+
-+ spi0: spi@7e204000 {
-+ compatible = "brcm,bcm2835-spi";
-+ reg = <0x7e204000 0x1000>;
-+ interrupts = <2 22>;
-+ clocks = <&clk_core>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ /* the dma channels */
-+ dmas = <&dma 6>, <&dma 7>;
-+ dma-names = "tx", "rx";
-+ /* the chipselects used - <0> means native GPIO
-+ * add more gpios if necessary as <&gpio 6 1>
-+ * (but do not forget to make them output!)
-+ */
-+ cs-gpios = <0>, <0>;
-+ };
-+
-+ i2c0: i2c@7e205000 {
-+ compatible = "brcm,bcm2708-i2c";
-+ reg = <0x7e205000 0x1000>;
-+ interrupts = <2 21>;
-+ clocks = <&clk_core>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ pwm: pwm@7e20c000 {
-+ compatible = "brcm,bcm2835-pwm";
-+ reg = <0x7e20c000 0x28>;
-+ clocks = <&clk_pwm>;
-+ #pwm-cells = <2>;
-+ status = "disabled";
-+ };
-+
-+ uart1: uart@7e215040 {
-+ compatible = "brcm,bcm2835-aux-uart", "ns16550";
-+ reg = <0x7e215040 0x40>;
-+ interrupts = <1 29>;
-+ clocks = <&clk_uart1>;
-+ reg-shift = <2>;
-+ no-loopback-test;
-+ status = "disabled";
-+ };
-+
-+ mmc: mmc@7e300000 {
-+ compatible = "brcm,bcm2835-mmc";
-+ reg = <0x7e300000 0x100>;
-+ interrupts = <2 30>;
-+ clocks = <&clk_mmc>;
-+ dmas = <&dma 11>,
-+ <&dma 11>;
-+ dma-names = "tx", "rx";
-+ status = "disabled";
-+ };
-+
-+ i2c1: i2c@7e804000 {
-+ compatible = "brcm,bcm2708-i2c";
-+ reg = <0x7e804000 0x1000>;
-+ interrupts = <2 21>;
-+ clocks = <&clk_core>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c2: i2c@7e805000 {
-+ // Beware - this is shared with the HDMI module.
-+ // Careless use may break (really) your display.
-+ // Caveat emptor.
-+ compatible = "brcm,bcm2708-i2c";
-+ reg = <0x7e805000 0x1000>;
-+ interrupts = <2 21>;
-+ clocks = <&clk_core>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ smi: smi@7e600000 {
-+ compatible = "brcm,bcm2835-smi";
-+ reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
-+ interrupts = <2 16>;
-+ brcm,smi-clock-source = <6>;
-+ brcm,smi-clock-divisor = <4>;
-+ dmas = <&dma 4>;
-+ dma-names = "rx-tx";
-+ status = "disabled";
-+ };
-+
-+ usb: usb@7e980000 {
-+ compatible = "brcm,bcm2708-usb";
-+ reg = <0x7e980000 0x10000>,
-+ <0x7e006000 0x1000>;
-+ interrupts = <2 0>,
-+ <1 9>;
-+ };
-+
-+ firmware: firmware {
-+ compatible = "raspberrypi,bcm2835-firmware";
-+ mboxes = <&mailbox>;
-+ };
-+
-+ leds: leds {
-+ compatible = "gpio-leds";
-+ };
-+
-+ fb: fb {
-+ compatible = "brcm,bcm2708-fb";
-+ firmware = <&firmware>;
-+ status = "disabled";
-+ };
-+
-+ vchiq: vchiq {
-+ compatible = "brcm,bcm2835-vchiq";
-+ reg = <0x7e00b840 0xf>;
-+ interrupts = <0 2>;
-+ cache-line-size = <32>;
-+ firmware = <&firmware>;
-+ };
-+
-+ thermal: thermal {
-+ compatible = "brcm,bcm2835-thermal";
-+ firmware = <&firmware>;
-+ };
-+ };
-+
-+ clocks: clocks {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ clk_core: clock@0 {
-+ compatible = "fixed-clock";
-+ reg = <0>;
-+ #clock-cells = <0>;
-+ clock-output-names = "core";
-+ clock-frequency = <250000000>;
-+ };
-+
-+ clk_mmc: clock@1 {
-+ compatible = "fixed-clock";
-+ reg = <1>;
-+ #clock-cells = <0>;
-+ clock-output-names = "mmc";
-+ clock-frequency = <250000000>;
-+ };
-+
-+ clk_uart0: clock@2 {
-+ compatible = "fixed-clock";
-+ reg = <2>;
-+ #clock-cells = <0>;
-+ clock-output-names = "uart0_pclk";
-+ clock-frequency = <3000000>;
-+ };
-+
-+ clk_apb_p: clock@3 {
-+ compatible = "fixed-clock";
-+ reg = <3>;
-+ #clock-cells = <0>;
-+ clock-output-names = "apb_pclk";
-+ clock-frequency = <126000000>;
-+ };
-+
-+ clk_pwm: clock@4 {
-+ compatible = "fixed-clock";
-+ reg = <4>;
-+ #clock-cells = <0>;
-+ clock-output-names = "pwm";
-+ clock-frequency = <100000000>;
-+ };
-+
-+ clk_uart1: clock@5 {
-+ compatible = "fixed-factor-clock";
-+ reg = <5>;
-+ clocks = <&clk_core>;
-+ #clock-cells = <0>;
-+ clock-div = <1>;
-+ clock-mult = <2>;
-+ };
-+
-+ /* The oscillator is the root of the clock tree. */
-+ clk_osc: clock@6 {
-+ compatible = "fixed-clock";
-+ reg = <6>;
-+ #clock-cells = <0>;
-+ clock-output-names = "osc";
-+ clock-frequency = <19200000>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ cache_line_size = <&vchiq>, "cache-line-size:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -0,0 +1,145 @@
-+/dts-v1/;
-+
-+#include "bcm2709.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm2709";
-+ model = "Raspberry Pi 2 Model B";
-+};
-+
-+&gpio {
-+ sdhost_pins: sdhost_pins {
-+ brcm,pins = <48 49 50 51 52 53>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ spi0_cs_pins: spi0_cs_pins {
-+ brcm,pins = <8 7>;
-+ brcm,function = <1>; /* output */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <18 19 20 21>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+};
-+
-+&sdhost {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdhost_pins>;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&fb {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+ spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+
-+ spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&random {
-+ status = "okay";
-+};
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "input";
-+ gpios = <&gpio 35 0>;
-+ };
-+};
-+
-+/ {
-+ __overrides__ {
-+ uart0 = <&uart0>,"status";
-+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+ i2s = <&i2s>,"status";
-+ spi = <&spi0>,"status";
-+ i2c0 = <&i2c0>,"status";
-+ i2c1 = <&i2c1>,"status";
-+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+ core_freq = <&clk_core>,"clock-frequency:0";
-+
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
-+ audio = <&audio>,"status";
-+ watchdog = <&watchdog>,"status";
-+ random = <&random>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2709.dtsi
-@@ -0,0 +1,102 @@
-+#include "bcm2708_common.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm2709";
-+ model = "BCM2709";
-+
-+ chosen {
-+ /* No padding required - the boot loader can do that. */
-+ bootargs = "";
-+ };
-+
-+ soc {
-+ ranges = <0x7e000000 0x3f000000 0x01000000>,
-+ <0x40000000 0x40000000 0x00040000>;
-+
-+ local_intc: local_intc {
-+ compatible = "brcm,bcm2836-l1-intc";
-+ reg = <0x40000000 0x100>;
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ interrupt-parent = <&local_intc>;
-+ };
-+
-+ arm-pmu {
-+ compatible = "arm,cortex-a7-pmu";
-+ interrupt-parent = <&local_intc>;
-+ interrupts = <9>;
-+ };
-+
-+ gpiomem {
-+ compatible = "brcm,bcm2835-gpiomem";
-+ reg = <0x7e200000 0x1000>;
-+ status = "okay";
-+ };
-+
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ clock-frequency = <19200000>;
-+ interrupt-parent = <&local_intc>;
-+ interrupts = <0>, // PHYS_SECURE_PPI
-+ <1>, // PHYS_NONSECURE_PPI
-+ <3>, // VIRT_PPI
-+ <2>; // HYP_PPI
-+ always-on;
-+ };
-+
-+ syscon@40000000 {
-+ compatible = "brcm,bcm2836-arm-local", "syscon";
-+ reg = <0x40000000 0x100>;
-+ };
-+ };
-+
-+ cpus: cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ v7_cpu0: cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0xf00>;
-+ clock-frequency = <800000000>;
-+ };
-+
-+ v7_cpu1: cpu@1 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0xf01>;
-+ clock-frequency = <800000000>;
-+ };
-+
-+ v7_cpu2: cpu@2 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0xf02>;
-+ clock-frequency = <800000000>;
-+ };
-+
-+ v7_cpu3: cpu@3 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0xf03>;
-+ clock-frequency = <800000000>;
-+ };
-+ };
-+
-+ __overrides__ {
-+ arm_freq = <&v7_cpu0>, "clock-frequency:0",
-+ <&v7_cpu1>, "clock-frequency:0",
-+ <&v7_cpu2>, "clock-frequency:0",
-+ <&v7_cpu3>, "clock-frequency:0";
-+ };
-+};
-+
-+&watchdog {
-+ status = "okay";
-+};
-+
-+&intc {
-+ compatible = "brcm,bcm2836-armctrl-ic";
-+ interrupt-parent = <&local_intc>;
-+ interrupts = <8>;
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2835-rpi-cm.dts
-@@ -0,0 +1,93 @@
-+/dts-v1/;
-+
-+#include "bcm2835-rpi-cm.dtsi"
-+
-+/ {
-+ model = "Raspberry Pi Compute Module";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&gpio {
-+ spi0_pins: spi0_pins {
-+ brcm,pins = <7 8 9 10 11>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+
-+ i2c0_pins: i2c0 {
-+ brcm,pins = <0 1>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2c1_pins: i2c1 {
-+ brcm,pins = <2 3>;
-+ brcm,function = <4>;
-+ };
-+
-+ i2s_pins: i2s {
-+ brcm,pins = <18 19 20 21>;
-+ brcm,function = <4>; /* alt0 */
-+ };
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins>;
-+
-+ spidev@0{
-+ compatible = "spidev";
-+ reg = <0>; /* CE0 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+
-+ spidev@1{
-+ compatible = "spidev";
-+ reg = <1>; /* CE1 */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi-max-frequency = <500000>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins>;
-+ clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_pins>;
-+};
-+
-+/ {
-+ __overrides__ {
-+ uart0 = <&uart0>,"status";
-+ uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
-+ uart1_clkrate = <&uart1>,"clock-frequency:0";
-+ i2s = <&i2s>,"status";
-+ spi = <&spi0>,"status";
-+ i2c0 = <&i2c0>,"status";
-+ i2c1 = <&i2c1>,"status";
-+ i2c2_iknowwhatimdoing = <&i2c2>,"status";
-+ i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+ i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+ i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-+ core_freq = <&clk_core>,"clock-frequency:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2835-rpi-cm.dtsi
-@@ -0,0 +1,30 @@
-+#include "bcm2835.dtsi"
-+
-+&leds {
-+ act_led: act {
-+ label = "led0";
-+ linux,default-trigger = "mmc0";
-+ gpios = <&gpio 47 0>;
-+ };
-+};
-+
-+&mmc {
-+ status = "okay";
-+ bus-width = <4>;
-+};
-+
-+&fb {
-+ status = "okay";
-+};
-+
-+/ {
-+ __overrides__ {
-+ act_led_gpio = <&act_led>,"gpios:4";
-+ act_led_activelow = <&act_led>,"gpios:8";
-+ act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+ audio = <&audio>,"status";
-+ watchdog = <&watchdog>,"status";
-+ random = <&random>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -0,0 +1,69 @@
-+ifeq ($(CONFIG_OF),y)
-+
-+# Overlays for the Raspberry Pi platform
-+
-+ifeq ($(CONFIG_ARCH_BCM2708),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_ARCH_BCM2709),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+ifeq ($(CONFIG_ARCH_BCM2835),y)
-+ RPI_DT_OVERLAYS=y
-+endif
-+
-+dtb-$(RPI_DT_OVERLAYS) += ads7846-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += gpio-poweroff-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hifiberry-amp-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hifiberry-dac-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hifiberry-dacplus-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hifiberry-digi-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hy28a-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += hy28b-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += i2c-rtc-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += i2s-mmap-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += iqaudio-dac-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += iqaudio-dacplus-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += lirc-rpi-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += mcp2515-can0-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += pwm-2chan-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += raspidac3-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += rpi-display-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += rpi-ft5406-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += rpi-proto-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += rpi-sense-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += sdhost-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += sdio-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += spi-gpio35-39-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += vga666-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += w1-gpio-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += w1-gpio-pullup-overlay.dtb
-+
-+targets += dtbs dtbs_install
-+targets += $(dtb-y)
-+
-+endif
-+
-+always := $(dtb-y)
-+clean-files := *.dtb
-+
-+# Enable fixups to support overlays on BCM2708 platforms
-+ifeq ($(RPI_DT_OVERLAYS),y)
-+ DTC_FLAGS ?= -@
-+endif
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -0,0 +1,648 @@
-+Introduction
-+============
-+
-+This directory contains Device Tree overlays. Device Tree makes it possible
-+to support many hardware configurations with a single kernel and without the
-+need to explicitly load or blacklist kernel modules. Note that this isn't a
-+"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices
-+are still configured by the board support code, but the intention is to
-+eventually reach that goal.
-+
-+On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By
-+default, the Raspberry Pi kernel boots with device tree enabled. You can
-+completely disable DT usage (for now) by adding:
-+
-+ device_tree=
-+
-+to your config.txt, which should cause your Pi to revert to the old way of
-+doing things after a reboot.
-+
-+In /boot you will find a .dtb for each base platform. This describes the
-+hardware that is part of the Raspberry Pi board. The loader (start.elf and its
-+siblings) selects the .dtb file appropriate for the platform by name, and reads
-+it into memory. At this point, all of the optional interfaces (i2c, i2s, spi)
-+are disabled, but they can be enabled using Device Tree parameters:
-+
-+ dtparam=i2c=on,i2s=on,spi=on
-+
-+However, this shouldn't be necessary in many use cases because loading an
-+overlay that requires one of those interfaces will cause it to be enabled
-+automatically, and it is advisable to only enable interfaces if they are
-+needed.
-+
-+Configuring additional, optional hardware is done using Device Tree overlays
-+(see below).
-+
-+raspi-config
-+============
-+
-+The Advanced Options section of the raspi-config utility can enable and disable
-+Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it
-+is possible to both enable an interface and blacklist the driver, if for some
-+reason you should want to defer the loading.
-+
-+Modules
-+=======
-+
-+As well as describing the hardware, Device Tree also gives enough information
-+to allow suitable driver modules to be located and loaded, with the corollary
-+that unneeded modules are not loaded. As a result it should be possible to
-+remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can
-+have its contents deleted (or commented out).
-+
-+Using Overlays
-+==============
-+
-+Overlays are loaded using the "dtoverlay" directive. As an example, consider the
-+popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
-+pre-DT world this would be loaded from /etc/modules, with an explicit
-+"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled,
-+this becomes a line in config.txt:
-+
-+ dtoverlay=lirc-rpi
-+
-+This causes the file /boot/overlays/lirc-rpi-overlay.dtb to be loaded. By
-+default it will use GPIOs 17 (out) and 18 (in), but this can be modified using
-+DT parameters:
-+
-+ dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13
-+
-+Parameters always have default values, although in some cases (e.g. "w1-gpio")
-+it is necessary to provided multiple overlays in order to get the desired
-+behaviour. See the list of overlays below for a description of the parameters and their defaults.
-+
-+The Overlay and Parameter Reference
-+===================================
-+
-+N.B. When editing this file, please preserve the indentation levels to make it simple to parse
-+programmatically. NO HARD TABS.
-+
-+
-+Name: <The base DTB>
-+Info: Configures the base Raspberry Pi hardware
-+Load: <loaded automatically>
-+Params:
-+ audio Set to "on" to enable the onboard ALSA audio
-+ interface (default "off")
-+
-+ i2c_arm Set to "on" to enable the ARM's i2c interface
-+ (default "off")
-+
-+ i2c_vc Set to "on" to enable the i2c interface
-+ usually reserved for the VideoCore processor
-+ (default "off")
-+
-+ i2c An alias for i2c_arm
-+
-+ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface
-+ (default "100000")
-+
-+ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface
-+ (default "100000")
-+
-+ i2c_baudrate An alias for i2c_arm_baudrate
-+
-+ i2s Set to "on" to enable the i2s interface
-+ (default "off")
-+
-+ spi Set to "on" to enable the spi interfaces
-+ (default "off")
-+
-+ random Set to "on" to enable the hardware random
-+ number generator (default "on")
-+
-+ uart0 Set to "off" to disable uart0 (default "on")
-+
-+ watchdog Set to "on" to enable the hardware watchdog
-+ (default "off")
-+
-+ act_led_trigger Choose which activity the LED tracks.
-+ Use "heartbeat" for a nice load indicator.
-+ (default "mmc")
-+
-+ act_led_activelow Set to "on" to invert the sense of the LED
-+ (default "off")
-+
-+ act_led_gpio Set which GPIO to use for the activity LED
-+ (in case you want to connect it to an external
-+ device)
-+ (default "16" on a non-Plus board, "47" on a
-+ Plus or Pi 2)
-+
-+ pwr_led_trigger
-+ pwr_led_activelow
-+ pwr_led_gpio
-+ As for act_led_*, but using the PWR LED.
-+ Not available on Model A/B boards.
-+
-+ N.B. It is recommended to only enable those interfaces that are needed.
-+ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc
-+ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.)
-+ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical
-+ interfaces i2c0 and i2c1. Use of the numeric variants is still possible
-+ but deprecated because the ARM/VC assignments differ between board
-+ revisions. The same board-specific mapping applies to i2c_baudrate,
-+ and the other i2c baudrate parameters.
-+
-+
-+Name: ads7846
-+Info: ADS7846 Touch controller
-+Load: dtoverlay=ads7846,<param>=<val>
-+Params: cs SPI bus Chip Select (default 1)
-+ speed SPI bus speed (default 2Mhz, max 3.25MHz)
-+ penirq GPIO used for PENIRQ. REQUIRED
-+ penirq_pull Set GPIO pull (default 0=none, 2=pullup)
-+ swapxy Swap x and y axis
-+ xmin Minimum value on the X axis (default 0)
-+ ymin Minimum value on the Y axis (default 0)
-+ xmax Maximum value on the X axis (default 4095)
-+ ymax Maximum value on the Y axis (default 4095)
-+ pmin Minimum reported pressure value (default 0)
-+ pmax Maximum reported pressure value (default 65535)
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+ (default 400)
-+
-+ penirq is required and usually xohms (60-100) has to be set as well.
-+ Apart from that, pmax (255) and swapxy are also common.
-+ The rest of the calibration can be done with xinput-calibrator.
-+ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian
-+ Device Tree binding document:
-+ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt
-+
-+
-+Name: bmp085_i2c-sensor
-+Info: Configures the BMP085/BMP180 digital barometric pressure and temperature
-+ sensors from Bosch Sensortec
-+Load: dtoverlay=bmp085_i2c-sensor
-+Params: <None>
-+
-+
-+Name: dht11
-+Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors
-+ Also sometimes found with the part number(s) AM230x.
-+Load: dtoverlay=dht11,<param>=<val>
-+Params: gpiopin GPIO connected to the sensor's DATA output.
-+ (default 4)
-+
-+
-+[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ]
-+
-+
-+Name: enc28j60
-+Info: Overlay for the Microchip ENC28J60 Ethernet Controller (SPI)
-+Load: dtoverlay=enc28j60,<param>=<val>
-+Params: int_pin GPIO used for INT (default 25)
-+
-+ speed SPI bus speed (default 12000000)
-+
-+
-+Name: gpio-poweroff
-+Info: Drives a GPIO high or low on reboot
-+Load: dtoverlay=gpio-poweroff,<param>=<val>
-+Params: gpiopin GPIO for signalling (default 26)
-+
-+ active_low Set if the power control device requires a
-+ high->low transition to trigger a power-down.
-+ Note that this will require the support of a
-+ custom dt-blob.bin to prevent a power-down
-+ during the boot process, and that a reboot
-+ will also cause the pin to go low.
-+
-+
-+Name: hifiberry-amp
-+Info: Configures the HifiBerry Amp and Amp+ audio cards
-+Load: dtoverlay=hifiberry-amp
-+Params: <None>
-+
-+
-+Name: hifiberry-dac
-+Info: Configures the HifiBerry DAC audio card
-+Load: dtoverlay=hifiberry-dac
-+Params: <None>
-+
-+
-+Name: hifiberry-dacplus
-+Info: Configures the HifiBerry DAC+ audio card
-+Load: dtoverlay=hifiberry-dacplus
-+Params: <None>
-+
-+
-+Name: hifiberry-digi
-+Info: Configures the HifiBerry Digi audio card
-+Load: dtoverlay=hifiberry-digi
-+Params: <None>
-+
-+
-+Name: hy28a
-+Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics
-+ Default values match Texy's display shield
-+Load: dtoverlay=hy28a,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+
-+ resetgpio GPIO used to reset controller
-+
-+ ledgpio GPIO used to control backlight
-+
-+
-+Name: hy28b
-+Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics
-+ Default values match Texy's display shield
-+Load: dtoverlay=hy28b,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+
-+ resetgpio GPIO used to reset controller
-+
-+ ledgpio GPIO used to control backlight
-+
-+
-+Name: i2c-rtc
-+Info: Adds support for a number of I2C Real Time Clock devices
-+Load: dtoverlay=i2c-rtc,<param>
-+Params: ds1307 Select the DS1307 device
-+
-+ ds3231 Select the DS3231 device
-+
-+ mcp7941x Select the MCP7941x device
-+
-+ pcf2127 Select the PCF2127 device
-+
-+ pcf8523 Select the PCF8523 device
-+
-+ pcf8563 Select the PCF8563 device
-+
-+
-+Name: i2s-mmap
-+Info: Enables mmap support in the bcm2708-i2s driver
-+Load: dtoverlay=i2s-mmap
-+Params: <None>
-+
-+
-+Name: iqaudio-dac
-+Info: Configures the IQaudio DAC audio card
-+Load: dtoverlay=iqaudio-dac
-+Params: <None>
-+
-+
-+Name: iqaudio-dacplus
-+Info: Configures the IQaudio DAC+ audio card
-+Load: dtoverlay=iqaudio-dacplus
-+Params: <None>
-+
-+
-+Name: lirc-rpi
-+Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi)
-+ Consult the module documentation for more details.
-+Load: dtoverlay=lirc-rpi,<param>=<val>,...
-+Params: gpio_out_pin GPIO for output (default "17")
-+
-+ gpio_in_pin GPIO for input (default "18")
-+
-+ gpio_in_pull Pull up/down/off on the input pin
-+ (default "down")
-+
-+ sense Override the IR receive auto-detection logic:
-+ "0" = force active-high
-+ "1" = force active-low
-+ "-1" = use auto-detection
-+ (default "-1")
-+
-+ softcarrier Turn the software carrier "on" or "off"
-+ (default "on")
-+
-+ invert "on" = invert the output pin (default "off")
-+
-+ debug "on" = enable additional debug messages
-+ (default "off")
-+
-+
-+Name: mcp2515-can0
-+Info: Configures the MCP2515 CAN controller on spi0.0
-+Load: dtoverlay=mcp2515-can0,<param>=<val>
-+Params: oscillator Clock frequency for the CAN controller (Hz)
-+
-+ spimaxfrequency Maximum SPI frequence (Hz)
-+
-+ interrupt GPIO for interrupt signal
-+
-+
-+Name: mcp2515-can1
-+Info: Configures the MCP2515 CAN controller on spi0.1
-+Load: dtoverlay=mcp2515-can1,<param>=<val>
-+Params: oscillator Clock frequency for the CAN controller (Hz)
-+
-+ spimaxfrequency Maximum SPI frequence (Hz)
-+
-+ interrupt GPIO for interrupt signal
-+
-+
-+Name: mmc
-+Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock
-+Load: dtoverlay=mmc,<param>=<val>
-+Params: overclock_50 Clock (in MHz) to use when the MMC framework
-+ requests 50MHz
-+ force_pio Disable DMA support
-+
-+
-+Name: mz61581
-+Info: MZ61581 display by Tontec
-+Load: dtoverlay=mz61581,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ txbuflen Transmit buffer length (default 32768)
-+
-+ debug Debug output level {0-7}
-+
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+
-+
-+[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ]
-+
-+
-+[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ]
-+
-+
-+[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ]
-+
-+
-+Name: piscreen
-+Info: PiScreen display by OzzMaker.com
-+Load: dtoverlay=piscreen,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+
-+
-+Name: pitft28-resistive
-+Info: Adafruit PiTFT 2.8" resistive touch screen
-+Load: dtoverlay=pitft28-resistive,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+
-+Name: pps-gpio
-+Info: Configures the pps-gpio (pulse-per-second time signal via GPIO).
-+Load: dtoverlay=pps-gpio,<param>=<val>
-+Params: gpiopin Input GPIO (default "18")
-+
-+
-+Name: pwm
-+Info: Configures a single PWM channel
-+ Legal pin,function combinations for each channel:
-+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
-+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
-+ N.B.:
-+ 1) Pin 18 is the only one available on all platforms, and
-+ it is the one used by the I2S audio interface.
-+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-+ 2) The onboard analogue audio output uses both PWM channels.
-+ 3) So be careful mixing audio and PWM.
-+ 4) Currently the clock must have been enabled and configured
-+ by other means.
-+Load: dtoverlay=pwm,<param>=<val>
-+Params: pin Output pin (default 18) - see table
-+ func Pin function (default 2 = Alt5) - see above
-+ clock PWM clock frequency (informational)
-+
-+
-+Name: pwm-2chan
-+Info: Configures both PWM channels
-+ Legal pin,function combinations for each channel:
-+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
-+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
-+ N.B.:
-+ 1) Pin 18 is the only one available on all platforms, and
-+ it is the one used by the I2S audio interface.
-+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-+ 2) The onboard analogue audio output uses both PWM channels.
-+ 3) So be careful mixing audio and PWM.
-+ 4) Currently the clock must have been enabled and configured
-+ by other means.
-+Load: dtoverlay=pwm-2chan,<param>=<val>
-+Params: pin Output pin (default 18) - see table
-+ pin2 Output pin for other channel (default 19)
-+ func Pin function (default 2 = Alt5) - see above
-+ func2 Function for pin2 (default 2 = Alt5)
-+ clock PWM clock frequency (informational)
-+
-+
-+Name: raspidac3
-+Info: Configures the RaspiDAV Rev.3x audio card
-+Load: dtoverlay=raspidac3
-+Params: <None>
-+
-+
-+Name: rpi-dac
-+Info: Configures the RPi DAC audio card
-+Load: dtoverlay=rpi-dac
-+Params: <None>
-+
-+
-+Name: rpi-display
-+Info: RPi-Display - 2.8" Touch Display by Watterott
-+Load: dtoverlay=rpi-display,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+ xohms Touchpanel sensitivity (X-plate resistance)
-+
-+
-+Name: rpi-ft5406
-+Info: Official Raspberry Pi display touchscreen
-+Load: dtoverlay=rpi-ft5406
-+Params: <None>
-+
-+
-+Name: rpi-proto
-+Info: Configures the RPi Proto audio card
-+Load: dtoverlay=rpi-proto
-+Params: <None>
-+
-+
-+Name: rpi-sense
-+Info: Raspberry Pi Sense HAT
-+Load: dtoverlay=rpi-sense
-+Params: <None>
-+
-+
-+Name: sdhost
-+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock
-+Load: dtoverlay=sdhost,<param>=<val>
-+Params: overclock_50 Clock (in MHz) to use when the MMC framework
-+ requests 50MHz
-+
-+ force_pio Disable DMA support (default off)
-+
-+ pio_limit Number of blocks above which to use DMA
-+ (default 1)
-+
-+ debug Enable debug output (default off)
-+
-+
-+Name: sdio
-+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
-+ and enables SDIO via GPIOs 22-27.
-+Load: dtoverlay=sdio,<param>=<val>
-+Params: overclock_50 Clock (in MHz) to use when the MMC framework
-+ requests 50MHz
-+
-+ force_pio Disable DMA support (default off)
-+
-+ pio_limit Number of blocks above which to use DMA
-+ (default 1)
-+
-+ debug Enable debug output (default off)
-+
-+ poll_once Disable SDIO-device polling every second
-+ (default on: polling once at boot-time)
-+
-+
-+Name: smi
-+Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
-+Load: dtoverlay=smi
-+Params: <None>
-+
-+
-+Name: smi-dev
-+Info: Enables the userspace interface for the SMI driver
-+Load: dtoverlay=smi-dev
-+Params: <None>
-+
-+
-+Name: smi-nand
-+Info: Enables access to NAND flash via the SMI interface
-+Load: dtoverlay=smi-nand
-+Params: <None>
-+
-+
-+Name: spi-gpio35-39
-+Info: move SPI function block to GPIO 35 to 39
-+Load: dtoverlay=spi-gpio35-39
-+Params: <None>
-+
-+
-+Name: tinylcd35
-+Info: 3.5" Color TFT Display by www.tinylcd.com
-+ Options: Touch, RTC, keypad
-+Load: dtoverlay=tinylcd35,<param>=<val>
-+Params: speed Display SPI bus speed
-+
-+ rotate Display rotation {0,90,180,270}
-+
-+ fps Delay between frame updates
-+
-+ debug Debug output level {0-7}
-+
-+ touch Enable touch panel
-+
-+ touchgpio Touch controller IRQ GPIO
-+
-+ xohms Touchpanel: Resistance of X-plate in ohms
-+
-+ rtc-pcf PCF8563 Real Time Clock
-+
-+ rtc-ds DS1307 Real Time Clock
-+
-+ keypad Enable keypad
-+
-+ Examples:
-+ Display with touchpanel, PCF8563 RTC and keypad:
-+ dtoverlay=tinylcd35,touch,rtc-pcf,keypad
-+ Old touch display:
-+ dtoverlay=tinylcd35,touch,touchgpio=3
-+
-+
-+Name: uart1
-+Info: Enable uart1 in place of uart0
-+Load: dtoverlay=uart1,<param>=<val>
-+Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14)
-+
-+ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
-+
-+
-+Name: vga666
-+Info: Overlay for the Fen Logic VGA666 board
-+ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
-+ after the kernel has started.
-+Load: dtoverlay=vga666
-+Params: <None>
-+
-+
-+Name: w1-gpio
-+Info: Configures the w1-gpio Onewire interface module.
-+ Use this overlay if you *don't* need a GPIO to drive an external pullup.
-+Load: dtoverlay=w1-gpio,<param>=<val>
-+Params: gpiopin GPIO for I/O (default "4")
-+
-+ pullup Non-zero, "on", or "y" to enable the parasitic
-+ power (2-wire, power-on-data) feature
-+
-+
-+Name: w1-gpio-pullup
-+Info: Configures the w1-gpio Onewire interface module.
-+ Use this overlay if you *do* need a GPIO to drive an external pullup.
-+Load: dtoverlay=w1-gpio-pullup,<param>=<val>
-+Params: gpiopin GPIO for I/O (default "4")
-+
-+ pullup Non-zero, "on", or "y" to enable the parasitic
-+ power (2-wire, power-on-data) feature
-+
-+ extpullup GPIO for external pullup (default "5")
-+
-+
-+Troubleshooting
-+===============
-+
-+If you are experiencing problems that you think are DT-related, enable DT
-+diagnostic output by adding this to /boot/config.txt:
-+
-+ dtdebug=on
-+
-+and rebooting. Then run:
-+
-+ sudo vcdbg log msg
-+
-+and look for relevant messages.
-+
-+Further reading
-+===============
-+
-+This is only meant to be a quick introduction to the subject of Device Tree on
-+Raspberry Pi. There is a more complete explanation here:
-+
-+http://www.raspberrypi.org/documentation/configuration/device-tree.md
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts
-@@ -0,0 +1,83 @@
-+/*
-+ * Generic Device Tree overlay for the ADS7846 touch controller
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ ads7846_pins: ads7846_pins {
-+ brcm,pins = <255>; /* illegal default value */
-+ brcm,function = <0>; /* in */
-+ brcm,pull = <0>; /* none */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ads7846: ads7846@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ads7846_pins>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <255 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 255 0>;
-+
-+ /* driver defaults */
-+ ti,x-min = /bits/ 16 <0>;
-+ ti,y-min = /bits/ 16 <0>;
-+ ti,x-max = /bits/ 16 <0x0FFF>;
-+ ti,y-max = /bits/ 16 <0x0FFF>;
-+ ti,pressure-min = /bits/ 16 <0>;
-+ ti,pressure-max = /bits/ 16 <0xFFFF>;
-+ ti,x-plate-ohms = /bits/ 16 <400>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ cs = <&ads7846>,"reg:0";
-+ speed = <&ads7846>,"spi-max-frequency:0";
-+ penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */
-+ <&ads7846>,"interrupts:0",
-+ <&ads7846>,"pendown-gpio:4";
-+ penirq_pull = <&ads7846_pins>,"brcm,pull:0";
-+ swapxy = <&ads7846>,"ti,swap-xy?";
-+ xmin = <&ads7846>,"ti,x-min;0";
-+ ymin = <&ads7846>,"ti,y-min;0";
-+ xmax = <&ads7846>,"ti,x-max;0";
-+ ymax = <&ads7846>,"ti,y-max;0";
-+ pmin = <&ads7846>,"ti,pressure-min;0";
-+ pmax = <&ads7846>,"ti,pressure-max;0";
-+ xohms = <&ads7846>,"ti,x-plate-ohms;0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts
-@@ -0,0 +1,23 @@
-+// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&i2c_arm>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ bmp085@77 {
-+ compatible = "bosch,bmp085";
-+ reg = <0x77>;
-+ default-oversampling = <3>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts
-@@ -0,0 +1,39 @@
-+/*
-+ * Overlay for the DHT11/21/22 humidity/temperature sensor modules.
-+ */
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+
-+ dht11: dht11@0 {
-+ compatible = "dht11";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&dht11_pins>;
-+ gpios = <&gpio 4 0>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ dht11_pins: dht11_pins {
-+ brcm,pins = <4>;
-+ brcm,function = <0>; // in
-+ brcm,pull = <0>; // off
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&dht11_pins>,"brcm,pins:0",
-+ <&dht11>,"gpios:4";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts
-@@ -0,0 +1,50 @@
-+// Overlay for the Microchip ENC28J60 Ethernet Controller
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ eth1: enc28j60@0{
-+ compatible = "microchip,enc28j60";
-+ reg = <0>; /* CE0 */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&eth1_pins>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <25 0x2>; /* falling edge */
-+ spi-max-frequency = <12000000>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ eth1_pins: eth1_pins {
-+ brcm,pins = <25>;
-+ brcm,function = <0>; /* in */
-+ brcm,pull = <0>; /* none */
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ int_pin = <&eth1>, "interrupts:0",
-+ <&eth1_pins>, "brcm,pins:0";
-+ speed = <&eth1>, "spi-max-frequency:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
-@@ -0,0 +1,34 @@
-+// Definitions for gpio-poweroff module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+ power_ctrl: power_ctrl {
-+ compatible = "gpio-poweroff";
-+ gpios = <&gpio 26 0>;
-+ force;
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ power_ctrl_pins: power_ctrl_pins {
-+ brcm,pins = <26>;
-+ brcm,function = <1>; // out
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&power_ctrl>,"gpios:4",
-+ <&power_ctrl_pins>,"brcm,pins:0";
-+ active_low = <&power_ctrl>,"gpios:8";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry Amp/Amp+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "hifiberry,hifiberry-amp";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ tas5713@1b {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,tas5713";
-+ reg = <0x1b>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts
-@@ -0,0 +1,34 @@
-+// Definitions for HiFiBerry DAC
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "hifiberry,hifiberry-dac";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target-path = "/";
-+ __overlay__ {
-+ pcm5102a-codec {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm5102a";
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry DAC+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "hifiberry,hifiberry-dacplus";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ pcm5122@4d {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm5122";
-+ reg = <0x4d>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry Digi
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "hifiberry,hifiberry-digi";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ wm8804@3b {
-+ #sound-dai-cells = <0>;
-+ compatible = "wlf,wm8804";
-+ reg = <0x3b>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * Device Tree overlay for HY28A display
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ hy28a_pins: hy28a_pins {
-+ brcm,pins = <17 25 18>;
-+ brcm,function = <0 1 1>; /* in out out */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hy28a: hy28a@0{
-+ compatible = "ilitek,ili9320";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&hy28a_pins>;
-+
-+ spi-max-frequency = <32000000>;
-+ spi-cpol;
-+ spi-cpha;
-+ rotate = <270>;
-+ bgr;
-+ fps = <50>;
-+ buswidth = <8>;
-+ startbyte = <0x70>;
-+ reset-gpios = <&gpio 25 0>;
-+ led-gpios = <&gpio 18 1>;
-+ debug = <0>;
-+ };
-+
-+ hy28a_ts: hy28a-ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <17 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 17 0>;
-+ ti,x-plate-ohms = /bits/ 16 <100>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ speed = <&hy28a>,"spi-max-frequency:0";
-+ rotate = <&hy28a>,"rotate:0";
-+ fps = <&hy28a>,"fps:0";
-+ debug = <&hy28a>,"debug:0";
-+ xohms = <&hy28a_ts>,"ti,x-plate-ohms;0";
-+ resetgpio = <&hy28a>,"reset-gpios:4",
-+ <&hy28a_pins>, "brcm,pins:1";
-+ ledgpio = <&hy28a>,"led-gpios:4",
-+ <&hy28a_pins>, "brcm,pins:2";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts
-@@ -0,0 +1,142 @@
-+/*
-+ * Device Tree overlay for HY28b display shield by Texy
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ hy28b_pins: hy28b_pins {
-+ brcm,pins = <17 25 18>;
-+ brcm,function = <0 1 1>; /* in out out */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hy28b: hy28b@0{
-+ compatible = "ilitek,ili9325";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&hy28b_pins>;
-+
-+ spi-max-frequency = <48000000>;
-+ spi-cpol;
-+ spi-cpha;
-+ rotate = <270>;
-+ bgr;
-+ fps = <50>;
-+ buswidth = <8>;
-+ startbyte = <0x70>;
-+ reset-gpios = <&gpio 25 0>;
-+ led-gpios = <&gpio 18 1>;
-+
-+ gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7";
-+
-+ init = <0x10000e7 0x0010
-+ 0x1000000 0x0001
-+ 0x1000001 0x0100
-+ 0x1000002 0x0700
-+ 0x1000003 0x1030
-+ 0x1000004 0x0000
-+ 0x1000008 0x0207
-+ 0x1000009 0x0000
-+ 0x100000a 0x0000
-+ 0x100000c 0x0001
-+ 0x100000d 0x0000
-+ 0x100000f 0x0000
-+ 0x1000010 0x0000
-+ 0x1000011 0x0007
-+ 0x1000012 0x0000
-+ 0x1000013 0x0000
-+ 0x2000032
-+ 0x1000010 0x1590
-+ 0x1000011 0x0227
-+ 0x2000032
-+ 0x1000012 0x009c
-+ 0x2000032
-+ 0x1000013 0x1900
-+ 0x1000029 0x0023
-+ 0x100002b 0x000e
-+ 0x2000032
-+ 0x1000020 0x0000
-+ 0x1000021 0x0000
-+ 0x2000032
-+ 0x1000050 0x0000
-+ 0x1000051 0x00ef
-+ 0x1000052 0x0000
-+ 0x1000053 0x013f
-+ 0x1000060 0xa700
-+ 0x1000061 0x0001
-+ 0x100006a 0x0000
-+ 0x1000080 0x0000
-+ 0x1000081 0x0000
-+ 0x1000082 0x0000
-+ 0x1000083 0x0000
-+ 0x1000084 0x0000
-+ 0x1000085 0x0000
-+ 0x1000090 0x0010
-+ 0x1000092 0x0000
-+ 0x1000093 0x0003
-+ 0x1000095 0x0110
-+ 0x1000097 0x0000
-+ 0x1000098 0x0000
-+ 0x1000007 0x0133
-+ 0x1000020 0x0000
-+ 0x1000021 0x0000
-+ 0x2000064>;
-+ debug = <0>;
-+ };
-+
-+ hy28b_ts: hy28b-ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <17 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 17 0>;
-+ ti,x-plate-ohms = /bits/ 16 <100>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ speed = <&hy28b>,"spi-max-frequency:0";
-+ rotate = <&hy28b>,"rotate:0";
-+ fps = <&hy28b>,"fps:0";
-+ debug = <&hy28b>,"debug:0";
-+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0";
-+ resetgpio = <&hy28b>,"reset-gpios:4",
-+ <&hy28b_pins>, "brcm,pins:1";
-+ ledgpio = <&hy28b>,"led-gpios:4",
-+ <&hy28b_pins>, "brcm,pins:2";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
-@@ -0,0 +1,55 @@
-+// Definitions for several I2C based Real Time Clocks
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&i2c_arm>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ ds1307: ds1307@68 {
-+ compatible = "maxim,ds1307";
-+ reg = <0x68>;
-+ status = "disable";
-+ };
-+ mcp7941x: mcp7941x@6f {
-+ compatible = "microchip,mcp7941x";
-+ reg = <0x6f>;
-+ status = "disable";
-+ };
-+ ds3231: ds3231@68 {
-+ compatible = "maxim,ds3231";
-+ reg = <0x68>;
-+ status = "disable";
-+ };
-+ pcf2127: pcf2127@51 {
-+ compatible = "nxp,pcf2127";
-+ reg = <0x51>;
-+ status = "disable";
-+ };
-+ pcf8523: pcf8523@68 {
-+ compatible = "nxp,pcf8523";
-+ reg = <0x68>;
-+ status = "disable";
-+ };
-+ pcf8563: pcf8563@51 {
-+ compatible = "nxp,pcf8563";
-+ reg = <0x51>;
-+ status = "disable";
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ ds1307 = <&ds1307>,"status";
-+ ds3231 = <&ds3231>,"status";
-+ mcp7941x = <&mcp7941x>,"status";
-+ pcf2127 = <&pcf2127>,"status";
-+ pcf8523 = <&pcf8523>,"status";
-+ pcf8563 = <&pcf8563>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/i2s-mmap-overlay.dts
-@@ -0,0 +1,13 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ brcm,enable-mmap;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for IQaudIO DAC
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "iqaudio,iqaudio-dac";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ pcm5122@4c {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm5122";
-+ reg = <0x4c>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for IQaudIO DAC+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "iqaudio,iqaudio-dac";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ pcm5122@4c {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm5122";
-+ reg = <0x4c>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
-@@ -0,0 +1,57 @@
-+// Definitions for lirc-rpi module
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+ lirc_rpi: lirc_rpi {
-+ compatible = "rpi,lirc-rpi";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lirc_pins>;
-+ status = "okay";
-+
-+ // Override autodetection of IR receiver circuit
-+ // (0 = active high, 1 = active low, -1 = no override )
-+ rpi,sense = <0xffffffff>;
-+
-+ // Software carrier
-+ // (0 = off, 1 = on)
-+ rpi,softcarrier = <1>;
-+
-+ // Invert output
-+ // (0 = off, 1 = on)
-+ rpi,invert = <0>;
-+
-+ // Enable debugging messages
-+ // (0 = off, 1 = on)
-+ rpi,debug = <0>;
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ lirc_pins: lirc_pins {
-+ brcm,pins = <17 18>;
-+ brcm,function = <1 0>; // out in
-+ brcm,pull = <0 1>; // off down
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0";
-+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4";
-+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4";
-+
-+ sense = <&lirc_rpi>,"rpi,sense:0";
-+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0";
-+ invert = <&lirc_rpi>,"rpi,invert:0";
-+ debug = <&lirc_rpi>,"rpi,debug:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Device tree overlay for mcp251x/can0 on spi0.0
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
-+ /* disable spi-dev for spi0.0 */
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+ spidev@0{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ /* the interrupt pin of the can-controller */
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ can0_pins: can0_pins {
-+ brcm,pins = <25>;
-+ brcm,function = <0>; /* input */
-+ };
-+ };
-+ };
-+
-+ /* the clock/oscillator of the can-controller */
-+ fragment@2 {
-+ target-path = "/clocks";
-+ __overlay__ {
-+ /* external oscillator of mcp2515 on SPI0.0 */
-+ can0_osc: can0_osc {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <16000000>;
-+ };
-+ };
-+ };
-+
-+ /* the spi config of the can-controller itself binding everything together */
-+ fragment@3 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ can0: mcp2515@0 {
-+ reg = <0>;
-+ compatible = "microchip,mcp2515";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&can0_pins>;
-+ spi-max-frequency = <10000000>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <25 0x2>;
-+ clocks = <&can0_osc>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ oscillator = <&can0_osc>,"clock-frequency:0";
-+ spimaxfrequency = <&can0>,"spi-max-frequency:0";
-+ interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
-+ /* disable spi-dev for spi0.1 */
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ /* the interrupt pin of the can-controller */
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ can1_pins: can1_pins {
-+ brcm,pins = <25>;
-+ brcm,function = <0>; /* input */
-+ };
-+ };
-+ };
-+
-+ /* the clock/oscillator of the can-controller */
-+ fragment@2 {
-+ target-path = "/clocks";
-+ __overlay__ {
-+ /* external oscillator of mcp2515 on spi0.1 */
-+ can1_osc: can1_osc {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <16000000>;
-+ };
-+ };
-+ };
-+
-+ /* the spi config of the can-controller itself binding everything together */
-+ fragment@3 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ can1: mcp2515@1 {
-+ reg = <1>;
-+ compatible = "microchip,mcp2515";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&can1_pins>;
-+ spi-max-frequency = <10000000>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <25 0x2>;
-+ clocks = <&can1_osc>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ oscillator = <&can1_osc>,"clock-frequency:0";
-+ spimaxfrequency = <&can1>,"spi-max-frequency:0";
-+ interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts
-@@ -0,0 +1,39 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&mmc>;
-+ frag0: __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc_pins>;
-+ bus-width = <4>;
-+ brcm,overclock-50 = <0>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ mmc_pins: mmc_pins {
-+ brcm,pins = <48 49 50 51 52 53>;
-+ brcm,function = <7>; /* alt3 */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&sdhost>;
-+ __overlay__ {
-+ status = "disabled";
-+ };
-+ };
-+
-+ __overrides__ {
-+ overclock_50 = <&frag0>,"brcm,overclock-50:0";
-+ force_pio = <&frag0>,"brcm,force-pio?";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ mz61581_pins: mz61581_pins {
-+ brcm,pins = <4 15 18 25>;
-+ brcm,function = <0 1 1 1>; /* in out out out */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mz61581: mz61581@0{
-+ compatible = "samsung,s6d02a1";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mz61581_pins>;
-+
-+ spi-max-frequency = <128000000>;
-+ spi-cpol;
-+ spi-cpha;
-+
-+ width = <320>;
-+ height = <480>;
-+ rotate = <270>;
-+ bgr;
-+ fps = <30>;
-+ buswidth = <8>;
-+ txbuflen = <32768>;
-+
-+ reset-gpios = <&gpio 15 0>;
-+ dc-gpios = <&gpio 25 0>;
-+ led-gpios = <&gpio 18 0>;
-+
-+ init = <0x10000b0 00
-+ 0x1000011
-+ 0x20000ff
-+ 0x10000b3 0x02 0x00 0x00 0x00
-+ 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43
-+ 0x10000c1 0x08 0x16 0x08 0x08
-+ 0x10000c4 0x11 0x07 0x03 0x03
-+ 0x10000c6 0x00
-+ 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00
-+ 0x1000035 0x00
-+ 0x1000036 0xa0
-+ 0x100003a 0x55
-+ 0x1000044 0x00 0x01
-+ 0x10000d0 0x07 0x07 0x1d 0x03
-+ 0x10000d1 0x03 0x30 0x10
-+ 0x10000d2 0x03 0x14 0x04
-+ 0x1000029
-+ 0x100002c>;
-+
-+ /* This is a workaround to make sure the init sequence slows down and doesn't fail */
-+ debug = <3>;
-+ };
-+
-+ mz61581_ts: mz61581_ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <4 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 4 0>;
-+
-+ ti,x-plate-ohms = /bits/ 16 <60>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ speed = <&mz61581>, "spi-max-frequency:0";
-+ rotate = <&mz61581>, "rotate:0";
-+ fps = <&mz61581>, "fps:0";
-+ txbuflen = <&mz61581>, "txbuflen:0";
-+ debug = <&mz61581>, "debug:0";
-+ xohms = <&mz61581_ts>,"ti,x-plate-ohms;0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts
-@@ -0,0 +1,96 @@
-+/*
-+ * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ piscreen_pins: piscreen_pins {
-+ brcm,pins = <17 25 24 22>;
-+ brcm,function = <0 1 1 1>; /* in out out out */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ piscreen: piscreen@0{
-+ compatible = "ilitek,ili9486";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&piscreen_pins>;
-+
-+ spi-max-frequency = <24000000>;
-+ rotate = <270>;
-+ bgr;
-+ fps = <30>;
-+ buswidth = <8>;
-+ regwidth = <16>;
-+ reset-gpios = <&gpio 25 0>;
-+ dc-gpios = <&gpio 24 0>;
-+ led-gpios = <&gpio 22 1>;
-+ debug = <0>;
-+
-+ init = <0x10000b0 0x00
-+ 0x1000011
-+ 0x20000ff
-+ 0x100003a 0x55
-+ 0x1000036 0x28
-+ 0x10000c2 0x44
-+ 0x10000c5 0x00 0x00 0x00 0x00
-+ 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00
-+ 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00
-+ 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00
-+ 0x1000011
-+ 0x1000029>;
-+ };
-+
-+ piscreen_ts: piscreen-ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <17 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 17 0>;
-+ ti,swap-xy;
-+ ti,x-plate-ohms = /bits/ 16 <100>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ speed = <&piscreen>,"spi-max-frequency:0";
-+ rotate = <&piscreen>,"rotate:0";
-+ fps = <&piscreen>,"fps:0";
-+ debug = <&piscreen>,"debug:0";
-+ xohms = <&piscreen_ts>,"ti,x-plate-ohms;0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts
-@@ -0,0 +1,115 @@
-+/*
-+ * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ pitft_pins: pitft_pins {
-+ brcm,pins = <24 25>;
-+ brcm,function = <0 1>; /* in out */
-+ brcm,pull = <2 0>; /* pullup none */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ pitft: pitft@0{
-+ compatible = "ilitek,ili9340";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pitft_pins>;
-+
-+ spi-max-frequency = <32000000>;
-+ rotate = <90>;
-+ fps = <25>;
-+ bgr;
-+ buswidth = <8>;
-+ dc-gpios = <&gpio 25 0>;
-+ debug = <0>;
-+ };
-+
-+ pitft_ts@1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "st,stmpe610";
-+ reg = <1>;
-+
-+ spi-max-frequency = <500000>;
-+ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */
-+ interrupts = <24 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ interrupt-controller;
-+
-+ stmpe_touchscreen {
-+ compatible = "st,stmpe-ts";
-+ st,sample-time = <4>;
-+ st,mod-12b = <1>;
-+ st,ref-sel = <0>;
-+ st,adc-freq = <2>;
-+ st,ave-ctrl = <3>;
-+ st,touch-det-delay = <4>;
-+ st,settling = <2>;
-+ st,fraction-z = <7>;
-+ st,i-drive = <0>;
-+ };
-+
-+ stmpe_gpio: stmpe_gpio {
-+ #gpio-cells = <2>;
-+ compatible = "st,stmpe-gpio";
-+ /*
-+ * only GPIO2 is wired/available
-+ * and it is wired to the backlight
-+ */
-+ st,norequest-mask = <0x7b>;
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@3 {
-+ target-path = "/soc";
-+ __overlay__ {
-+ backlight {
-+ compatible = "gpio-backlight";
-+ gpios = <&stmpe_gpio 2 0>;
-+ default-on;
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ speed = <&pitft>,"spi-max-frequency:0";
-+ rotate = <&pitft>,"rotate:0";
-+ fps = <&pitft>,"fps:0";
-+ debug = <&pitft>,"debug:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
-@@ -0,0 +1,34 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+ pps: pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pps_pins>;
-+ gpios = <&gpio 18 0>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ pps_pins: pps_pins {
-+ brcm,pins = <18>;
-+ brcm,function = <0>; // in
-+ brcm,pull = <0>; // off
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&pps>,"gpios:4",
-+ <&pps_pins>,"brcm,pins:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts
-@@ -0,0 +1,46 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/*
-+This is the 2-channel overlay - only use it if you need both channels.
-+
-+Legal pin,function combinations for each channel:
-+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
-+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
-+
-+N.B.:
-+ 1) Pin 18 is the only one available on all platforms, and
-+ it is the one used by the I2S audio interface.
-+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-+ 2) The onboard analogue audio output uses both PWM channels.
-+ 3) So be careful mixing audio and PWM.
-+*/
-+
-+/ {
-+ fragment@0 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ pwm_pins: pwm_pins {
-+ brcm,pins = <18 19>;
-+ brcm,function = <2 2>; /* Alt5 */
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&pwm>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ __overrides__ {
-+ pin = <&pwm_pins>,"brcm,pins:0";
-+ pin2 = <&pwm_pins>,"brcm,pins:4";
-+ func = <&pwm_pins>,"brcm,function:0";
-+ func2 = <&pwm_pins>,"brcm,function:4";
-+ clock = <&clk_pwm>,"clock-frequency:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts
-@@ -0,0 +1,42 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/*
-+Legal pin,function combinations for each channel:
-+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
-+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
-+
-+N.B.:
-+ 1) Pin 18 is the only one available on all platforms, and
-+ it is the one used by the I2S audio interface.
-+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-+ 2) The onboard analogue audio output uses both PWM channels.
-+ 3) So be careful mixing audio and PWM.
-+*/
-+
-+/ {
-+ fragment@0 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ pwm_pins: pwm_pins {
-+ brcm,pins = <18>;
-+ brcm,function = <2>; /* Alt5 */
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&pwm>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ __overrides__ {
-+ pin = <&pwm_pins>,"brcm,pins:0";
-+ func = <&pwm_pins>,"brcm,function:0";
-+ clock = <&clk_pwm>,"clock-frequency:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts
-@@ -0,0 +1,45 @@
-+// Definitions for RaspiDACv3
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "jg,raspidacv3";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ pcm5122@4c {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm5122";
-+ reg = <0x4c>;
-+ status = "okay";
-+ };
-+
-+ tpa6130a2: tpa6130a2@60 {
-+ compatible = "ti,tpa6130a2";
-+ reg = <0x60>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts
-@@ -0,0 +1,34 @@
-+// Definitions for RPi DAC
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "rpi,rpi-dac";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target-path = "/";
-+ __overlay__ {
-+ pcm1794a-codec {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm1794a";
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts
-@@ -0,0 +1,82 @@
-+/*
-+ * Device Tree overlay for rpi-display by Watterott
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ rpi_display_pins: rpi_display_pins {
-+ brcm,pins = <18 23 24 25>;
-+ brcm,function = <1 1 1 0>; /* out out out in */
-+ brcm,pull = <0 0 0 2>; /* - - - up */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rpidisplay: rpi-display@0{
-+ compatible = "ilitek,ili9341";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rpi_display_pins>;
-+
-+ spi-max-frequency = <32000000>;
-+ rotate = <270>;
-+ bgr;
-+ fps = <30>;
-+ buswidth = <8>;
-+ reset-gpios = <&gpio 23 0>;
-+ dc-gpios = <&gpio 24 0>;
-+ led-gpios = <&gpio 18 1>;
-+ debug = <0>;
-+ };
-+
-+ rpidisplay_ts: rpi-display-ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <25 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 25 0>;
-+ ti,x-plate-ohms = /bits/ 16 <60>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+ __overrides__ {
-+ speed = <&rpidisplay>,"spi-max-frequency:0";
-+ rotate = <&rpidisplay>,"rotate:0";
-+ fps = <&rpidisplay>,"fps:0";
-+ debug = <&rpidisplay>,"debug:0";
-+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts
-@@ -0,0 +1,17 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+ rpi_ft5406: rpi_ft5406 {
-+ compatible = "rpi,rpi-ft5406";
-+ firmware = <&firmware>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for Rpi-Proto
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&sound>;
-+ __overlay__ {
-+ compatible = "rpi,rpi-proto";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ wm8731@1a {
-+ #sound-dai-cells = <0>;
-+ compatible = "wlf,wm8731";
-+ reg = <0x1a>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts
-@@ -0,0 +1,47 @@
-+// rpi-sense HAT
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ rpi-sense@46 {
-+ compatible = "rpi,rpi-sense";
-+ reg = <0x46>;
-+ keys-int-gpios = <&gpio 23 1>;
-+ status = "okay";
-+ };
-+
-+ lsm9ds1-magn@1c {
-+ compatible = "st,lsm9ds1-magn";
-+ reg = <0x1c>;
-+ status = "okay";
-+ };
-+
-+ lsm9ds1-accel6a {
-+ compatible = "st,lsm9ds1-accel";
-+ reg = <0x6a>;
-+ status = "okay";
-+ };
-+
-+ lps25h-press@5c {
-+ compatible = "st,lps25h-press";
-+ reg = <0x5c>;
-+ status = "okay";
-+ };
-+
-+ hts221-humid@5f {
-+ compatible = "st,hts221-humid";
-+ reg = <0x5f>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts
-@@ -0,0 +1,29 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&mmc>;
-+ __overlay__ {
-+ status = "disabled";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&sdhost>;
-+ frag1: __overlay__ {
-+ brcm,overclock-50 = <0>;
-+ brcm,pio-limit = <1>;
-+ status = "okay";
-+ };
-+ };
-+
-+ __overrides__ {
-+ overclock_50 = <&frag1>,"brcm,overclock-50:0";
-+ force_pio = <&frag1>,"brcm,force-pio?";
-+ pio_limit = <&frag1>,"brcm,pio-limit:0";
-+ debug = <&frag1>,"brcm,debug?";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts
-@@ -0,0 +1,32 @@
-+/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */
-+
-+/include/ "sdhost-overlay.dts"
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@3 {
-+ target = <&mmc>;
-+ sdio_mmc: __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio_pins>;
-+ non-removable;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@4 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ sdio_pins: sdio_pins {
-+ brcm,pins = <22 23 24 25 26 27>;
-+ brcm,function = <7 7 7 7 7 7>; /* ALT3 = SD1 */
-+ brcm,pull = <0 2 2 2 2 2>;
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ poll_once = <&sdio_mmc>,"non-removable?";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts
-@@ -0,0 +1,18 @@
-+// Description: Overlay to enable character device interface for SMI.
-+// Author: Luke Wren <luke@raspberrypi.org>
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ fragment@0 {
-+ target = <&soc>;
-+ __overlay__ {
-+ smi_dev {
-+ compatible = "brcm,bcm2835-smi-dev";
-+ smi_handle = <&smi>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts
-@@ -0,0 +1,69 @@
-+// Description: Overlay to enable NAND flash through
-+// the secondary memory interface
-+// Author: Luke Wren
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&smi>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&smi_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&soc>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ nand: flash@0 {
-+ compatible = "brcm,bcm2835-smi-nand";
-+ smi_handle = <&smi>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "stage2";
-+ // 128k
-+ reg = <0 0x20000>;
-+ read-only;
-+ };
-+ partition@1 {
-+ label = "firmware";
-+ // 16M
-+ reg = <0x20000 0x1000000>;
-+ read-only;
-+ };
-+ partition@2 {
-+ label = "root";
-+ // 2G (will need to use 64 bit for >=4G)
-+ reg = <0x1020000 0x80000000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ smi_pins: smi_pins {
-+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
-+ 12 13 14 15>;
-+ /* Alt 1: SMI */
-+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5
-+ 5 5 5 5 5>;
-+ /* /CS, /WE and /OE are pulled high, as they are
-+ generally active low signals */
-+ brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/smi-overlay.dts
-@@ -0,0 +1,37 @@
-+// Description: Overlay to enable the secondary memory interface peripheral
-+// Author: Luke Wren
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&smi>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&smi_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ smi_pins: smi_pins {
-+ /* Don't configure the top two address bits, as
-+ these are already used as ID_SD and ID_SC */
-+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15
-+ 16 17 18 19 20 21 22 23 24 25>;
-+ /* Alt 0: SMI */
-+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
-+ 5 5 5 5 5 5 5 5 5>;
-+ /* /CS, /WE and /OE are pulled high, as they are
-+ generally active low signals */
-+ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0
-+ 0 0 0 0 0 0 0>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts
-@@ -0,0 +1,31 @@
-+/*
-+ * Device tree overlay to move spi0 to gpio 35 to 39 on CM
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ cs-gpios = <&gpio 36 1>, <&gpio 35 1>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&spi0_cs_pins>;
-+ __overlay__ {
-+ bcrm,pins = <36 35>;
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0_pins>;
-+ __overlay__ {
-+ bcrm,pins = <37 38 39>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
-@@ -0,0 +1,216 @@
-+/*
-+ * tinylcd35-overlay.dts
-+ *
-+ * -------------------------------------------------
-+ * www.tinlylcd.com
-+ * -------------------------------------------------
-+ * Device---Driver-----BUS GPIO's
-+ * display tinylcd35 spi0.0 25 24 18
-+ * touch ads7846 spi0.1 5
-+ * rtc ds1307 i2c1-0068
-+ * rtc pcf8563 i2c1-0051
-+ * keypad gpio-keys --------- 17 22 27 23 28
-+ *
-+ *
-+ * TinyLCD.com 3.5 inch TFT
-+ *
-+ * Version 001
-+ * 5/3/2015 -- Noralf Trønnes Initial Device tree framework
-+ * 10/3/2015 -- tinylcd@gmail.com added ds1307 support.
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@0 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ status = "okay";
-+
-+ spidev@0{
-+ status = "disabled";
-+ };
-+
-+ spidev@1{
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ tinylcd35_pins: tinylcd35_pins {
-+ brcm,pins = <25 24 18>;
-+ brcm,function = <1>; /* out */
-+ };
-+ tinylcd35_ts_pins: tinylcd35_ts_pins {
-+ brcm,pins = <5>;
-+ brcm,function = <0>; /* in */
-+ };
-+ keypad_pins: keypad_pins {
-+ brcm,pins = <4 17 22 23 27>;
-+ brcm,function = <0>; /* in */
-+ brcm,pull = <1>; /* down */
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&spi0>;
-+ __overlay__ {
-+ /* needed to avoid dtc warning */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tinylcd35: tinylcd35@0{
-+ compatible = "neosec,tinylcd";
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&tinylcd35_pins>,
-+ <&tinylcd35_ts_pins>;
-+
-+ spi-max-frequency = <48000000>;
-+ rotate = <270>;
-+ fps = <20>;
-+ bgr;
-+ buswidth = <8>;
-+ reset-gpios = <&gpio 25 0>;
-+ dc-gpios = <&gpio 24 0>;
-+ led-gpios = <&gpio 18 1>;
-+ debug = <0>;
-+
-+ init = <0x10000B0 0x80
-+ 0x10000C0 0x0A 0x0A
-+ 0x10000C1 0x01 0x01
-+ 0x10000C2 0x33
-+ 0x10000C5 0x00 0x42 0x80
-+ 0x10000B1 0xD0 0x11
-+ 0x10000B4 0x02
-+ 0x10000B6 0x00 0x22 0x3B
-+ 0x10000B7 0x07
-+ 0x1000036 0x58
-+ 0x10000F0 0x36 0xA5 0xD3
-+ 0x10000E5 0x80
-+ 0x10000E5 0x01
-+ 0x10000B3 0x00
-+ 0x10000E5 0x00
-+ 0x10000F0 0x36 0xA5 0x53
-+ 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00
-+ 0x100003A 0x55
-+ 0x1000011
-+ 0x2000001
-+ 0x1000029>;
-+ };
-+
-+ tinylcd35_ts: tinylcd35_ts@1 {
-+ compatible = "ti,ads7846";
-+ reg = <1>;
-+ status = "disabled";
-+
-+ spi-max-frequency = <2000000>;
-+ interrupts = <5 2>; /* high-to-low edge triggered */
-+ interrupt-parent = <&gpio>;
-+ pendown-gpio = <&gpio 5 0>;
-+ ti,x-plate-ohms = /bits/ 16 <100>;
-+ ti,pressure-max = /bits/ 16 <255>;
-+ };
-+ };
-+ };
-+
-+ /* RTC */
-+
-+ fragment@3 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ pcf8563: pcf8563@51 {
-+ compatible = "nxp,pcf8563";
-+ reg = <0x51>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ fragment@4 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ds1307: ds1307@68 {
-+ compatible = "maxim,ds1307";
-+ reg = <0x68>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ /*
-+ * Values for input event code is found under the
-+ * 'Keys and buttons' heading in include/uapi/linux/input.h
-+ */
-+ fragment@5 {
-+ target-path = "/soc";
-+ __overlay__ {
-+ keypad: keypad {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&keypad_pins>;
-+ status = "disabled";
-+ autorepeat;
-+
-+ button@17 {
-+ label = "GPIO KEY_UP";
-+ linux,code = <103>;
-+ gpios = <&gpio 17 0>;
-+ };
-+ button@22 {
-+ label = "GPIO KEY_DOWN";
-+ linux,code = <108>;
-+ gpios = <&gpio 22 0>;
-+ };
-+ button@27 {
-+ label = "GPIO KEY_LEFT";
-+ linux,code = <105>;
-+ gpios = <&gpio 27 0>;
-+ };
-+ button@23 {
-+ label = "GPIO KEY_RIGHT";
-+ linux,code = <106>;
-+ gpios = <&gpio 23 0>;
-+ };
-+ button@4 {
-+ label = "GPIO KEY_ENTER";
-+ linux,code = <28>;
-+ gpios = <&gpio 4 0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ speed = <&tinylcd35>,"spi-max-frequency:0";
-+ rotate = <&tinylcd35>,"rotate:0";
-+ fps = <&tinylcd35>,"fps:0";
-+ debug = <&tinylcd35>,"debug:0";
-+ touch = <&tinylcd35_ts>,"status";
-+ touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0",
-+ <&tinylcd35_ts>,"interrupts:0",
-+ <&tinylcd35_ts>,"pendown-gpio:4";
-+ xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0";
-+ rtc-pcf = <&i2c1>,"status",
-+ <&pcf8563>,"status";
-+ rtc-ds = <&i2c1>,"status",
-+ <&ds1307>,"status";
-+ keypad = <&keypad>,"status";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts
-@@ -0,0 +1,38 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&uart1>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ uart1_pins: uart1_pins {
-+ brcm,pins = <14 15>;
-+ brcm,function = <2>; /* alt5 */
-+ brcm,pull = <0 2>;
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target-path = "/chosen";
-+ __overlay__ {
-+ bootargs = "8250.nr_uarts=1";
-+ };
-+ };
-+
-+ __overrides__ {
-+ txd1_pin = <&uart1_pins>,"brcm,pins:0";
-+ rxd1_pin = <&uart1_pins>,"brcm,pins:4";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts
-@@ -0,0 +1,30 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+ compatible = "brcm,bcm2708";
-+
-+ // There is no VGA driver module, but we need a platform device
-+ // node (that doesn't already use pinctrl) to hang the pinctrl
-+ // reference on - leds will do
-+
-+ fragment@0 {
-+ target = <&leds>;
-+ __overlay__ {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vga666_pins>;
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ vga666_pins: vga666_pins {
-+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12
-+ 13 14 15 16 17 18 19 20 21>;
-+ brcm,function = <6>; /* alt2 */
-+ brcm,pull = <0>; /* no pull */
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts
-@@ -0,0 +1,39 @@
-+// Definitions for w1-gpio module (without external pullup)
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+
-+ w1: onewire@0 {
-+ compatible = "w1-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&w1_pins>;
-+ gpios = <&gpio 4 0>;
-+ rpi,parasitic-power = <0>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ w1_pins: w1_pins {
-+ brcm,pins = <4>;
-+ brcm,function = <0>; // in (initially)
-+ brcm,pull = <0>; // off
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&w1>,"gpios:4",
-+ <&w1_pins>,"brcm,pins:0";
-+ pullup = <&w1>,"rpi,parasitic-power:0";
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts
-@@ -0,0 +1,41 @@
-+// Definitions for w1-gpio module (with external pullup)
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target-path = "/";
-+ __overlay__ {
-+
-+ w1: onewire@0 {
-+ compatible = "w1-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&w1_pins>;
-+ gpios = <&gpio 4 0>, <&gpio 5 1>;
-+ rpi,parasitic-power = <0>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&gpio>;
-+ __overlay__ {
-+ w1_pins: w1_pins {
-+ brcm,pins = <4 5>;
-+ brcm,function = <0 1>; // in out
-+ brcm,pull = <0 0>; // off off
-+ };
-+ };
-+ };
-+
-+ __overrides__ {
-+ gpiopin = <&w1>,"gpios:4",
-+ <&w1_pins>,"brcm,pins:0";
-+ extpullup = <&w1>,"gpios:16",
-+ <&w1_pins>,"brcm,pins:4";
-+ pullup = <&w1>,"rpi,parasitic-power:0";
-+ };
-+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 19:34:13 +0000