aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch
diff options
context:
space:
mode:
authorÁlvaro Fernández Rojas <noltari@gmail.com>2019-07-09 20:32:28 +0200
committerÁlvaro Fernández Rojas <noltari@gmail.com>2019-07-14 12:44:14 +0200
commit42954857190b9df16d9d873ecc7f6cc38e013e44 (patch)
tree98c588f629ff534d458eb0884782ea99672d7634 /target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch
parentf1875e902d0afb7d9b9e5285b4fd8da7f6c5e30a (diff)
downloadupstream-42954857190b9df16d9d873ecc7f6cc38e013e44.tar.gz
upstream-42954857190b9df16d9d873ecc7f6cc38e013e44.tar.bz2
upstream-42954857190b9df16d9d873ecc7f6cc38e013e44.zip
brcm2708: add linux 4.19 support
Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch176
1 files changed, 176 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch b/target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch
new file mode 100644
index 0000000000..fe71dd1e16
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0671-arm-dts-First-draft-of-upstream-Pi4-DTS.patch
@@ -0,0 +1,176 @@
+From 575145094f904ca3c50e07f69a4ffaea902eadd7 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 11 Jun 2019 18:08:05 +0100
+Subject: [PATCH 671/703] arm: dts: First draft of upstream Pi4 DTS
+
+I've attempted to follow the upstream conventions in the DT commits,
+but this is just presented here initially as a talking point.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 ++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 ++++++
+ 3 files changed, 144 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts
+ create mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
++ bcm2838-rpi-4-b.dtb \
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb
+ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2838-rpi-4-b.dts
+@@ -0,0 +1,118 @@
++// SPDX-License-Identifier: GPL-2.0
++/dts-v1/;
++#include "bcm2838.dtsi"
++#include "bcm2835-rpi.dtsi"
++#include "bcm2838-rpi.dtsi"
++
++/ {
++ compatible = "raspberrypi,4-model-b", "brcm,bcm2838";
++ model = "Raspberry Pi 4 Model B";
++
++ chosen {
++ /* 8250 auxiliary UART instead of pl011 */
++ stdout-path = "serial1:115200n8";
++ };
++
++ memory {
++ reg = <0 0 0x40000000>;
++ };
++
++ leds {
++ act {
++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
++ };
++
++ pwr {
++ label = "PWR";
++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
++ };
++
++ sd_io_1v8_reg: sd_io_1v8_reg {
++ status = "okay";
++ compatible = "regulator-gpio";
++ vin-supply = <&vdd_5v0_reg>;
++ regulator-name = "vdd-sd-io";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-settling-time-us = <5000>;
++
++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
++ states = <1800000 0x1
++ 3300000 0x0>;
++ };
++};
++
++&firmware {
++ expgpio: gpio {
++ compatible = "raspberrypi,firmware-gpio";
++ gpio-controller;
++ #gpio-cells = <2>;
++ gpio-line-names = "BT_ON",
++ "WL_ON",
++ "PWR_LED_OFF",
++ "GLOBAL_RESET",
++ "VDD_SD_IO_SEL",
++ "CAM_GPIO",
++ "",
++ "";
++ status = "okay";
++ };
++};
++
++&pwm1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
++ status = "okay";
++};
++
++/* SDHCI is used to control the SDIO for wireless */
++&sdhci {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_gpio34>;
++ status = "okay";
++ bus-width = <4>;
++ non-removable;
++ mmc-pwrseq = <&wifi_pwrseq>;
++
++ brcmf: wifi@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ };
++};
++
++/* EMMC2 is used to drive the SD card */
++&emmc2 {
++ status = "okay";
++ broken-cd;
++ vqmmc-supply = <&sd_io_1v8_reg>;
++};
++
++/* uart0 communicates with the BT module */
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm43438-bt";
++ max-speed = <2000000>;
++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
++ };
++};
++
++/* uart1 is mapped to the pin header */
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_gpio14>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2838-rpi.dtsi
+@@ -0,0 +1,25 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/ {
++ soc {
++ /delete-node/ mailbox@7e00b840;
++ };
++};
++
++&scb {
++ vchiq: mailbox@7e00b840 {
++ compatible = "brcm,bcm2838-vchiq";
++ reg = <0 0x7e00b840 0x3c>;
++ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
++ };
++};
++
++&dma {
++ /* The VPU firmware uses DMA channel 11 for VCHIQ */
++ brcm,dma-channel-mask = <0x1f5>;
++};
++
++&dma40 {
++ /* The VPU firmware DMA channel 11 for VCHIQ */
++ brcm,dma-channel-mask = <0x7000>;
++};