brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 194 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch b/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch
deleted file mode 100644
index 5ec631f7fd..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0652-overlays-Add-baudrate-parameter-to-i2c3-i2c6.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From 114845b6010b6e6a320804f2d86ab4d5dc5a06de Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 5 Aug 2019 14:17:14 +0100
-Subject: [PATCH] overlays: Add baudrate parameter to i2c3-i2c6
-
-The overlays for enabling the new BCM2711 I2C interfaces were lacking
-the means to configure the baud/clock rate.
-
-Also explictly set the default pins, rather than relying on the values
-in the base DTB.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/README           |  8 ++++++++
- arch/arm/boot/dts/overlays/i2c3-overlay.dts | 15 ++++++++++++---
- arch/arm/boot/dts/overlays/i2c4-overlay.dts | 15 ++++++++++++---
- arch/arm/boot/dts/overlays/i2c5-overlay.dts | 15 ++++++++++++---
- arch/arm/boot/dts/overlays/i2c6-overlay.dts | 15 ++++++++++++---
- 5 files changed, 56 insertions(+), 12 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1221,6 +1221,8 @@ Info:   Enable the i2c3 bus
- Load:   dtoverlay=i2c3,<param>
- Params: pins_2_3                Use GPIOs 2 and 3
-         pins_4_5                Use GPIOs 4 and 5 (default)
-+        baudrate                Set the baudrate for the interface (default
-+                                "100000")
- 
- 
- Name:   i2c4
-@@ -1228,6 +1230,8 @@ Info:   Enable the i2c4 bus
- Load:   dtoverlay=i2c4,<param>
- Params: pins_6_7                Use GPIOs 6 and 7
-         pins_8_9                Use GPIOs 8 and 9 (default)
-+        baudrate                Set the baudrate for the interface (default
-+                                "100000")
- 
- 
- Name:   i2c5
-@@ -1235,6 +1239,8 @@ Info:   Enable the i2c5 bus
- Load:   dtoverlay=i2c5,<param>
- Params: pins_10_11              Use GPIOs 10 and 11
-         pins_12_13              Use GPIOs 12 and 13 (default)
-+        baudrate                Set the baudrate for the interface (default
-+                                "100000")
- 
- 
- Name:   i2c6
-@@ -1242,6 +1248,8 @@ Info:   Enable the i2c6 bus
- Load:   dtoverlay=i2c6,<param>
- Params: pins_0_1                Use GPIOs 0 and 1
-         pins_22_23              Use GPIOs 22 and 23 (default)
-+        baudrate                Set the baudrate for the interface (default
-+                                "100000")
- 
- 
- Name:   i2s-gpio28-31
---- a/arch/arm/boot/dts/overlays/i2c3-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts
-@@ -6,10 +6,11 @@
- 
- 	fragment@0 {
- 		target = <&i2c3>;
--		__overlay__ {
-+		frag0: __overlay__ {
- 			status = "okay";
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&i2c3_pins>;
-+			clock-frequency = <100000>;
- 		};
- 	};
- 
-@@ -20,8 +21,16 @@
- 		};
- 	};
- 
-+	fragment@2 {
-+		target = <&i2c3_pins>;
-+		__overlay__ {
-+			brcm,pins = <4 5>;
-+		};
-+	};
-+
- 	__overrides__ {
--		pins_2_3 = <0>,"=1";
--		pins_4_5 = <0>,"!1";
-+		pins_2_3 = <0>,"=1!2";
-+		pins_4_5 = <0>,"!1=2";
-+		baudrate = <&frag0>, "clock-frequency:0";
- 	};
- };
---- a/arch/arm/boot/dts/overlays/i2c4-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts
-@@ -6,10 +6,11 @@
- 
- 	fragment@0 {
- 		target = <&i2c4>;
--		__overlay__ {
-+		frag0: __overlay__ {
- 			status = "okay";
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&i2c4_pins>;
-+			clock-frequency = <100000>;
- 		};
- 	};
- 
-@@ -20,8 +21,16 @@
- 		};
- 	};
- 
-+	fragment@2 {
-+		target = <&i2c4_pins>;
-+		__overlay__ {
-+			brcm,pins = <8 9>;
-+		};
-+	};
-+
- 	__overrides__ {
--		pins_6_7 = <0>,"=1";
--		pins_8_9 = <0>,"!1";
-+		pins_6_7 = <0>,"=1!2";
-+		pins_8_9 = <0>,"!1=2";
-+		baudrate = <&frag0>, "clock-frequency:0";
- 	};
- };
---- a/arch/arm/boot/dts/overlays/i2c5-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts
-@@ -6,10 +6,11 @@
- 
- 	fragment@0 {
- 		target = <&i2c5>;
--		__overlay__ {
-+		frag0: __overlay__ {
- 			status = "okay";
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&i2c5_pins>;
-+			clock-frequency = <100000>;
- 		};
- 	};
- 
-@@ -20,8 +21,16 @@
- 		};
- 	};
- 
-+	fragment@2 {
-+		target = <&i2c5_pins>;
-+		__overlay__ {
-+			brcm,pins = <12 13>;
-+		};
-+	};
-+
- 	__overrides__ {
--		pins_10_11 = <0>,"=1";
--		pins_12_13 = <0>,"!1";
-+		pins_10_11 = <0>,"=1!2";
-+		pins_12_13 = <0>,"!1=2";
-+		baudrate = <&frag0>, "clock-frequency:0";
- 	};
- };
---- a/arch/arm/boot/dts/overlays/i2c6-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts
-@@ -6,10 +6,11 @@
- 
- 	fragment@0 {
- 		target = <&i2c6>;
--		__overlay__ {
-+		frag0: __overlay__ {
- 			status = "okay";
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&i2c6_pins>;
-+			clock-frequency = <100000>;
- 		};
- 	};
- 
-@@ -20,8 +21,16 @@
- 		};
- 	};
- 
-+	fragment@2 {
-+		target = <&i2c6_pins>;
-+		__overlay__ {
-+			brcm,pins = <22 23>;
-+		};
-+	};
-+
- 	__overrides__ {
--		pins_0_1 = <0>,"=1";
--		pins_22_23 = <0>,"!1";
-+		pins_0_1 = <0>,"=1!2";
-+		pins_22_23 = <0>,"!1=2";
-+		baudrate = <&frag0>, "clock-frequency:0";
- 	};
- };