brcm2708: organize kernel patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 1129 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch b/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch
deleted file mode 100644
index 9be01fb6bf..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0632-ARM-dts-Add-bcm2711-rpi-4-b.dts-and-components.patch
+++ /dev/null
@@ -1,1129 +0,0 @@
-From ff78cbcd8d7d656a5f43abd2c744e610b8c6c740 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 29 May 2019 13:54:21 +0100
-Subject: [PATCH 632/806] ARM: dts: Add bcm2711-rpi-4-b.dts and components
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/Makefile            |   1 +
- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 320 ++++++++++++
- arch/arm/boot/dts/bcm2711.dtsi        |  50 ++
- arch/arm/boot/dts/bcm2838.dtsi        | 724 ++++++++++++++++++++++++++
- 4 files changed, 1095 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
- create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
- create mode 100644 arch/arm/boot/dts/bcm2838.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
- 	bcm2708-rpi-zero-w.dtb \
- 	bcm2709-rpi-2-b.dtb \
- 	bcm2710-rpi-3-b.dtb \
-+	bcm2711-rpi-4-b.dtb \
- 	bcm2710-rpi-3-b-plus.dtb \
- 	bcm2710-rpi-cm3.dtb
- 
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-@@ -0,0 +1,320 @@
-+/dts-v1/;
-+
-+#include "bcm2711.dtsi"
-+
-+/ {
-+	compatible = "raspberrypi,4-model-b", "brcm,bcm2838", "brcm,bcm2837";
-+	model = "Raspberry Pi 4 Model B";
-+	#address-cells = <2>;
-+	#size-cells = <1>;
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x0 0x0 0x0>;
-+	};
-+
-+	chosen {
-+		bootargs = "8250.nr_uarts=1 cma=64M";
-+	};
-+
-+	aliases {
-+		serial0 = &uart1;
-+		serial1 = &uart0;
-+		mmc0 = &emmc2;
-+		mmc1 = &mmcnr;
-+		mmc2 = &sdhost;
-+		/delete-property/ ethernet;
-+		/delete-property/ intc;
-+		ethernet0 = &genet;
-+	};
-+};
-+
-+&soc {
-+	virtgpio: virtgpio {
-+		compatible = "brcm,bcm2835-virtgpio";
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		firmware = <&firmware>;
-+		status = "okay";
-+	};
-+};
-+
-+&mmcnr {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&sdio_pins>;
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&firmware {
-+	expgpio: expgpio {
-+		compatible = "raspberrypi,firmware-gpio";
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		status = "okay";
-+	};
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins &bt_pins>;
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>;
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
-+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-+
-+	spidev0: spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <125000000>;
-+	};
-+
-+	spidev1: spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <125000000>;
-+	};
-+};
-+
-+// =============================================
-+// Board specific stuff here
-+
-+/ {
-+
-+	sd_io_1v8_reg: sd_io_1v8_reg {
-+		status = "okay";
-+		compatible = "regulator-gpio";
-+		vin-supply = <&vdd_5v0_reg>;
-+		regulator-name = "vdd-sd-io";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-settling-time-us = <5000>;
-+
-+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-+		states = <1800000 0x1
-+			  3300000 0x0>;
-+	};
-+};
-+
-+&sdhost {
-+	status = "disabled";
-+};
-+
-+&emmc2 {
-+	status = "okay";
-+	broken-cd;
-+	vqmmc-supply = <&sd_io_1v8_reg>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 42 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&expgpio 2 0>;
-+	};
-+};
-+
-+&audio {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&audio_pins>;
-+};
-+
-+&sdhost_gpio48 {
-+	brcm,pins = <22 23 24 25 26 27>;
-+	brcm,function = <BCM2835_FSEL_ALT0>;
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <9 10 11>;
-+		brcm,function = <BCM2835_FSEL_ALT0>;
-+	};
-+
-+	spi0_cs_pins: spi0_cs_pins {
-+		brcm,pins = <8 7>;
-+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+	};
-+
-+	spi3_pins: spi3_pins {
-+		brcm,pins = <1 2 3>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	spi3_cs_pins: spi3_cs_pins {
-+		brcm,pins = <0 24>;
-+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+	};
-+
-+	spi4_pins: spi4_pins {
-+		brcm,pins = <5 6 7>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	spi4_cs_pins: spi4_cs_pins {
-+		brcm,pins = <4 25>;
-+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+	};
-+
-+	spi5_pins: spi5_pins {
-+		brcm,pins = <13 14 15>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	spi5_cs_pins: spi5_cs_pins {
-+		brcm,pins = <12 26>;
-+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+	};
-+
-+	spi6_pins: spi6_pins {
-+		brcm,pins = <19 20 21>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	spi6_cs_pins: spi6_cs_pins {
-+		brcm,pins = <18 27>;
-+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <BCM2835_FSEL_ALT0>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <BCM2835_FSEL_ALT0>;
-+	};
-+
-+	i2c3_pins: i2c3 {
-+		brcm,pins = <4 5>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+
-+	i2c4_pins: i2c4 {
-+		brcm,pins = <8 9>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+
-+	i2c5_pins: i2c5 {
-+		brcm,pins = <12 13>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+
-+	i2c6_pins: i2c6 {
-+		brcm,pins = <22 23>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <BCM2835_FSEL_ALT0>;
-+	};
-+
-+	sdio_pins: sdio_pins {
-+		brcm,pins =     <34 35 36 37 38 39>;
-+		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
-+		brcm,pull =     <0 2 2 2 2 2>;
-+	};
-+
-+	bt_pins: bt_pins {
-+		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
-+				 // to fool pinctrl
-+		brcm,function = <0>;
-+		brcm,pull = <2>;
-+	};
-+
-+	uart0_pins: uart0_pins {
-+		brcm,pins = <32 33>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+		brcm,pull = <0 2>;
-+	};
-+
-+	uart1_pins: uart1_pins {
-+		brcm,pins;
-+		brcm,function;
-+		brcm,pull;
-+	};
-+
-+	uart2_pins: uart2_pins {
-+		brcm,pins = <0 1>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <0 2>;
-+	};
-+
-+	uart3_pins: uart3_pins {
-+		brcm,pins = <4 5>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <0 2>;
-+	};
-+
-+	uart4_pins: uart4_pins {
-+		brcm,pins = <8 9>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <0 2>;
-+	};
-+
-+	uart5_pins: uart5_pins {
-+		brcm,pins = <12 13>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <0 2>;
-+	};
-+
-+	audio_pins: audio_pins {
-+		brcm,pins = <40 41>;
-+		brcm,function = <4>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c2 {
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+/ {
-+	__overrides__ {
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2711.dtsi
-@@ -0,0 +1,50 @@
-+#include "bcm2838.dtsi"
-+#include "bcm270x.dtsi"
-+#include "bcm2708-rpi.dtsi"
-+
-+/ {
-+	soc {
-+		/delete-node/ mailbox@7e00b840;
-+		/delete-node/ v3d@7ec00000;
-+	};
-+
-+	__overrides__ {
-+		arm_freq;
-+	};
-+};
-+
-+&dma {
-+	brcm,dma-channel-mask = <0x7ef5>;
-+};
-+
-+&txp {
-+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&firmwarekms {
-+	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&smi {
-+	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&mmc {
-+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&mmcnr {
-+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&usb {
-+	reg = <0x7e980000 0x10000>,
-+	      <0x7e00b200 0x200>;
-+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&gpio {
-+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2838.dtsi
-@@ -0,0 +1,724 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include "bcm283x.dtsi"
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/soc/bcm2835-pm.h>
-+
-+/ {
-+	compatible = "brcm,bcm2838", "brcm,bcm2837";
-+
-+	interrupt-parent = <&gicv2>;
-+
-+	soc {
-+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
-+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
-+			 <0x40000000  0x0 0xff800000  0x00800000>;
-+		/* Emulate a contiguous 30-bit address range for DMA */
-+		dma-ranges = <0xc0000000  0x0 0x00000000  0x3c000000>;
-+
-+		/delete-node/ mailbox@7e00b840;
-+		/delete-node/ interrupt-controller@7e00f300;
-+
-+		local_intc: local_intc@40000000 {
-+			compatible = "brcm,bcm2836-l1-intc";
-+			reg = <0x40000000 0x100>;
-+		};
-+
-+		gicv2: gic400@40041000 {
-+			interrupt-controller;
-+			#interrupt-cells = <3>;
-+			compatible = "arm,gic-400";
-+			reg =	<0x40041000 0x1000>,
-+				<0x40042000 0x2000>,
-+				<0x40046000 0x2000>,
-+				<0x40048000 0x2000>;
-+		};
-+
-+		thermal: thermal@7d5d2200 {
-+			compatible = "brcm,avs-tmon-bcm2838";
-+			reg = <0x7d5d2200 0x2c>;
-+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "tmon";
-+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-+			#thermal-sensor-cells = <0>;
-+			status = "okay";
-+		};
-+
-+		pm: watchdog@7e100000 {
-+			reg = <0x7e100000 0x114>,
-+			      <0x7e00a000 0x24>,
-+			      <0x7ec11000 0x20>;
-+		};
-+
-+		rng@7e104000 {
-+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		uart2: serial@7e201400 {
-+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-+			reg = <0x7e201400 0x200>;
-+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_UART>,
-+				 <&clocks BCM2835_CLOCK_VPU>;
-+			clock-names = "uartclk", "apb_pclk";
-+			arm,primecell-periphid = <0x00241011>;
-+			status = "disabled";
-+		};
-+
-+		uart3: serial@7e201600 {
-+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-+			reg = <0x7e201600 0x200>;
-+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_UART>,
-+				 <&clocks BCM2835_CLOCK_VPU>;
-+			clock-names = "uartclk", "apb_pclk";
-+			arm,primecell-periphid = <0x00241011>;
-+			status = "disabled";
-+		};
-+
-+		uart4: serial@7e201800 {
-+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-+			reg = <0x7e201800 0x200>;
-+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_UART>,
-+				 <&clocks BCM2835_CLOCK_VPU>;
-+			clock-names = "uartclk", "apb_pclk";
-+			arm,primecell-periphid = <0x00241011>;
-+			status = "disabled";
-+		};
-+
-+		uart5: serial@7e201a00 {
-+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-+			reg = <0x7e201a00 0x200>;
-+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_UART>,
-+				 <&clocks BCM2835_CLOCK_VPU>;
-+			clock-names = "uartclk", "apb_pclk";
-+			arm,primecell-periphid = <0x00241011>;
-+			status = "disabled";
-+		};
-+
-+		spi@7e204000 {
-+			reg = <0x7e204000 0x0200>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		spi3: spi@7e204600 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204600 0x0200>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		spi4: spi@7e204800 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204800 0x0200>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		spi5: spi@7e204a00 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204a00 0x0200>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		spi6: spi@7e204c00 {
-+			compatible = "brcm,bcm2835-spi";
-+			reg = <0x7e204c00 0x0200>;
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c3: i2c@7e205600 {
-+			compatible = "brcm,bcm2835-i2c";
-+			reg = <0x7e205600 0x200>;
-+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c4: i2c@7e205800 {
-+			compatible = "brcm,bcm2835-i2c";
-+			reg = <0x7e205800 0x200>;
-+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c5: i2c@7e205a00 {
-+			compatible = "brcm,bcm2835-i2c";
-+			reg = <0x7e205a00 0x200>;
-+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c6: i2c@7e205c00 {
-+			compatible = "brcm,bcm2835-i2c";
-+			reg = <0x7e205c00 0x200>;
-+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2835_CLOCK_VPU>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		pixelvalve@7e206000 {
-+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		pixelvalve@7e207000 {
-+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		emmc2: emmc2@7e340000 {
-+			compatible = "brcm,bcm2711-emmc2";
-+			status = "okay";
-+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&clocks BCM2838_CLOCK_EMMC2>;
-+			reg = <0x7e340000 0x100>;
-+		};
-+
-+		hvs@7e400000 {
-+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		pixelvalve@7e807000 {
-+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+	};
-+
-+	arm-pmu {
-+		/*
-+		 * N.B. the A72 PMU support only exists in arch/arm64, hence
-+		 * the fallback to the A53 version.
-+		 */
-+		compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu";
-+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+	};
-+
-+	timer {
-+		compatible = "arm,armv7-timer";
-+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-+					  IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-+					  IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-+					  IRQ_TYPE_LEVEL_LOW)>,
-+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-+					  IRQ_TYPE_LEVEL_LOW)>;
-+		arm,cpu-registers-not-fw-configured;
-+		always-on;
-+	};
-+
-+	cpus: cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-+
-+		cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72";
-+			reg = <0>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0x000000d8>;
-+		};
-+
-+		cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72";
-+			reg = <1>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0x000000e0>;
-+		};
-+
-+		cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72";
-+			reg = <2>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0x000000e8>;
-+		};
-+
-+		cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a72";
-+			reg = <3>;
-+			enable-method = "spin-table";
-+			cpu-release-addr = <0x0 0x000000f0>;
-+		};
-+	};
-+
-+	v3dbus {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x7c500000  0x0 0xfc500000  0x03300000>,
-+			 <0x40000000  0x0 0xff800000  0x00800000>;
-+		dma-ranges = <0x00000000  0x0 0x00000000  0x3c000000>;
-+
-+		v3d: v3d@7ec04000 {
-+			compatible = "brcm,2711-v3d";
-+			reg =
-+			    <0x7ec00000 0x4000>,
-+			    <0x7ec04000 0x4000>;
-+			reg-names = "hub", "core0";
-+
-+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-+			resets = <&pm BCM2835_RESET_V3D>;
-+			clocks = <&clocks BCM2835_CLOCK_V3D>;
-+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "okay";
-+		};
-+	};
-+
-+	scb: scb {
-+		compatible = "simple-bus";
-+		#address-cells = <2>;
-+		#size-cells = <1>;
-+
-+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
-+			 <0x0 0x40000000  0x0 0xff800000  0x00800000>,
-+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>,
-+			 <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
-+		dma-ranges = <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
-+
-+		pcie_0: pcie@7d500000 {
-+			reg = <0x0 0x7d500000 0x9310>,
-+			      <0x0 0x7e00f300 0x20>;
-+			msi-controller;
-+			msi-parent = <&pcie_0>;
-+			#address-cells = <3>;
-+			#interrupt-cells = <1>;
-+			#size-cells = <2>;
-+			bus-range = <0x0 0x01>;
-+			compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie",
-+				     "brcm,pci-plat-dev";
-+			max-link-speed = <2>;
-+			tot-num-pcie = <1>;
-+			linux,pci-domain = <0>;
-+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "pcie", "msi";
-+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
-+						IRQ_TYPE_LEVEL_HIGH
-+					 0 0 0 2 &gicv2 GIC_SPI 144
-+						IRQ_TYPE_LEVEL_HIGH
-+					 0 0 0 3 &gicv2 GIC_SPI 145
-+						IRQ_TYPE_LEVEL_HIGH
-+					 0 0 0 4 &gicv2 GIC_SPI 146
-+						IRQ_TYPE_LEVEL_HIGH>;
-+
-+			/* Map outbound accesses from scb:0x6_00000000-03ffffff
-+			 * to pci:0x0_f8000000-fbffffff
-+			 */
-+			ranges = <0x02000000 0x0 0xf8000000  0x6 0x00000000
-+				  0x0 0x04000000>;
-+			/* Map inbound accesses from pci:0x0_00000000..ffffffff
-+			 * to scb:0x0_00000000-ffffffff
-+			 */
-+			dma-ranges = <0x02000000 0x0 0x00000000  0x0 0x00000000
-+				      0x1 0x00000000>;
-+			status = "okay";
-+		};
-+
-+		genet: genet@7d580000 {
-+			compatible = "brcm,genet-v5";
-+			reg = <0x0 0x7d580000 0x10000>;
-+			status = "okay";
-+			#address-cells = <0x1>;
-+			#size-cells = <0x1>;
-+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-+			phy-handle = <&phy1>;
-+			phy-mode = "rgmii";
-+			mdio@e14 {
-+				#address-cells = <0x0>;
-+				#size-cells = <0x1>;
-+				compatible = "brcm,genet-mdio-v5";
-+				reg = <0xe14 0x8>;
-+				reg-names = "mdio";
-+				phy1: genet-phy@0 {
-+					compatible =
-+						"ethernet-phy-ieee802.3-c22";
-+					/* No interrupts - use PHY_POLL */
-+					max-speed = <1000>;
-+					reg = <0x1>;
-+				};
-+			};
-+		};
-+
-+		xhci: xhci@7e9c0000 {
-+			compatible = "generic-xhci";
-+			status = "disabled";
-+			reg = <0x0 0x7e9c0000 0x100000>;
-+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		vchiq: mailbox@7e00b840 {
-+			compatible = "brcm,bcm2838-vchiq";
-+			reg = <0 0x7e00b840 0x3c>;
-+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		hevc-decoder@7eb00000 {
-+			compatible = "raspberrypi,argon-hevc-decoder";
-+			reg = <0x0 0x7eb00000 0x10000>;
-+			status = "okay";
-+		};
-+
-+		argon-local-intc@7eb10000 {
-+			compatible = "raspberrypi,argon-local-intc";
-+			reg = <0x0 0x7eb10000 0x1000>;
-+			status = "okay";
-+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
-+		h264-decoder@7eb20000 {
-+			compatible = "raspberrypi,argon-h264-decoder";
-+			reg = <0x0 0x7eb20000 0x10000>;
-+			status = "okay";
-+		};
-+
-+		vp9-decoder@7eb30000 {
-+			compatible = "raspberrypi,argon-vp9-decoder";
-+			reg = <0x0 0x7eb30000 0x10000>;
-+			status = "okay";
-+		};
-+	};
-+};
-+
-+&clk_osc {
-+	clock-frequency = <54000000>;
-+};
-+
-+&clocks {
-+	compatible = "brcm,bcm2838-cprman";
-+};
-+
-+&cpu_thermal {
-+	coefficients = <(-487)  410040>;
-+};
-+
-+&dsi0 {
-+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&dsi1 {
-+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&gpio {
-+	gpclk0_gpio49: gpclk0_gpio49 {
-+		brcm,pins = <49>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+		brcm,pull = <BCM2835_PUD_OFF>;
-+	};
-+	gpclk1_gpio50: gpclk1_gpio50 {
-+		brcm,pins = <50>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+		brcm,pull = <BCM2835_PUD_OFF>;
-+	};
-+	gpclk2_gpio51: gpclk2_gpio51 {
-+		brcm,pins = <51>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+		brcm,pull = <BCM2835_PUD_OFF>;
-+	};
-+
-+	i2c0_gpio46: i2c0_gpio46 {
-+		brcm,pins = <46 47>;
-+		brcm,function = <BCM2835_FSEL_ALT0>;
-+	};
-+	i2c1_gpio46: i2c1_gpio46 {
-+		brcm,pins = <46 47>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+	};
-+	i2c3_gpio2: i2c3_gpio2 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c3_gpio4: i2c3_gpio4 {
-+		brcm,pins = <4 5>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c4_gpio6: i2c4_gpio6 {
-+		brcm,pins = <6 7>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c4_gpio8: i2c4_gpio8 {
-+		brcm,pins = <8 9>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c5_gpio10: i2c5_gpio10 {
-+		brcm,pins = <10 11>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c5_gpio12: i2c5_gpio12 {
-+		brcm,pins = <12 13>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c6_gpio0: i2c6_gpio0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c6_gpio22: i2c6_gpio22 {
-+		brcm,pins = <22 23>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	i2c_slave_gpio8: i2c_slave_gpio8 {
-+		brcm,pins = <8 9 10 11>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	jtag_gpio48: jtag_gpio48 {
-+		brcm,pins = <48 49 50 51 52 53>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+	};
-+
-+	mii_gpio28: mii_gpio28 {
-+		brcm,pins = <28 29 30 31>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+	};
-+	mii_gpio36: mii_gpio36 {
-+		brcm,pins = <36 37 38 39>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+
-+	pcm_gpio50: pcm_gpio50 {
-+		brcm,pins = <50 51 52 53>;
-+		brcm,function = <BCM2835_FSEL_ALT2>;
-+	};
-+
-+	pwm0_gpio52: pwm0_gpio52 {
-+		brcm,pins = <52>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+		brcm,pull = <BCM2835_PUD_OFF>;
-+	};
-+	pwm1_gpio53: pwm1_gpio53 {
-+		brcm,pins = <53>;
-+		brcm,function = <BCM2835_FSEL_ALT1>;
-+		brcm,pull = <BCM2835_PUD_OFF>;
-+	};
-+
-+	/* The following group consists of:
-+         *  RGMII_START_STOP
-+         *  RGMII_RX_OK
-+         */
-+	rgmii_gpio35: rgmii_gpio35 {
-+		brcm,pins = <35 36>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+	};
-+	rgmii_irq_gpio34: rgmii_irq_gpio34 {
-+		brcm,pins = <34>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	rgmii_irq_gpio39: rgmii_irq_gpio39 {
-+		brcm,pins = <39>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+	};
-+	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-+		brcm,pins = <28 29>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-+		brcm,pins = <37 38>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+	};
-+
-+	spi0_gpio46: spi0_gpio46 {
-+		brcm,pins = <46 47 48 49>;
-+		brcm,function = <BCM2835_FSEL_ALT2>;
-+	};
-+	spi2_gpio46: spi2_gpio46 {
-+		brcm,pins = <46 47 48 49 50>;
-+		brcm,function = <BCM2835_FSEL_ALT5>;
-+	};
-+	spi3_gpio0: spi3_gpio0 {
-+		brcm,pins = <0 1 2 3>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+	spi4_gpio4: spi4_gpio4 {
-+		brcm,pins = <4 5 6 7>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+	spi5_gpio12: spi5_gpio12 {
-+		brcm,pins = <12 13 14 15>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+	spi6_gpio18: spi6_gpio18 {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <BCM2835_FSEL_ALT3>;
-+	};
-+
-+	uart2_gpio0: uart2_gpio0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-+	};
-+	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-+	};
-+	uart3_gpio4: uart3_gpio4 {
-+		brcm,pins = <4 5>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-+	};
-+	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-+		brcm,pins = <6 7>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-+	};
-+	uart4_gpio8: uart4_gpio8 {
-+		brcm,pins = <8 9>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-+	};
-+	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-+		brcm,pins = <10 11>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-+	};
-+	uart5_gpio12: uart5_gpio12 {
-+		brcm,pins = <12 13>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-+	};
-+	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-+		brcm,pins = <14 15>;
-+		brcm,function = <BCM2835_FSEL_ALT4>;
-+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-+	};
-+};
-+
-+&vec {
-+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&usb {
-+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&hdmi {
-+	interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&uart1 {
-+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&spi1 {
-+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&spi2 {
-+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&csi0 {
-+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&csi1 {
-+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&sdhci {
-+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&i2c0 {
-+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&i2c1 {
-+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&i2c2 {
-+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&gpio {
-+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&mailbox {
-+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&rng {
-+	compatible = "brcm,bcm2838-rng200";
-+};
-+
-+&sdhost {
-+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&uart0 {
-+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&dma {
-+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  7 */
-+		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  8 */
-+		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  9 */
-+		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 10 */
-+		/* DMA4 - 40 bit DMA engines */
-+		<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4    11 */
-+		<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4    12 */
-+		<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4    13 */
-+		<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4    14 */
-+	interrupt-names = "dma0",
-+			  "dma1",
-+			  "dma2",
-+			  "dma3",
-+			  "dma4",
-+			  "dma5",
-+			  "dma6",
-+			  "dma7",
-+			  "dma8",
-+			  "dma9",
-+			  "dma10",
-+			  "dma11",
-+			  "dma12",
-+			  "dma13",
-+			  "dma14";
-+	brcm,dma-channel-mask = <0x7ef5>;
-+};