brcm2708: update to latest patches from the RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 1187 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0530-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/brcm2708/patches-4.19/950-0530-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
new file mode 100644
index 0000000000..1622195683
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0530-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch
@@ -0,0 +1,1187 @@
+From 0677ac68d2063ba12ea08e847d08b7b25089a283 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 19 Feb 2019 22:06:59 +0000
+Subject: [PATCH 530/725] PCI: brcmstb: Add Broadcom STB PCIe host controller
+ driver
+
+This commit adds the basic Broadcom STB PCIe controller.  Missing is
+the ability to process MSI and also handle dma-ranges for inbound
+memory accesses.  These two functionalities are added in subsequent
+commits.
+
+The PCIe block contains an MDIO interface.  This is a local interface
+only accessible by the PCIe controller.  It cannot be used or shared
+by any other HW.  As such, the small amount of code for this
+controller is included in this driver as there is little upside to put
+it elsewhere.
+
+Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
+---
+ drivers/pci/controller/Kconfig        |    9 +
+ drivers/pci/controller/Makefile       |    2 +-
+ drivers/pci/controller/pcie-brcmstb.c | 1097 +++++++++++++++++++++++++
+ include/soc/brcmstb/memory_api.h      |   25 +
+ 4 files changed, 1132 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/pci/controller/pcie-brcmstb.c
+ create mode 100644 include/soc/brcmstb/memory_api.h
+
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -278,5 +278,14 @@ config VMD
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called vmd.
+ 
++config PCIE_BRCMSTB
++	tristate "Broadcom Brcmstb PCIe platform host driver"
++	depends on ARCH_BRCMSTB || BMIPS_GENERIC
++	depends on OF
++	depends on SOC_BRCMSTB
++	default ARCH_BRCMSTB || BMIPS_GENERIC
++	help
++	  Adds support for Broadcom Settop Box PCIe host controller.
++
+ source "drivers/pci/controller/dwc/Kconfig"
+ endmenu
+--- a/drivers/pci/controller/Makefile
++++ b/drivers/pci/controller/Makefile
+@@ -28,11 +28,11 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie
+ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
+ obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
+ obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+ obj-$(CONFIG_VMD) += vmd.o
+ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+ obj-y				+= dwc/
+ 
+-
+ # The following drivers are for devices that use the generic ACPI
+ # pci_root.c driver but don't support standard ECAM config access.
+ # They contain MCFG quirks to replace the generic ECAM accessors with
+--- /dev/null
++++ b/drivers/pci/controller/pcie-brcmstb.c
+@@ -0,0 +1,1097 @@
++// SPDX-License-Identifier: GPL-2.0
++/* Copyright (C) 2009 - 2017 Broadcom */
++
++#include <linux/clk.h>
++#include <linux/compiler.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/irqdomain.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/log2.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/of_platform.h>
++#include <linux/pci.h>
++#include <linux/printk.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
++#include <soc/brcmstb/memory_api.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include "../pci.h"
++
++/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
++#define BRCM_PCIE_CAP_REGS				0x00ac
++
++/*
++ * Broadcom Settop Box PCIe Register Offsets. The names are from
++ * the chip's RDB and we use them here so that a script can correlate
++ * this code and the RDB to prevent discrepancies.
++ */
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1		0x0188
++#define PCIE_RC_CFG_PRIV1_ID_VAL3			0x043c
++#define PCIE_RC_DL_MDIO_ADDR				0x1100
++#define PCIE_RC_DL_MDIO_WR_DATA				0x1104
++#define PCIE_RC_DL_MDIO_RD_DATA				0x1108
++#define PCIE_MISC_MISC_CTRL				0x4008
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI		0x4010
++#define PCIE_MISC_RC_BAR1_CONFIG_LO			0x402c
++#define PCIE_MISC_RC_BAR2_CONFIG_LO			0x4034
++#define PCIE_MISC_RC_BAR2_CONFIG_HI			0x4038
++#define PCIE_MISC_RC_BAR3_CONFIG_LO			0x403c
++#define PCIE_MISC_PCIE_CTRL				0x4064
++#define PCIE_MISC_PCIE_STATUS				0x4068
++#define PCIE_MISC_REVISION				0x406c
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT	0x4070
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI		0x4080
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI		0x4084
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG			0x4204
++#define PCIE_INTR2_CPU_BASE				0x4300
++
++/*
++ * Broadcom Settop Box PCIe Register Field shift and mask info. The
++ * names are from the chip's RDB and we use them here so that a script
++ * can correlate this code and the RDB to prevent discrepancies.
++ */
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK	0xc
++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT	0x2
++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK		0xffffff
++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT		0x0
++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK			0x1000
++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT			0xc
++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK		0x2000
++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT		0xd
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK			0x300000
++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT		0x14
++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK			0xf8000000
++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT			0x1b
++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK			0x7c00000
++#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT			0x16
++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK			0x1f
++#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT			0x0
++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK			0x1f
++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT			0x0
++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK			0x1f
++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT			0x0
++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK			0x1f
++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT			0x0
++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK			0x4
++#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT			0x2
++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK		0x1
++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT		0x0
++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK			0x80
++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT			0x7
++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK		0x20
++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT		0x5
++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK		0x10
++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT		0x4
++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK		0x40
++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT		0x6
++#define PCIE_MISC_REVISION_MAJMIN_MASK				0xffff
++#define PCIE_MISC_REVISION_MAJMIN_SHIFT				0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT	0x14
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT	0x4
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS	0xc
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK		0xff
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT	0x0
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK	0xff
++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT	0x0
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT	0x1b
++#define PCIE_RGR1_SW_INIT_1_PERST_MASK				0x1
++#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT				0x0
++
++#define BRCM_NUM_PCIE_OUT_WINS		0x4
++#define BRCM_MAX_SCB			0x4
++
++#define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
++#define BRCM_MSI_TARGET_ADDR_GT_4GB	0xffffffffcULL
++
++#define BURST_SIZE_128			0
++#define BURST_SIZE_256			1
++#define BURST_SIZE_512			2
++
++/* Offsets from PCIE_INTR2_CPU_BASE */
++#define STATUS				0x0
++#define SET				0x4
++#define CLR				0x8
++#define MASK_STATUS			0xc
++#define MASK_SET			0x10
++#define MASK_CLR			0x14
++
++#define PCIE_BUSNUM_SHIFT		20
++#define PCIE_SLOT_SHIFT			15
++#define PCIE_FUNC_SHIFT			12
++
++#if defined(__BIG_ENDIAN)
++#define	DATA_ENDIAN			2	/* PCIe->DDR inbound traffic */
++#define MMIO_ENDIAN			2	/* CPU->PCIe outbound traffic */
++#else
++#define	DATA_ENDIAN			0
++#define MMIO_ENDIAN			0
++#endif
++
++#define MDIO_PORT0			0x0
++#define MDIO_DATA_MASK			0x7fffffff
++#define MDIO_DATA_SHIFT			0x0
++#define MDIO_PORT_MASK			0xf0000
++#define MDIO_PORT_SHIFT			0x16
++#define MDIO_REGAD_MASK			0xffff
++#define MDIO_REGAD_SHIFT		0x0
++#define MDIO_CMD_MASK			0xfff00000
++#define MDIO_CMD_SHIFT			0x14
++#define MDIO_CMD_READ			0x1
++#define MDIO_CMD_WRITE			0x0
++#define MDIO_DATA_DONE_MASK		0x80000000
++#define MDIO_RD_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
++#define MDIO_WT_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
++#define SSC_REGS_ADDR			0x1100
++#define SET_ADDR_OFFSET			0x1f
++#define SSC_CNTL_OFFSET			0x2
++#define SSC_CNTL_OVRD_EN_MASK		0x8000
++#define SSC_CNTL_OVRD_EN_SHIFT		0xf
++#define SSC_CNTL_OVRD_VAL_MASK		0x4000
++#define SSC_CNTL_OVRD_VAL_SHIFT		0xe
++#define SSC_STATUS_OFFSET		0x1
++#define SSC_STATUS_SSC_MASK		0x400
++#define SSC_STATUS_SSC_SHIFT		0xa
++#define SSC_STATUS_PLL_LOCK_MASK	0x800
++#define SSC_STATUS_PLL_LOCK_SHIFT	0xb
++
++#define IDX_ADDR(pcie)	\
++	((pcie)->reg_offsets[EXT_CFG_INDEX])
++#define DATA_ADDR(pcie)	\
++	((pcie)->reg_offsets[EXT_CFG_DATA])
++#define PCIE_RGR1_SW_INIT_1(pcie) \
++	((pcie)->reg_offsets[RGR1_SW_INIT_1])
++
++enum {
++	RGR1_SW_INIT_1,
++	EXT_CFG_INDEX,
++	EXT_CFG_DATA,
++};
++
++enum {
++	RGR1_SW_INIT_1_INIT_MASK,
++	RGR1_SW_INIT_1_INIT_SHIFT,
++	RGR1_SW_INIT_1_PERST_MASK,
++	RGR1_SW_INIT_1_PERST_SHIFT,
++};
++
++enum pcie_type {
++	BCM7425,
++	BCM7435,
++	GENERIC,
++	BCM7278,
++};
++
++struct brcm_window {
++	dma_addr_t pcie_addr;
++	phys_addr_t cpu_addr;
++	dma_addr_t size;
++};
++
++/* Internal PCIe Host Controller Information.*/
++struct brcm_pcie {
++	struct device		*dev;
++	void __iomem		*base;
++	struct list_head	resources;
++	int			irq;
++	struct clk		*clk;
++	struct pci_bus		*root_bus;
++	struct device_node	*dn;
++	int			id;
++	bool			suspended;
++	int			num_out_wins;
++	bool			ssc;
++	int			gen;
++	struct brcm_window	out_wins[BRCM_NUM_PCIE_OUT_WINS];
++	unsigned int		rev;
++	const int		*reg_offsets;
++	const int		*reg_field_info;
++	enum pcie_type		type;
++};
++
++struct pcie_cfg_data {
++	const int *reg_field_info;
++	const int *offsets;
++	const enum pcie_type type;
++};
++
++static const int pcie_reg_field_info[] = {
++	[RGR1_SW_INIT_1_INIT_MASK] = 0x2,
++	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
++};
++
++static const int pcie_reg_field_info_bcm7278[] = {
++	[RGR1_SW_INIT_1_INIT_MASK] = 0x1,
++	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
++};
++
++static const int pcie_offset_bcm7425[] = {
++	[RGR1_SW_INIT_1] = 0x8010,
++	[EXT_CFG_INDEX]  = 0x8300,
++	[EXT_CFG_DATA]   = 0x8304,
++};
++
++static const struct pcie_cfg_data bcm7425_cfg = {
++	.reg_field_info	= pcie_reg_field_info,
++	.offsets	= pcie_offset_bcm7425,
++	.type		= BCM7425,
++};
++
++static const int pcie_offsets[] = {
++	[RGR1_SW_INIT_1] = 0x9210,
++	[EXT_CFG_INDEX]  = 0x9000,
++	[EXT_CFG_DATA]   = 0x9004,
++};
++
++static const struct pcie_cfg_data bcm7435_cfg = {
++	.reg_field_info	= pcie_reg_field_info,
++	.offsets	= pcie_offsets,
++	.type		= BCM7435,
++};
++
++static const struct pcie_cfg_data generic_cfg = {
++	.reg_field_info	= pcie_reg_field_info,
++	.offsets	= pcie_offsets,
++	.type		= GENERIC,
++};
++
++static const int pcie_offset_bcm7278[] = {
++	[RGR1_SW_INIT_1] = 0xc010,
++	[EXT_CFG_INDEX] = 0x9000,
++	[EXT_CFG_DATA] = 0x9004,
++};
++
++static const struct pcie_cfg_data bcm7278_cfg = {
++	.reg_field_info = pcie_reg_field_info_bcm7278,
++	.offsets	= pcie_offset_bcm7278,
++	.type		= BCM7278,
++};
++
++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
++					int where);
++
++static struct pci_ops brcm_pcie_ops = {
++	.map_bus = brcm_pcie_map_conf,
++	.read = pci_generic_config_read,
++	.write = pci_generic_config_write,
++};
++
++#if defined(CONFIG_MIPS)
++/* Broadcom MIPs HW implicitly does the swapping if necessary */
++#define bcm_readl(a)		__raw_readl(a)
++#define bcm_writel(d, a)	__raw_writel(d, a)
++#define bcm_readw(a)		__raw_readw(a)
++#define bcm_writew(d, a)	__raw_writew(d, a)
++#else
++#define bcm_readl(a)		readl(a)
++#define bcm_writel(d, a)	writel(d, a)
++#define bcm_readw(a)		readw(a)
++#define bcm_writew(d, a)	writew(d, a)
++#endif
++
++/* These macros extract/insert fields to host controller's register set. */
++#define RD_FLD(base, reg, field) \
++	rd_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT)
++#define WR_FLD(base, reg, field, val) \
++	wr_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
++#define WR_FLD_RB(base, reg, field, val) \
++	wr_fld_rb(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
++#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \
++	wr_fld(base + reg + off, reg##_##field##_MASK, \
++	       reg##_##field##_SHIFT, val)
++#define EXTRACT_FIELD(val, reg, field) \
++	((val & reg##_##field##_MASK) >> reg##_##field##_SHIFT)
++#define INSERT_FIELD(val, reg, field, field_val) \
++	((val & ~reg##_##field##_MASK) | \
++	 (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT)))
++
++static phys_addr_t scb_size[BRCM_MAX_SCB];
++static int num_memc;
++static int num_pcie;
++static DEFINE_MUTEX(brcm_pcie_lock);
++
++static u32 rd_fld(void __iomem *p, u32 mask, int shift)
++{
++	return (bcm_readl(p) & mask) >> shift;
++}
++
++static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val)
++{
++	u32 reg = bcm_readl(p);
++
++	reg = (reg & ~mask) | ((val << shift) & mask);
++	bcm_writel(reg, p);
++}
++
++static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val)
++{
++	wr_fld(p, mask, shift, val);
++	(void)bcm_readl(p);
++}
++
++static const char *link_speed_to_str(int s)
++{
++	switch (s) {
++	case 1:
++		return "2.5";
++	case 2:
++		return "5.0";
++	case 3:
++		return "8.0";
++	default:
++		break;
++	}
++	return "???";
++}
++
++/*
++ * The roundup_pow_of_two() from log2.h invokes
++ * __roundup_pow_of_two(unsigned long), but we really need a
++ * such a function to take a native u64 since unsigned long
++ * is 32 bits on some configurations.  So we provide this helper
++ * function below.
++ */
++static u64 roundup_pow_of_two_64(u64 n)
++{
++	return 1ULL << fls64(n - 1);
++}
++
++/*
++ * This is to convert the size of the inbound "BAR" region to the
++ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
++ */
++int encode_ibar_size(u64 size)
++{
++	int log2_in = ilog2(size);
++
++	if (log2_in >= 12 && log2_in <= 15)
++		/* Covers 4KB to 32KB (inclusive) */
++		return (log2_in - 12) + 0x1c;
++	else if (log2_in >= 16 && log2_in <= 37)
++		/* Covers 64KB to 32GB, (inclusive) */
++		return log2_in - 15;
++	/* Something is awry so disable */
++	return 0;
++}
++
++static u32 mdio_form_pkt(int port, int regad, int cmd)
++{
++	u32 pkt = 0;
++
++	pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
++	pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
++	pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
++
++	return pkt;
++}
++
++/* negative return value indicates error */
++static int mdio_read(void __iomem *base, u8 port, u8 regad)
++{
++	int tries;
++	u32 data;
++
++	bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ),
++		   base + PCIE_RC_DL_MDIO_ADDR);
++	bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
++
++	data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++	for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
++		udelay(10);
++		data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
++	}
++
++	return MDIO_RD_DONE(data)
++		? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT
++		: -EIO;
++}
++
++/* negative return value indicates error */
++static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata)
++{
++	int tries;
++	u32 data;
++
++	bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
++		   base + PCIE_RC_DL_MDIO_ADDR);
++	bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
++	bcm_writel(MDIO_DATA_DONE_MASK | wrdata,
++		   base + PCIE_RC_DL_MDIO_WR_DATA);
++
++	data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++	for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
++		udelay(10);
++		data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
++	}
++
++	return MDIO_WT_DONE(data) ? 0 : -EIO;
++}
++
++/*
++ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative
++ * return value indicates error.
++ */
++static int set_ssc(void __iomem *base)
++{
++	int tmp;
++	u16 wrdata;
++	int pll, ssc;
++
++	tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR);
++	if (tmp < 0)
++		return tmp;
++
++	tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET);
++	if (tmp < 0)
++		return tmp;
++
++	wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1);
++	wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1);
++	tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata);
++	if (tmp < 0)
++		return tmp;
++
++	usleep_range(1000, 2000);
++	tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET);
++	if (tmp < 0)
++		return tmp;
++
++	ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC);
++	pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK);
++
++	return (ssc && pll) ? 0 : -EIO;
++}
++
++/* Limits operation to a specific generation (1, 2, or 3) */
++static void set_gen(void __iomem *base, int gen)
++{
++	u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++	u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++
++	lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
++	bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
++
++	lnkctl2 = (lnkctl2 & ~0xf) | gen;
++	bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
++}
++
++static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
++				       unsigned int win, phys_addr_t cpu_addr,
++				       dma_addr_t  pcie_addr, dma_addr_t size)
++{
++	void __iomem *base = pcie->base;
++	phys_addr_t cpu_addr_mb, limit_addr_mb;
++	u32 tmp;
++
++	/* Set the base of the pcie_addr window */
++	bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN,
++		   base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8));
++	bcm_writel(upper_32_bits(pcie_addr),
++		   base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8));
++
++	cpu_addr_mb = cpu_addr >> 20;
++	limit_addr_mb = (cpu_addr + size - 1) >> 20;
++
++	/* Write the addr base low register */
++	WR_FLD_WITH_OFFSET(base, (win * 4),
++			   PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
++			   BASE, cpu_addr_mb);
++	/* Write the addr limit low register */
++	WR_FLD_WITH_OFFSET(base, (win * 4),
++			   PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
++			   LIMIT, limit_addr_mb);
++
++	if (pcie->type != BCM7435 && pcie->type != BCM7425) {
++		/* Write the cpu addr high register */
++		tmp = (u32)(cpu_addr_mb >>
++			PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
++		WR_FLD_WITH_OFFSET(base, (win * 8),
++				   PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI,
++				   BASE, tmp);
++		/* Write the cpu limit high register */
++		tmp = (u32)(limit_addr_mb >>
++			PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
++		WR_FLD_WITH_OFFSET(base, (win * 8),
++				   PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI,
++				   LIMIT, tmp);
++	}
++}
++
++/* Configuration space read/write support */
++static int cfg_index(int busnr, int devfn, int reg)
++{
++	return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT)
++		| ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT)
++		| (busnr << PCIE_BUSNUM_SHIFT)
++		| (reg & ~3);
++}
++
++/* The controller is capable of serving in both RC and EP roles */
++static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
++{
++	void __iomem *base = pcie->base;
++	u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
++
++	return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT);
++}
++
++static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
++{
++	void __iomem *base = pcie->base;
++	u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
++	u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE);
++	u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP);
++
++	return  (dla && plu) ? true : false;
++}
++
++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
++					int where)
++{
++	struct brcm_pcie *pcie = bus->sysdata;
++	void __iomem *base = pcie->base;
++	int idx;
++
++	/* Accesses to the RC go right to the RC registers if slot==0 */
++	if (pci_is_root_bus(bus))
++		return PCI_SLOT(devfn) ? NULL : base + where;
++
++	/* For devices, write to the config space index register */
++	idx = cfg_index(bus->number, devfn, where);
++	bcm_writel(idx, pcie->base + IDX_ADDR(pcie));
++	return base + DATA_ADDR(pcie) + (where & 0x3);
++}
++
++static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie,
++						unsigned int val)
++{
++	unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
++	u32 mask =  pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
++
++	wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift, val);
++}
++
++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie,
++				       unsigned int val)
++{
++	if (pcie->type != BCM7278)
++		wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie),
++			  PCIE_RGR1_SW_INIT_1_PERST_MASK,
++			  PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val);
++	else
++		/* Assert = 0, de-assert = 1 on 7278 */
++		WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val);
++}
++
++static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
++{
++	int i, ret = 0;
++
++	mutex_lock(&brcm_pcie_lock);
++	if (num_pcie > 0) {
++		num_pcie++;
++		goto done;
++	}
++
++	/* Determine num_memc and their sizes */
++	for (i = 0, num_memc = 0; i < BRCM_MAX_SCB; i++) {
++		u64 size = brcmstb_memory_memc_size(i);
++
++		if (size == (u64)-1) {
++			dev_err(pcie->dev, "cannot get memc%d size\n", i);
++			ret = -EINVAL;
++			goto done;
++		} else if (size) {
++			scb_size[i] = roundup_pow_of_two_64(size);
++			num_memc++;
++		} else {
++			break;
++		}
++	}
++	if (!ret && num_memc == 0) {
++		ret = -EINVAL;
++		goto done;
++	}
++
++	num_pcie++;
++done:
++	mutex_unlock(&brcm_pcie_lock);
++	return ret;
++}
++
++static void brcm_pcie_remove_controller(struct brcm_pcie *pcie)
++{
++	mutex_lock(&brcm_pcie_lock);
++	if (--num_pcie == 0)
++		num_memc = 0;
++	mutex_unlock(&brcm_pcie_lock);
++}
++
++static int brcm_pcie_parse_request_of_pci_ranges(struct brcm_pcie *pcie)
++{
++	struct resource_entry *win;
++	int ret;
++
++	ret = devm_of_pci_get_host_bridge_resources(pcie->dev, 0, 0xff,
++						    &pcie->resources, NULL);
++	if (ret) {
++		dev_err(pcie->dev, "failed to get host resources\n");
++		return ret;
++	}
++
++	resource_list_for_each_entry(win, &pcie->resources) {
++		struct resource *parent, *res = win->res;
++		dma_addr_t offset = (dma_addr_t)win->offset;
++
++		if (resource_type(res) == IORESOURCE_IO) {
++			parent = &ioport_resource;
++		} else if (resource_type(res) == IORESOURCE_MEM) {
++			if (pcie->num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
++				dev_err(pcie->dev, "too many outbound wins\n");
++				return -EINVAL;
++			}
++			pcie->out_wins[pcie->num_out_wins].cpu_addr
++				= (phys_addr_t)res->start;
++			pcie->out_wins[pcie->num_out_wins].pcie_addr
++				= (dma_addr_t)(res->start
++					       - (phys_addr_t)offset);
++			pcie->out_wins[pcie->num_out_wins].size
++				= (dma_addr_t)(res->end - res->start + 1);
++			pcie->num_out_wins++;
++			parent = &iomem_resource;
++		} else {
++			continue;
++		}
++
++		ret = devm_request_resource(pcie->dev, parent, res);
++		if (ret) {
++			dev_err(pcie->dev, "failed to get res %pR\n", res);
++			return ret;
++		}
++	}
++	return 0;
++}
++
++static int brcm_pcie_setup(struct brcm_pcie *pcie)
++{
++	void __iomem *base = pcie->base;
++	unsigned int scb_size_val;
++	u64 rc_bar2_offset, rc_bar2_size, total_mem_size = 0;
++	u32 tmp, burst;
++	int i, j, ret, limit;
++	u16 nlw, cls, lnksta;
++	bool ssc_good = false;
++	struct device *dev = pcie->dev;
++
++	/* Reset the bridge */
++	brcm_pcie_bridge_sw_init_set(pcie, 1);
++
++	/*
++	 * Ensure that the fundamental reset is asserted, except for 7278,
++	 * which fails if we do this.
++	 */
++	if (pcie->type != BCM7278)
++		brcm_pcie_perst_set(pcie, 1);
++
++	usleep_range(100, 200);
++
++	/* Take the bridge out of reset */
++	brcm_pcie_bridge_sw_init_set(pcie, 0);
++
++	WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
++	/* Wait for SerDes to be stable */
++	usleep_range(100, 200);
++
++	/* Grab the PCIe hw revision number */
++	tmp = bcm_readl(base + PCIE_MISC_REVISION);
++	pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN);
++
++	/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
++	tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1);
++	tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1);
++	burst = (pcie->type == GENERIC || pcie->type == BCM7278)
++		? BURST_SIZE_512 : BURST_SIZE_256;
++	tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst);
++	bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL);
++
++	/*
++	 * Set up inbound memory view for the EP (called RC_BAR2,
++	 * not to be confused with the BARs that are advertised by
++	 * the EP).
++	 */
++	for (i = 0; i < num_memc; i++)
++		total_mem_size += scb_size[i];
++
++	/*
++	 * The PCIe host controller by design must set the inbound
++	 * viewport to be a contiguous arrangement of all of the
++	 * system's memory.  In addition, its size mut be a power of
++	 * two.  To further complicate matters, the viewport must
++	 * start on a pcie-address that is aligned on a multiple of its
++	 * size.  If a portion of the viewport does not represent
++	 * system memory -- e.g. 3GB of memory requires a 4GB viewport
++	 * -- we can map the outbound memory in or after 3GB and even
++	 * though the viewport will overlap the outbound memory the
++	 * controller will know to send outbound memory downstream and
++	 * everything else upstream.
++	 */
++	rc_bar2_size = roundup_pow_of_two_64(total_mem_size);
++
++	/*
++	 * Set simple configuration based on memory sizes
++	 * only.  We always start the viewport at address 0.
++	 */
++	rc_bar2_offset = 0;
++
++	tmp = lower_32_bits(rc_bar2_offset);
++	tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
++			   encode_ibar_size(rc_bar2_size));
++	bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
++	bcm_writel(upper_32_bits(rc_bar2_offset),
++		   base + PCIE_MISC_RC_BAR2_CONFIG_HI);
++
++	scb_size_val = scb_size[0]
++		? ilog2(scb_size[0]) - 15 : 0xf; /* 0xf is 1GB */
++	WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val);
++
++	if (num_memc > 1) {
++		scb_size_val = scb_size[1]
++			? ilog2(scb_size[1]) - 15 : 0xf; /* 0xf is 1GB */
++		WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB1_SIZE, scb_size_val);
++	}
++
++	if (num_memc > 2) {
++		scb_size_val = scb_size[2]
++			? ilog2(scb_size[2]) - 15 : 0xf; /* 0xf is 1GB */
++		WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB2_SIZE, scb_size_val);
++	}
++
++	/* disable the PCIe->GISB memory window (RC_BAR1) */
++	WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0);
++
++	/* disable the PCIe->SCB memory window (RC_BAR3) */
++	WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0);
++
++	if (!pcie->suspended) {
++		/* clear any interrupts we find on boot */
++		bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR);
++		(void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR);
++	}
++
++	/* Mask all interrupts since we are not handling any yet */
++	bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET);
++	(void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET);
++
++	if (pcie->gen)
++		set_gen(base, pcie->gen);
++
++	/* Unassert the fundamental reset */
++	brcm_pcie_perst_set(pcie, 0);
++
++	/*
++	 * Give the RC/EP time to wake up, before trying to configure RC.
++	 * Intermittently check status for link-up, up to a total of 100ms
++	 * when we don't know if the device is there, and up to 1000ms if
++	 * we do know the device is there.
++	 */
++	limit = pcie->suspended ? 1000 : 100;
++	for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie);
++	     j += i, i = i * 2)
++		msleep(i + j > limit ? limit - j : i);
++
++	if (!brcm_pcie_link_up(pcie)) {
++		dev_info(dev, "link down\n");
++		return -ENODEV;
++	}
++
++	if (!brcm_pcie_rc_mode(pcie)) {
++		dev_err(dev, "PCIe misconfigured; is in EP mode\n");
++		return -EINVAL;
++	}
++
++	for (i = 0; i < pcie->num_out_wins; i++)
++		brcm_pcie_set_outbound_win(pcie, i, pcie->out_wins[i].cpu_addr,
++					   pcie->out_wins[i].pcie_addr,
++					   pcie->out_wins[i].size);
++
++	/*
++	 * For config space accesses on the RC, show the right class for
++	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
++	 */
++	WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400);
++
++	if (pcie->ssc) {
++		ret = set_ssc(base);
++		if (ret == 0)
++			ssc_good = true;
++		else
++			dev_err(dev, "failed attempt to enter ssc mode\n");
++	}
++
++	lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
++	cls = lnksta & PCI_EXP_LNKSTA_CLS;
++	nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
++	dev_info(dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
++		 nlw, ssc_good ? "(SSC)" : "(!SSC)");
++
++	/* PCIe->SCB endian mode for BAR */
++	/* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */
++	WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1,
++		  ENDIAN_MODE_BAR2, DATA_ENDIAN);
++
++	/*
++	 * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
++	 * is enabled =>  setting the CLKREQ_DEBUG_ENABLE field to 1.
++	 */
++	WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1);
++
++	return 0;
++}
++
++/* L23 is a low-power PCIe link state */
++static void enter_l23(struct brcm_pcie *pcie)
++{
++	void __iomem *base = pcie->base;
++	int tries, l23;
++
++	/* assert request for L23 */
++	WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1);
++	/* poll L23 status */
++	for (tries = 0, l23 = 0; tries < 1000 && !l23; tries++)
++		l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23);
++	if (!l23)
++		dev_err(pcie->dev, "failed to enter L23\n");
++}
++
++static void turn_off(struct brcm_pcie *pcie)
++{
++	void __iomem *base = pcie->base;
++
++	if (brcm_pcie_link_up(pcie))
++		enter_l23(pcie);
++	/* Assert fundamental reset */
++	brcm_pcie_perst_set(pcie, 1);
++	/* Deassert request for L23 in case it was asserted */
++	WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0);
++	/* Turn off SerDes */
++	WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1);
++	/* Shutdown PCIe bridge */
++	brcm_pcie_bridge_sw_init_set(pcie, 1);
++}
++
++static int brcm_pcie_suspend(struct device *dev)
++{
++	struct brcm_pcie *pcie = dev_get_drvdata(dev);
++
++	turn_off(pcie);
++	clk_disable_unprepare(pcie->clk);
++	pcie->suspended = true;
++
++	return 0;
++}
++
++static int brcm_pcie_resume(struct device *dev)
++{
++	struct brcm_pcie *pcie = dev_get_drvdata(dev);
++	void __iomem *base;
++	int ret;
++
++	base = pcie->base;
++	clk_prepare_enable(pcie->clk);
++
++	/* Take bridge out of reset so we can access the SerDes reg */
++	brcm_pcie_bridge_sw_init_set(pcie, 0);
++
++	/* Turn on SerDes */
++	WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
++	/* Wait for SerDes to be stable */
++	usleep_range(100, 200);
++
++	ret = brcm_pcie_setup(pcie);
++	if (ret)
++		return ret;
++
++	pcie->suspended = false;
++
++	return 0;
++}
++
++static void _brcm_pcie_remove(struct brcm_pcie *pcie)
++{
++	turn_off(pcie);
++	clk_disable_unprepare(pcie->clk);
++	clk_put(pcie->clk);
++	brcm_pcie_remove_controller(pcie);
++}
++
++static int brcm_pcie_remove(struct platform_device *pdev)
++{
++	struct brcm_pcie *pcie = platform_get_drvdata(pdev);
++
++	pci_stop_root_bus(pcie->root_bus);
++	pci_remove_root_bus(pcie->root_bus);
++	_brcm_pcie_remove(pcie);
++
++	return 0;
++}
++
++static const struct of_device_id brcm_pcie_match[] = {
++	{ .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
++	{ .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
++	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
++	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
++	{},
++};
++MODULE_DEVICE_TABLE(of, brcm_pcie_match);
++
++static int brcm_pcie_probe(struct platform_device *pdev)
++{
++	struct device_node *dn = pdev->dev.of_node;
++	const struct of_device_id *of_id;
++	const struct pcie_cfg_data *data;
++	int ret;
++	struct brcm_pcie *pcie;
++	struct resource *res;
++	void __iomem *base;
++	u32 tmp;
++	struct pci_host_bridge *bridge;
++	struct pci_bus *child;
++
++	bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
++	if (!bridge)
++		return -ENOMEM;
++
++	pcie = pci_host_bridge_priv(bridge);
++	INIT_LIST_HEAD(&pcie->resources);
++
++	of_id = of_match_node(brcm_pcie_match, dn);
++	if (!of_id) {
++		dev_err(&pdev->dev, "failed to look up compatible string\n");
++		return -EINVAL;
++	}
++
++	if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) {
++		dev_err(&pdev->dev, "cannot yet handle dma-ranges\n");
++		return -EINVAL;
++	}
++
++	data = of_id->data;
++	pcie->reg_offsets = data->offsets;
++	pcie->reg_field_info = data->reg_field_info;
++	pcie->type = data->type;
++	pcie->dn = dn;
++	pcie->dev = &pdev->dev;
++
++	/* We use the domain number as our controller number */
++	pcie->id = of_get_pci_domain_nr(dn);
++	if (pcie->id < 0)
++		return pcie->id;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -EINVAL;
++
++	base = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++	pcie->clk = of_clk_get_by_name(dn, "sw_pcie");
++	if (IS_ERR(pcie->clk)) {
++		dev_err(&pdev->dev, "could not get clock\n");
++		pcie->clk = NULL;
++	}
++	pcie->base = base;
++
++	ret = of_pci_get_max_link_speed(dn);
++	pcie->gen = (ret < 0) ? 0 : ret;
++
++	pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc");
++
++	ret = irq_of_parse_and_map(pdev->dev.of_node, 0);
++	if (ret == 0)
++		/* keep going, as we don't use this intr yet */
++		dev_warn(pcie->dev, "cannot get PCIe interrupt\n");
++	else
++		pcie->irq = ret;
++
++	ret = brcm_pcie_parse_request_of_pci_ranges(pcie);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(pcie->clk);
++	if (ret) {
++		dev_err(&pdev->dev, "could not enable clock\n");
++		return ret;
++	}
++
++	ret = brcm_pcie_add_controller(pcie);
++	if (ret)
++		return ret;
++
++	ret = brcm_pcie_setup(pcie);
++	if (ret)
++		goto fail;
++
++	list_splice_init(&pcie->resources, &bridge->windows);
++	bridge->dev.parent = &pdev->dev;
++	bridge->busnr = 0;
++	bridge->ops = &brcm_pcie_ops;
++	bridge->sysdata = pcie;
++	bridge->map_irq = of_irq_parse_and_map_pci;
++	bridge->swizzle_irq = pci_common_swizzle;
++
++	ret = pci_scan_root_bus_bridge(bridge);
++	if (ret < 0) {
++		dev_err(pcie->dev, "Scanning root bridge failed\n");
++		goto fail;
++	}
++
++	pci_assign_unassigned_bus_resources(bridge->bus);
++	list_for_each_entry(child, &bridge->bus->children, node)
++		pcie_bus_configure_settings(child);
++	pci_bus_add_devices(bridge->bus);
++	platform_set_drvdata(pdev, pcie);
++	pcie->root_bus = bridge->bus;
++
++	return 0;
++
++fail:
++	_brcm_pcie_remove(pcie);
++	return ret;
++}
++
++static const struct dev_pm_ops brcm_pcie_pm_ops = {
++	.suspend_noirq = brcm_pcie_suspend,
++	.resume_noirq = brcm_pcie_resume,
++};
++
++static struct platform_driver brcm_pcie_driver = {
++	.probe = brcm_pcie_probe,
++	.remove = brcm_pcie_remove,
++	.driver = {
++		.name = "brcm-pcie",
++		.owner = THIS_MODULE,
++		.of_match_table = brcm_pcie_match,
++		.pm = &brcm_pcie_pm_ops,
++	},
++};
++
++module_platform_driver(brcm_pcie_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
++MODULE_AUTHOR("Broadcom");
+--- /dev/null
++++ b/include/soc/brcmstb/memory_api.h
+@@ -0,0 +1,25 @@
++#ifndef __MEMORY_API_H
++#define __MEMORY_API_H
++
++/*
++ * Bus Interface Unit control register setup, must happen early during boot,
++ * before SMP is brought up, called by machine entry point.
++ */
++void brcmstb_biuctrl_init(void);
++
++#ifdef CONFIG_SOC_BRCMSTB
++int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa);
++u64 brcmstb_memory_memc_size(int memc);
++#else
++static inline int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa)
++{
++	return -EINVAL;
++}
++
++static inline u64 brcmstb_memory_memc_size(int memc)
++{
++	return -1;
++}
++#endif
++
++#endif /* __MEMORY_API_H */