brcm2708: update to latest patches from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 206 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch b/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch
deleted file mode 100644
index 6d3aafff8c..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0504-BCM270X_DT-Add-non-removable-clone-of-mmc-node.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From e577bda00e07473910a871108d154e7a5f83d648 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 7 May 2019 14:29:38 +0100
-Subject: [PATCH 504/773] BCM270X_DT: Add non-removable clone of mmc node
-
-non-removable is a boolean property, and as such can't be unset by an
-overlay if it is set in a base DTB. Until now the workaround for this
-problem has been for overlays to clone non-removable nodes without
-the offending property, but this involves a lot of unnecessary
-replication. Instead, add a clone of the mmc node with non-removable
-already set to the base DTB, selecting the required version using
-the status properties.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/bcm2708-rpi-0-w.dts       |  4 +--
- arch/arm/boot/dts/bcm2708-rpi.dtsi          |  3 +-
- arch/arm/boot/dts/bcm270x.dtsi              | 13 ++++++++
- arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts  |  5 ++--
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts       |  5 ++--
- arch/arm/boot/dts/overlays/mmc-overlay.dts  |  7 +++++
- arch/arm/boot/dts/overlays/sdio-overlay.dts | 33 +++++++--------------
- 7 files changed, 38 insertions(+), 32 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
-@@ -14,6 +14,7 @@
- 	aliases {
- 		serial0 = &uart1;
- 		serial1 = &uart0;
-+		mmc1 = &mmcnr;
- 	};
- };
- 
-@@ -73,10 +74,9 @@
- 	};
- };
- 
--&mmc {
-+&mmcnr {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdio_pins>;
--	non-removable;
- 	bus-width = <4>;
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
-@@ -118,7 +118,8 @@
- 		sd_force_pio = <&sdhost>,"brcm,force-pio?";
- 		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
- 		sd_debug     = <&sdhost>,"brcm,debug";
--		sdio_overclock = <&mmc>,"brcm,overclock-50:0";
-+		sdio_overclock = <&mmc>,"brcm,overclock-50:0",
-+				 <&mmcnr>,"brcm,overclock-50:0";
- 		axiperf      = <&axiperf>,"status";
- 	};
- };
---- a/arch/arm/boot/dts/bcm270x.dtsi
-+++ b/arch/arm/boot/dts/bcm270x.dtsi
-@@ -79,6 +79,19 @@
- 			status = "disabled";
- 		};
- 
-+		/* A clone of mmc but with non-removable set */
-+		mmcnr: mmcnr@7e300000 {
-+			compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
-+			reg = <0x7e300000 0x100>;
-+			interrupts = <2 30>;
-+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
-+			dmas = <&dma 11>;
-+			dma-names = "rx-tx";
-+			brcm,overclock-50 = <0>;
-+			non-removable;
-+			status = "disabled";
-+		};
-+
- 		hvs: hvs@7e400000 {
- 			/* Add alias */
- 			status = "disabled";
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
-@@ -15,6 +15,7 @@
- 	aliases {
- 		serial0 = &uart1;
- 		serial1 = &uart0;
-+		mmc1 = &mmcnr;
- 	};
- };
- 
-@@ -74,13 +75,11 @@
- 	};
- };
- 
--&mmc {
-+&mmcnr {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdio_pins>;
--	non-removable;
- 	bus-width = <4>;
- 	status = "okay";
--	brcm,overclock-50 = <0>;
- };
- 
- &firmware {
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-@@ -15,6 +15,7 @@
- 	aliases {
- 		serial0 = &uart1;
- 		serial1 = &uart0;
-+		mmc1 = &mmcnr;
- 	};
- };
- 
-@@ -74,13 +75,11 @@
- 	};
- };
- 
--&mmc {
-+&mmcnr {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&sdio_pins>;
--	non-removable;
- 	bus-width = <4>;
- 	status = "okay";
--	brcm,overclock-50 = <0>;
- };
- 
- &soc {
---- a/arch/arm/boot/dts/overlays/mmc-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts
-@@ -33,6 +33,13 @@
- 		};
- 	};
- 
-+	fragment@3 {
-+		target = <&mmcnr>;
-+		__overlay__ {
-+			status = "disabled";
-+		};
-+	};
-+
- 	__overrides__ {
- 		overclock_50     = <&frag0>,"brcm,overclock-50:0";
- 	};
---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts
-@@ -1,39 +1,26 @@
- /dts-v1/;
- /plugin/;
- 
--/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */
-+/* Enable SDIO from MMC interface via various GPIO groups */
- 
- /{
- 	compatible = "brcm,bcm2835";
- 
- 	fragment@0 {
--		target = <&mmc>;
-+		target = <&mmcnr>;
- 		__overlay__ {
- 			status = "disabled";
- 		};
- 	};
- 
- 	fragment@1 {
--		target = <&soc>;
--		__overlay__ {
--			#address-cells = <1>;
--			#size-cells = <1>;
--
--			sdio_ovl: sdio@7e300000 {
--				compatible = "brcm,bcm2835-mmc",
--					     "brcm,bcm2835-sdhci";
--				reg = <0x7e300000 0x100>;
--				interrupts = <2 30>;
--				clocks = <&clocks 28/*BCM2835_CLOCK_EMMC*/>;
--				dmas = <&dma 11>;
--				dma-names = "rx-tx";
--				brcm,overclock-50 = <0>;
--				status = "okay";
--				pinctrl-names = "default";
--				pinctrl-0 = <&sdio_ovl_pins>;
--				non-removable;
--				bus-width = <4>;
--			};
-+		target = <&mmc>;
-+		sdio_ovl: __overlay__ {
-+			pinctrl-0 = <&sdio_ovl_pins>;
-+			pinctrl-names = "default";
-+			non-removable;
-+			bus-width = <4>;
-+			status = "okay";
- 		};
- 	};
- 
-@@ -75,7 +62,7 @@
- 	fragment@6 {
- 		target-path = "/aliases";
- 		__overlay__ {
--			mmc1 = "/soc/sdio@7e300000";
-+			mmc1 = "/soc/mmc@7e300000";
- 		};
- 	};
-