brcm2708: update to latest patches from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 109 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0348-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0348-overlays-balenaFin-v1.1.0-carrier-board-update.patch
new file mode 100644
index 0000000000..565f1daae4
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0348-overlays-balenaFin-v1.1.0-carrier-board-update.patch
@@ -0,0 +1,109 @@
+From 0ea3707233c090b6978f7cd941a75d5a3d1eacc8 Mon Sep 17 00:00:00 2001
+From: Zahari Petkov <zahari@balena.io>
+Date: Fri, 8 Feb 2019 13:03:38 +0200
+Subject: [PATCH 348/773] overlays: balenaFin v1.1.0 carrier board update
+
+A backward compatible update for the balenaFin carrier board for the
+Raspberry Pi Compute Module 3/3+ Lite.
+
+The updated overlay includes:
+  * support for the newly introduced RGB LEDs
+  * i2c-gpio and SDIO improvements
+  * DT based Marvell 88W8887 configuration
+
+Signed-off-by: Zahari Petkov <zahari@balena.io>
+---
+ arch/arm/boot/dts/overlays/README             |  2 +-
+ .../boot/dts/overlays/balena-fin-overlay.dts  | 46 ++++++++++++++++++-
+ 2 files changed, 45 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -472,7 +472,7 @@ Params: swap_lr                 Reverse
+ 
+ Name:   balena-fin
+ Info:   Overlay that enables WiFi, Bluetooth and the GPIO expander on the
+-        Balena Fin board.
++        balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
+ Load:   dtoverlay=balena-fin
+ Params: <None>
+ 
+--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
++++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
+@@ -11,6 +11,7 @@
+ 			pinctrl-0 = <&sdio_pins>;
+ 			bus-width = <4>;
+ 			brcm,overclock-50 = <35>;
++			non-removable;
+ 			status = "okay";
+ 		};
+ 	};
+@@ -34,7 +35,8 @@
+ 	fragment@2 {
+ 		target-path = "/";
+ 		__overlay__ {
+-			// We should investigate how to switch to mmc-pwrseq-sd8787
++			// We should switch to mmc-pwrseq-sd8787 after making it
++			// compatible with sd8887
+ 			// Currently that module requires two GPIOs to function since it
+ 			// targets a slightly different chip
+ 			power_ctrl: power_ctrl {
+@@ -46,10 +48,21 @@
+ 			i2c_soft: i2c@0 {
+ 				compatible = "i2c-gpio";
+ 				gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
+-				i2c-gpio,delay-us = <2>; /* ~100 kHz */
++				i2c-gpio,delay-us = <5>;
++				i2c-gpio,scl-open-drain;
++				i2c-gpio,sda-open-drain;
+ 				#address-cells = <1>;
+ 				#size-cells = <0>;
+ 			};
++
++			sd8xxx-wlan {
++				drvdbg = <0x6>;
++				drv_mode = <0x1>;
++				cfg80211_wext = <0xf>;
++				sta_name = "wlan";
++				wfd_name = "p2p";
++				cal_data_cfg = "none";
++			};
+ 		};
+ 	};
+ 
+@@ -74,6 +87,35 @@
+ 				reg = <0x68>;
+ 				status = "okay";
+ 			};
++
++			// RGB LEDs (>= v1.1.0)
++			pca9633: pca9633@62 {
++				compatible = "nxp,pca9633";
++				reg = <0x62>;
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				red@0 {
++					label = "red";
++					reg = <0>;
++					linux,default-trigger = "none";
++				};
++				green@1 {
++					label = "green";
++					reg = <1>;
++					linux,default-trigger = "none";
++				};
++				blue@2 {
++					label = "blue";
++					reg = <2>;
++					linux,default-trigger = "none";
++				};
++				unused@3 {
++					label = "unused";
++					reg = <3>;
++					linux,default-trigger = "none";
++				};
++			};
+ 		};
+ 	};
+ };