brcm2708: update to latest patches from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 85 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0323-dtoverlays-Correct-DT-handling-camera-GPIOs.patch b/target/linux/brcm2708/patches-4.19/950-0323-dtoverlays-Correct-DT-handling-camera-GPIOs.patch
new file mode 100644
index 0000000000..2d22f6b136
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0323-dtoverlays-Correct-DT-handling-camera-GPIOs.patch
@@ -0,0 +1,85 @@
+From 272b4a8b54d9aa54b889839f391062d167976d6c Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Tue, 18 Sep 2018 10:47:38 +0100
+Subject: [PATCH 323/773] dtoverlays: Correct DT handling camera GPIOs
+
+The firmware has support for updating overrides with the correct
+GPIO settings for the camera GPIOs, but the wrong device tree
+setup ended up being merged.
+Correct the DT configuration so that the firmware does set it
+up correctly.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm270x.dtsi                |  7 +++++++
+ arch/arm/boot/dts/overlays/README             | 10 +---------
+ arch/arm/boot/dts/overlays/ov5647-overlay.dts | 14 +++++++++++---
+ 3 files changed, 19 insertions(+), 12 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm270x.dtsi
++++ b/arch/arm/boot/dts/bcm270x.dtsi
+@@ -152,6 +152,13 @@
+ 		regulator-max-microvolt = <3300000>;
+ 		regulator-always-on;
+ 	};
++
++	__overrides__ {
++		cam0-pwdn-ctrl;
++		cam0-pwdn;
++		cam0-led-ctrl;
++		cam0-led;
++	};
+ };
+ 
+ &vc4 {
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1366,15 +1366,7 @@ Info:   Omnivision OV5647 camera module.
+         Uses Unicam 1, which is the standard camera connector on most Pi
+         variants.
+ Load:   dtoverlay=ov5647,<param>=<val>
+-Params: cam0-pwdn               GPIO used to control the sensor powerdown line.
+-
+-        cam0-led                GPIO used to control the sensor led
+-                                Both these fields should be automatically filled
+-                                in by the firmware to reflect the default GPIO
+-                                configuration of the particular Pi variant in
+-                                use.
+-
+-        i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
++Params: i2c_pins_0_1            Use pins 0&1 for the I2C instead of 44&45.
+                                 Useful on Compute Modules.
+ 
+         i2c_pins_28_29          Use pins 28&29 for the I2C instead of 44&45.
+--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
++++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
+@@ -14,7 +14,7 @@
+ 			status = "okay";
+ 
+ 			ov5647: ov5647@36 {
+-				compatible = "ov5647";
++				compatible = "ovti,ov5647";
+ 				reg = <0x36>;
+ 				status = "okay";
+ 
+@@ -82,10 +82,18 @@
+ 		};
+ 	};
+ 
++	fragment@6 {
++		target-path="/__overrides__";
++		__overlay__ {
++			cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0";
++			cam0-pwdn      = <&ov5647>,"pwdn-gpios:4";
++			cam0-led-ctrl  = <&ov5647>,"pwdn-gpios:12";
++			cam0-led       = <&ov5647>,"pwdn-gpios:16";
++		};
++	};
++
+ 	__overrides__ {
+ 		i2c_pins_0_1 = <0>,"-2-3+4";
+ 		i2c_pins_28_29 = <0>,"+2-3-4";
+-		cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
+-		cam0-led = <&ov5647>,"pwdn-gpios:16";
+ 	};
+ };