brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 107 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0262-overlays-sdio-Add-enhanced-1-bit-support.patch b/target/linux/brcm2708/patches-4.19/950-0262-overlays-sdio-Add-enhanced-1-bit-support.patch
deleted file mode 100644
index 42a9f112e9..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0262-overlays-sdio-Add-enhanced-1-bit-support.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 788109b357ddb30a95be72ce46dc22e2335131af Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 10 Jan 2019 15:27:56 +0000
-Subject: [PATCH] overlays: sdio: Add enhanced 1-bit support
-
-"dtoverlay=sdio,bus_width=1,gpios_22_25" is equivalent to the sdio-1bit
-overlay, which is now deprecated.
-
-"dtoverlay=sdio,bus_width=1,gpios_34_37" enables 1-bit mode on GPIOs 34-37.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/README           | 24 +++++++++++----------
- arch/arm/boot/dts/overlays/sdio-overlay.dts | 20 ++++++++++++++++-
- 2 files changed, 32 insertions(+), 12 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -479,8 +479,7 @@ Params: <None>
- 
- Name:   bmp085_i2c-sensor
- Info:   This overlay is now deprecated - see i2c-sensor
--Load:   dtoverlay=bmp085_i2c-sensor
--Params: <None>
-+Load:   <Deprecated>
- 
- 
- Name:   dht11
-@@ -1737,7 +1736,8 @@ Params: overclock_50            Clock (i
- 
- Name:   sdio
- Info:   Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
--        and enables SDIO via GPIOs 22-27.
-+        and enables SDIO via GPIOs 22-27. An example of use in 1-bit mode is
-+        "dtoverlay=sdio,bus_width=1,gpios_22_25"
- Load:   dtoverlay=sdio,<param>=<val>
- Params: sdio_overclock          SDIO Clock (in MHz) to use when the MMC
-                                 framework requests 50MHz
-@@ -1747,16 +1747,18 @@ Params: sdio_overclock          SDIO Clo
- 
-         bus_width               Set the SDIO host bus width (default 4 bits)
- 
-+        gpios_22_25             Select GPIOs 22-25 for 1-bit mode. Must be used
-+                                with bus_width=1. This replaces the sdio-1bit
-+                                overlay, which is now deprecated.
- 
--Name:   sdio-1bit
--Info:   Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
--        and enables 1-bit SDIO via GPIOs 22-25.
--Load:   dtoverlay=sdio-1bit,<param>=<val>
--Params: sdio_overclock          SDIO Clock (in MHz) to use when the MMC
--                                framework requests 50MHz
-+        gpios_34_37             Select GPIOs 34-37 for 1-bit mode. Must be used
-+                                with bus_width=1.
- 
--        poll_once               Disable SDIO-device polling every second
--                                (default on: polling once at boot-time)
-+
-+Name:   sdio-1bit
-+Info:   This overlay is now deprecated. Use
-+        "dtoverlay=sdio,bus_width=1,gpios_22_25" instead.
-+Load:   <Deprecated>
- 
- 
- Name:   sdtweak
---- a/arch/arm/boot/dts/overlays/sdio-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts
-@@ -32,7 +32,7 @@
- 				pinctrl-names = "default";
- 				pinctrl-0 = <&sdio_ovl_pins>;
- 				non-removable;
--				bus-width = <1>;
-+				bus-width = <4>;
- 			};
- 		};
- 	};
-@@ -49,6 +49,22 @@
- 	};
- 
- 	fragment@3 {
-+		target = <&sdio_ovl_pins>;
-+		__dormant__ {
-+			brcm,pins = <22 23 24 25>;
-+			brcm,pull = <0 2 2 2>;
-+		};
-+	};
-+
-+	fragment@4 {
-+		target = <&sdio_ovl_pins>;
-+		__dormant__ {
-+			brcm,pins = <34 35 36 37>;
-+			brcm,pull = <0 2 2 2>;
-+		};
-+	};
-+
-+	fragment@6 {
- 		target-path = "/aliases";
- 		__overlay__ {
- 			mmc1 = "/soc/sdio@7e300000";
-@@ -59,5 +75,7 @@
- 		poll_once = <&sdio_ovl>,"non-removable?";
- 		bus_width = <&sdio_ovl>,"bus-width:0";
- 		sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0";
-+		gpios_22_25 = <0>,"=3";
-+		gpios_34_37 = <0>,"=4";
- 	};
- };