brcm2708: update to latest patches from RPi Foundation

Also removes reverted patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 55 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch b/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch
deleted file mode 100644
index 340f60dd88..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0201-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 18867d71460b80385146e8d91a23cfb1729858f8 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 27 Nov 2018 16:56:50 +0000
-Subject: [PATCH] BCM270X_DT: Add new Ethernet DT parameters
-
-Add "eth_downshift_after" DT parameter to allow the delay before the
-downshift to be specified. The default is 2 auto-negotiation cycles,
-and legal values are 2, 3, 4, 5 and 0 (disabled).
-
-Add "eth_max_speed" DT parameter as a way of prohibiting 1000Mbps
-links. This can be used to avoid the delay until the downshift mechanism
-activates. Legal values are 10, 100 and 1000, where the default is
-unlimited (effectively 1000Mbps).
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 ++
- arch/arm/boot/dts/overlays/README          | 9 +++++++++
- 2 files changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
-@@ -50,5 +50,7 @@
- 		tx_lpi_timer = <&eth_phy>,"microchip,tx-lpi-timer:0";
- 		eth_led0 = <&eth_phy>,"microchip,led-modes:0";
- 		eth_led1 = <&eth_phy>,"microchip,led-modes:4";
-+		eth_downshift_after = <&eth_phy>,"microchip,downshift-after";
-+		eth_max_speed = <&eth_phy>,"max-speed:0";
- 	};
- };
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -98,6 +98,11 @@ Params:
-                                 compatible devices (default "on"). See also
-                                 "tx_lpi_timer".
- 
-+        eth_downshift_after     Set the number of auto-negotiation failures
-+                                after which the 1000Mbps modes are disabled.
-+                                Legal values are 2, 3, 4, 5 and 0, where
-+                                0 means never downshift (default 2).
-+
-         eth_led0                Set mode of LED0 (usually orange) (default
-                                 "1"). The legal values are:
-                                 0=link/activity          1=link1000/activity
-@@ -108,6 +113,10 @@ Params:
-         eth_led1                Set mode of LED1 (usually green) (default
-                                 "6"). See eth_led0 for legal values.
- 
-+        eth_max_speed           Set the maximum speed a link is allowed
-+                                to negotiate. Legal values are 10, 100 and
-+                                1000 (default 1000).
-+
-         i2c_arm                 Set to "on" to enable the ARM's i2c interface
-                                 (default "off")
-