aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
diff options
context:
space:
mode:
authorÁlvaro Fernández Rojas <noltari@gmail.com>2019-12-23 13:42:55 +0100
committerÁlvaro Fernández Rojas <noltari@gmail.com>2019-12-24 18:49:44 +0100
commit67dcc43f3a22dc3a7ac07a7065971b426feeb043 (patch)
tree0b647356dce45d2c79fd46cf201daa5089cc0934 /target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
parent47a93a810f78adce5a130d287f82b28e9b54313c (diff)
downloadupstream-67dcc43f3a22dc3a7ac07a7065971b426feeb043.tar.gz
upstream-67dcc43f3a22dc3a7ac07a7065971b426feeb043.tar.bz2
upstream-67dcc43f3a22dc3a7ac07a7065971b426feeb043.zip
brcm2708: organize kernel patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch103
1 files changed, 0 insertions, 103 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch b/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
deleted file mode 100644
index 63d3b3dce9..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0197-dt-bindings-Document-BCM283x-CSI2-CCP2-receiver.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 8299df54f2016290eed7a2bece3885aad36d13e2 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Wed, 31 Oct 2018 14:59:06 +0000
-Subject: [PATCH 197/806] dt-bindings: Document BCM283x CSI2/CCP2 receiver
-
-Document the DT bindings for the CSI2/CCP2 receiver peripheral
-(known as Unicam) on BCM283x SoCs.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Acked-by: Rob Herring <robh@kernel.org>
----
- .../bindings/media/bcm2835-unicam.txt | 85 +++++++++++++++++++
- 1 file changed, 85 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/media/bcm2835-unicam.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/media/bcm2835-unicam.txt
-@@ -0,0 +1,85 @@
-+Broadcom BCM283x Camera Interface (Unicam)
-+------------------------------------------
-+
-+The Unicam block on BCM283x SoCs is the receiver for either
-+CSI-2 or CCP2 data from image sensors or similar devices.
-+
-+The main platform using this SoC is the Raspberry Pi family of boards.
-+On the Pi the VideoCore firmware can also control this hardware block,
-+and driving it from two different processors will cause issues.
-+To avoid this, the firmware checks the device tree configuration
-+during boot. If it finds device tree nodes called csi0 or csi1 then
-+it will stop the firmware accessing the block, and it can then
-+safely be used via the device tree binding.
-+
-+Required properties:
-+===================
-+- compatible : must be "brcm,bcm2835-unicam".
-+- reg : physical base address and length of the register sets for the
-+ device.
-+- interrupts : should contain the IRQ line for this Unicam instance.
-+- clocks : list of clock specifiers, corresponding to entries in
-+ clock-names property.
-+- clock-names : must contain an "lp" entry, matching entries in the
-+ clocks property.
-+
-+Unicam supports a single port node. It should contain one 'port' child node
-+with child 'endpoint' node. Please refer to the bindings defined in
-+Documentation/devicetree/bindings/media/video-interfaces.txt.
-+
-+Within the endpoint node the "remote-endpoint" and "data-lanes" properties
-+are mandatory.
-+Data lane reordering is not supported so the data lanes must be in order,
-+starting at 1. The number of data lanes should represent the number of
-+usable lanes for the hardware block. That may be limited by either the SoC or
-+how the platform presents the interface, and the lower value must be used.
-+
-+Lane reordering is not supported on the clock lane either, so the optional
-+property "clock-lane" will implicitly be <0>.
-+Similarly lane inversion is not supported, therefore "lane-polarities" will
-+implicitly be <0 0 0 0 0>.
-+Neither of these values will be checked.
-+
-+Example:
-+ csi1: csi1@7e801000 {
-+ compatible = "brcm,bcm2835-unicam";
-+ reg = <0x7e801000 0x800>,
-+ <0x7e802004 0x4>;
-+ interrupts = <2 7>;
-+ clocks = <&clocks BCM2835_CLOCK_CAM1>;
-+ clock-names = "lp";
-+
-+ port {
-+ csi1_ep: endpoint {
-+ remote-endpoint = <&tc358743_0>;
-+ data-lanes = <1 2>;
-+ };
-+ };
-+ };
-+
-+ i2c0: i2c@7e205000 {
-+ tc358743: csi-hdmi-bridge@0f {
-+ compatible = "toshiba,tc358743";
-+ reg = <0x0f>;
-+
-+ clocks = <&tc358743_clk>;
-+ clock-names = "refclk";
-+
-+ tc358743_clk: bridge-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <27000000>;
-+ };
-+
-+ port {
-+ tc358743_0: endpoint {
-+ remote-endpoint = <&csi1_ep>;
-+ clock-lanes = <0>;
-+ data-lanes = <1 2>;
-+ clock-noncontinuous;
-+ link-frequencies =
-+ /bits/ 64 <297000000>;
-+ };
-+ };
-+ };
-+ };