brcm2708: update to latest patches from RPi Foundation

Also removes reverted patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 38 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
deleted file mode 100644
index 2df0d37b8d..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0026-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 6272fd1e55945522b156a28c1f605b69ae6e05b7 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Mon, 9 May 2016 17:28:18 -0700
-Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as
- critical.
-
-These divide off of PLLD_PER and are used for the ethernet and wifi
-PHYs source PLLs.  Neither of them is currently represented by a phy
-device that would grab the clock for us.
-
-This keeps other drivers from killing the networking PHYs when they
-disable their own clocks and trigger PLLD_PER's refcount going to 0.
-
-v2: Skip marking as critical if they aren't on at boot.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1454,6 +1454,15 @@ static struct clk_hw *bcm2835_register_c
- 	init.flags = data->flags | CLK_IGNORE_UNUSED;
- 
- 	/*
-+	 * Some GPIO clocks for ethernet/wifi PLLs are marked as
-+	 * critical (since some platforms use them), but if the
-+	 * firmware didn't have them turned on then they clearly
-+	 * aren't actually critical.
-+	 */
-+	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
-+		init.flags &= ~CLK_IS_CRITICAL;
-+
-+	/*
- 	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
- 	 * rate changes on at least of the parents.
- 	 */