brcm2708: add linux 4.19 support

Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 28 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
new file mode 100644
index 0000000000..478d0c9987
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0023-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
@@ -0,0 +1,28 @@
+From 06ad042c1d3b3471c478fee39a7539ac39b752ff Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 13 Feb 2017 17:20:08 +0000
+Subject: [PATCH 023/703] clk-bcm2835: Mark used PLLs and dividers CRITICAL
+
+The VPU configures and relies on several PLLs and dividers. Mark all
+enabled dividers and their PLLs as CRITICAL to prevent the kernel from
+switching them off.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1362,6 +1362,11 @@ bcm2835_register_pll_divider(struct bcm2
+ 	divider->div.hw.init = &init;
+ 	divider->div.table = NULL;
+ 
++	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
++		init.flags |= CLK_IS_CRITICAL;
++		divider->div.flags |= CLK_IS_CRITICAL;
++	}
++
+ 	divider->cprman = cprman;
+ 	divider->data = data;
+