brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 44 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0454-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch b/target/linux/brcm2708/patches-4.14/950-0454-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
new file mode 100644
index 0000000000..1821616b9d
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0454-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
@@ -0,0 +1,44 @@
+From 44c28420145101c846b445b8ae6159400909f69f Mon Sep 17 00:00:00 2001
+From: Joshua Emele <jemele@acm.org>
+Date: Wed, 7 Nov 2018 16:07:40 -0800
+Subject: [PATCH 454/454] lan78xx: Debounce link events to minimize poll storm
+
+The bInterval is set to 4 (i.e. 8 microframes => 1ms) and the only bit
+that the driver pays attention to is "link was reset". If there's a
+flapping status bit in that endpoint data, (such as if PHY negotiation
+needs a few tries to get a stable link) then polling at a slower rate
+would act as a de-bounce.
+
+See: https://github.com/raspberrypi/linux/issues/2447
+---
+ drivers/net/usb/lan78xx.c | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -425,6 +425,11 @@ static bool enable_tso;
+ module_param(enable_tso, bool, 0644);
+ MODULE_PARM_DESC(enable_tso, "Enables TCP segmentation offload");
+ 
++#define INT_URB_MICROFRAMES_PER_MS	8
++static int int_urb_interval_ms = 8;
++module_param(int_urb_interval_ms, int, 0);
++MODULE_PARM_DESC(int_urb_interval_ms, "Override usb interrupt urb interval");
++
+ static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
+ {
+ 	u32 *buf = kmalloc(sizeof(u32), GFP_KERNEL);
+@@ -3707,7 +3712,12 @@ static int lan78xx_probe(struct usb_inte
+ 	dev->pipe_intr = usb_rcvintpipe(dev->udev,
+ 					dev->ep_intr->desc.bEndpointAddress &
+ 					USB_ENDPOINT_NUMBER_MASK);
+-	period = dev->ep_intr->desc.bInterval;
++	if (int_urb_interval_ms <= 0)
++		period = dev->ep_intr->desc.bInterval;
++	else
++		period = int_urb_interval_ms * INT_URB_MICROFRAMES_PER_MS;
++
++	netif_notice(dev, probe, netdev, "int urb period %d\n", period);
+ 
+ 	maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0);
+ 	buf = kmalloc(maxp, GFP_KERNEL);