diff options
author | Stijn Tintel <stijn@linux-ipv6.be> | 2018-11-10 13:03:18 +0200 |
---|---|---|
committer | Stijn Tintel <stijn@linux-ipv6.be> | 2018-12-18 23:19:21 +0200 |
commit | f5919b65d4c671fd5083838c7a445f319f9a13c8 (patch) | |
tree | 2c791d2a5dea5bbbb0b85f86f74afce2647c0726 /target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch | |
parent | 822b4c3b250a254e74407056ccfd5c6aa38da162 (diff) | |
download | upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.gz upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.bz2 upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.zip |
brcm2708: add kernel 4.14 support
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89
Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""
Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch
Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.
Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch b/target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch new file mode 100644 index 0000000000..70341f629f --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0449-Add-overlay-for-SLB9760-Iridium-LetsTrust-TPM.patch @@ -0,0 +1,92 @@ +From 0e9dac6a2530f94fd8f3d195d929523536bc7ab2 Mon Sep 17 00:00:00 2001 +From: Peter Huewe <peterhuewe@gmx.de> +Date: Thu, 14 Jun 2018 22:51:24 +0200 +Subject: [PATCH 449/454] Add overlay for SLB9760 Iridium /LetsTrust TPM + +Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on +boards, which can be used as a secure key storage and hwrng. +available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by +pi3g. + +Signed-off-by: Peter Huewe <peterhuewe@gmx.de> +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 8 ++++ + .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 +++++++++++++++++++ + 3 files changed, 53 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -138,6 +138,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + tc358743.dtbo \ + tc358743-audio.dtbo \ + tinylcd35.dtbo \ ++ tpm-slb9670.dtbo \ + uart0.dtbo \ + uart1.dtbo \ + upstream.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1994,6 +1994,14 @@ Params: speed Display + dtoverlay=tinylcd35,touch,touchgpio=3 + + ++Name: tpm-slb9670 ++Info: Enables support for Infineon SLB9670 Trusted Platform Module add-on ++ boards, which can be used as a secure key storage and hwrng, ++ available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. ++Load: dtoverlay=tpm-slb9670 ++Params: <None> ++ ++ + Name: uart0 + Info: Change the pin usage of uart0 + Load: dtoverlay=uart0,<param>=<val> +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts +@@ -0,0 +1,44 @@ ++/* ++ * Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on ++ * boards, which can be used as a secure key storage and hwrng. ++ * available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ slb9670: slb9670@1 { ++ compatible = "infineon,slb9670"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <32000000>; ++ status = "okay"; ++ }; ++ ++ }; ++ }; ++}; |