brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 55 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0445-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch b/target/linux/brcm2708/patches-4.14/950-0445-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch
new file mode 100644
index 0000000000..94d8e09b15
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0445-BCM270X_DT-Add-new-Ethernet-DT-parameters.patch
@@ -0,0 +1,55 @@
+From d4539512edd83737f51377e3e87512040133628a Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 27 Nov 2018 16:56:50 +0000
+Subject: [PATCH 445/454] BCM270X_DT: Add new Ethernet DT parameters
+
+Add "eth_downshift_after" DT parameter to allow the delay before the
+downshift to be specified. The default is 2 auto-negotiation cycles,
+and legal values are 2, 3, 4, 5 and 0 (disabled).
+
+Add "eth_max_speed" DT parameter as a way of prohibiting 1000Mbps
+links. This can be used to avoid the delay until the downshift mechanism
+activates. Legal values are 10, 100 and 1000, where the default is
+unlimited (effectively 1000Mbps).
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 2 ++
+ arch/arm/boot/dts/overlays/README          | 9 +++++++++
+ 2 files changed, 11 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
++++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+@@ -48,5 +48,7 @@
+ 		tx_lpi_timer = <&ethernet>,"microchip,tx-lpi-timer:0";
+ 		eth_led0 = <&ethernet>,"microchip,led-modes:0";
+ 		eth_led1 = <&ethernet>,"microchip,led-modes:4";
++		eth_downshift_after = <&eth_phy>,"microchip,downshift-after:0";
++		eth_max_speed = <&eth_phy>,"max-speed:0";
+ 	};
+ };
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -98,6 +98,11 @@ Params:
+                                 compatible devices (default "on"). See also
+                                 "tx_lpi_timer".
+ 
++        eth_downshift_after     Set the number of auto-negotiation failures
++                                after which the 1000Mbps modes are disabled.
++                                Legal values are 2, 3, 4, 5 and 0, where
++                                0 means never downshift (default 2).
++
+         eth_led0                Set mode of LED0 (usually orange) (default
+                                 "1"). The legal values are:
+                                 0=link/activity          1=link1000/activity
+@@ -108,6 +113,10 @@ Params:
+         eth_led1                Set mode of LED1 (usually green) (default
+                                 "6"). See eth_led0 for legal values.
+ 
++        eth_max_speed           Set the maximum speed a link is allowed
++                                to negotiate. Legal values are 10, 100 and
++                                1000 (default 1000).
++
+         i2c_arm                 Set to "on" to enable the ARM's i2c interface
+                                 (default "off")
+