brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 56 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0436-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch b/target/linux/brcm2708/patches-4.14/950-0436-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch
new file mode 100644
index 0000000000..b68cef69d6
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0436-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch
@@ -0,0 +1,56 @@
+From e37bc7714591ac7a94200ee254a116904e19b784 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 29 Oct 2018 14:45:45 +0000
+Subject: [PATCH 436/454] Revert "rtc: pcf8523: properly handle oscillator stop
+ bit"
+
+This reverts commit ede44c908d44b166a5b6bd7caacd105c2ff5a70f.
+
+See: https://github.com/raspberrypi/firmware/issues/1065
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/rtc/rtc-pcf8523.c | 25 ++++++++++++++++++++++---
+ 1 file changed, 22 insertions(+), 3 deletions(-)
+
+--- a/drivers/rtc/rtc-pcf8523.c
++++ b/drivers/rtc/rtc-pcf8523.c
+@@ -178,8 +178,28 @@ static int pcf8523_rtc_read_time(struct
+ 	if (err < 0)
+ 		return err;
+ 
+-	if (regs[0] & REG_SECONDS_OS)
+-		return -EINVAL;
++	if (regs[0] & REG_SECONDS_OS) {
++		/*
++		 * If the oscillator was stopped, try to clear the flag. Upon
++		 * power-up the flag is always set, but if we cannot clear it
++		 * the oscillator isn't running properly for some reason. The
++		 * sensible thing therefore is to return an error, signalling
++		 * that the clock cannot be assumed to be correct.
++		 */
++
++		regs[0] &= ~REG_SECONDS_OS;
++
++		err = pcf8523_write(client, REG_SECONDS, regs[0]);
++		if (err < 0)
++			return err;
++
++		err = pcf8523_read(client, REG_SECONDS, &regs[0]);
++		if (err < 0)
++			return err;
++
++		if (regs[0] & REG_SECONDS_OS)
++			return -EAGAIN;
++	}
+ 
+ 	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
+ 	tm->tm_min = bcd2bin(regs[1] & 0x7f);
+@@ -215,7 +235,6 @@ static int pcf8523_rtc_set_time(struct d
+ 		return err;
+ 
+ 	regs[0] = REG_SECONDS;
+-	/* This will purposely overwrite REG_SECONDS_OS */
+ 	regs[1] = bin2bcd(tm->tm_sec);
+ 	regs[2] = bin2bcd(tm->tm_min);
+ 	regs[3] = bin2bcd(tm->tm_hour);