brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 49 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0401-staging-bcm2835-camera-Fix-logical-continuation-spli.patch b/target/linux/brcm2708/patches-4.14/950-0401-staging-bcm2835-camera-Fix-logical-continuation-spli.patch
new file mode 100644
index 0000000000..4f329bf4f2
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0401-staging-bcm2835-camera-Fix-logical-continuation-spli.patch
@@ -0,0 +1,49 @@
+From 7038689f4826a41b25f30ec416ab0b7ba0a4758c Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Wed, 21 Feb 2018 15:48:54 +0000
+Subject: [PATCH 401/454] staging: bcm2835-camera: Fix logical continuation
+ splits
+
+Fix checkpatch errors for "Logical continuations should be
+on the previous line".
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+---
+ .../vc04_services/bcm2835-camera/bcm2835-camera.c    | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
++++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+@@ -549,8 +549,8 @@ static int start_streaming(struct vb2_qu
+ 		msleep(300);
+ 
+ 	/* enable the connection from camera to encoder (if applicable) */
+-	if (dev->capture.camera_port != dev->capture.port
+-	    && dev->capture.camera_port) {
++	if (dev->capture.camera_port != dev->capture.port &&
++	    dev->capture.camera_port) {
+ 		ret = vchiq_mmal_port_enable(dev->instance,
+ 					     dev->capture.camera_port, NULL);
+ 		if (ret) {
+@@ -1063,8 +1063,8 @@ static int mmal_setup_components(struct
+ 	switch (mfmt->mmal_component) {
+ 	case COMP_CAMERA:
+ 		/* Make a further decision on port based on resolution */
+-		if (f->fmt.pix.width <= max_video_width
+-		    && f->fmt.pix.height <= max_video_height)
++		if (f->fmt.pix.width <= max_video_width &&
++		    f->fmt.pix.height <= max_video_height)
+ 			camera_port = port =
+ 			    &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO];
+ 		else
+@@ -1121,8 +1121,8 @@ static int mmal_setup_components(struct
+ 
+ 	ret = vchiq_mmal_port_set_format(dev->instance, camera_port);
+ 
+-	if (!ret
+-	    && camera_port ==
++	if (!ret &&
++	    camera_port ==
+ 	    &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) {
+ 		bool overlay_enabled =
+ 		    !!dev->component[COMP_PREVIEW]->enabled;