aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch
diff options
context:
space:
mode:
authorStijn Tintel <stijn@linux-ipv6.be>2018-11-10 13:03:18 +0200
committerStijn Tintel <stijn@linux-ipv6.be>2018-12-18 23:19:21 +0200
commitf5919b65d4c671fd5083838c7a445f319f9a13c8 (patch)
tree2c791d2a5dea5bbbb0b85f86f74afce2647c0726 /target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch
parent822b4c3b250a254e74407056ccfd5c6aa38da162 (diff)
downloadupstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.gz
upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.bz2
upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.zip
brcm2708: add kernel 4.14 support
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch')
-rw-r--r--target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch189
1 files changed, 189 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch b/target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch
new file mode 100644
index 0000000000..eb3635a8f1
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0341-BCM283x-DT-Add-CSI-nodes-to-the-device-tree.patch
@@ -0,0 +1,189 @@
+From ca576b3fd93dff35bdf39f5fd44edf938e545ac9 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Thu, 5 Jul 2018 16:43:56 +0100
+Subject: [PATCH 341/454] BCM283x DT: Add CSI nodes to the device tree.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm2708-rpi.dtsi | 8 ++++++
+ arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi-zero.dts | 1 +
+ arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 ++++++
+ arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
+ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 +
+ arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi | 7 +++++
+ arch/arm/boot/dts/bcm283x.dtsi | 28 +++++++++++++++++++
+ .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 +
+ 13 files changed, 60 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi
+ create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi
+
+--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
+@@ -160,3 +160,11 @@ sdhost_pins: &sdhost_gpio48 {
+ &vec {
+ status = "disabled";
+ };
++
++&csi0 {
++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
++};
++
++&csi1 {
++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+@@ -3,6 +3,7 @@
+ #include "bcm2835.dtsi"
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
+@@ -3,6 +3,7 @@
+ #include "bcm2835.dtsi"
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-a", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+@@ -4,6 +4,7 @@
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-smsc9514.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+@@ -4,6 +4,7 @@
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-smsc9512.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+@@ -4,6 +4,7 @@
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-smsc9512.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-b", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+@@ -13,6 +13,7 @@
+ #include "bcm2835.dtsi"
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-usb-otg.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+@@ -106,3 +106,11 @@
+ &dsi1 {
+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+ };
++
++&csi0 {
++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
++};
++
++&csi1 {
++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
++};
+--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+@@ -4,6 +4,7 @@
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-smsc9514.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+@@ -4,6 +4,7 @@
+ #include "bcm2835-rpi.dtsi"
+ #include "bcm283x-rpi-smsc9514.dtsi"
+ #include "bcm283x-rpi-usb-host.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+ / {
+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi
+@@ -0,0 +1,7 @@
++&csi1 {
++ port {
++ endpoint {
++ data-lanes = <1 2>;
++ };
++ };
++};
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -544,6 +544,34 @@
+ status = "disabled";
+ };
+
++ csi0: csi0@7e800000 {
++ compatible = "brcm,bcm2835-unicam";
++ reg = <0x7e800000 0x800>,
++ <0x7e802000 0x4>;
++ interrupts = <2 6>;
++ clocks = <&clocks BCM2835_CLOCK_CAM0>;
++ clock-names = "lp";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ #clock-cells = <1>;
++
++ status = "disabled";
++ };
++
++ csi1: csi1@7e801000 {
++ compatible = "brcm,bcm2835-unicam";
++ reg = <0x7e801000 0x800>,
++ <0x7e802004 0x4>;
++ interrupts = <2 7>;
++ clocks = <&clocks BCM2835_CLOCK_CAM1>;
++ clock-names = "lp";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ #clock-cells = <1>;
++
++ status = "disabled";
++ };
++
+ i2c1: i2c@7e804000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e804000 0x1000>;
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi
+@@ -0,0 +1,7 @@
++&csi1 {
++ port {
++ endpoint {
++ data-lanes = <1 2>;
++ };
++ };
++};