brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 64 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0268-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch b/target/linux/brcm2708/patches-4.14/950-0268-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch
new file mode 100644
index 0000000000..b0b75c18fd
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0268-lan78xx-Move-enabling-of-EEE-into-PHY-init-code.patch
@@ -0,0 +1,64 @@
+From b3fe724c76c37a1a3b7744b616a275b44754505f Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Thu, 5 Apr 2018 14:46:11 +0100
+Subject: [PATCH 268/454] lan78xx: Move enabling of EEE into PHY init code
+
+Enable EEE mode as soon as possible after connecting to the PHY, and
+before phy_start. This avoids a second link negotiation, which speeds
+up booting and stops the interface failing to become ready.
+
+See: https://github.com/raspberrypi/linux/issues/2437
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/net/usb/lan78xx.c | 32 ++++++++++++++++----------------
+ 1 file changed, 16 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/usb/lan78xx.c
++++ b/drivers/net/usb/lan78xx.c
+@@ -2073,6 +2073,22 @@ static int lan78xx_phy_init(struct lan78
+ 	mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
+ 	phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
+ 
++	if (of_property_read_bool(dev->udev->dev.of_node,
++				  "microchip,eee-enabled")) {
++		struct ethtool_eee edata;
++		memset(&edata, 0, sizeof(edata));
++		edata.cmd = ETHTOOL_SEEE;
++		edata.advertised = ADVERTISED_1000baseT_Full |
++				   ADVERTISED_100baseT_Full;
++		edata.eee_enabled = true;
++		edata.tx_lpi_enabled = true;
++		if (of_property_read_u32(dev->udev->dev.of_node,
++					 "microchip,tx-lpi-timer",
++					 &edata.tx_lpi_timer))
++			edata.tx_lpi_timer = 600; /* non-aggressive */
++		(void)lan78xx_set_eee(dev->net, &edata);
++	}
++
+ 	/* Set LED modes:
+ 	 * led: 0=link/activity          1=link1000/activity
+ 	 *      2=link100/activity       3=link10/activity
+@@ -2536,22 +2552,6 @@ static int lan78xx_open(struct net_devic
+ 
+ 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+ 
+-	if (of_property_read_bool(dev->udev->dev.of_node,
+-				  "microchip,eee-enabled")) {
+-		struct ethtool_eee edata;
+-		memset(&edata, 0, sizeof(edata));
+-		edata.cmd = ETHTOOL_SEEE;
+-		edata.advertised = ADVERTISED_1000baseT_Full |
+-				   ADVERTISED_100baseT_Full;
+-		edata.eee_enabled = true;
+-		edata.tx_lpi_enabled = true;
+-		if (of_property_read_u32(dev->udev->dev.of_node,
+-					 "microchip,tx-lpi-timer",
+-					 &edata.tx_lpi_timer))
+-			edata.tx_lpi_timer = 600; /* non-aggressive */
+-		(void)lan78xx_set_eee(net, &edata);
+-	}
+-
+ 	/* for Link Check */
+ 	if (dev->urb_intr) {
+ 		ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL);