brcm2708: remove linux 4.14 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 352 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0264-Add-overlay-for-JEDEC-SPI-NOR-flash.patch b/target/linux/brcm2708/patches-4.14/950-0264-Add-overlay-for-JEDEC-SPI-NOR-flash.patch
deleted file mode 100644
index 50c04764f9..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0264-Add-overlay-for-JEDEC-SPI-NOR-flash.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From 0222de711db11507773604084e20ad6d6960d30b Mon Sep 17 00:00:00 2001
-From: wavelet2 <a3d35232@btinternet.com>
-Date: Mon, 26 Mar 2018 21:05:10 +0100
-Subject: [PATCH 264/454] Add overlay for JEDEC SPI NOR flash
-
----
- arch/arm/boot/dts/overlays/Makefile           |   1 +
- arch/arm/boot/dts/overlays/README             |   9 +
- .../dts/overlays/jedec-spi-nor-overlay.dts    | 309 ++++++++++++++++++
- 3 files changed, 319 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -55,6 +55,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	iqaudio-dac.dtbo \
- 	iqaudio-dacplus.dtbo \
- 	iqaudio-digi-wm8804-audio.dtbo \
-+	jedec-spi-nor.dtbo \
- 	justboom-dac.dtbo \
- 	justboom-digi.dtbo \
- 	lirc-rpi.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -939,6 +939,15 @@ Params: card_name               Override
-                                 dai stream name.
- 
- 
-+Name:   jedec-spi-nor
-+Info:   Adds support for JEDEC-compliant SPI NOR flash devices.  (Note: The
-+        "jedec,spi-nor" kernel driver was formerly known as "m25p80".)
-+Load:   dtoverlay=jedec-spi-nor,<param>=<val>
-+Params: flash-spi<n>-<m>        Enables flash device on SPI<n>, CS#<m>.
-+        flash-fastr-spi<n>-<m>  Enables flash device with fast read capability
-+                                on SPI<n>, CS#<m>.
-+
-+
- Name:   justboom-dac
- Info:   Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio
-         cards
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts
-@@ -0,0 +1,309 @@
-+// Overlay for JEDEC SPI-NOR Flash Devices (aka m25p80)
-+
-+// dtparams:
-+//     flash-spi<n>-<m>        - Enables flash device on SPI<n>, CS#<m>.
-+//     flash-fastr-spi<n>-<m>  - Enables flash device with fast read capability on SPI<n>, CS#<m>.
-+//
-+// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
-+//
-+// Example: A single flash device with fast read capability on SPI0, CS#0:
-+// dtoverlay=jedec-spi-nor:flash-fastr-spi0-0
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	// disable spi-dev on spi0.0
-+	fragment@0 {
-+		target = <&spidev0>;
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi0.1
-+	fragment@1 {
-+		target = <&spidev1>;
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi1.0
-+	fragment@2 {
-+		target-path = "spi1/spidev@0";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi1.1
-+	fragment@3 {
-+		target-path = "spi1/spidev@1";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi1.2
-+	fragment@4 {
-+		target-path = "spi1/spidev@2";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi2.0
-+	fragment@5 {
-+		target-path = "spi2/spidev@0";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi2.1
-+	fragment@6 {
-+		target-path = "spi2/spidev@1";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// disable spi-dev on spi2.2
-+	fragment@7 {
-+		target-path = "spi2/spidev@2";
-+		__dormant__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	// enable flash on spi0.0
-+	fragment@8 {
-+		target = <&spi0>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_00: spi_nor@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <0>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi0.1
-+	fragment@9 {
-+		target = <&spi0>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_01: spi_nor@1 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <1>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi1.0
-+	fragment@10 {
-+		target = <&spi1>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_10: spi_nor@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <0>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi1.1
-+	fragment@11 {
-+		target = <&spi1>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_11: spi_nor@1 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <1>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi1.2
-+	fragment@12 {
-+		target = <&spi1>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_12: spi_nor@2 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <2>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi2.0
-+	fragment@13 {
-+		target = <&spi2>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_20: spi_nor@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <0>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi2.1
-+	fragment@14 {
-+		target = <&spi2>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_21: spi_nor@1 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <1>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// enable flash on spi2.2
-+	fragment@15 {
-+		target = <&spi2>;
-+		__dormant__ {
-+			status = "okay";
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+			spi_nor_22: spi_nor@2 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "jedec,spi-nor";
-+				reg = <2>;
-+				spi-max-frequency = <500000>;
-+			};
-+		};
-+	};
-+
-+	// Enable fast read for device on spi0.0.
-+	// Use default active low interrupt signalling.
-+	fragment@16 {
-+		target = <&spi_nor_00>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi0.1.
-+	// Use default active low interrupt signalling.
-+	fragment@17 {
-+		target = <&spi_nor_01>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi1.0.
-+	// Use default active low interrupt signalling.
-+	fragment@18 {
-+		target = <&spi_nor_10>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi1.1.
-+	// Use default active low interrupt signalling.
-+	fragment@19 {
-+		target = <&spi_nor_11>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi1.2.
-+	// Use default active low interrupt signalling.
-+	fragment@20 {
-+		target = <&spi_nor_12>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi2.0.
-+	// Use default active low interrupt signalling.
-+	fragment@21 {
-+		target = <&spi_nor_20>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi2.1.
-+	// Use default active low interrupt signalling.
-+	fragment@22 {
-+		target = <&spi_nor_21>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	// Enable fast read for device on spi2.2.
-+	// Use default active low interrupt signalling.
-+	fragment@23 {
-+		target = <&spi_nor_22>;
-+		__dormant__ {
-+			m25p,fast-read;
-+		};
-+	};
-+
-+	__overrides__ {
-+		flash-spi0-0       = <0>,"+0+8";
-+		flash-spi0-1       = <0>,"+1+9";
-+		flash-spi1-0       = <0>,"+2+10";
-+		flash-spi1-1       = <0>,"+3+11";
-+		flash-spi1-2       = <0>,"+4+12";
-+		flash-spi2-0       = <0>,"+5+13";
-+		flash-spi2-1       = <0>,"+6+14";
-+		flash-spi2-2       = <0>,"+7+15";
-+		flash-fastr-spi0-0 = <0>,"+0+8+16";
-+		flash-fastr-spi0-1 = <0>,"+1+9+17";
-+		flash-fastr-spi1-0 = <0>,"+2+10+18";
-+		flash-fastr-spi1-1 = <0>,"+3+11+19";
-+		flash-fastr-spi1-2 = <0>,"+4+12+20";
-+		flash-fastr-spi2-0 = <0>,"+5+13+21";
-+		flash-fastr-spi2-1 = <0>,"+6+14+22";
-+		flash-fastr-spi2-2 = <0>,"+7+15+23";
-+	};
-+};
-+