brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 71 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0189-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch b/target/linux/brcm2708/patches-4.14/950-0189-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch
new file mode 100644
index 0000000000..2f215c33cc
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0189-drm-vc4-Remove-duplicate-primary-cursor-fields-from-.patch
@@ -0,0 +1,71 @@
+From cb4fe9fe655a0d6685be00e926842a25bc48b920 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 5 Feb 2018 18:22:03 +0000
+Subject: [PATCH 189/454] drm/vc4: Remove duplicate primary/cursor fields from
+ FKMS driver.
+
+The CRTC has those fields and we can just use them.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/gpu/drm/vc4/vc4_firmware_kms.c | 24 +++++++-----------------
+ 1 file changed, 7 insertions(+), 17 deletions(-)
+
+--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c
++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c
+@@ -37,8 +37,6 @@ struct vc4_crtc {
+ 	struct drm_crtc base;
+ 	struct drm_encoder *encoder;
+ 	struct drm_connector *connector;
+-	struct drm_plane *primary;
+-	struct drm_plane *cursor;
+ 	void __iomem *regs;
+ 
+ 	struct drm_pending_vblank_event *event;
+@@ -356,29 +354,24 @@ static void vc4_crtc_mode_set_nofb(struc
+ 
+ static void vc4_crtc_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
+ {
+-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+-
+ 	/* Always turn the planes off on CRTC disable. In DRM, planes
+ 	 * are enabled/disabled through the update/disable hooks
+ 	 * above, and the CRTC enable/disable independently controls
+ 	 * whether anything scans out at all, but the firmware doesn't
+ 	 * give us a CRTC-level control for that.
+ 	 */
+-	vc4_cursor_plane_atomic_disable(vc4_crtc->cursor,
+-					vc4_crtc->cursor->state);
+-	vc4_plane_set_primary_blank(vc4_crtc->primary, true);
++	vc4_cursor_plane_atomic_disable(crtc->cursor, crtc->cursor->state);
++	vc4_plane_set_primary_blank(crtc->primary, true);
+ }
+ 
+ static void vc4_crtc_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
+ {
+-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+-
+ 	/* Unblank the planes (if they're supposed to be displayed). */
+-	if (vc4_crtc->primary->state->fb)
+-		vc4_plane_set_primary_blank(vc4_crtc->primary, false);
+-	if (vc4_crtc->cursor->state->fb) {
+-		vc4_cursor_plane_atomic_update(vc4_crtc->cursor,
+-					       vc4_crtc->cursor->state);
++	if (crtc->primary->state->fb)
++		vc4_plane_set_primary_blank(crtc->primary, false);
++	if (crtc->cursor->state->fb) {
++		vc4_cursor_plane_atomic_update(crtc->cursor,
++					       crtc->cursor->state);
+ 	}
+ }
+ 
+@@ -689,9 +682,6 @@ static int vc4_fkms_bind(struct device *
+ 	primary_plane->crtc = crtc;
+ 	cursor_plane->crtc = crtc;
+ 
+-	vc4_crtc->primary = primary_plane;
+-	vc4_crtc->cursor = cursor_plane;
+-
+ 	vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL);
+ 	if (!vc4_encoder)
+ 		return -ENOMEM;