brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 142 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0169-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch b/target/linux/brcm2708/patches-4.14/950-0169-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch
new file mode 100644
index 0000000000..cfc48364ff
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0169-irqchip-irq-bcm2836-Remove-regmap-and-syscon-use.patch
@@ -0,0 +1,142 @@
+From bb79a484a01f8f3645bd9b8fc6b15ea0ba961589 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 23 Jan 2018 16:52:45 +0000
+Subject: [PATCH 169/454] irqchip: irq-bcm2836: Remove regmap and syscon use
+
+The syscon node defines a register range that duplicates that used by
+the local_intc node on bcm2836/7. Since irq-bcm2835 and irq-bcm2836 are
+built in and always present together (both drivers are enabled by
+CONFIG_ARCH_BCM2835), it is possible to replace the syscon usage with a
+global variable that simplifies the code. Doing so does lose the
+locking provided by regmap, but as only one side is using the regmap
+interface (irq-bcm2835 uses readl and write) there is no loss of
+atomicity.
+
+See: https://github.com/raspberrypi/firmware/issues/926
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/bcm2709.dtsi |  5 -----
+ arch/arm/boot/dts/bcm2710.dtsi |  5 -----
+ drivers/irqchip/irq-bcm2835.c  | 32 ++++++++++++--------------------
+ drivers/irqchip/irq-bcm2836.c  |  5 +++++
+ 4 files changed, 17 insertions(+), 30 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm2709.dtsi
++++ b/arch/arm/boot/dts/bcm2709.dtsi
+@@ -6,11 +6,6 @@
+ 	soc {
+ 		ranges = <0x7e000000 0x3f000000 0x01000000>,
+ 		         <0x40000000 0x40000000 0x00040000>;
+-
+-		syscon@40000000 {
+-			compatible = "brcm,bcm2836-arm-local", "syscon";
+-			reg = <0x40000000 0x100>;
+-		};
+ 	};
+ 
+ 	__overrides__ {
+--- a/arch/arm/boot/dts/bcm2710.dtsi
++++ b/arch/arm/boot/dts/bcm2710.dtsi
+@@ -16,11 +16,6 @@
+ 			interrupt-parent = <&local_intc>;
+ 			interrupts = <9>;
+ 		};
+-
+-		syscon@40000000 {
+-			compatible = "brcm,bcm2836-arm-local", "syscon";
+-			reg = <0x40000000 0x100>;
+-		};
+ 	};
+ 
+ 	__overrides__ {
+--- a/drivers/irqchip/irq-bcm2835.c
++++ b/drivers/irqchip/irq-bcm2835.c
+@@ -50,8 +50,6 @@
+ #include <linux/of_irq.h>
+ #include <linux/irqchip.h>
+ #include <linux/irqdomain.h>
+-#include <linux/mfd/syscon.h>
+-#include <linux/regmap.h>
+ 
+ #include <asm/exception.h>
+ #ifndef CONFIG_ARM64
+@@ -103,7 +101,7 @@ struct armctrl_ic {
+ 	void __iomem *enable[NR_BANKS];
+ 	void __iomem *disable[NR_BANKS];
+ 	struct irq_domain *domain;
+-	struct regmap *local_regmap;
++	void __iomem *local_base;
+ };
+ 
+ static struct armctrl_ic intc __read_mostly;
+@@ -140,24 +138,20 @@ static void armctrl_unmask_irq(struct ir
+ 	if (d->hwirq >= NUMBER_IRQS) {
+ 		if (num_online_cpus() > 1) {
+ 			unsigned int data;
+-			int ret;
+ 
+-			if (!intc.local_regmap) {
+-				pr_err("FIQ is disabled due to missing regmap\n");
++			if (!intc.local_base) {
++				pr_err("FIQ is disabled due to missing arm_local_intc\n");
+ 				return;
+ 			}
+ 
+-			ret = regmap_read(intc.local_regmap,
+-					  ARM_LOCAL_GPU_INT_ROUTING, &data);
+-			if (ret) {
+-				pr_err("Failed to read int routing %d\n", ret);
+-				return;
+-			}
++			data = readl_relaxed(intc.local_base +
++					     ARM_LOCAL_GPU_INT_ROUTING);
+ 
+ 			data &= ~0xc;
+ 			data |= (1 << 2);
+-			regmap_write(intc.local_regmap,
+-				     ARM_LOCAL_GPU_INT_ROUTING, data);
++			writel_relaxed(data,
++				       intc.local_base +
++				       ARM_LOCAL_GPU_INT_ROUTING);
+ 		}
+ 
+ 		writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq),
+@@ -256,12 +250,10 @@ static int __init armctrl_of_init(struct
+ 	}
+ 
+ 	if (is_2836) {
+-		intc.local_regmap =
+-			syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local");
+-		if (IS_ERR(intc.local_regmap)) {
+-			pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n");
+-			intc.local_regmap = NULL;
+-		}
++		extern void __iomem * __attribute__((weak)) arm_local_intc;
++		intc.local_base = arm_local_intc;
++		if (!intc.local_base)
++			pr_err("Failed to get local intc base. FIQ is disabled for cpus > 1\n");
+ 	}
+ 
+ 	/* Make a duplicate irq range which is used to enable FIQ */
+--- a/drivers/irqchip/irq-bcm2836.c
++++ b/drivers/irqchip/irq-bcm2836.c
+@@ -83,6 +83,9 @@ struct bcm2836_arm_irqchip_intc {
+ 
+ static struct bcm2836_arm_irqchip_intc intc  __read_mostly;
+ 
++void __iomem *arm_local_intc;
++EXPORT_SYMBOL_GPL(arm_local_intc);
++
+ static void bcm2836_arm_irqchip_mask_per_cpu_irq(unsigned int reg_offset,
+ 						 unsigned int bit,
+ 						 int cpu)
+@@ -310,6 +313,8 @@ static int __init bcm2836_arm_irqchip_l1
+ 		panic("%pOF: unable to map local interrupt registers\n", node);
+ 	}
+ 
++	arm_local_intc = intc.base;
++
+ 	bcm2835_init_local_timer_frequency();
+ 
+ 	intc.domain = irq_domain_add_linear(node, LAST_IRQ + 1,