brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 43 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0166-mmc-bcm2835-sdhost-Support-underclocking.patch b/target/linux/brcm2708/patches-4.14/950-0166-mmc-bcm2835-sdhost-Support-underclocking.patch
new file mode 100644
index 0000000000..feca38df3a
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0166-mmc-bcm2835-sdhost-Support-underclocking.patch
@@ -0,0 +1,43 @@
+From c03a6b0585e7c469c199d349405b3967bcf18672 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 22 Jan 2018 12:17:27 +0000
+Subject: [PATCH 166/454] mmc: bcm2835-sdhost: Support underclocking
+
+Support underclocking of the SD bus in two ways:
+1. using the max-frequency DT property (which currently has no DT
+   parameter), and
+2. using the exiting sd_overclock parameter.
+
+The two methods differ slightly - in the former the MMC subsystem is
+aware of the underclocking, while in the latter it isn't - but the
+end results should be the same.
+
+See: https://github.com/raspberrypi/linux/issues/2350
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/mmc/host/bcm2835-sdhost.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/mmc/host/bcm2835-sdhost.c
++++ b/drivers/mmc/host/bcm2835-sdhost.c
+@@ -1519,8 +1519,7 @@ void bcm2835_sdhost_set_clock(struct bcm
+ 	if (host->debug)
+ 		pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock);
+ 
+-	if ((host->overclock_50 > 50) &&
+-	    (clock == 50*MHZ))
++	if (host->overclock_50 && (clock == 50*MHZ))
+ 		clock = host->overclock_50 * MHZ + (MHZ - 1);
+ 
+ 	/* The SDCDIV register has 11 bits, and holds (div - 2).
+@@ -1894,7 +1893,8 @@ int bcm2835_sdhost_add_host(struct bcm28
+ 
+ 	mmc = host->mmc;
+ 
+-	mmc->f_max = host->max_clk;
++	if (!mmc->f_max || mmc->f_max > host->max_clk)
++		mmc->f_max = host->max_clk;
+ 	mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
+ 
+ 	mmc->max_busy_timeout =  (~(unsigned int)0)/(mmc->f_max/1000);