brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 81 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0159-overlays-Add-uart0-overlay-to-change-pin-usage.patch b/target/linux/brcm2708/patches-4.14/950-0159-overlays-Add-uart0-overlay-to-change-pin-usage.patch
new file mode 100644
index 0000000000..a2a30e9059
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0159-overlays-Add-uart0-overlay-to-change-pin-usage.patch
@@ -0,0 +1,81 @@
+From f0f4af3ddb0fc5ea529c0147ebf8be47b1a80335 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Fri, 12 Jan 2018 09:15:01 +0000
+Subject: [PATCH 159/454] overlays: Add uart0 overlay to change pin usage
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/overlays/Makefile          |  1 +
+ arch/arm/boot/dts/overlays/README            | 13 +++++++-
+ arch/arm/boot/dts/overlays/uart0-overlay.dts | 32 ++++++++++++++++++++
+ 3 files changed, 45 insertions(+), 1 deletion(-)
+ create mode 100755 arch/arm/boot/dts/overlays/uart0-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -117,6 +117,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	spi2-2cs.dtbo \
+ 	spi2-3cs.dtbo \
+ 	tinylcd35.dtbo \
++	uart0.dtbo \
+ 	uart1.dtbo \
+ 	vc4-fkms-v3d.dtbo \
+ 	vc4-kms-v3d.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1671,8 +1671,19 @@ Params: speed                   Display
+                 dtoverlay=tinylcd35,touch,touchgpio=3
+ 
+ 
++Name:   uart0
++Info:   Change the pin usage of uart0
++Load:   dtoverlay=uart0,<param>=<val>
++Params: txd0_pin                GPIO pin for TXD0 (14, 32 or 36 - default 14)
++
++        rxd0_pin                GPIO pin for RXD0 (15, 33 or 37 - default 15)
++
++        pin_func                Alternative pin function - 4(Alt0) for 14&15,
++                                7(Alt3) for 32&33, 6(Alt2) for 36&37
++
++
+ Name:   uart1
+-Info:   Enable uart1 in place of uart0
++Info:   Change the pin usage of uart1
+ Load:   dtoverlay=uart1,<param>=<val>
+ Params: txd1_pin                GPIO pin for TXD1 (14, 32 or 40 - default 14)
+ 
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts
+@@ -0,0 +1,32 @@
++/dts-v1/;
++/plugin/;
++
++/{
++	compatible = "brcm,bcm2708";
++
++	fragment@0 {
++		target = <&uart0>;
++		__overlay__ {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart0_pins>;
++			status = "okay";
++		};
++	};
++
++	fragment@1 {
++		target = <&gpio>;
++		__overlay__ {
++			uart0_pins: uart0_pins {
++				brcm,pins = <14 15>;
++				brcm,function = <4>; /* alt0 */
++				brcm,pull = <0 2>;
++			};
++		};
++	};
++
++	__overrides__ {
++		txd0_pin = <&uart0_pins>,"brcm,pins:0";
++		rxd0_pin = <&uart0_pins>,"brcm,pins:4";
++		pin_func = <&uart0_pins>,"brcm,function:0";
++	};
++};