brcm2708: remove linux 4.14 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 190 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch b/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch
deleted file mode 100644
index 7c13ae3182..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0143-overlays-Add-media-center-HAT-overlay-2313.patch
+++ /dev/null
@@ -1,190 +0,0 @@
-From 15aa7a1d49c20f7f41b5c69cea2f46e1e976e660 Mon Sep 17 00:00:00 2001
-From: Aaron Shaw <shawaj@gmail.com>
-Date: Sun, 24 Dec 2017 21:57:05 +0000
-Subject: [PATCH 143/454] overlays: Add media center HAT overlay (#2313)
-
----
- arch/arm/boot/dts/overlays/Makefile           |   1 +
- arch/arm/boot/dts/overlays/README             |  24 ++++
- .../dts/overlays/media-center-overlay.dts     | 132 ++++++++++++++++++
- 3 files changed, 157 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -61,6 +61,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	mcp2515-can0.dtbo \
- 	mcp2515-can1.dtbo \
- 	mcp3008.dtbo \
-+	media-center.dtbo \
- 	midi-uart0.dtbo \
- 	midi-uart1.dtbo \
- 	mmc.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -994,6 +994,30 @@ Params: spi<n>-<m>-present      boolean,
-         spi<n>-<m>-speed        integer, set the spi bus speed for this device
- 
- 
-+Name:   media-center
-+Info:   Media Center HAT - 2.83" Touch Display + extras by Pi Supply
-+Load:   dtoverlay=media-center,<param>=<val>
-+Params: speed                   Display SPI bus speed
-+        rotate                  Display rotation {0,90,180,270}
-+        fps                     Delay between frame updates
-+        xohms                   Touchpanel sensitivity (X-plate resistance)
-+        swapxy                  Swap x and y axis
-+        gpio_out_pin            GPIO for output (default "17")
-+        gpio_in_pin             GPIO for input (default "18")
-+        gpio_in_pull            Pull up/down/off on the input pin
-+                                (default "down")
-+        sense                   Override the IR receive auto-detection logic:
-+                                 "0" = force active-high
-+                                 "1" = force active-low
-+                                 "-1" = use auto-detection
-+                                (default "-1")
-+        softcarrier             Turn the software carrier "on" or "off"
-+                                (default "on")
-+        invert                  "on" = invert the output pin (default "off")
-+        debug                   "on" = enable additional debug messages
-+                                (default "off")
-+
-+
- Name:   midi-uart0
- Info:   Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets
-         31.25kbaud, the frequency required for MIDI
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts
-@@ -0,0 +1,132 @@
-+/*
-+ * Device Tree overlay for Media Center HAT by Pi Supply
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			spidev@0{
-+				status = "disabled";
-+			};
-+
-+			spidev@1{
-+				status = "disabled";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			rpi_display_pins: rpi_display_pins {
-+				brcm,pins = <12 23 24 25>;
-+				brcm,function = <1 1 1 0>; /* out out out in */
-+				brcm,pull = <0 0 0 2>; /* - - - up */
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rpidisplay: rpi-display@0{
-+				compatible = "ilitek,ili9341";
-+				reg = <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&rpi_display_pins>;
-+
-+				spi-max-frequency = <32000000>;
-+				rotate = <90>;
-+				bgr;
-+				fps = <30>;
-+				buswidth = <8>;
-+				reset-gpios = <&gpio 23 0>;
-+				dc-gpios = <&gpio 24 0>;
-+				led-gpios = <&gpio 12 1>;
-+				debug = <0>;
-+			};
-+
-+			rpidisplay_ts: rpi-display-ts@1 {
-+				compatible = "ti,ads7846";
-+				reg = <1>;
-+
-+				spi-max-frequency = <2000000>;
-+				interrupts = <25 2>; /* high-to-low edge triggered */
-+				interrupt-parent = <&gpio>;
-+				pendown-gpio = <&gpio 25 0>;
-+				ti,x-plate-ohms = /bits/ 16 <60>;
-+				ti,pressure-max = /bits/ 16 <255>;
-+			};
-+		};
-+	};
-+
-+	fragment@3 {
-+		target-path = "/";
-+		__overlay__ {
-+			lirc_rpi: lirc_rpi {
-+				compatible = "rpi,lirc-rpi";
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&lirc_pins>;
-+				status = "okay";
-+
-+				// Override autodetection of IR receiver circuit
-+				// (0 = active high, 1 = active low, -1 = no override )
-+				rpi,sense = <0xffffffff>;
-+
-+				// Software carrier
-+				// (0 = off, 1 = on)
-+				rpi,softcarrier = <1>;
-+
-+				// Invert output
-+				// (0 = off, 1 = on)
-+				rpi,invert = <0>;
-+
-+				// Enable debugging messages
-+				// (0 = off, 1 = on)
-+				rpi,debug = <0>;
-+			};
-+		};
-+	};
-+
-+	fragment@4 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			lirc_pins: lirc_pins {
-+				brcm,pins = <6 5>;
-+				brcm,function = <1 0>; // out in
-+				brcm,pull = <0 1>; // off down
-+			};
-+		};
-+	};
-+
-+	__overrides__ {
-+		speed =   <&rpidisplay>,"spi-max-frequency:0";
-+		rotate =  <&rpidisplay>,"rotate:0";
-+		fps =     <&rpidisplay>,"fps:0";
-+		debug =   <&rpidisplay>,"debug:0",
-+		          <&lirc_rpi>,"rpi,debug:0";
-+		xohms =   <&rpidisplay_ts>,"ti,x-plate-ohms;0";
-+		swapxy =  <&rpidisplay_ts>,"ti,swap-xy?";
-+
-+		gpio_out_pin =  <&lirc_pins>,"brcm,pins:0";
-+		gpio_in_pin =   <&lirc_pins>,"brcm,pins:4";
-+		gpio_in_pull =  <&lirc_pins>,"brcm,pull:4";
-+
-+		sense =         <&lirc_rpi>,"rpi,sense:0";
-+		softcarrier =   <&lirc_rpi>,"rpi,softcarrier:0";
-+		invert =        <&lirc_rpi>,"rpi,invert:0";
-+	};
-+};