brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 50 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0120-cache-export-clean-and-invalidate.patch b/target/linux/brcm2708/patches-4.14/950-0120-cache-export-clean-and-invalidate.patch
new file mode 100644
index 0000000000..bbab89fd6f
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0120-cache-export-clean-and-invalidate.patch
@@ -0,0 +1,50 @@
+From ef48045e357c3ec1bb9a434fac0c814f8a8669ef Mon Sep 17 00:00:00 2001
+From: popcornmix <popcornmix@gmail.com>
+Date: Fri, 25 Aug 2017 19:18:13 +0100
+Subject: [PATCH 120/454] cache: export clean and invalidate
+
+---
+ arch/arm/mm/cache-v6.S | 4 ++--
+ arch/arm/mm/cache-v7.S | 4 ++--
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/mm/cache-v6.S
++++ b/arch/arm/mm/cache-v6.S
+@@ -201,7 +201,7 @@ ENTRY(v6_flush_kern_dcache_area)
+  *	- start   - virtual start address of region
+  *	- end     - virtual end address of region
+  */
+-v6_dma_inv_range:
++ENTRY(v6_dma_inv_range)
+ #ifdef CONFIG_DMA_CACHE_RWFO
+ 	ldrb	r2, [r0]			@ read for ownership
+ 	strb	r2, [r0]			@ write for ownership
+@@ -246,7 +246,7 @@ v6_dma_inv_range:
+  *	- start   - virtual start address of region
+  *	- end     - virtual end address of region
+  */
+-v6_dma_clean_range:
++ENTRY(v6_dma_clean_range)
+ 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+ 1:
+ #ifdef CONFIG_DMA_CACHE_RWFO
+--- a/arch/arm/mm/cache-v7.S
++++ b/arch/arm/mm/cache-v7.S
+@@ -349,7 +349,7 @@ ENDPROC(v7_flush_kern_dcache_area)
+  *	- start   - virtual start address of region
+  *	- end     - virtual end address of region
+  */
+-v7_dma_inv_range:
++ENTRY(v7_dma_inv_range)
+ 	dcache_line_size r2, r3
+ 	sub	r3, r2, #1
+ 	tst	r0, r3
+@@ -377,7 +377,7 @@ ENDPROC(v7_dma_inv_range)
+  *	- start   - virtual start address of region
+  *	- end     - virtual end address of region
+  */
+-v7_dma_clean_range:
++ENTRY(v7_dma_clean_range)
+ 	dcache_line_size r2, r3
+ 	sub	r3, r2, #1
+ 	bic	r0, r0, r3